Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Before sending any command, the tester shall wait for this event
indicating that IUT is ready to accept first BTP command.
This is needed, because some devices need more time to initialize
their stacks, so that the first BTP command can be lost.
Change-Id: I92d1c6ea8be905734037eb29f7f270a70ab1583e
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Buffers pool has to be increased for all configurations.
Change-Id: Id24caced5043c1672ca5f753d1e86d9a72c728ea
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
TP/GAW/SR/BV-10-C test case requires two long values to perform
nested prepare write operation. Using one ATT Execute Write command
this two values are going to be written simultaneously.
Change-Id: I2950409ed8f1d121dcc706b432cdf071b9af00c0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_GATT_INCLUDE_SERVICE user_data shall point to the service declaration
of service to be included. So user_data_len shall be set to 0 to avoid
copying the contents of bt_gatt_attr to the server_buf, and just use
pointer to the actual attribute.
Change-Id: Id770daeb6d64644c51f2bc5d3962dd80363ec8c3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
attr pointer is local here, so it may be overwritten anytime, because
this attribute user_data will be used out of scobe of this function.
Change-Id: I85b390299980dac213d8ce1939078fe8b242c887
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There is no need for any prepare write variables as this is now handled
transparently by the stack and so any errors that happens during write
shall be reported in the return.
Change-Id: I3e629016cb7f5f6cd9106ff07c3cbb464e81734f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes invalid cast from struct bt_gatt_attr to bt_gatt_chrc.
Change-Id: Idc2c016e26b5d38d2d4772a7bd79af8357a4da58
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Returned by flush_value function value should be length of data which
are previously prepared by prepare write requests.
Change-Id: Iacfc63527c68cf20a76a4587acc749bd2d00cffd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch fixes returning invalid offset, invalid attribute length
error. Error should be set during prepare write and returned in
response to execute write request as error response.
Change-Id: I78c57abc5f6f2fbd4a2c0fbb1ee6532212679a36
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
BTP API allows to set only advertising and scan response data without
declaring advertising type. Advertising type is deduced from current
flags status. Scan response data is static in tester - to set non
connectable mode in current BTP API scan response length must be
considered.
Change-Id: I742cd8ec774c24f317d639835844a4743bb25445
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some IUTs may have predefined attributes in db which aren't take into
consideration while building via tester database. BTP clients should
know about such attribute handle offset change. After start server
we're sure that none of attributes will be added since zephyr db is
constant.
Change-Id: Ia2c6edaa7a2f3ca4a9c88fe00122c808a529dadb
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This patch reorganize tester gatt commands to handle also sequence
builded gatt data base
Change-Id: I5fc89c1c498dd2ecf3999bc93e3caffd14f67cb7
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the guidelines for the tester application building usage.
Change-Id: Ibcd31b7bed827f8eee99fdf21d3bb1e8edd24d2e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
With this patch net_buf based heap will be used to store attribute
user_data and UUID. This is the first step to remove gatt_buf.
Change-Id: I578f26b781e01f5f3464c05f7210dc27cdea8edf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Most iuts data base are intended to have its attribute database builded
in sequence and its constant (except attribute values, parameters,
permissions). Patch allows btp specification to cover also devices
which cannot assign an ID right after issuing add attribute command or
set attribute component (which points to defined attribute ID).
Change-Id: Ie8e5ed223609cca2b6e3fb8444065f33b1408142
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now start discovery GAP function interprets scan type flags (active,
passive) and starts discovery with specific LE scan parameters.
Change-Id: Iecb942e24d68790966afe893d3543433c33192dc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Since user_data can be added with gatt_db_add, Set Value
command handler can be simplified.
Change-Id: I86d3ed411cc897488e9073492ff85e0754b2ab93
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this patch BTP error will be returned if attribute with
requested ID don't exist in GATT attribute database.
Change-Id: Ic6125c6359e75a80fb9a51b6a527ee0a98628e6d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support for get supported commands of l2cap service.
Change-Id: Ic3e2b6502c05a5784d1fd01af0e47cce11e6d2c9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds initial declaration of l2cap service in tester
application.
Change-Id: I9bd729bc351b2fe135e7b5b80262b45eaf70b10b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch makes adding attributes more clean.
Attribute UUID and user data are now added along with the attribute
in gatt_db_add function. Thanks to that, some static variables have
been deleted, and the code is more readable.
Change-Id: I510bd7a1a9ae0210dd90520212a340ee1a3b2b53
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bluetooth/shell and bluetooth/tester need to be disabled on
galileo and minnowboard respectively. On these platforms,
the IRQ for the UART console and the H4 are the same IRQ line.
IRQ_CONNECT() is being called on the same IRQ line twice, and
it's only through linker luck that these tests work at all
since one driver will "win" when the mapping is set up at build
time by gen_idt.
gen_idt was supposed to break the build in this situation but
was bugged. The next patch in the series fixes gen_idt.
Change-Id: Ib4a42b57181731121dfad50606c8362a9fd0277d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GAP_CONNECT bit was missing in supported commands.
Change-Id: I9d009c55327ae67bed38c45b7c11fb67665e1cd0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes opcodes to be in the sequence.
Supported commmands is form now uint8_t array, so this resolves
the problem with endianess as well.
Change-Id: I602a58081948dbbf5e0d83cbb12a118a5990b9f8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
CCC user data is already available on the initialization
(struct bt_gatt_ccc_cfg and ccc_cfg_changed callback).
Change-Id: Id06c69b6da33f651bc049983179cd6fe3bc197d6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes a bit of redundant code.
gatt_buf_reserve can call gatt_buf_add with data set to NULL, to
reserve space on gatt_buf.
Change-Id: I533a515bbd022a07ba8e2bfb3cd07e1a9ff8878b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Defined BT_UUID for the header can be used instead of struct member.
Change-Id: I55ca069d04622450e4fbb1e3f7abf6fdef2f8f30
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no point having separate handlers for signed writes and
write without response commands because both call the same,
bt_gatt_write_without_response function.
Change-Id: Ib033ffb77e2123dd565e8f1119ef668253f810f9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This splits Authorization permission to Read with Authorization
and Write with Authorization.
Some attribites may be readable with no authorizarion, but writable
with authorization defined by a higher layer specification or be
implementation specific (eg. Server Characteristic Configuration
Descriptor).
Change-Id: I341a7095c1e8db1dea92cdeebf76c5a2307a49a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
