When parsing user input for "wifi connect" and "wifi ap enable"
commands, the SSID and PSK lengths were not verified. It's better to
detect invalid connect/AP enable parameters early, so that help text can
be printed, instead of letting wifi_mgmt command to fail.
For WIFI_SECURITY_TYPE_SAE, follow the Linux convention of limiting the
size to 128 bytes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `attr_get` method is added to the ieee802154_radio to allow
reading of driver specific attributes of given device.
The enum `ieee802154_attr` provides common extension pattern
allowing to extend the attribute set.
Accessor function `ieee802154_radio_attr_get` is provided.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Associate command handler did not validate the provided address length.
In result, if provided address string was longer than the expected
extended address size, strncpy() would not NULL terminate the buffer,
which could lead to unexpected behavior in parse_extended_address(), as
it expects NULL terminated string.
Fix this by validating the length of the provided address string before
parsing.
Additionally, make parse_extended_address() return the parsing result,
so that it can be detected when provided extended address has incorrect
format.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Linuxptp report UTC offset is 9472 seconds, is a byte order issue,
The right value is 37. Also fixed offset_scaled_log_var byte order.
Signed-off-by: Chen Caidy <chen@caidy.cc>
According to IEEE802.1AS Table 11-6 and 10.6.2.2.9,
802.1AS using peer-to-peer delay mechanism, two-step clock,
Grand master clock should keep this correction_field as zero.
Signed-off-by: Chen Caidy <chen@caidy.cc>
According to IEEE802.1AS 11.4.4.2.1, we need fill
preciseOriginTimestamp as syncEventEgressTimestamp.
In this follow_up message, prec_orig_ts need to filled
from net_pkt_timestamp(sync) for best accuracy. state machine
is software trigger with insufficient precision.
After this change, a grand master endpoint sync accuracy
increase from 3.5ms to 580ns with mimxrt1050_evk board.
Signed-off-by: Chen Caidy <chen@caidy.cc>
Use the macro to print to handle for cases where shell context is NULL,
this is possible because in this net management event handler shell
context is not passed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Check if a network interface is managed by a network manager before
falling back to offload API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This introduces support for Wi-Fi network managers in Zephyr. The
motivation is for the Wi-Fi management layer to work with both
Network managers and offloaded Wi-Fi drivers. The device driver
decides which one to use.
network manager : Apps -> Wi-Fi Mgmt -> Network Manager -> Wi-Fi
interface
offloaded : Apps -> Wi-Fi Mgmt -> Wi-Fi offloaded interface
Support for multiple network managers has been added, each device can
choose its own network manager and there can be mix and match:
wlan0 - Offloaded
wlan1 - Network manager 1
wlan2 - Network manager 2
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Decouple interface and Wi-Fi APIs, Wi-Fi APIs are common independent of
Wi-Fi offload or implemented natively (This is preparation for
introducing Native Wi-Fi).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Removes redundant ACK state from `struct ieee802154_context` and
simplifies the ACK procedure.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This change introduces test coverage for association request and
response. Based on this coverage, several closely related issues were
found in the association process which cannot be split into separate
changes without breaking the build.
Most notably did the associate and disassociate net_mgmt commands send
already encoded IEEE 802.15.4 MPDUs to L3 rather than L2. L3 treated
them as payload and made L2 wrap them with another LL header/footer
which produced invalid packets.
The tests also enforce better aligment of the association process with
the IEEE 802.15.4-2020 standard:
* Association requests now ask for ACK as required by the standard. The
fake driver was enhanced to produce ACK packages when requested.
* macPanId and macCoordinator* MAC PIB attributes are set in the right
order for improved filtering of association responses.
* The coordinator may decide not to assign a short address to the end
device even when associated. This is now supported.
* The coordinator may or may not use a short address. Coordinators
choosing not to support short addresses are now supported.
* Updating the association will now remove any previously added short
address from the hardware filter.
* The short address may no longer be changed by the user while
associated to a PAN. Only the coordinator is allowed to allocate short
addresses.
* Validation of outgoing and incoming association request/response
packets is improved.
All changes are documented by pointers into the spec.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Fixes an off-by-one bug in the parsing routine of the coordinator
address when associating via shell command.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Input validation of some of the IEEE 802.15.4 net_mgmt commands was
incomplete and/or inconsistent. This change introduces a consistent
approach to input validation that is easier to follow.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Calculates macResponseWaitTime and applies it to the association
process.
As the timing calculation re-uses symbol period calculations and other
PHY timing constants previously introduced, these are now shared as
utility functions.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The IEEE 802.15.4 stack defines radio API helpers that provide
simplified and encapsulated access to radio API features.
These helpers were missing the `_radio_` infix. This infix is introduced
to clearly distinguish between MAC and PHY concerns. While PHY features
may be shared between L2 implementations (including the functions
concerned here), this is not true for MAC features.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The IEEE 802.15.4-2020 standard introduces an association type field to
support fast association, see sections 6.4.3 and 7.5.2. We do not yet
implement fast association but we introduce the flag to make this
obvious.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Minor simplification in the definition of IEEE 802.15.4 Kconfig packet
fragmentation configuration.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
parse_number() helper function accepts long * pointer or the output,
however in several places, an address of a variable of incompatible
type was passed to the function (for example an address of a bool
variable was cast to (long *) and provided to the function). This
could cause memory overwrites or other unexpected behaviour.
Fix this, by defining a helper variable of type long, and use it with
the parse_number() function. Only after successful parsing, the value is
then assigned to the proper destination.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change replaces one letter variable names with considerable
variable spans by much more readable alternatives that ease code
maintenance and help human reviewers to catch semantic errors.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The f_ctx variable renamed in this change has a considerable variable
span. This makes the code hard to read as the variable name is neither
defined in the IEEE 802.15.4 standard nor can it be deduced from the
variable name.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The 'ar' abbreviation has a well defined meaning in IEEE 802.15.4 which
is NOT the meaning of the local "ar" variable being renamed in this
change (see the comparison to the actual MHR ar field in this change
set).
To avoid confusion, a non-abbreviated variable name is introduced
instead.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The 'af' abbreviation is nowhere standardized in IEEE 802.15.4 and makes
the source code unnecessarily hard to read. It is replaced by a readable
long name.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Several distinct naming conventions existed within the IEEE 802.15.4
stack wrt header length. This change converges to a single naming
convention, the one that is less ambiguous and already most used.
The change also makes the distinction between L2 (link layer/LL) header
length and 6LoWPAN fragmentation header length to avoid confusion.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This change is in preparation for the newer frame version's more
complex compression algorithm that may compress both, the source
and the destination PAN independently.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This change renames buf to pkt_buf in one very specific instance to
distinguish the packet buffer from the frame buffer which is kept in the
same local scope. In all other instances the meaning of "buf" should be
obvious from context, not so here, though
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Default scan mode is Active. User can force the scan mode to passive
through Kconfig option or using 'passive' option from shell.
Using either of this option will override regulatory settings and
forces all scan channels to be passive only.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Most AP's are not sending proper HE triggers or stopping triggers after
sometime, so, change the default to non-triggered based TWT.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Switch the driver to the soft CSMA/CA algorithm as an intermediate
compromise for improved standard compliance (namely expontential
backoff) until true hardware support can be implemented by chaining
radio commands.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The PAN ID in IEEE 802.15.4 frames is little endian while in the
IEEE 802.15.4 context it is kept in CPU byte order.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The ACK procedure had the following issues:
- MAC commands were not acknowledged.
- When the package is a broadcast package the package must not be
acknowledged.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Acknowledgment is mandatory if legitimately requested by the package's
"ACK requested" flag. The L2 layer will have to ensure that compliant
ACK packages will always be sent out automatically as required by the
standard.
For IEEE 802.15.4 compliance, the NET_L2_IEEE802154_ACK_REPLY option is
therefore being deprecated.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The existing calls to ieee802154_radio_send() and soft MAC ACK handling
were inconsistent and/or not properly integrated with more recent
radio driver capabilities as CSMA/CA and ACK in hardware.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The method ieee802154_radio_handle_ack() does not belong to the
PHY/radio layer but to the L2 layer. It is a callback called from the
radio layer into the L2 layer and to be implemented by all L2 stacks.
This is the same pattern as is used for ieee802154_init(). The
'_radio_' infix in this function is therefore confusing and
conceptually wrong.
This change fixes the naming inconsistency and extensively documents
its rationale.
It is assumed that the change can be made without prior deprecation of the
existing method as in the rare cases where users have implemented custom
radio drivers these will break in obvious ways and can easily be fixed.
Nevertheless such a rename would not be justified on its own if it were
not for an important conceptual reason:
The renamed function represents a generic "inversion-of-control" pattern
which will become important in the TSCH context: It allows for clean
separation of concerns between the PHY/radio driver layer and the
MAC/L2 layer even in situations where the radio driver needs to be
involved for performance or deterministic timing reasons. This
"inversion-of-control" pattern can be applied to negotiate timing
sensitive reception and transmission windows, it let's the L2 layer
deterministically timestamp information elements just-in-time with
internal radio timer counter values, etc.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The IEEE 802.15.4 standard clearly separates clear channel assessment
from retransmission. This separation of concern was not represented in
the current channel access vs. retransmission implementation which
resulted in considerable duplication of code and logic.
This change removes the duplication of logic and encapsulates the
resulting functions in a private API that may only be used from within
Zephyr's native L2 layer.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The CSMA/CA algorithm had multiple issues:
- Timing of backoff periods depends on the PHY's symbol rate and other
PHY-specific settings. We introduce a preliminary solution that works
with current drivers. A fully standard-compliant long-term solution
has already been conceptualized but requires further pre-conditions,
see #50336 (issuecomment-1251122582).
- We enforce the condition defined in the standard that macMinBe must be
less than or equal macMaxBe.
- According to the standard a CSMA/CA failure should lead to immediate
abortion of the transmission attempt, no matter how many
retransmissions have been configured.
- The number of retransmissions was off by one. It is now used as
defined in the standard algorithm.
- Retransmissions are only allowed when acknowledgement is requested in
the packet.
- prepare_for_ack() has side effects and must be called before each
retransmission.
We also replace variables by constants where possible.
The function was renamed as it represents unslotted CSMA/CA and does not
support other CSMA/CA modes. These may be introduced in the future.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The ALOHA algorithm had two minor implementation errors:
- The number of retransmissions was off by one.
- Retransmissions are only allowed when acknowledgement is requested
otherwise it is to be assumed that the transmission was successful.
- prepare_for_ack() has side effects and must be called before each
retransmission.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The allowable ranges of several CSMA/CA-related settings were not
conforming to the standard, see IEEE 802.15.4-2020, section
8.4.3.1, table 8-94 (MAC PIB attributes). This change fixes the ranges.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If a user tries to enable TWT too early in the connection, then we might
enter TWT sleep even before DHCP is completed, this can result in packet
loss as when we wakeup we cannot receive traffic and completing DHCP
itself can take multiple intervals. Though static ip address can be
assigned too. Reject TWT till Wi-Fi interface has
a valid IP address.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Currently, the L2 PPP subsystem is not using the network
interface subsystem appropriately. Here are the issues:
1. net_if_up hidden away internally in net L2 PPP
2. net_if_down not used at all...
3. net_if_carrier_on / off is not used, a workaround is
used instead, which results in duplicated code
4. L2 PPP does not listen for network events, instead
it needs the workaround callbacks from drivers.
5. The carrier_on workaround is delegated to a complex
and broken sys work queue item.
This commit fixes all above issues. net_if_up/down and
net_if_carrier_on/off now work as expected. workaround
for carrier_on/off has been removed.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Fix for not getting expected event information at application.
net_mgmt_event_notify_with_info() expects the address
not the value as pointer.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
A bug was introduced in one of my earlier commits: The shell does no
longer print the full extended address. Fixes the issue.
Fixes: #59125
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
As since commit bff6a5c, params.dst.ext_addr is no longer assigned with
the ctx->coord_ext_addr pointer, but a endianness swap is included, it
should be assigned with a proper buffer before the memcpy.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
For IEEE 802.15.4 compliance, the NET_L2_IEEE802154_ACK_REPLY option must
automatically be active if the radio driver does not AUTOACK and inactive
otherwise. No user interaction is required.
Future changes will deprecate this option and replace it by a standard
compliant automatic mechanism.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The IEEE 802.15.4 standard does not specify a "Sub-GHz" option.
Therefore this option will be deprecated in the foreseeable future.
Rationale: Selecting PHYs and frequency bands is abstracted by the
concept of channel pages (see IEEE 802.15.4-2020, 10.1.3).
Radio drivers may expose additional configuration options that
specify the low level frequency band, operating mode and other
PHY-specific parameters. Such parameters should be exposed on a driver
instance level, e.g. via devicetree or as runtime options of the driver.
PHY-specific attributes derived from driver settings (e.g. available
channels) can then be announced to L2 w/o the user having to be aware of
any implementation details of the specific PHY.
Future changes will introduce the necessary infrastructure to define
channel pages and other PHY-specific configuration options to
replace this option. New drivers should therefore not rely on this
option.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Variable declarations are moved to the beginning of the block in
which they are visible to ensure consistency with the remainder
of the code base.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The encryption-only security level has been removed from the
spec, see IEEE 802.15.4-2020, 9.4.2.2 Security Level field.
The standard provides the following explanation (ibid):
"This security level is deprecated and shall not be used in
implementation compliant with this standard. Devices that
receive frames with security level 4 shall discard them, as
described in 9.2.4. The counter mode encryption and cipher
block chaining message authentication code (CCM) used allows
trivial changes to the underlaying encrypted data unless
data authenticity is provided, thus using data confidentiality
only is not useful. In the case of TSCH mode, security level 4
allows higher security level frames to be downgraded to
security level 4 frames."
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
See IEEE 802.15.4-2020, 7.2.2.11 Source Addressing Mode field and
7.2.2.9 Destination Addressing Mode field, table 7-3: The
previously deprecated "Simple addressing mode" was removed
from the spec.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Currently the insertion of an authentication tag requires a memcpy() call
and breaks encapsulation.
This change removes the need for memcpy() and improves the encapsulation
by calculating and reserving the required headspace early on while
keeping insertion where it belongs in the outgoing security procedure.
This is also a preparation for improved standard compliance of the
outgoing security procedure which is scheduled for a later commit.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The naming of variables and arguments containing the authentication
tag length was inconsistent:
* Naming inconsistency between header "length" vs. authtag "size"
in the same API calls
* "Tag" rather than "Auth[orization ]Tag" in external API calls
which is too generic from a compliance and readability viewpoint.
This is in preparation to zero-copy authentication support.
Almost all call sites will be subject to required structural changes
later on so no relevant git blame noise/history loss will be introduced
by this naming change in the long run.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Over time, some non-standard concepts and extensions were introduced
into the stack (in KConfig, in drivers, in the internal API and into the
implementation) which makes introduction of additional standard-
compliant extensions like TSCH (and others) unnecessarily difficult.
To introduce extensions like TSCH it is required for the IEEE 802.15.4
stack to become more structurally aligned with the standard again which
will be the focus of some of the upcoming preparatory changes.
One way to check and prove standard compliance is to reference the
standard from within the source code. This change therefore introduces
inline references to the IEEE 802.15.4-2020 standard wherever possible.
Deviations from the standard are documented with TODO or deprecation
labels to be addressed in future changes.
In the future, new code introduced to the IEEE 802.15.4 stack should
be documented and reviewed for standard-compliance to avoid further
divergence. Most importantly:
* MAC/PHY configuration (via net mgmt, radio API, devicetree or
KConfig) should always be directly linked to well-defined MAC/PHY
PIB attributes if visible to the MAC API or the end user.
* Net management/shell/radio API commands should have a documented
reference to the corresponding MLME action from the standard.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The current implicit MAC payload length algorithm (based on
an otherwise irrelevant footer pointer) produces invalid
(non-standard) values for beacon and command frames.
This change produces standard-conforming MAC payload length
values and simplifies access to payload length.
It would have been possible to fix the current footer pointer
based approach but there are arguments in favor of the new
approach:
- The footer pointer is used nowhere in the current code
base and makes length calculations rather non-obvious.
- The new approach does not use more memory and is easier
to understand and use.
- This change is a first step to support of IEEE 802.15.4
information element (IE) support. At a later stage the
distinction between MAC payload length and frame payload
length will be introduced and become relevant to
distinguish between header and payload IEs. At that point
the current implicit length calculation algorithm will
break down anyways.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The current IEEE 802.15.4 stack would not accept beacons
unless hardware filtering was active.
This change fixes the bug.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The shell command calling the IEEE 802.15.4 scanning procedure
did not properly release its net management event callback.
This change fixes the memory leak.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Active and passive scanning requires the channel and PAN to
be set temporarily.
This change ensures that the temporary configuration will
be reverted even when the scan is aborted due to an error.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Beacon and command frames are consumed by the IEEE 802.15.4
stack internally and should therefore be released before
returning control to the generic net stack.
This change fixes the resource leak.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change splits the IEEE 802.15.4 test into two separate
test profiles, one with and one without sockets enabled to ensure
that both configurations work correctly.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The current IEEE 802.15.4 stack assumes that drivers will
not provide more than one fragment in incoming packages.
This change exposes and enforces the pre-existing assumption
made by the implementation.
So far this is not a limiting restriction as MPDUs with more
than 127 bytes are not supported yet. It will probably have to
be changed as soon as larger payloads (as allowed by PHYs
introduced more recently into the spec) might want to allocate
smaller fragments.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
When changing IEEE 802.15.4 security settings or setting security
to 'none' then the previous session must be cleaned up to avoid
resource leaks.
This change introduces proper clean-up of the security session.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This is needed for applications that rely on WPA supplicant being
in disconnected state before issue subsequent commands (e.g., issue scan
immediately after disconnect fails, until disconnect is completed).
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Add a trailing _ to the section iterable name. This is useful, for
example, to implement numeric sorting like this:
SORT(.z_device_LEVEL_?_)
SORT(.z_device_LEVEL_??_)
Without the trailing _ it would not be possible to use the ?? wildcard
without triggering into trigraphs issues, because linker-defs.h header
is included in C files as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Provide an extra struct net_if * iface parameter to
net_if_ipv*_maddr_join/leave functions, so that the corresponding
interface context, the mcast address belong to, can be locked for the
operation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LLDP start timer is executed when iface is up
at startup, then once more when iface up event
is received.
When iface is up before net_lldp_init call, then multiple
entries are added to the lldp_ifaces related to the
same iface.
That leads to continuous loop execution within
lldp_tx_timeout.
This commit checks if lldp tx_timer_start is set and
doesn't append new entry into the slist.
The tx_timer_start is set at startup and reset on
down event.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
'ps_wakeup_mode' is used to set the wake up interval
to either 'dtim or 'listen_interval'. By default the
sta wakes up every dtim interval.
With 'ps_wakeup_mode' set to 'listen_interval' sta
will wake up for every listen interval period configured.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
listen interval is the time periods the STAs may be in idle
without listening beacons.
By default STA wakes up for every DTIM period.
If listen interval based power save is used
STA uses configured listen interval period(default 10
beacon intervals) to wake up.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
As we are using a generic validation function for limits, due to data
type mismatch the check for TWT interval overflow and fails.
Fix the data type and accordingly the maximum value in the help.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
TFM is not the only provider for PSA API, which means
the PSA config shouldn't depend only on it.
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
OpenThread networks do not use ND or MLD as they have their own set of
protocols to cover this functionality. So far, the use of OpenThread
with Zephyr relied on disabling those protocols support statically with
Kconfig, which prevented OT interfaces from being used along with other
IPv6 interfaces.
With the new network interface flags, it's now possible to disable ND
and MLD on individual interfaces, therefore disable them for OT
specifically.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The arm-clang compiler/linker does not optimize away unused function
symbols and thus will error if symbols that are referenced are not
defined. To fix this add needed ifdef'ry.
Build various network samples that utilize ethernet but don't have
CONFIG_NET_PROMISCUOUS_MODE will get a link error for:
Error: L6218E: Undefined symbol
net_mgmt_NET_REQUEST_ETHERNET_SET_PROMISC_MODE
(referred from ethernet.o).
Fix by adding ifdef protection around promisc code.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
TWT flow id is of 3 bit value(maximum mnumber of flows
supported is 8). Flow id range limited to 0 to 7.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds dummy link layer for offloaded ifaces, allowing
ifaces to directly receive l2_enable calls
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
In order to take granular input use micro seconds as input for TWT
intervals, this helps us in providing inputs such as 65.28ms without the
need of using floating points.
This also expands the TWT wake interval range to 262.144ms, earlier as
we want to use uint8, limited to 256ms.
Also, remove the units from the variable names, this is unnecessary and
also avoids doing breaking changes.
Update release notes as this is a breaking change, both type and
variable names are changed.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
In the case of no ARP entry, the incoming packet is added to the ARP's
pending queue, while ARP is being resolved. Here a reference is taken
by the ARP layer to the packet to avoid it being freed, but the Ethernet
immediately puts down the reference and send the ARP packet to the
driver.
If the ARP request fails for some reason, L2 returns failure to net_if
which then puts down the reference and the packet will be freed as the
reference count is now zero.
But the packet is still in the ARP's pending queue and after timeout
ARP will put down the reference causing double free bus fault (double
free message is only seen if the CONFIG_NET_PKT_LOG_LEVEL_DBG is
enabled, so, a bit hard to debug.
Fix this by clearing the ARP entry and pending queue after taking a
reference and then free ARP packet, IP packets are either freed by ARP
pending queue drain or net_if layer.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
According to RFC3927, hosts with only IPv4 LL address should still be
able to send packets to destination w/o IPv4 LL address:
A host with an IPv4 Link-Local address may send to a destination
which does not have an IPv4 Link-Local address. If the host is not
multi-homed, the procedure is simple and unambiguous: Using ARP and
forwarding directly to on-link destinations is the default route
This behaviour however was not possible with Zephyr, which only allowed
to use IPv4 LL source address for IPv4 LL destinations.
Fix this, by introducing a final fallback (only if IPv4 autoconf is
enabled), to select IPv4 LL address as a source address if no other
address is available.
Additionally, modify the ARP routine a bit if IPv4 LL address is in use.
There's no really point to forward the packet to gateway if IPv4 LL
address is used, as such addresses are not routable. Instead, try to
find the peer in local network in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes dead code warning. At this point we have already checked for
broadcast and it is set to false.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The following fixes were applied:
- Multicast Rx packets stats were not recorded due not parsing the
ethernet header. The function that tried to parse the ethernet header
was parsing the ethernet packet beyond the ethernet header.
- Added a new stats for unknown protocol which gets updated when the
ethernet layer encounters an unknown ethernet packet type.
Fixes#53994
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
Add support for configuring power save timeout in Wi-Fi chipsets.
Changes to configure power save inactivity timer.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
A follow up to commit 1d7a077e11 - apparently the PPP interface should
not be brought entirely down internally, as this can break further
communication with the host. Because of that, reintroduce functionality
that used to be covered by net_if_carrier_down() (which basically
skips the L2 enable(false) call), but limited to PPP scope only.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Wi-Fi bands are regulated by a governing body depending on operating
country, add support for the user to provide a country of operation as a
hint to the Wi-Fi chipset.
Ideally if the chipset supports this is all handled internally, in that
case "get" is useful but for testing and other usecases add a "set" as
well, similar to "iw reg set" or "country_code=" configuration in
hostapd/wpa_supplicant in Linux world.
This add a new offload API operation "reg_domain" that can be used to
either get or set the regulatory information.
The validation is left to the underlying chipset, shell only does basic
validation, (XY/00).
This is just a regulatory hint to the chipset, there could be other
regulatory hints e.g., beacon that can override this configuration, so,
an additional option to force this setting despite other hints is also
given for testing purposes.
FYI, the standard database used is [1].
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/tree/db.txt
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
As we have to provide LL addresses in big endian to userspace to be
POSIX compliant and we also do not want to reserve extra space for
such addresses, bff6a5cce5 introduced
a change that swaps address bytes in place in the packet before
returning the packet with LL address pointers to userspace.
Unfortunately a regression sneaked into the code base while doing
so: The byte swapping was duplicated when using 6LoWPAN compression
and the byte swapping caused decryption to fail in some cases,
see #53630. This commit fixes the problem.
Fixes: #53630
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The L2 networking layer checks for return value from enable, but
Ethernet is not checking and always returns 0, so, relay the return
value from the Ethernet driver to networking stack.
This fixes the issue of interface start failing but interface still
being up.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Add a new callback list structure for state change information.
These APIs are meant to eventually replace the single callback API
provided by openthread_set_state_changed_cb().
This will allow multiple users to gain information about
OpenThread stage changes.
Note CONFIG_OPENTHREAD_MAX_STATECHANGE_HANDLERS
with OpenThread's otSetStateChangedCallback() API can also be
used to enable registration of multiple callbacks of this type but this
cannot be modified if a certified OpenThread binary is used in the
build.
Signed-off-by: Nick Ward <nick.ward@ftpsolutions.com.au>
Setting a detected packet family (ipv4 or ipv6) in net_context level
instead in lower layers for AF_PACKET/SOCK_RAW/IPPROTO_RAW type sockets
when sending data.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
The IPv4 autoconfiguration feature relies on the fact, that autoconf
ARP packets are always prepared by the ARP module. After recent ARP
refactoring though that could no longer be the case due to packet
queueing mechanism. This could lead to net pkt leaks in the autoconf
module.
Fix this by skipping the pending packet queue for autoconf packets.
Since for autoconf ARP requests there's no really a pending packet
to queue, it can be safely avoided. This results in the ARP request
being always sent for the autoconf case, preventing the packet leak.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Initializing an event callback with net_mgmt_init_event_callback() just
sets some of the callback fields but do not propagate those masks in the
core. If we want to use the callback, it is necessary to also call
net_mgmt_add_event_callback().
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The current association logic starts by changing the channel. The way it
is done is wrong because it dereferences req->channel which is simply
not initialized by the caller. But anyway, the command itself does not
support providing a channel so we must already be on the right one when
trying to associate. Hence, drop this channel change call.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
During an association, the peer we are trying to connect to will send us
an association response frame with the destination PAN ID set to the PAN
ID we try to join. If we do not update the hardware address filters
beforehands, it is likely that the hardware will just discard the
response and the association will fail.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
While the packet structures seem to always be reset when they are
allocated, it's apparently not the case of the data buffers. Indeed,
these are allocated differently and just attached to the packet
structure through a frag/buffer member.
Experience shows that we may get uninitialized buffers so let's set
all MAC parameter bits one by one, even the reserved ones.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The spec clearly states: "association requests shall set the AR bit".
Even though Zephyr can currently only implement RFD devices which are
not expected to support incoming association requests, because this MAC
command is actually processed until being voluntarily ignored, let's
ensure the expected "ar" value is right to avoid failing because of a
wrong reason.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When validating a MAC command, the "src" and "dst" fields may be set to:
- IEEE802154_ADDR_MODE_SHORT (0x2)
- IEEE802154_ADDR_MODE_EXTENDED (0x3)
- IEEE802154_ADDR_MODE_SHORT | IEEE802154_ADDR_MODE_EXTENDED (0x3)
Hence when the mode check happens, any times the mode is set to SHORT
the check will fail while in practice it was meant to be valid because
the check is:
if (src_mode == src || dst_mod == dst)
Use bitfields when relevant so that when checking capabilities we use
the bit offsets rather than the plain numbers.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When validating a MAC command, there is sometimes a misunderstanding of
what "src" and "dst" length mean.
There are actually two fields in the MHR:
- One giving the type of address, if it is short or extended, it is the
value provided by the macros IEEE802154_ADDR_MODE_{SHORT,EXTENDED} and
their respective decimal values are 2 and 3.
- One giving the size of the address field, this is
IEEE802154_{SHORT,EXT}_ADDR_LENGTH and their value is actually 2 and 8
(bytes).
The function validate_mac_command() provides inputs to
validate_mac_command_cfi_to_mhr() which expects the former information.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
IEEE802154 L2 may modify the LL address during interface operation (when
processing MAC command). So far the L2 workaround the LL address update
protection by clearing the NET_IF_UP flag temporarily, but due to recent
changes it no longer works. Update this workaround to verify
NET_IF_RUNNING flag instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After network interfaces state handling rework, it's no longer correct
to verify the connection status on `net_if_up()`, as this only changes
the administrative state of the interface. The interface won't be put in
operational UP state until it's connected.
This check prevented the interface from being brought up during system
boot.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Setting the protocol type for raw IP packets to be sent so that they
can be passed to Ethernet.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This reverts changes introduced in commit
dd535f611d, as they broke the gsm_ppp
driver integration with PPP L2. Apparently, a more thorough
refactoring is needed to use the new interface management scheme with
PPP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to avoid using multiple sources of truth for the platfom's
endianness, convert the in-tree code to use the (BIG|LITTLE)_ENDIAN
Kconfig variables exclusively, instead of the compiler's
__BYTE_ORDER__.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When security type is not given but instead MFP is given, MFP setting
will be considered as security type, this is because both are optional
and no way to distinguish them easily.
Make security type mandatory for MFP selection, this way we either
assume defaults for both security type and MFP or explicitly ask user
for both. Reword the help text to reflect this.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Align virtual L2 with interface state handling update. Introduce
net_virtual_enable() function, which gets called whenever a network
interface is brought up (operational). This, combined with already
existing net_virtual_disable() function, can be used to update the
carrier state on the virtual interface, based on the underlying
interface status.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align PPP drivers/L2 with interface state handling update. Use the
carrier on/off notification instead of bringing the interface up/down to
update the interface state.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align OpenThread L2 with interface state handling update. Use the
dormant flag to indicate whether an interface joined a Thread network.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align Bluetooth L2 with interface state handling update. Use the dormant
flag to indicate whether interface has a Bluetooth connection or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align Ethernet/Wi-Fi drivers/L2 with interface state handling update.
For drivers, that did not support carrier detection, no changes are
needed.
Driver that did support carrier detection, are updated to set the
carrier state to OFF by default, instead of setting the
NET_IF_NO_AUTO_START flag. This allows to postopne the actual
NET_EVENT_IF_UP notification until driver detects that carrier is ready.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The IEEE 802.15.4 L2 now sets the ll protocol in the packet to a
specific value. This corresponds to the respective solution in Linux and
is required to validate access to IEEE 802.15.4 specific attributes of
the packet.
Later change sets will rely on this value to ensure that IEEE 802.15.4
specific package content can only be accessed on IEEE 802.15.4 packages.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Most IEEE 802.15.4 drivers do not support promiscuous mode, some do.
There is a dedicated L2 flag to signal this capability to clients.
Unfortunately the IEEE 802.15.4 L2 stack does not announce this flag
even for drivers that correctly expose it in their HW capabilities.
Some clients (notably the OpenThread L2) even uses promiscuous mode
without checking whether the driver actually supports it.
This change lets the vanilla IEEE 802.15.4 L2 check the driver's
HW capabilities to announce promiscuous mode on its 'get_flags()'
interface if supported.
The OpenThread L2 uses a constant (potentially incorrect) response
to 'get_flags()'. Fixing the OpenThread L2 is out of scope of this
change. This change just introduces TODO messages to the OpenThread code
so that the OpenThread team may fix the issue (or delete the TODO if they
deem it irrelevant).
Fixes: #51263
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The bridge subsystem was written with a ETH_BRIDGE_INITIALIZER that
assumed it could initialize a k_mutex with a zero-filled initializer.
That never worked. Unlike semaphores, mutexes have always required a
runtime call to k_mutex_init(). What happened instead is that
k_mutex_un/lock() returned error codes, which were ignored by the code
here. So no locking was happening.
This was discovered while migrating to zync, where an attempt to
unlock an unlocked mutex is a panic condition (and where zero-filled
initializers are legal, but represent an unfair semaphore and not a
mutex, so deadlock correctly).
Signed-off-by: Andy Ross <andyross@google.com>
This fixes the output below by moving the closing bracket to "<Security
type (optional: valid only for secure SSIDs)>" after the enumeration of
security types "0:None, 1:PSK, 2:PSK-256, 3:SAE".
Fixes:
uart:~$ wifi
wifi - Wi-Fi commands
Subcommands:
connect :Connect to a Wi-Fi AP
"<SSID>"
<channel number (optional), 0 means all>
<PSK (optional: valid only for secure SSIDs)>
<Security type (optional: valid only for secure SSIDs)>
v----------------------^
0:None, 1:PSK, 2:PSK-256, 3:SAE
(...)
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Return to line after the first parameter to:
- have the second parameter in a single line (not splitted) and
- start every parameters from a brand new line (easier to read)
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
This fixes the output below by adding the missing closing bracket to
"<MFP (optional): 0:Disable, 1:Optional, 2:Required":
Fixes:
uart:~$ wifi
wifi - Wi-Fi commands
Subcommands:
connect :Connect to a Wi-Fi AP
"<SSID>"
<channel number (optional), 0 means all>
<PSK (optional: valid only for secure SSIDs)>
<Security type (optional: valid only for secure SSIDs)>
0:None, 1:PSK, 2:PSK-256, 3:SAE
<MFP (optional): 0:Disable, 1:Optional, 2:Required
^-------------------------------------------------^
(...)
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
This fixes the output below by returning to line after "Connect to a
Wi-Fi AP":
Fixes:
uart:~$ wifi
wifi - Wi-Fi commands
Subcommands:
connect :Connect to a Wi-Fi AP"<SSID>"
^------^
<channel number (optional), 0 means all>
(...)
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
The LLDN frame has been obsoleted in IEEE 802.15.4-2015f. This change
removes it from the code, introduces frame types from current spec
levels and updates the frame validation rules in accordance with the
spec.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Several attributes in the ieee802154_context struct may potentially be
accessed from different threads and/or ISR context. Only some of these
attributes were properly guarded against race conditions.
This may not have been to problematic in the past but as other changes
in this PR introduce additional attributes and mutate several attributes
in a single atomic transaction, leaving such changes unprotected seems
dangerous.
This change therefore introduces systematic locking of the
ieee802154_context structure.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
IEEE 802.15.4 short address support is incomplete in several places.
This change improves short address support without claiming to fix
it everywhere. Future iterations will have to continue where this change
leaves off.
The purpose of this change was to:
* use the short address returned by association responses,
* automatically bind IEEE 802.15.4 datagram sockets to the short
address if available,
* use the short address in outgoing packages where applicable,
* improve validation of association/disassociation frames,
* model association more closely to the spec by tying it to the
existence of a short address in the MAC PIB thereby removing
redundancy in the PIB (which makes race conditions less probable),
* keep both, the short and extended addresses, of the coordinator.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This changes fixes several bugs and inconsistencies in the IEEE 802.15.4
L2 implementation. These bugs were revealed while documenting intended
endianness of driver, IP, socket and L2 attributes (see previous
changes).
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This is a preparatory change that fixes one aspect of short address
handling before fixing endianness so that the endianness fix can be
applied consistently in this method.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The IEEE 802.15.4 L2 code stores representation of attributes like
PAN id, short address and extended address in different encodings:
* big endian for extended address and CPU byte order for everything
else whenever such attributes enter user space (except for IP/socket
link layer addresses which are always big endian - even in case of
short addresses - to maintain POSIX compatibility).
* little endian for everything that is close to the radio driver as
IEEE 802.15.4 frames are little endian encoded.
Endianness was almost nowhere documented which led to several bugs and
inconsistencies where assignments of different byte order were not
converted (or sometimes converted, sometimes not).
This change documents endianness wherever possible within the realm of
the IEEE 802.15.4 L2 code. Conversion bugs and inconsistencies that were
revealed by the improved documentation will be fixed in a separate
commit.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Instead of using "select" on certain EC configurations, which is
considered unsafe for various reasons, use a "depends on" and rely on
the user to set a proper configuration in the config file.
Update the respective project configurations to comply with the new
configuration scheme.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When switching from a secure network to open network, the previous
parameters are not reset which causes the open connection to fail.
Remove the unnecessary "static" storage and reset to zero for params.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
This fixes a bug with ARP and multiple outgoing packets with an IP
that needs to be resolved, causing the first packet to go out and
all others to be dropped after the timeout by having a FIFO of
pending packets instead of a single packet.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The IEEE 802.15.4 security implementation had several severe bugs:
* A regression introduced by 6ea225e34a
(net/ieee802154: Finally removing usage of ll_reserve in L2)
introduced a buffer leak (reading/ writing beyond the end of the frame
buffer) and led the security implementation to malfunction in all but
the simplest cases (i.e. encryption/authentication: none).
* Encryption vs. authentication modes were not properly implemented i.e.
encryption was always active even if not required by the chosen
encryption level.
* Nonce endianness was not correctly handled on decryption of packets
which led to authentication failures.
* The frame counter was not checked for overflows.
* The encryption output buffer limit (out_buf_max) was not correctly set.
* Setting an invalid key mode led to a NULL pointer deref.
* We use CCM rather than CCM* as crypto.h does not provide access to
CCM*. CCM does not support encryption-only operation, though. This
condition was not checked by the code.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change makes the packet socket and ieee802154 l2 drivers aware of
AF_PACKET sockets, see https://github.com/linux-wpan/wpan-tools/tree/master/examples
for examples which inspired this change.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Some IEEE 802.15.4 specification constants must be made available in
userspace as they will be needed to use IEEE 802.15.4 RAW/DGRAM sockets
which will be introduced in this changeset.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Zephyr IEEE 802.15.4 drivers and L2 stack use the same constant names
for different MTU definitions. The intent of this change is to introduce
a consistent MTU definition which can be used everywhere in zephyr to
avoid confusion, bugs and name conflict.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Newly introduced Coverity scan throws a warning about duplicate tag as
per MISRA coding standards, so, use a unique tag name in the existing
code for "shell".
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Networking statistics framework is used to define handler and the data
structure, Wi-Fi management layer implements the handler and also adds a
new offload API to get statistics from the Wi-Fi driver.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
A new net_mgmt command and event are added for interface status,
depending on the implementation the status can be returned when polled
or an unsolicited event can be send by driver whenever there is a change
in status.
This is planned to be implemented only by upcoming wpa_supplicant,
offload implementation is left for driver developers.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Add `OPENTHREAD_CONFIG_MESSAGE_BUFFER_SIZE` to Kconfig.
Also set the number of children to minumum possible for MTD builds
in order to save some resources (~512B of RAM).
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
ppp_send_pkt() function can be called with NULL fsm parameter (when
PPP_PROTOCOL_REJ packet was sent), howerver this was not taken into
consideration when ppp_context was retrieved. In result, this could lead
to NULL pointer dereference an crash.
Fix this, by moving the ppp_context extraction directly where it's
actually used (PPP_CODE_REJ packet type handling). In such case, fsm
point should not be NULL.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Wi-Fi protocol uses EAPoL ether type frames for authentication, so, add
support for that ether type so that they are not dropped.
Though we have NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE to allow
unknown frames to be passed up the stack, but this might cause
performance penalty.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
This change makes the files which are part of this changeset comply to
the project's coding style rules as defined in .clang-format.
This required addition of some forward declarations and additional
dependencies into header files as some of them depended on the order of
header inclusion which was changed due to alphabetical ordering of
includes.
Background: .clang-format states "SortIncludes:true" which will force
re-ording of include-statements which in turn might break the build if
header file inclusion is not order-independent.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
6LoWPAN fragmentation is not related to IEEE 802.15.4 proper but is just
part of its IPv6-specific L3-adaptation layer. To make this more obvious
we rename all resources related to 6LoWPAN fragmentation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change decouples the IEEE 802.15.4 (L2) layer from all IPv6 (L3)
concerns.
Applications may now choose to set CONFIG_NET_6LO=n and
CONFIG_NET_L2_IEEE802154=y at the same time.
Setting CONFIG_NET_6LO=n will build a vanilla IEEE 802.15.4-2006 specs
compliant L2 layer without any reference to 6LoWPAN or IPv6. This allows
application developers to design custom non-IP protocols on top of
IEEE 802.15.4-2006 and thereby makes the L2 layer much more re-usable.
Fixes#48585.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change contains some merely editorial changes to inline comments
plus updates references from the IEEE 802.15.4-2003 spec to
IEEE 802.15.4-2006 which corresponds to the implementation level of
the module.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Most existing TODO markers (as well as VSCode default settings) favor
TODO over ToDo - so let's make this a little bit more consistent in the
IEEE 802.15.4 module.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The L2 protocol type information is not carried to the upper layers.
This is problematic for packet sockets, as the address structure in
recvfrom() is supposed to provide this information.
Fix this by adding ll_proto_type field in the net_pkt structure.
Set the protocol type in the Ethernet L2 when packet is processed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Driver function was called with wrong parameter, which resulted
in filter being added instead of removed
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
irq_lock() returns an unsigned integer key.
Generated by spatch using semantic patch
scripts/coccinelle/irq_lock.cocci
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move the CAN bus network driver from drivers/can to drivers/net as it
implements a network driver, not a CAN controller driver.
Use a separate Kconfig for enabling the CAN bus network driver instead of
piggybacking on the SocketCAN Kconfig. This allows for other
(e.g. out-of-tree) SocketCAN transports.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move OpenThread's glue code along with the Kconfig files that configure
OpenThread stack itself into module directory.
Update the maintainers file to reflect this change.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure MAC software transmission security is enabled by default
for Thread 1.3 builds as well.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In case NET_MGMT_EVENT module was enabled but w/o NET_MGMT_EVENT_INFO,
the OpenThread integration layer failed to build as the "info" field in
the net mgmt callback structure is not available then.
Fix this by conditionally enabling code processing the event only if
NET_MGMT_EVENT_INFO is enabled. Otherwise, print a warning, as the event
is not really useful if no address information is provided.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig option to the Ethernet L2 which allows to forward frames
with unknown EtherType further into the stack. This can be useful for
packet sockets, where further frame processing is application dependent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Get actual keys from references when PSA crypto is enabled.
A more secure method should be implemented once 802.15.4 platforms
support other than clear text keys.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Thread network makes no use of Solicited-node multicast addresses,
thereby do no create them on the interface to save multicast address
entries for important ones.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is a risk of deadlock in case net_if APIs are used from within
net_mgmt handlers as both module APIs are protected with their own
mutexes.
The scenario observed with OpenThread happend when
NET_EVENT_IPV6_ADDR_ADD/NET_EVENT_IPV6_MADDR_ADD events were processed.
The net_mgmt mutex is locked when both, an event handler is being
processed (from a separate net_mgmt thread) and when an event is raised
(for example when a new address is added on an interface). In case a
net_mgmt handler tried to use some mutex-protected net_if API, we could
end up in a deadlock situation - the net_mgmt would wait for the net_if
mutex to release, while some other thread (in this case main during
initialization) could wait within some net_if function, pending on
net_mgmt mutex to be released to notify the event.
Fix this, by preventing net_if APIs from being used from within OT
net_mgmt handlers.
Additionally, simplify the net_mgmt handlers logic, by making use of
additional info provided with an event. Instead of blindy assuming that
recently added address was the last on the list (which might not always
be the case, if addresses are added/removed dynamically), read the
actual address being added from the net_mgmt_event_callback structure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Name OpenThread version selection option to `OPENTHREAD_STACK_VERSION`
to be able to superseed it somewhere else.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
CONFIG_NET_L2_PPP_MAX_TERMINATE_REQ_RETRANSMITS
was not having any impact and
CONFIG_NET_L2_PPP_MAX_CONFIGURE_REQ_RETRANSMITS
was used incorrectly instead for terminate().
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
Making sure struct bt_l2cap_chan has absolutely no members related
to dynamic channels.
That way we ensure that there is no overhead for a build where only
fixed channels are used.
It's not enough that the dynamic channel-related members are put behind
ifdefs - they should be completely moved out from the struct definition.
Furthermore, the public l2cap.h header file already has a struct
that's meant to be used for dynamic channels: struct bt_l2cap_le_chan!
However, currently dynamic channel support is a mess - it's a mix
between these two structs. The bt_l2cap_le_chan struct should really
be an extension of the bt_l2cap_chan struct, i.e. the former should
contain as a member the latter.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
NSEC_PER_SEC is an unsigned integer macro. Thus, -NSEC_PER_SEC will be
treated as unsigned integer as well which lead to calculation error on
64bits integer variables. Added the correct type casting into the formula
to fix the calculation error.
Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix#42800
Both pss->rate_ratio and port_ds->neighbor_rate_ratio are double type
but sync_receipt_time is uint64_t. If pss->rate_ratio is less than 1
or sync_receipt_time * port_ds->neighbor_rate_ratio is less than 1,
sync_receipt_time becomes 0 due to double to uint64_t cast.
Assign port_ds->neighbor_prop_delay to sync_receipt_time first to fix
this issue.
Signed-off-by: Lu Ding <lucasdinglu@gmail.com>
This commit moves openthread CMakeLists.txt from openthread submodule
to zephyr/modules/openthread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
correction field in sync follow up message must be converted from host
endianness to network endianness.
Signed-off-by: Lu Ding <lucasdinglu@gmail.com>
This file defines the crypto driver API, cipher is supposed to be just
one type of capability (other can be hash) of these drivers, just
change the file name to be consistent with it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
If OPENTHREAD_IP6_FRAGM is enabled the IPv6 fragments are handled in
OpenThread stack but also forwarder unconditionally to the Zephyr
uplayers. It causes additional packets processing and leads to errors
like unrecognized next header type or duplicate ping reply. What more
these errors generate additional traffic which jam channel and decrease
latency for packets required fragmentation.
This commit add filtering IPv6 fragments when data fragmentation and
reassembling is enabled in OpenThread.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Takes the modem state machine by calling lcp_close instead of lcp_down
Using this method the LCP layer sends a TERMINATE_REQ to the modem and the
network interface is only taken down when the LCP layer has properly
finished.
Moved the ppp_mgmt_raise_carrier_off_event and net_if_carrier_down
to lcp.c to avoid breaking the interface.
Tested on a real modem.
Fixes: zephyrproject-rtos#41627
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit adds OPENTHREAD_PLATFORM_CSL_UNCERToption to Kconfig.
This option will allow user to configure openthreads CSL clock
uncertianity during build time.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When support for custom MRU/MTU was added with
CONFIG_NET_L2_PPP_OPTION_MRU=y, code flow with
CONFIG_NET_L2_PPP_OPTION_MRU=n has been broken due to lack of valid
'ctx->lcp.my_options.mru' initialization and its use (with value 0) in
the implementation.
Initialize 'ctx->lcp.my_options.mru' unconditionally in lcp_init(), so
that PPP works fine with CONFIG_NET_L2_PPP_OPTION_MRU=n.
Fixes: 8a51a79d89 ("net: l2: ppp: possibility to have a custom
MRU/MTU")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit adds an option to store OpenThread settings in RAM for the
case where the flash driver is not available. This can be useful
for testing openthread on new platforms which are still under
development.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The comment before this change was misleading, as those functions
(and other ones used from the level of user space application) require
DSA interface (like lan{012}), not the master one (like eth0).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The address of DSA API functions' structure available for usage from
the level of user's application (like for example in
samples/net/dsa/src) is stored in dsa context, not per DSA interface
device.
The struct dsa_context is defined once for all DSA (i.e. not master)
interfaces.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
`struct ieee802154_mpdu` access generates warnings related to unaligned
access to packed structure member. The structure itself however does not
need to be packed, since it is not mapped directly into the frame
buffer, but rather contains pointers to the structures representing
corresponding header regions in the frame. Those structures are
correctly defined as packed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr/in6_addr structures with raw buffers in
net_arp_hdr struct, to prevent compiler warnings about unaligned
access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace the statically defined net_buf with the standard mechanism of
allocating the buffer from a pool. This introduces a minor memory
overhead, but has the benefit of ensuring that standard net_buf calls
will work correctly.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Define a custom IEEE802154 based L2. The user can then use those symbols
to implement their own 802.15.4 based L2, based on those symbols, w/o a
need to modify the Zephyr tree.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce a common config for all 802.15.4 based L2 implementations.
This way, any custom 15.4 L2 implementation will be able to
automatically enable use 15.4 driver, w/o a need to modify the actual
Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`net_eth_vlan_enable()` allowed to use illegal vlan tag values, fix this
by disallowing any tag value higher or equal to 0xfff (which is a limit
for the tag and a reserved value).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Reading a set MTU from the used net_if when starting LCP.
This enables also other custom MTU/MRU to be set for the link than
the default CONFIG_NET_PPP_MTU_MRU (set by a ppp driver during
initialization).
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
There was a problem with source address selection for ARP
retransmissions, when an ARP entry was already pending. In such case,
the `entry` value passed to `arp_prepare()` is NULL, which in result
caused the `current_ip` variable being used as the source value. The
problem with this approach is, that the `current_ip` is only set in
IPv4 autoconf, the Ethernet L2 does not set this variable. In result,
every retransmission of an ARP packet was sent with unspecified source
address, preventing the response from being handled.
Fix this by partially restoring the behaviour of the ARP source address
assignment from before IPv4 autoconf was introduced. If the ARP is sent
by the IPv4 autoconf, use the `current_ip` value provided. If entry is
not set, use the source IPv4 address set in the actual data packet.
Otherwise, search for a source address on the interface corresponding to
the `entry`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- Add a `log_strdup` to the role text output for logging V1
compatibility
- Fix style issues
- Change where the documentation refers to an OpenThread device as
"himself" to "itself"
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
If CONFIG_NET_LOG=y is set, OpenThread will output the current OT
role whenever the state changes.
To simplify understanding of the log output, this change replaces
the numerical role ID with the text name of the role. This also
required a change to a documentation file to replace an instance
of a numerical ID.
NOTE: This is potentially a breaking change should anyone be using
test scripts that monitor the OpenThread state changes and look
for the numerical ID. This does not seem to be the case for the
Zephyr tests, however.
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/net and drivers/ethernet/Kconfig.e1000 settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
The following settings has EXPERIMENTAL removed as they are considered
mature:
- NET_OFFLOAD
- NET_PROMISCUOUS_MODE
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/canbus, subsys/net/l2/canbus, and drivers/can settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
