Log API can be used before user can explicitly initialize the logger.
In order to ensure that logger core is ready to buffer log messages
it must be initialize as early as possible. Initialization does not
include initialization of default backend since driver may not be
ready and backend is needed only when log messages are processed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The current test expects particular order of cap_webusb and cap_msosv2
structures, create alternative structure for comparison.
Fixes: #8732
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove the CMakeLists.txt file that is in the 'common' directory of
nffs_fs_api. It has likely been added by mistake as it does not make
any sense as it is written.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
We are getting stack corruption on some platforms, so increase stack to
allow the test to run.
Fixes#8085
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tests failed on the target because flash area reserved
for fcb data storage was to small.
This path add dts overlay file for nrf52_pac10040 board which
increases this flash area to proper size.
Fixes#8038
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The introduction of `sanitycheck --list-tests` fails to properly parse
the subcases in tests/subsys/fs/nffs_api/ beacause four of them are
all packed with #ifdefs in a single src/main.c.
So this breaks that testcase in four:
- creating a common folder with the code itself
- moving the common code in */src/main.c to common/test_nffs.h and
adding ../common/*.c to the sources
- thinning each testcase.yaml to have only the needed testcase
definition
- adding zephyr_include_directories(../common) to the cmakefiles
so we now produce with --list-tests
- filesystem.nffs.basic.append
- filesystem.nffs.basic.corrupt_block
- filesystem.nffs.basic.corrupt_scratch
- filesystem.nffs.basic.fs_mount
- filesystem.nffs.basic.gc
- filesystem.nffs.basic.gc_on_oom
- filesystem.nffs.basic.incomplete_block
- filesystem.nffs.basic.large_write
- filesystem.nffs.basic.long_filename
- filesystem.nffs.basic.lost_found
- filesystem.nffs.basic.many_children
- filesystem.nffs.basic.mkdir
- filesystem.nffs.basic.open
- filesystem.nffs.basic.overwrite_many
- filesystem.nffs.basic.overwrite_one
- filesystem.nffs.basic.overwrite_three
- filesystem.nffs.basic.overwrite_two
- filesystem.nffs.basic.read
- filesystem.nffs.basic.readdir
- filesystem.nffs.basic.rename
- filesystem.nffs.basic.split_file
- filesystem.nffs.basic.unlink
- filesystem.nffs.basic.wear_level
- filesystem.nffs.cache.cache_large_file
- filesystem.nffs.cache.fs_mount
- filesystem.nffs.large.fs_mount
- filesystem.nffs.large.large_system
- filesystem.nffs.large.large_unlink
- filesystem.nffs.performance.fs_mount
- filesystem.nffs.performance.performance
30 total.
vs before, that we did:
- filesystem.nffs.basic.append
- filesystem.nffs.basic.corrupt_block
- filesystem.nffs.basic.corrupt_scratch
- filesystem.nffs.basic.fs_mount
- filesystem.nffs.basic.gc
- filesystem.nffs.basic.gc_on_oom
- filesystem.nffs.basic.incomplete_block
- filesystem.nffs.basic.large_write
- filesystem.nffs.basic.long_filename
- filesystem.nffs.basic.lost_found
- filesystem.nffs.basic.many_children
- filesystem.nffs.basic.mkdir
- filesystem.nffs.basic.open
- filesystem.nffs.basic.overwrite_many
- filesystem.nffs.basic.overwrite_one
- filesystem.nffs.basic.overwrite_three
- filesystem.nffs.basic.overwrite_two
- filesystem.nffs.basic.read
- filesystem.nffs.basic.readdir
- filesystem.nffs.basic.rename
- filesystem.nffs.basic.split_file
- filesystem.nffs.basic.unlink
- filesystem.nffs.basic.wear_level
- filesystem.nffs.cache.append
- filesystem.nffs.cache.corrupt_block
- filesystem.nffs.cache.corrupt_scratch
- filesystem.nffs.cache.fs_mount
...
- filesystem.nffs.cache.split_file
- filesystem.nffs.cache.unlink
- filesystem.nffs.cache.wear_level
- filesystem.nffs.large.append
- filesystem.nffs.large.corrupt_block
- filesystem.nffs.large.corrupt_scratch
...
- filesystem.nffs.large.split_file
- filesystem.nffs.large.unlink
- filesystem.nffs.large.wear_level
- filesystem.nffs.performance.append
- filesystem.nffs.performance.corrupt_block
...
- filesystem.nffs.performance.unlink
- filesystem.nffs.performance.wear_level
92 total.
(so it was repeating ALL the subcases for eatch main testcase)
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
New test for check whether deleted item is not copied to the newest
fcb sector during compression procedure.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Set FAT FS mount point name as per ELM FAT Library drive
name format.
Add file system specific headers wherever necessary.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Added test for initialization with FCB backend.
This test should goes over reset so it test blank and
subsequent initialization and data restoring capability
after the reset.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The NFFS partition at the end of flash is also useful for any other
file system or even the Flash Circular Buffer (FCB). Rename the
partition from 'nffs_partition' to 'storage_partition' and make it
depend on a new hidden Kconfig entry which the relevant users will
select (such as NFFS and FCB).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
API settings_subsys_init call was changed so that it returns
error (so returns int instead of void).
Prototype of storage helper function export_func for
settings_handler::h_export was changed so that it returns error
(so returns int instead of void).
Fixed few other error handling issues by ignoring return
values.
Tests were aligned to above patches.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Adapt the MyNewt non-volatile configuration system to become a settings
system in Zephyr.
The original code was modifed in the following ways:
* Renamed from config to settings
* Use the zephyr FCB, FS API, and base64 subsystems
* lltoa like function was added to sources as it was required but not
included in Zephyr itself.
* The original code was modified to use Zephyr's slist.h as single
linked list implementation.
* Reworked code which was using strtok_r, added function
for decoding a string to a s64_t value.
* Thank to the above the settings subsys doesn't require newlibc anymore.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a new test for testing multiple file systems mounted
simultaneously on Zephyr. The test enables FATFS and NFFS
togeather and uses RAM as backend storage device.
The intention of this test is to demonstrate multiple file systems
support and perform basic file and directory operations. This test
heavily reused the existing fat_fs_api and nffs_fs_api test sources.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adapt nffs_fs_api test as per the VFS layer changes.
Add new test for NFFS file system mount.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adapt fat_fs_api test as per the VFS layer changes.
Add new test for FatFs file system mount.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Test of f. flash_area_get_sectors was failing because parameter for
passing capacity of the sectors array was uninitialized.
This patch fix this bug.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
platform_whitelist does not deal with comma separated strings. Also
remove build_only option, this should also run on those devices.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prior to this commit, `flash_area_layout()` was being passed a pointer
to the incorrect type (`uint32_t *` where `int *` was expected). This
caused the following warning to be reported:
```
[...]/subsys/storage/flash_map/flash_map.c: In
function 'flash_area_get_sectors':
[...]/subsys/storage/flash_map/flash_map.c:191:32:
warning: passing argument 2 of 'flash_area_layout' from incompatible
pointer type [-Wincompatible-pointer-types]
return flash_area_layout(idx, cnt, ret, get_sectors_cb, &data);
^~~
[...]/subsys/storage/flash_map/flash_map.c:136:12:
note: expected 'int *' but argument is of type 'uint32_t * {aka long
unsigned int *}'
static int flash_area_layout(int idx, int *cnt, void *ret,
^~~~~~~~~~~~~~~~~
```
This commit changes the argument type to `u32_t` for both functions.
Signed-off-by: Christopher Collins <ccollins@apache.org>
It is faster to operate directly on flash_area pointer instead
of fetch it all the time using the fcb flash area id.
Also as f_area_id was needed only for get appropriate flash_area
pointer, so it is better to pass it only while initialization
the fcb and not store it in fcb instance data at all.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
fcb sectors description switch from using array of flash_area
structures to array of flash_sector structures.
This patch aligns tests to this change.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Removed CONFIG_FLASH_PAGE_LAYOUT because it is already selected
by NFFS kconfig itself. Some other keywords were duplicated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CONF_FILE was overwritten by boilerplate.cmake so not proper
settings were took for tests. NRF5 flash driver had changed
its name to one defined by DT (see #5773) - which causes
incompatibility witch previous settings.
This patch solves this problems.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce flas_map module is abstraction over flash memory and its
driver for using flash memories along with description of
available flash areas.
Module provides simple API for write/read/erase and so one.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Function flash_read was calling without checking return value.
(Coverity CID: 178794)
This patch cover this issue.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
When the header file is located in the same directory as the source
file it is better to use a relative quote-include, e.g.
than a system include like
Avoiding the use of system includes in these cases is beneficial
because;
* The source code will be easier to build because there will be fewer
system include paths.
* It is easier for a user to determine where a quote-include header
file is located than where a system include is located.
* You are less likely to encounter aliasing issues if the list of
system include paths is minimized.
Authors:
Anas Nashif
Sebastian Bøe
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds performance test for nffs with open, close, read, write and
unlink sub test cases.
Origin: Original
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch adds NFFS test suite ported from Mynewt. The test cases are
pretty much the same as in original implementation, however some of
them had to be adjusted to cover differences in Mynewt and Zephyr
filesystem APIs. Also the code was reformatted in some places to make
checkpatch happy.
All test cases from "basic" group can be also run on nRF52840 (nRF52 and
nRF51 do not have enough RAM to run all tests as-is).
Origin: Apache Mynewt NFFS
URL: https://github.com/apache/mynewt-nffs/tree/master
Commit: 6639f7a432e70db00ef25d5e558aedbe503a3c9a
Purpose: NFFS test suite
Maintained-by: Zephyr
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Added tests for the mcuboot interface module and the image
storage module.
Both tests are checking flash content produced by modules verified.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
