This is a test, and the function is called with K_FOREVER, so it's not
supposed to fail.
Fixes: #25735
CID: 210582
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Make sure that resolving IPv4 address but returning IPv6 address
(and vice versa) is failing and we catch that scenario.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If user supplies AF_UNSPEC, we need to do two queries, one for
IPv4 A record and one for IPv6 AAAA record.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some MPU systems require region power-of-two alignment
and can't automatically use remaining RAM for the newlib
heap. Set it for this case. Fixes this test on mps2_an385.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Run networking tests for native_posix, qemu_x86 and qemu_cortex_m3
platforms only as the tests are generic enough so no need to run
them in real physical device.
Fixes#9623#9614#9622#9621#9618
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In Zephyr this has no effect because getaddrinfo() returns a pointer
to a static array, but Coverity scan checks for this pattern.
Coverity-CID: 185273
Coverity-CID: 185279
Fixes#7085Fixes#7091
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>