The testsuite was always forcing minimal logging. This is problematic
as it does not allow user to see full logging string. Allow user to
override the minimal logging if needed, the default is still to
enable minimal logging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Only dump data when we are interested in the analysing coverage. By
default just collect the data.
CONFIG_COVERAGE_DUMP is used to control this behaviour.
This will help speed up sanitycheck and will avoid lots of noise in the
log when some tests with coverage enabled failed. Dumping data to
console is also suspected to be one of the reason why qemu hangs in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The log mechanism, even in immediate mode, adds somewhere
between 1K-2K of footprint to applications that use it.
We want to standardize the logging APIs for all logging
within the kernel, but need to not let platforms with
very constrained RAM/ROM in the dust.
This patch introduces CONFIG_LOG_MINIMAL, which is a very
thin wrapper to printk(). It supports the APIs expressed
in logging/log.h.
This will be the new default for test cases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_COVERAGE is also supported in some real targets now
as described in the doc
https://docs.zephyrproject.org/latest/guides/coverage.html
So let's remove that missleading sentence
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fatal error reporting now only dumps to the log mechanism,
so enable it in immediate mode for all tests to ensure
that fatal errors are visible and no messages are lost.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This has been subsumed by the new implementation in drivers/pcie.
We remove the legacy subsystem, related tests, shell module, and
outdated documentation/config references.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit enabled TEST_USERSPACE_WITHOUT_HW_STACK_PROTECTION
Kconfig option by default for ke1xf SoC Series, which instructs
the build to disable HW stack protection from tests that are to
run with User Mode enabled. This is done because this platform
does not have a sufficient number of MPU regions to support HW
stack protection (Stack Guards) and User Mode simultaneously.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces a new Kconfig option in the testsuite
sub-system, which allows us to disable HW stack protection from
tests that run with user mode enabled.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables the option to route the BusFault,
HardFault, and NMI exceptions in Secure state, when
building for Cortex-M CPUs with ARM_SECURE_FIRMWARE=y.
This allows the various test to utilize BusFault,
HardFault and NMI exceptions during testing.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
By selecting CONFIG_THREAD_NAME. It makes sense to have this enabled
by default for tests, to easy debugging in a case of crash.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Missing quotes are accepted in some places for compatibility with the C
tools, e.g.
source no/quotes/Kconfig
menu Title
It looks broken though. Fix the two places in Zephyr that skip the
quotes. A style warning will be added.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
for SDK 0.10.0, it consumes more stack size when coverage enabled
on qemu_x86 and mps2_an385 platform, adjust stack size for most of
the test cases, otherwise there will be stack overflow.
Fixes: #14500.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
