This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Define CONFIG_NET_CONFIG_IEEE802154_DEV_NAME value necessary to enable
atsamr21_xpro board on wpanusb sample.
The documentation was updated referencing the atsamr21_xpro board.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Converts all net samples that enable the mcr20a 802.15.4 driver to use
the frdm_cr20a shield instead of hardcoding configs for the frdm_k64f
base board. This makes it possible to build mcr20a samples for other
base boards with compatible arduino headers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Refactor wpanusb sample using new descriptor API, use endpoint index
instead of hardcoded endpoint address.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Patch 8af3df3519 changed logic and did not take into account 2 extra
bytes.
...
Precise data bus error
BFAR Address: 0x766e4900
***** Hardware exception *****
Current thread ID = 0x200004e8
Faulting instruction address = 0xddf4
Fatal fault in thread 0x200004e8! Aborting.
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This required wiring external daughter board by hand, it's not provided
by the board directly, let's remove this.
Applying the change on relevant samples.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
There were no shell commands implemented so remove the shell
support from this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
With the change to the configuration files, we can now compile
this sample for any platform that uses only the default prj.conf file:
nrf52840_pca10056
nrf52840_pca10059
usb_kw24d512
Update the sample.yaml file to remove the excludes.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename README to README.rst and add:
- Some nice formatting for existing content
- Requirements section (including handy links)
- Build and Running section (including multiple overlay options)
Signed-off-by: Michael Scott <mike@foundries.io>
Add support for NXP MCR20A 802.15.4 module as an overlay config file.
Use this file like so:
cmake -DBOARD=usb_kw24d512 \
-DOVERLAY_CONFIG=overlay-mcr20a.conf ..
Signed-off-by: Michael Scott <mike@foundries.io>
Add support for TI CC1200 802.15.4 module as an overlay config file.
Use this file like so:
cmake -DBOARD=quark_se_c1000_devboard \
-DOVERLAY_CONFIG=overlay-cc1200.conf ..
Signed-off-by: Michael Scott <mike@foundries.io>
