Changes the local netbuff name to be more generic and to be used later in code
initializing BR/EDR stack.
Change-Id: Iae177237c813a46cbd10720a7af3474632154678
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This makes sure NETWORKING_WITH_6LOWPAN and 6LOWPAN_COMPRESSION_IPHC are
selected properly and update IPSP sample to only include the minimal
config options so it can test if this is working properly.
Change-Id: I2565cbd4f79d91eaba348d43933aa893c6dc6ace
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch removes the default value from some platform/SoC specific
options which are declared in drivers/i2c/Kconfig because 1) most of
the time they are not valid values and 2) the correct values are
already set in the SoC Kconfig.
It also moves the interrupt priority definition from the driver's
Kconfig to the platform's Kconfig since it is a platform-specific
configuration.
Change-Id: If3c260b9a2fa095de47a99eb7fa5b947efefe9b1
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch removes the default value from some platform/SoC specific
options which are declared in drivers/spi/Kconfig because 1) most of
the time they are not valid values and 2) the correct values are
already set in the SoC Kconfig.
It also moves the interrupt priority definition from the driver's
Kconfig to the platform's Kconfig since it is a platform-specific
configuration.
Change-Id: Ic992749b3210ed8a2e454edece41ceca5edbaf2e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Python 2 isn't supported anymore and doesn't get fixes/updates.
For the long-term maintenance health of sanitycheck, convert to
use Python 3 interpreter, which mostly involved changes to how
strings are handled.
Change-Id: Ic42f5b2328001f04d876fd650986c4433968a76b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Corrected typos and added headings to API section to
enhance readability.
Change-Id: I5a43edfdd6a8ac7735d8f00823058f6a2661439f
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
This patch removes the default value from some platform/SoC specific
options which are declared in drivers/gpio/Kconfig because 1) most of
the time they are not valid values and 2) the correct values are
already set in the SoC Kconfig.
It also moves the interrupt priority definition from the driver's
Kconfig to the platform's Kconfig since it is a platform-specific
configuration.
Change-Id: Id00f7907fa55025011dabce6e282a9623be23831
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Corrected a few typos and misspellings. Corrected grammar to add clarity to the
section on task groups. Added cleaner headings to APIs to enhance readability.
Change-Id: I6ff4d447775db67dc7008aa30bd2bbb4ab6c32de
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Original copyright notice was lost when the file was copied
from Contiki.
Change-Id: I5e008b92cb3898255a7940dc2c61320014222610
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The file names and types were incorrectly described in comments
in net/ip/contiki/sicslowpan/ directory.
Change-Id: Id6aba238a08ec603a57f9a438dbf6fab202220f8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The path to the sample applications is a mis-match of previous and the
current values. Correcting it to represent the new value.
Change-Id: I54ffe823335b95f1076b1346d149b359b4f2e7bd
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Currently we have several sections that require the use of sudo for
functionality, but that is a workaround to the need for libusb to
control the FlySwatter hardware. This can be solved by adding in
proper udev rules.
Change-Id: I03f6464cb96a9924c902b897c36df925eb07d058
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This enables using echo_client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_client are actually tested with NETWORKING_WITH_BT.
Change-Id: I1ff83a9d0049e121dc7e406656e3282b16ee8c91
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ib8779a344a1a7ec02f10b0e23a533c78e68343b5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 'test_sleep' nanokernel project tests the following functionality:
1. Normal expiration of fiber_sleep()
2. Waking a sleeping fiber via fiber_fiber_wakeup()
3. Waking a sleeping fiber via isr_fiber_wakeup()
4. Waking a sleeping fiber via task_fiber_wakeup()
5. Normal expiration of task_sleep()
Change-Id: Ie51997ace9a4413f62d77daacd6dff97b6b3a4dd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following routines for waking a fiber that was previously
put to sleep using fiber_sleep().
isr_fiber_wakeup()
fiber_fiber_wakeup()
task_fiber_wakeup()
Change-Id: I7d78ee6997163d71b92f388a7b4c484f2e97862b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The fiber_start() family of routines now return a nanokernel
thread id (nano_thread_id_t). This is a pre-requisite step for
allowing fiber_sleep() operations to be cancelled.
Change-Id: I74a3885eda3252c158f4a48e90244569633469c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fix issue where a space is required after a comma:
-:245: ERROR:SPACING: space required after that ',' (ctx:VxB)
+ SECTION_PROLOGUE(_NOINIT_DMA_SECTION_NAME, (NOLOAD OPTIONAL),)
Now we will ignore such errors if the comma is followed by a ).
Change-Id: Ib38161cd11e650764c319ba373a1f7c1a6d80df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update to commit 6b10df4257367dd0ead49f88df473972c00a8b5c from the Linux
kernel, relevant changes since last update:
- checkpatch: fix a number of COMPLEX_MACRO false positives
- checkpatch: improve macros with flow control test
- checkpatch: warn when casting constants to c90 int or longer types
- checkpatch: improve the unnecessary initialisers tests
- checkpatch: improve tests for fixes:, long lines and stack dumps in commit log
Change-Id: Ic4f8d925cd7c076e18eb2f2841913be61239aac2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The info already exists elsewhere in the documentation / GSG.
Change-Id: I1176b496dfd28179ce7771af4d3ac659690c7a7e
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
CCC user data is already available on the initialization
(struct bt_gatt_ccc_cfg and ccc_cfg_changed callback).
Change-Id: Id06c69b6da33f651bc049983179cd6fe3bc197d6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes a bit of redundant code.
gatt_buf_reserve can call gatt_buf_add with data set to NULL, to
reserve space on gatt_buf.
Change-Id: I533a515bbd022a07ba8e2bfb3cd07e1a9ff8878b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Defined BT_UUID for the header can be used instead of struct member.
Change-Id: I55ca069d04622450e4fbb1e3f7abf6fdef2f8f30
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
It is more intuitive for the end user to enable IPSP by
selecting the BT network driver which then automatically
enables relevant Bluetooth options. The earlier way
required user to select L2CAP dynamic channel support
first before he could activate IPSP and this is not very
logical and user friendly.
Change-Id: Idde0da80a2a19670e217ae9a9a4717e8399559e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Base address registers and IRQs are set in Kconfig.
Set proper SPI default to various quark_se_ss based boards.
Change-Id: Iadaae551f441457bef334f94f68cafa7c3e499d0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though it's an ARC core, Quark SE SS does not follow the same registers
mapping as the official DesignWare document. Some parts are common, some
not.
Instead of bloating spi_dw.c with a lot of #ifdef or rewriting a whole
new driver though the logic is 99% the same, it's then better to:
- centralize common macros and definitions into spi_dw.h
- have a specific spi_dw_quark_se_ss_reg.h for register map, clock
gating and register helpers dedicated to Quark SE SS.
- have a spi_dw_regs.h for the common case, i.e. not Quark SE SS.
GPIO CS emulation and interrupt masking ends up then in spi_dw.h.
Clock gating is specific thus found in respective *_regs.h header.
Adding proper interrupt masks to quark_se_ss soc.h file as well.
One of the main difference is also the interrupt management: through one
line or multiple lines (one for each interrupt: rx, tx and error). On
Quark SE Sensor Sub-System it has been set to use multiple lines, thus
introducing relevant Kconfig options and managing those when configuring
the IRQs.
Quark SE SS SPI controller is also working on a lower level, i.e. it
requires a tiny bit more logic from the driver. Main example is the data
register which needs to be told what is happening from the driver.
Taking the opportunity to fix minor logic issues:
- ICR register should be cleared by reading, only on error in the ISR
handler, but it does not harm doing it anyway and because Quark SE SS
requires to clear up interrupt as soon as they have been handled,
introducing a clear_interrupts() function called at the and of the ISR
handler.
- TXFTLR should be set after each spi_transceive() since last pull_data
might set it to 0.
- Enable the clock (i.e. open the clock gate) at initialization.
- No need to mask interrupts at spi_configure() since these are already
masked at initialization and at the end of a transaction.
- Let's use BIT() macro when relevant.
Change-Id: I24344aaf8bff3390383a84436f516951c1a2d2a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Quark SE development board provides an ARC core and thus requires a
board definition so developpers can flash this core as well.
Change-Id: I3612e3b0c4d7085af4fcf3fa1f6233849a05c8b4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
While we don't have a proper heap that can make use of all the
available RAM, make it possible for applications using Newlib to
configure the size of the heap exposed via the sbrk() hook.
Change-Id: I4e3193c1f2df0ace1dbc5b1f6ceb2cdc61479762
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This patch adds the wiring information to spi_lsm9ds0 README so this
sample app can also be used in Quark D2000 CRB.
It also fixes the SDA pin from Quark SE Devboard since it was wrong.
Change-Id: I24d4df15186ef111f728a21f137246cf933a8222
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch fixes the QMSI SPI shim driver so we are able to use it in
Quark D2000 based platforms. The only change required to enable this
driver is an #if guard in spi_qmsi_init() because the macro QM_SPI_MST_1
and the function qm_spi_master_1_isr are not defined in QMSI headers
from Quark D2000.
Since this drivers is now properly working on Quark D2000, this patch
also sets the QMSI driver default options in arch/x86/soc/quark_d2000/
Kconfig.
Change-Id: Ic6e2f7f5a2c3f350ddf360b23ffab6b812948572
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This file is used by the git-review plugin to determine where to push
reviews and the branch to review against if different from master
Change-Id: I5b8109a8d2dfe8a1862c4209f0dfe667b2632557
Signed-off-by: Andrew Grimberg <agrimberg@linuxfoundation.org>
This patches removes 'CONFIG_WDT_DW=y' so we rely on the platform's
default option for the watchdog driver. This way the watchdog sample
application can be built for different platforms without changing
the configuration file.
Change-Id: I4fa0f8e1f34a4608d602b6a5120fa1818b94aa6a
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch removes the default value from some platform/SoC specific
options which are declared in drivers/watchdog/Kconfig because 1) most
of the time they are not valid values and 2) the correct values are
already set in the SoC Kconfig (e.g. arch/x86/soc/quark_d2000/Kconfig).
For Quark D2000, the IRQ priority options (WDT_DW_IRQ_PRI and WDT_QMSI_
IRQ_PRI) values are set to '0' since the priority information is ignored
by the interrupt registering system (the interrupt vectors are fixed in
this SoC).
Change-Id: I8f36c0f0e56211cdee3f2c6fc90c7dcac0a1b5aa
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch removes the default value from some platform/SoC specific
options which are declared in drivers/rtc/Kconfig because 1) most of
the time they are not valid values and 2) the correct values are
already set in the SoC Kconfig (e.g. arch/x86/soc/quark_d2000/Kconfig).
For Quark D2000, the RTC_IRQ_PRI default value is set to '0' since the
priority information is ignored by the interrupt registering system
(the interrupt vectors are fixed in this SoC).
Change-Id: I70de889cfd22e65f0e7acf7e57ddc6439f028394
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The name already set by the driver's Kconfig is correct, so overriding
it only causes confusion.
Change-Id: Ia6405786fdfdf103c922517c8140a07a9de387e0
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patches removes 'CONFIG_GPIO_DW=y' and 'CONFIG_GPIO_DW_0=y' so
we rely on the platform's default options for the gpio driver. This
way the gpio sample application can be built for different platforms
without changing the configuration file.
Change-Id: I2480fee5fcd5463c39470c668c4438d83ecb786f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Add definition for ssize_t that may be useful to represent sizes with
variables that also need to be able to have negative values (e.g. to
represent errors).
Change-Id: I52ec69591ccfd760021dad38f5ba1b1ebe707ea5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The current value for RTC alarm has been a bit annoying during RTC tests
since we have to wait 10 seconds to verify that the RTC driver is working
properly. So this patch changes the alarm timeout to 1 second.
Change-Id: I2ef2aaeb13a4f53c8ab294ffedc198e8f3ba92a7
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch extends the gpio sample application so it can be used to test
GPIO functionality in Quark D2000 CRB.
Change-Id: I69fed701708a7268e1e5386a9dfde68fe6bb8160
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch fixes the GPIO QMSI shim driver so we are able to use it in
Quark D2000 based platforms. To enable this driver we have to add a few
#if guards because some macros and functions (e.g. QM_AON_GPIO_0 and
qm_aon_gpio_isr_0) are not defined in QMSI headers from Quark D2000
(this SoC doesn't support the Always-On GPIO controller).
This patch also adds the QMSI driver default options to arch/x86/soc/
quark_d2000/Kconfig.
Change-Id: Ia16a345e1de3008f167ed66f891834607c05f4a2
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This handling is already done by QMSI, so no need for it to be done in
Zephyr side as well.
Change-Id: Ia5c6206d3d7f04702e0be0e76f2130df8d60b31c
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
