Avoid removing identity keys from the controller during the pairing
procedure. During the pairing procedure the keys will be cleared before
they are updated. This causes an unnecessary warning from HCI core where
it tries to remove an IRK key-set from the controller that has has not
been added yet.
While this is not an issue, the warning from HCI core is misleading and
might lead to unnecessary questions and investigations.
Warning appeared after: 6c6bd8c49e
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the pending ID keys add and delete flag out of keys storage area.
These flags are runtime flags and should not be stored in persistent
storage.
Due to struct alignment storage start has to be aligned so that
variables added before storage start does not affect the storage bytes
by introducing padding in the storage area
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Include build assert macros rework.
Update pip requirements by cbor package required by MCUBoot since
https://github.com/JuulLabs-OSS/mcuboot/pull/674 was merge.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Temporary point hal_nordic to the revision
59d33bc1dd59df14feb26f0010d527c1ea7a89e8
where the changes are present (before it's updgraded),
so the CI can proceed.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add a missing include of debug/stack.h in order to fix the
compilation warning on implicit declaration of log_stack_usage().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to de-duplicate 2 macros with the same use,
merge BUILD_ASSERT(), BUILD_ASSERT_MSG() into one macro.
Make BUILD_ASSERT_MSG() deprecated.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Fixed one case in which the conversion to the new DT_INST macro's got
missed in the ws2812_gpio driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enable the lptim1 timer on the Nucleo L432KC board. It can work with
both the LSI and the LSE as the board has a 32.768 kHz crystal.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Do not attempt to build on all boards. Instead, do a build-only pass
of the generic test case on all boards with EEPROM support.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert older DT_INST_ macro use in litex drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove the dts_fixup.h with a DTS app overlay file instead. We have
sensors that show up on both the I2C and SPI busses, and we disable
the sensors to match how the tests work currently.
The app.overlay utilizes the testing dts bindings to create test nodes
that should not conflict with any existing SoC nodes. Thus allowing the
test to run on any platform.
The dts overlay is structured such that i2c.dtsi and spi.dtsi are
generated with default values for required properties. We than update
device properties for those nodes that the defaults are sufficient for
one reason or another.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Do not declare VERBOSE as global, instead pass verbosity as argument.
Also get rid of options as global and fix coverage class to not use
global option variable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We do not use those arg files anymore, so remove them to avoid
confusion and for the sake of cleanup.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reorder classes to be on top of loose functions. Move a few globals into
the related classes where they are being used.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will make it easier for us to test classes and functions without
having arg options in the middle.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After a success image download, UpdateHub needs inform MCUboot that
must test new image and then, on success, commit this new image. This
add missing upgrade request call step and fixes the upgarde flow.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The current version aborts update when found last transfer block. Now,
system checks only at end of coap block transfer total size and install
if download is ok.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The MAX_PAYLOAD_SIZE must reflect the size of COAP_BLOCK_x. This is
necessary becase BLOCK size represents max payload size. The current
value create inconsistencies for coap lib. The same way,
MAX_DOWNLOAD_DATA must allocate sufficient space for MAX_PAYLOAD_SIZE
plus all space for coap header etc.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
