Use the generic option WDT_DISABLE_AT_BOOT instead of the SAM specific
one WDT_SAM_DISABLE_AT_BOOT (note the generic one has been introduced
after the SAM one).
This also have the consequence of changing the default value for yes to
no, fixing the watchdog tests.
Fixes#13290
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new net_pkt allocator. Fix a small leak in the test as well.
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The very first test was basically testing the checksum calculation. And
that's already tested in more relevant tests. It was also trying in a
cumbersome way to generate packets scattered over many net_buf. But
that's also already tested in various other tests, and it's not at all
part of core utils anyway.
In any case, that all redundant, so let's remove it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Use the new net_context option to enable timestamping of outgoing
packet (NET_CONTEXT_TIMESTAMP).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though core system is able to manage packet timestamping internaly (gptp
requires it for instance), it might be necessary to enable/disable
packet timestamping from net context directly.
Currently this will be only used by the tx timestamp test. So this
support is disabled by default. (And gptp does not require it anyway).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is required if traffic class is enabled, so allocated packets from
net_context do get the right priority set.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just a quick rm/mv. The new API is going to be the only one, so legacy
test can disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That can be useful on some tests which will not have any interface but
still allocate net_pkt. Also, one may allocate a packet with buffer not
knowing yet the interface it will be send through.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/0/K_NO_WAIT for all timeouts
And fix tcp context connect call (it's not net_context_listen obviously,
and one parameter was missing).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case of early crash, shell will not output logs. Added
documentation explaining how to handle such situations.
It is recommended to enable simple logger backend (RTT, UART)
which are available earlier.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
* Registration of interrupt context callbacks from user mode
is forbidden.
- Remove can_attach_isr() as a system call
- Enforce that can_send() has a NULL callback parameter
* k_msgq are kernel objects that do not live in user memory.
Fix the checks for it in can_attach_msgq().
* CAN API documentation was with the API struct typedefs and
not the actual APIs. Moved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The architecture document contained old information and is now
updated to match the reality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
drivers/pwm/Kconfig.esp32 is 'source'd within an 'if PWM' in
drivers/pwm/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Appears within a menu that already has 'depends on ARM_SECURE_FIRMWARE'.
'depends on FOO' on a menu will add 'depends on FOO' to each item within
it. 'if FOO' work similarly.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Appears within an 'if IMG_MANAGER'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
subsys/usb/Kconfig 'source's subsys/usb/class/Kconfig (which in turn
'source's subsys/usb/class/netusb/Kconfig) within an
'if USB_DEVICE_STACK', so the dependencies on USB_DEVICE_STACK added
within those files are redundant.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
subsys/bluetooth/common/Kconfig and subsys/bluetooth/host/Kconfig are
'source'd within 'if BT' and 'if BT_HCI', in subsys/bluetooth/Kconfig,
so there's no need to add those dependencies within them.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Appears within a menu that already has a 'depends on ARCH_POSIX'.
'depends on FOO' on a menu will add 'depends on FOO' to each item within
it. 'if FOO' work similarly.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Appears within an 'if BOARD_NRF52_BSIM' in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Appears within an 'if BOARD_NATIVE_POSIX' in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I2S_STM32 is already within an 'if I2S', in drivers/i2s/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I2C_EEPROM_SLAVE is already within an 'if I2C_SLAVE', in
drivers/i2c/slave/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if COUNTER' (in
drivers/counter/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if CLOCK_CONTROL' (in
drivers/clock_control/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if RTC' (in drivers/rtc/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These files are 'source'd within an 'if AUDIO_DMIC', in
drivers/audio/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols are already within an 'if MODEM_WNCM14A2A', so no need to
put 'depends on MODEM_WNCM14A2A' on them.
Also remove a redundant 'depends on MODEM' from MODEM_WNCM14A2A.
drivers/modem/Kconfig.wncm14a2a is already sourced within an 'if MODEM',
in drivers/modem/Kconfig.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Most of these are from 'source'ing drivers/sensor/grove/Kconfig within
an 'if SENSOR' (in drivers/sensor/Kconfig), and then adding another 'if
SENSOR' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
One of these is from 'source'ing a file within an 'if SERIAL', and then
adding another 'depends on SERIAL' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are from source'ing a file within an 'if FLASH', and then adding
another 'depends on FLASH' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. There are no "conditional includes" in Kconfig, so
'if FOO' has no special meaning around a 'source'. Conditional includes
wouldn't be possible, because an 'if' condition could include (directly
or indirectly) forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- The ARC CPU_HAS_MPU dependencies were added within the menu
menu "ARCH MPU Options"
depends on CPU_HAS_MPU
(arch/arc/core/mpu/Kconfig is source'd within it).
- The ARM CPU_HAS_MPU dependencies were redundantly added by
if CPU_HAS_MPU
source "arch/arm/core/cortex_m/mpu/Kconfig"
endif
and by some 'depends on CPU_HAS_MPU' within that file. Remove the
'depends on' and move the 'if' into the file instead.
Tip: Jump to symbols with '/' in the menuconfig and press '?' to check
their dependencies. If there are duplicated dependencies, the
'included via ...' path can be handy to discover where they are added.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The two redundant SPI dependencies are from 'source'ing a file within an
'if SPI' and then adding another 'depends on SPI' within it.
'if FOO' is just shorthand for adding depends on FOO to each item within
the 'if'. There are no "conditional includes" in Kconfig, so 'if FOO'
has no special meaning around a source. Conditional includes wouldn't be
possible, because an if condition could include (directly or indirectly)
forward references to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
subsys/net/lib/lwm2m/Kconfig.ipso is 'source'd within an 'if LWM2M', in
subsys/net/lib/lwm2m/Kconfig, so the 'depends on LWM2M' is redundant.
The 'depends on NET_IPV4' and 'depends on NET_L2_OPENTHREAD' are within
corresponding 'if's in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols appear within an 'if WIFI' (in drivers/wifi/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>