The net_if_ipv4_select_src_addr() should return global address
in the interface if nothing else is being found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we receive a multicast ICMPv4 packet, then send the reply back
with correct source address and not with multicast address.
Fixes#16257
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In all architectures, except x86, __start_swap_time is directly
updated by function read_timer_start_of_swap(), and it shall not
be registered via __temp_start_swap_time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When Zephyr crashes immediately QEMU reports an error immediately. This
is immediately reported by "make run". Then sanitycheck points the user
at the output of "make run". However the error message(s) are in QEMU's
output which is in a different .log file.
To address this situation point the error message at handler.log
instead of run.log if and only if handler.log is not empty.
To reproduce here's an artificial but very simple crash:
sanitycheck --extra-args=CONFIG_TEST_USERSPACE=n \
-p qemu_x86 -T tests/kernel/mem_protect/stackprot/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Move includes to outside of the extern "C" statements to fix C linkage
issue.
| /include/misc/util.h:53:1: error: template with C linkage
| template < class T, size_t N >
| ^~~~~~~~
Signed-off-by: Greg S. Woods <gwoods@lexmark.com>
Enable pull-up on UART TX pin to reduce power consumption.
If the board is powered by battery the SoC consumes more
power than expected.
The consumption increases because TX pin is floating
(High-Impedance state of pin B from Dual-Supply Bus Transceiver).
Similar to commit b5b728495b
("boards: reel_board: enable pull-up on UART RX pin")
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Previous version calculated rt_clock_base incorrectly by subtracting
clock_gettime from the specified time. Effectively the following
formula was used.
rt_clock_base := new_time - clock_gettime()
This is clearly incorrect when we consider what should happen if we
call clock_settime with the result of clock_gettime. It ought to be
approximately a no-op, but instead we end up zeroing the clock.
rt_clock_base := clock_gettime() - clock_gettime() = 0
This patch fixes clock_settime by instead using k_uptime_get to
calculate rt_clock_base, like so:
rt_clock_base := new_time - k_uptime_get()
Trying the earlier thought experiment we get:
rt_clock_base := clock_gettime() - k_uptime_get()
Using the definition of clock_gettime this expands to:
rt_clock_base := (rt_clock_base + k_uptime_get()) - k_uptime_get()
The two k_uptime_get() terms cancel out, leaving:
rt_clock_base := rt_clock_base
I.e. the no-op that we expect when calling clock_settime with
the result of clock_gettime.
Note: The bug is only observable when rt_clock_base is non-zero.
So when clock_settime is called for the first time, it will appear
to work correctly since rt_clock_base is initialized to 0.
Signed-off-by: Alexander Mihajlovic <alexander.mihajlovic@endian.se>
I2C support has been added back into the up_squared, leveraging the
new PCIe support in the DesignWare I2C driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The Apollo Lake devicetree is augmented with its 8 I2C interfaces.
The default number of dynamic IRQ stubs is increased to deal with
these new interfaces having IRQ vector detection at runtime.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The legacy PCI support in the DesignWare I2C driver is replaced with
the new PCIe support. The Intel Quark X1000 SoC and the galileo board
configurations are updated accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The 50-odd lines of boilerplate per I2C port is moved into a template
which is generated by CMake as needed at build-time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The SBL configuration no longer differs in any detail (except its name)
from the "standard" UpSquared configuration, so it is removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This needs to be pushed down to the SoC level, as it's an Apollo Lake
feature, not a feature of the UpSquared. Remove the Apollo Lake
references to the PCI devices because these will not be used when I2C
support is restored.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This option is no longer used in the dts_fixup.h file since there
are no SBL-specific fixups.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The second serial port (UART_1) can be used for connecting to
host serial port. This is used for example by PPP (Point-to-Point
Protocol) implementation in which case the pppd running in Linux host
connects to a pty that is linked to UART_1 in Zephyr.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
'west --version' output has the path to the west manifest directory.
If there is a semantic version string in this path name, it will
raise a false version check failure.
Signed-off-by: Thomas Stilwell <Thomas.Stilwell@nordicsemi.no>
The Particle.io Boron is an nRF52840-based board with a connected
u-blox SARA-R4 modem. The main board was previously upstreamed
without modem support.
Now that we have a driver to support the SARA-R4 modem, let's enable
it for the Boron board.
Signed-off-by: Michael Scott <mike@foundries.io>
SparkFun offers an Arduino-R3 compatible shield using the SARA-R410M-02B
LTE Cat M1/NB-IoT modem.
Now, that the basic SARA-R4 modem driver is implemented, let's enable
the shield for several MCUs supporting Arduino-R3 compatible headers.
Product Link:
https://www.sparkfun.com/products/14997
Signed-off-by: Michael Scott <mike@foundries.io>
The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat
M1 / NB1 ready:
- Configurable with a single hardware version
- Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS -
only/preferred
- Low power consumption and longer battery life
- Extended range in buildings, basements, and with NB1,
underground
This driver introduces support for basic AT commands to
query modem information as well as socket connection
for TCP/UDP communication.
Signed-off-by: Michael Scott <mike@foundries.io>
The SARA-R4 series modules from U-Blox are size-optimized LTE-M /
NB-IoT and EGPRS modules designed for low power consumption and
longer battery life.
The binding identifies the UART device, power GPIO and reset GPIO
lines.
Signed-off-by: Michael Scott <mike@foundries.io>
Instead of using the now removed overlay files, use the SHIELD=
command-line option for testing the WNC-M14A2A modem.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's change the specific WNC-M14A2A check into a more generic
MODEM check for enabling ethernet. Many of these pins are used
on the Arduino headers.
Signed-off-by: Michael Scott <mike@foundries.io>
The WNC-M14A2A shield configuration has HW specific settings in place.
We can remove those settings here.
Signed-off-by: Michael Scott <mike@foundries.io>
This shield uses a non-standard UART exposed via Arduino-R3
compatible header pins.
It has configurations for FRDM_K64F and nRF52840_PCA10056.
Signed-off-by: Michael Scott <mike@foundries.io>
Shields can often be very complex to setup in a generic way for several
boards to support. Let's allow shields to have their own .conf files
as well as specialized overlays per board (when needed).
Signed-off-by: Michael Scott <mike@foundries.io>
The label binding was missed during initial development of the
WNC-M14A2A modem. Let's add the binding so that during the
migration to a shield, we can update the DTS correctly.
Signed-off-by: Michael Scott <mike@foundries.io>
Assert is checking the array size of pinconfig. Not the actual
size of the structure.
Fixes issue reported by Github User @weinholtendian
Signed-off-by: Michael Scott <mike@foundries.io>
Caller will handle freeing packet if error is encountered.
Fixes issue reported by Github User @weinholtendian:
<err> net_pkt: *** ERROR *** pkt 0x20027e78 is freed already
by offload_sendto():1717 (context_sendto():1473).
Signed-off-by: Michael Scott <mike@foundries.io>
Allows snippets to be placed in different locations:
- The noinit, rwdata and rodata output sections
- Two different locations for placing custom output sections,
one location for RAM and another for all other sections.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The compiler generates errors of the form
error: "CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT" is not defined,
evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>