Store the IPv4 address into the local LCP options and set it
as the interface IP address once IPCP negotiation is complete.
Fix calling the correct function when an IPCP Configure Reject
is received carrying our local IP address.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Implement uart_pipe functionality for the modem so that it
integrates with the PPP implementation.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Create a driver for GSM modems that use a standard AT command set
and enable Zephyr's own PPP stack for IP traffic.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
As a part of a ticker extension interface, it is now possible to specify
a slot_window when starting a ticker. When setting the
ticks_slot_window to a non-zero value, it is requested that the node
timeout is re-located to a position within the window, where the node
does not collide with other nodes - aligning to the end of the window.
The solution takes into consideration if a node has already been
updated with drift correction (e.g. ADV randomization), subtracting this
from the window.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Flashing stm32wb SoCs is available since Zephyr SDK-0.11.0.
Enables it on nuclmeo_wb55rg and set it as default as it is
faster in flashing and support doesn't require additional
action (vs pyocd package support).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Zephyr-specific files in mcux break when the drivers subdirectory is
no longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Not needed. Bindings are never concatenated together.
Makes the https://github.com/zephyrproject-rtos/ci-tools/pull/123 check
clean, though it only looks at changed files in PRs.
Clean up the header too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit introduces the can-primary alias to identify
the primary CAN interface.
This alias is used for all samples and tests, so they don't
need to probe the right interface.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Define a minimal set of attributes that can be used to indicate the
allowed context for invoking specific Zephyr API and kernel functions,
and the effect of invoking them on thread and other behavior.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This term needs to be defined to support documenting the effect of
various API calls on scheduler selection of the running thread.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The pinmux_basic_api test relies on a hardware loopback, manual
shorting of two GPIO pins. The Zephyr test framework does not allow
currently to define such pins in a generic way. The pinmux_basic_api
test hard codes pin numbers specific to a few evaluation boards.
The test has a few more flaws and limitations:
- it verifies that pin configured to function A can be controlled by
GPIO driver. It doesn't verify that pin configured to function B can
be contorolled by a corresponding peripheral driver.
- the test relies on level sensitive interrupt support which is not
always available.
- the test will pass even if there are erros when pin is configured to
function B.
- the test allows to configure both test pins as an output therefore
shorting the outputs.
Considering the flaws and limited coverage of the test as well as
missing features of the Zephyr test framework this commit removes the
testcase. It is not currently possible to write a generic pinmux
testcase that supports multiple boards and can be used to assess the
quality of the driver. Instead, to ensure the driver code will not
degrade, we need to rely on implicit testing done by the board
initialization code located in boards/ folder.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Updated the lll_conn_flush interface to pass the connection
handle while the LLL connection context stored handle has
been invalidated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Commit c248cdf17e remove deep sleep states
from residency policy based on SoC loses context in deep sleep states to
avoid a "forever timeout" power-off the whole system. It's right if deep
sleep means power off whole system only.
One of deep sleep states is that most power domains are shut off, but
except a few that retain just enough logic to allow the CPU to resume
from the same point of execution where it went to sleep. This is well
documented and implementations also have same behavior.
For another deep sleep state, system off, sys_pm_ctrl_disable_state can
prevent system off unexpectedly from being entered on long timeout. And
sys_pm_force_power_state can help power off whole system.
This reverts commit c248cdf17e.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
The terminal configuration should not be reset on exit if
sanitycheck's output is being directed to something that mediates the
terminal control, such as a pager. Only do the reset if stdout is
interactive.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Files that need something from this directory should be using the
prefix, e.g. <drivers/sensor.h> instead of just <sensor.h>.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
