This commit is a followup to PR #25808 which updates the tests to
ensure the REQUIRED keyword is also used for the ZephyrUnitest package.
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add two testcases,one of them verify rbtree node can be embedded
in any user struct.
And another verify some operations in logarithmic time.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
IS_EMPTY macro allows to check if defined name is empty, i.e.
does not contain replacement list.
LIST_DROP_EMPTY macro may be used to process __VA_ARGS__ type lists,
e.g. a,b,,c , and remove empty elements.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The following commit:
commit 407b49b35c (refs/bisect/bad)
Author: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Date: Wed Feb 12 15:00:46 2020 +0100
cmake: use find_package to locate Zephyr
breaks as we don't find the ZephyrUnittest package. For now revert to
the old means until a proper fix can be made.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
These are short-circuiting utility helpers that can save typing
in situations where avoiding evaluation of the not-taken branch
skips invalid expressions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
We don't have to build an image for running test timeutil. We
can just build a native app to test it. So move it into "unit"
directory.
Also, add 64-bit support for unit testing framework.
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
The special 'unittest' target has largely been supersesed by
native_posix, and converting this to a regular test will allow
us to see code coverage for the CRC functions in our coverage
reports.
Fixes: #16943
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
move misc/math_extras.h to sys/math_extras.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The implementation of the <misc/math_extras.h> functions will use the
portable C code when PORTABLE_MISC_MATH_EXTRAS is defined before
including the header.
Use this feature macro to make sure that the unit test always tests the
portable functions in addition to the ones using builtins for the
current compiler.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Add a <misc/math_extras.h> header file with portable implementations of
a number of commonly used math and bit counting operations that are not
available in the C programming language.
The math_extras functions fall into two groups:
1. Unsigned integer arithmetic with overflow detection. Addition and
multiplication are provides for the u32_t, u64_t, and size_t types.
This commit doesn't include subtraction and division, and there are
no signed operations. These could be added later if there is a need.
2. Bit-counting operations like clz, ctz, and ffs. These are provided
for u32_t and u64_t only. I don't see a need for size_t operations,
but they could be added if needed.
A follow-on commit will add more efficient implementations using
compiler builtins for those compilers that support it.
Another commit will replace other uses of "naked" compiler builtins with
calls to these functions.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
lib/ was starting to get messy and inconsitent. Files being either
dumped in the root or in sub-directories without a clear plan.
Move all library components into one single folder and call it 'os'.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Used as a checksum on command messages when talking with MMC cards.
Implemented using the unwound bytewise implementation from
https://en.wikipedia.org/wiki/Computation_of_cyclic_redundancy_checks
which is a good mix of size and speed.
The API and naming matches lib/crc7.c in Linux.
Signed-off-by: Michael Hope <mlhx@google.com>
Running tests compiled for 64bit architecture were causing errors
in logger module. Updated unittest.cmake to build tests only
for 32bit architecture.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Adding a new kernel object type or driver subsystem requires changes
in various different places. This patch makes it easier to create
those devices by generating as much as possible in compile time.
No behavior change.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>