Adds documentation of file system APIs
Jira: ZEP-643
Change-Id: Ieac14a3dcf4913aeba6da2d3dc718eaa09b6cd88
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This reverts commit d73a9bb9c6.
The patch was intended for 1.6.0 release.
Change-Id: Id42058b746a3d2a54e4b1a2983eb58bd10b1ed40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mac OS X set up instructions were missing some important details that
prevent a new user to set up Zephyr development environment on a not
yet configured system.
JIRA: ZEP-616
Change-Id: I0890ec5364a0ce21e38ba4101d285fc8e46a6bd8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Remove generic PRINT macros from button samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Iae35d69a6a8473afdc1003ed629a21447a6f9a4a
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from aio samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: If50d8de2256f38902b5a4b68c57553cb5e8b8a94
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from pci samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I5a556637c441b1a4117eb75463d66f7127355a59
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from flash samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I2a9b69e9eb82bbdb03af563bdc49c7ed51681580
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from spi samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Ie377c7bba8b3cf2de05976cef5c4d814fa62b647
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from power samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I65a1caf2e3c2bd78f37d6443f180d674e9562af3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from hello world samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I15224913179cdb4832f8185c4dfa85623ada6109
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from synchronization samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I1f0a9d66db136c41c29a75b3e02e414b822f881c
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from usb samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Id90c657b05c3b3b9e326f3c1e08d8e8fb113714c
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from sensor samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I474efcd1daf8e621acd50d88b3a9662b8cd2b516
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from net samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I4bec179c99056cce41e1f3495c162f25c3cd2364
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Adds the ENC28J60 Ethernet module driver.
Origin: Original
JIRA: ZEP-291
Change-Id: I2b5790ecb251f9059f172bcaafadef24bd27207a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Fix several issues which are causing the BMI160 app hang.
For SPI duplex transfer, QMSI only supports equal length.
For SPI freq, divider is used. Actual freq is no longer used.
Jira: ZEP-461
Change-Id: I1a1bcc12c6514c3797686dfdad1ce1b852f7dc78
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
It's an important header, used in many place and it's thus very easy to
get different sub-system loading it thus leading to redefinition error.
(net_buf and net drivers for instance).
Change-Id: Icbbbc2fc0abcb007d8950dd06b601717960e7215
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
update /doc/getting_started/installation_linux.rst with
ncurses package for both Ubuntu and Fedora systems
Jira: zep-478
Change-Id: Icd4ba5c2151e96330005e3e31f5ea50b437e4f18
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added new section for file system. Added test and sample folders
for mbedTLS section.
Change-Id: Iccbd16d0f174e65a4b1f102f6ccf26cc927b2887
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Contributor documents are moved to the wiki.zephyrproject.org site
Three references in existing documents updated to point to the wiki.
Change-Id: Ib902b9596020722cf8fec2fc064725f7406297ff
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
One remaining reference to uart_qmsi_pm_save_config
was missed by patch bc60506d3e.
This reference is removed.
This fixes the following error:
...
drivers/built-in.o: In function `uart_qmsi_line_ctrl_set':
/drivers/serial/uart_qmsi.c:439:
undefined reference to `uart_qmsi_pm_save_config'
collect2: error: ld returned 1 exit status
...
Change-Id: I1ceda0e152db5a1c7f70d67c04b931416687031a
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Add testcase.ini file for qemu_x86.
We detected an unexpected behavior in sanitycheck before submitting
this patch:
In testcase.ini, if platform_whitelist contains more than one
platform only the last platform will work. So, here we just use
qemu_x86.
However, we believe this situation is caused by the structure of
this sample. See mylib/Makefile.
Jira: ZEP-621
Change-Id: I656c1b9a69b93fd9f7b0d98a69f49b9641918a93
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Current code tests treats "" (quotes included) as an empty value for that
varible (as coming from Kconfig). However, that file also used to
integrate with build systems for 3rd-party components, e.g. as examplified
by samples/static_lib, and in that case it will be just an empty string.
So, first strip surrounding quotes, then test for empty string.
samples/static_lib: Update for recent Makefile.toolchain.zephyr changes.
Makefile.toolchain.zephyr is 2-pass now, so needs to be included twice.
ARCH needs to be defined *before* including it. Otherwise, just used
CROSS_COMPILE and TOOLCHAIN_CFLAGS set by it.
Change-Id: I56e963d0d107c77390395682d60400cf6ca62337
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Implement saving and restoring context of the PWM controller when the
application goes to SYS_PM_DEEP_SLEEP. No action is taken for other
states at the moment.
This functionality is implemented in the shim driver first to enable
the feature, but will later be moved into QMSI.
Change-Id: I5784f6a2c63caaea5785ca5d92bb6cc3bc9fa4cc
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Removed dead code inside sensor_lsm6ds0.h. There is no kconfig option
CONFIG_LSM6DS0_I2C_ADDR_6A neither 6B.
Also the #define LSM6DS0_I2C_ADDR is not in use.
Change-Id: Ib5a7f40d0d61542ed81687227df3795ba52ec725
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
In order to restore uart context after entering
SYS_PM_DEEP_SLEEP, suspend and resume functions
are called.
The following parameters are restored:
- All registers for the UART device.
- UART clocks.
The FIFO control register cannot be read back and is
not stored in the device configuration.
The default parameters are applied for them.
The suspend/resume functionality is implemented in
the QMSI shim layer as a fast and temporary solution,
it will be removed and migrated to QMSI later.
Change-Id: I4be9246f6aa5a6e0d91df54c1c69574060136607
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
The K64F SoC initialization previously used macros and structs
custom-defined in Zephyr in order to access peripheral registers.
Refactored it to use CMSIS-style register accesses from the ksdk
instead.
Change-Id: I80975c62de07ec95cf830e99cd5b0abb9623acd0
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Linux package update/upgrade instuctions were incomplete (on
Ubuntu the instructions updated the local database but didn't
actually do the upgrade). On Fedora, the dnf update command was
deprecated in favor of dnf upgrade.
Change-Id: I83e126cf924d9c3720fcfb77b0d5abda943a6af5
Jira: ZEP-516
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The function is getting called with NULL bufs, so uip_len cannot be
called on them. The stack further down handles NULL buffers correctly.
Jira: ZEP-474
Change-Id: I85fb045ec76bea2a83c64d0f72eabba4e661f5f4
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Add helper function for printing sensor_value to char buffer.
Change-Id: I46329675d9a69376ea74c4f7dfcb270ca2078c72
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add TCP/IPv4 routines to this sample.
This MQTT sample code demonstrates how to implement an MQTT subscriber
application.
To build this sample, the Paho's MQTT Packet Library is required. See
the README file.
For network application development, see:
* samples/net/echo_server
* samples/net/echo_client
Change-Id: Ibeb175ee2c4594b8961c60f2a0d25296c238401c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Demonstrates the use of flash storage media for file system. This
uses the on-board SPI flash on Arduino 101 board.
Jira: ZEP-447
Change-Id: Ia571cff743f338d57922df68172e94c3f18a802d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Adds the flash device support for the file system storage media.
The implementation is generic for any flash device that implements
the flash API support.
Origin: original
Jira: ZEP-447
Change-Id: Ib89a6a64216cce1461da0bec6fa9588b97e06b41
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Demonstrates the Zephyr file system APIs. This currently
runs on FAT FS using RAM emulation of disk.
Origin: Original
Jira: ZEP-285 ZEP-228 ZEP-481 ZEP-446
Change-Id: If459b8c2f819a2a38c8c4d805ec3f689dfcdef17
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds the glue layer to interface the Fat FS module with Zephyr
file system API.
Origin: Original
Jira: ZEP-228 ZEP-483
Change-Id: I878fdad8ecaf46992d6163e24a9b0b633f49154f
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds the header files containing Zephyr File System API
descriptions and interfaces.
Origin: Original
Jira: ZEP-228 ZEP-480
Change-Id: I76a000187a133df7a82329af78aec9ea6511915c
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds the diskio interface for the FAT file system. This
revision uses RAM to emulate disk storage.
Origin: Original
Jira: ZEP-285
Change-Id: I7a30c8761d5ed9b564f1d1e08482c5ef199d7372
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
USB DFU sample application is now using new system log macros and
updated the .conf file.
JIRA: ZEP-311
Change-Id: Ifa5ede70c06a5fe18dde865fa7e97f469364ddb8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
- Add TCP/IPv4 routines to this sample.
- Add a testcase.ini file.
This NATS sample code demonstrates how to implement a NATS subscriber
application.
Change-Id: I25a7465b7163a09a0163859076a97b1e258a06f1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
- Add TCP/IPv4 routines to this sample.
- Add a testcase.ini file.
This NATS sample code demonstrates how to implement a NATS publisher
application.
Change-Id: Ifeac3bf03b7febafcee927b1d2ec256685885fd8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample code shows how to write a DNS client application.
Only client functionality is implemented in this sample.
The code is self-documented. Read the README file for more information
about the network setup.
See https://tools.ietf.org/html/rfc1035 for more information about the
DNS protocol.
Origin: Original
Jira: ZEP-500
Jira: ZEP-501
Change-Id: Ibcfa4e392143fdc2258971304d5296d70c1c9423
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Bluetooth tester is now using new system log macros.
JIRA: ZEP-311
Change-Id: I6398f2de12d5ba1073e40fd45aa8e0177d1e279d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Add TCP/IPv4 routines to this sample.
This MQTT sample code demonstrates how to implement an MQTT publisher
application.
For network application development, see:
* samples/net/echo_server
* samples/net/echo_client
Change-Id: I13ac5ca1da2cd4d984fb595b599c3eab4edc5bf0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>