Add IEEE 1003.1 Posix Style file system API support.
These API's will internally use corresponding Zephyr
File System API's.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Modify the linker script with the command INSERT.
It instructs the linker to augment the default linker script
SECTIONS with the ones provided with the one provided in
this script.
It also modified the meaning of the -T switch, so it no longer
replaces the default linker script
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patchset provides Xtensa's xcc compiler support for Xtensa
projects in Cmake. This requires the below environment variables
to be defined aptly. The appropriate xcc license information also
need to be supplied.
ZEPHYR_GCC_VARIANT=xcc
TOOLCHAIN_VER=RF-2015.3-linux
XTENSA_CORE=cavs21_LX6HiFi3_RF3_WB16
XTENSA_SYSTEM=/opt/xtensa/XtDevTools/install/tools/
RF-2015.3-linux/XtensaTools/config/
XTENSA_BUILD_PATHS=/opt/xtensa/XtDevTools/install/builds/
Change-Id: Ib3c10e8095439b0e32276ff37c00eca8420773ec
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that other work has eliminated the two cases where we had to do a
reschedule "but yield even if we are cooperative", we can squash both
down to a single _reschedule() function which does almost exactly what
legacy _Swap() did, but wrapped as a proper scheduler API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This file never existed.
'source' currently ignores missing files instead of throwing an error,
due to Zephyr's custom globbing logic.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Added a basic command line parameter parsing framework
Added the following options by now:
--stop-at=<time>: Auto-stop after <time> seconds
--seed=<seed> : random seed for entropy device
--testargs : any argument that follows is ignored in top level
and made available thru
native_get_test_cmd_line_args()
All command line parameters are still avaliable by calling
native_get_cmd_line_args(), but now you can also call
native_get_test_cmd_line_args() to get whatever was set after
--testargs
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some of APIs of POSIX implmentation layer has same name as
native_posix architecture. posix_cheats.h is used to handle this
duplication in API name. Adding a guard in posix_cheats.h based on
CONFIG_PTHREAD_API.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This patch provides POSIX sleep APIs for POSIX 1003.1 PSE52 standard.
sleep(n) is implemented using Zephyr k_sleep API.
uleep(n) is implemented using Zephyr k_sleep/k_busy_Wait API.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just some exclusions to coverage in code which cannot be
reached, or can only be reached in error conditions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added possibility to reconfigure CONFIG_SYS_CLOCK_TICKS_PER_SEC
for the native_posix board (before it could only be 100)
+
Fixed tickless idle support
+
Minor fixes in irq wrapping
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some code in the POSIX architecture is only meant to handle
safely errors which should never occur and therefore
are not covered.
=> We exclude them from the coverage reports.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some code in the POSIX SOC (inf_clock) will only be executed
if the program is terminated by receiving a SIGTERM in a particular
part. Therefore to avoid confusing developers with changing
coverage, let's exclude it from the coverage reports.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some code in the POSIX arch core will only be executed
in some very atypical cases depending on the host load.
To avoid confusing developers, let's exclude it from the
coverage reports.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added a new config variable with the recommended stack
size for threads which are only meant for the posix architecture
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Rename the nano_internal.h to kernel_internal.h and modify the
header file name accordingly wherever it is used.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
rename main_clean_up() to posix_exit() for consistency
with all other global functions of this architecture
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
With the native port we are able to generate coverage reports, add the
needed options to the compliler and add a kconfig option to enable this
on the supported architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A new arch (posix) which relies on pthreads to emulate the context
switching
A new soc for it (inf_clock) which emulates a CPU running at an
infinely high clock (so when the CPU is awaken it runs till completion
in 0 time)
A new board, which provides a trivial system tick timer and
irq generation.
Origin: Original
Fixes#1891
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
