michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: shields: rtkmipilcdb00000be: update shield doc

Browse source 
Correct doc formatting
Remove platform specific hardware configuration

Signed-off-by: The.Thanh Nguyen <the.nguyen.yf@outlook.com>
This commit is contained in:
The.Thanh Nguyen 2025-03-22 13:30:53 +07:00 • committed by Benjamin Cabé
commit fda588bf1a
1 changed files with 7 additions and 20 deletions
Download patch file Download diff file Expand all files Collapse all files

27
boards/shields/rtkmipilcdb00000be/doc/index.rst
View file

@ -14,19 +14,19 @@ This display uses a 26 pin connector header.
Pins Assignment of the Renesas RTKMIPILCDB00000BE MIPI Display Pins Assignment of the Renesas RTKMIPILCDB00000BE MIPI Display
============================================================== ==============================================================
+-----------------------+------------------------+ +----------------------+-------------------------+
| Connector Pin | Function | | Connector Pin | Function |
+=======================+========================+ +======================+=========================+
| 14 | Touch ctrl I2C SDA | | 14 | Touch ctrl I2C SDA |
+-----------------------+------------------------+ +----------------------+-------------------------+
| 15 | Display backlight enable| | 15 | Display backlight enable|
+-----------------------+------------------------+ +----------------------+-------------------------+
| 16 | Touch ctrl I2C SCL | | 16 | Touch ctrl I2C SCL |
+-----------------------+------------------------+ +----------------------+-------------------------+
| 17 | External interrupt | | 17 | External interrupt |
+-----------------------+------------------------+ +----------------------+-------------------------+
| 18 | Display reset | | 18 | Display reset |
+-----------------------+------------------------+ +----------------------+-------------------------+
Hardware Requirements: Hardware Requirements:
********************** **********************
@ -35,19 +35,6 @@ Supported Renesas RA boards: EK-RA8D1
- 1 x RA Board - 1 x RA Board
- 1 x Micro USB cable - 1 x Micro USB cable
Hardware Configuration:
***********************
The MIPI Graphics Expansion Port (J58) connects the EK-RA8D1 board to the MIPI Graphics Expansion Board
supplied as part of the kit.
Set the configuration switches (SW1) as below to avoid potential failures.
+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+
| SW1-1 PMOD1 | SW1-2 TRACE | SW1-3 CAMERA | SW1-4 ETHA | SW1-5 ETHB | SW1-6 GLCD | SW1-7 SDRAM | SW1-8 I3C |
+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+
| OFF | OFF | OFF | OFF | OFF | ON | ON | OFF |
+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+
Programming Programming
*********** ***********