michaelh/zephyr
1
0
Fork 0
Code Releases Activity

drivers: convert to using newly introduced integer sized types

Browse source 
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.

Jira: ZEP-2051

Change-Id: I08f51e2bfd475f6245771c1bd2df7ffc744c48c4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is contained in:
Kumar Gala 2017-04-21 10:03:20 -05:00
commit ccad5bf3e3
231 changed files with 3200 additions and 3200 deletions
Download patch file Download diff file Expand all files Collapse all files

42
drivers/gpio/gpio_pcal9535a.c
View file

@ -75,7 +75,7 @@ static inline int _has_i2c_master(struct device *dev)
*
* @return 0 if successful, failed otherwise.
*/
static int _read_port_regs(struct device *dev, uint8_t reg,
static int _read_port_regs(struct device *dev, u8_t reg,
union gpio_pcal9535a_port_data *buf)
{
const struct gpio_pcal9535a_config * const config =
@ -83,7 +83,7 @@ static int _read_port_regs(struct device *dev, uint8_t reg,
struct gpio_pcal9535a_drv_data * const drv_data =
(struct gpio_pcal9535a_drv_data * const)dev->driver_data;
struct device * const i2c_master = drv_data->i2c_master;
uint16_t i2c_addr = config->i2c_slave_addr;
u16_t i2c_addr = config->i2c_slave_addr;
int ret;
ret = i2c_burst_read(i2c_master, i2c_addr, reg, buf->byte, 2);
@ -111,7 +111,7 @@ error:
*
* @return 0 if successful, failed otherwise.
*/
static int _write_port_regs(struct device *dev, uint8_t reg,
static int _write_port_regs(struct device *dev, u8_t reg,
union gpio_pcal9535a_port_data *buf)
{
const struct gpio_pcal9535a_config * const config =
@ -119,7 +119,7 @@ static int _write_port_regs(struct device *dev, uint8_t reg,
struct gpio_pcal9535a_drv_data * const drv_data =
(struct gpio_pcal9535a_drv_data * const)dev->driver_data;
struct device * const i2c_master = drv_data->i2c_master;
uint16_t i2c_addr = config->i2c_slave_addr;
u16_t i2c_addr = config->i2c_slave_addr;
int ret;
SYS_LOG_DBG("PCAL9535A[0x%X]: Write: REG[0x%X] = 0x%X, REG[0x%X] = "
@ -146,13 +146,13 @@ static int _write_port_regs(struct device *dev, uint8_t reg,
* @return 0 if successful, failed otherwise
*/
static int _setup_pin_dir(struct device *dev, int access_op,
uint32_t pin, int flags)
u32_t pin, int flags)
{
struct gpio_pcal9535a_drv_data * const drv_data =
(struct gpio_pcal9535a_drv_data * const)dev->driver_data;
union gpio_pcal9535a_port_data *port = &drv_data->reg_cache.dir;
uint16_t bit_mask;
uint16_t new_value = 0;
u16_t bit_mask;
u16_t new_value = 0;
int ret;
switch (access_op) {
@ -198,13 +198,13 @@ done:
* @return 0 if successful, failed otherwise
*/
static int _setup_pin_pullupdown(struct device *dev, int access_op,
uint32_t pin, int flags)
u32_t pin, int flags)
{
struct gpio_pcal9535a_drv_data * const drv_data =
(struct gpio_pcal9535a_drv_data * const)dev->driver_data;
union gpio_pcal9535a_port_data *port;
uint16_t bit_mask;
uint16_t new_value = 0;
u16_t bit_mask;
u16_t new_value = 0;
int ret;
/* If disabling pull up/down, there is no need to set the selection
@ -291,13 +291,13 @@ done:
* @return 0 if successful, failed otherwise
*/
static int _setup_pin_polarity(struct device *dev, int access_op,
uint32_t pin, int flags)
u32_t pin, int flags)
{
struct gpio_pcal9535a_drv_data * const drv_data =
(struct gpio_pcal9535a_drv_data * const)dev->driver_data;
union gpio_pcal9535a_port_data *port = &drv_data->reg_cache.pol_inv;
uint16_t bit_mask;
uint16_t new_value = 0;
u16_t bit_mask;
u16_t new_value = 0;
int ret;
switch (access_op) {
@ -346,14 +346,14 @@ done:
* @return 0 if successful, failed otherwise
*/
static int gpio_pcal9535a_config(struct device *dev, int access_op,
uint32_t pin, int flags)
u32_t pin, int flags)
{
int ret;
#if (CONFIG_SYS_LOG_GPIO_PCAL9535A_LEVEL >= SYS_LOG_LEVEL_DEBUG)
const struct gpio_pcal9535a_config * const config =
dev->config->config_info;
uint16_t i2c_addr = config->i2c_slave_addr;
u16_t i2c_addr = config->i2c_slave_addr;
#endif
if (!_has_i2c_master(dev)) {
@ -396,13 +396,13 @@ done:
* @return 0 if successful, failed otherwise
*/
static int gpio_pcal9535a_write(struct device *dev, int access_op,
uint32_t pin, uint32_t value)
u32_t pin, u32_t value)
{
struct gpio_pcal9535a_drv_data * const drv_data =
(struct gpio_pcal9535a_drv_data * const)dev->driver_data;
union gpio_pcal9535a_port_data *port = &drv_data->reg_cache.output;
uint16_t bit_mask;
uint16_t new_value;
u16_t bit_mask;
u16_t new_value;
int ret;
if (!_has_i2c_master(dev)) {
@ -456,7 +456,7 @@ done:
* @return 0 if successful, failed otherwise
*/
static int gpio_pcal9535a_read(struct device *dev, int access_op,
uint32_t pin, uint32_t *value)
u32_t pin, u32_t *value)
{
union gpio_pcal9535a_port_data buf;
int ret;
@ -498,7 +498,7 @@ static int gpio_pcal9535a_manage_callback(struct device *dev,
}
static int gpio_pcal9535a_enable_callback(struct device *dev,
int access_op, uint32_t pin)
int access_op, u32_t pin)
{
ARG_UNUSED(dev);
ARG_UNUSED(access_op);
@ -508,7 +508,7 @@ static int gpio_pcal9535a_enable_callback(struct device *dev,
}
static int gpio_pcal9535a_disable_callback(struct device *dev,
int access_op, uint32_t pin)
int access_op, u32_t pin)
{
ARG_UNUSED(dev);
ARG_UNUSED(access_op);