michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: arm: nxp: Remove label property from devicetree

Browse source 
The label property isn't needed in devicetree so remove it.

Signed-off-by: Kumar Gala <galak@kernel.org>
This commit is contained in:
Kumar Gala 2022-08-03 12:26:20 -05:00 • committed by Carles Cufí
commit 96bca6d656
35 changed files with 0 additions and 61 deletions
Download patch file Download diff file Expand all files Collapse all files

1
boards/arm/faze/faze.dts
View file

@ -80,7 +80,6 @@
led_controller_0: lp5030@30 {
compatible = "ti,lp5030", "ti,lp503x";
reg = <0x30>;
label = "LP5030";
led0: led_0 {
label = "LED LP5030 0";

1
boards/arm/frdm_k22f/frdm_k22f.dts
View file

@ -132,7 +132,6 @@ arduino_i2c: &i2c0 {
fxos8700: fxos8700@1c {
compatible = "nxp,fxos8700";
reg = <0x1c>;
label = "FXOS8700";
int1-gpios = <&gpiod 0 GPIO_ACTIVE_LOW>;
int2-gpios = <&gpiod 1 GPIO_ACTIVE_LOW>;
};

1
boards/arm/frdm_k64f/frdm_k64f.dts
View file

@ -134,7 +134,6 @@ arduino_i2c: &i2c0 {
fxos8700: fxos8700@1d {
compatible = "nxp,fxos8700";
reg = <0x1d>;
label = "FXOS8700";
int1-gpios = <&gpioc 6 GPIO_ACTIVE_LOW>;
int2-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
};

2
boards/arm/frdm_k82f/frdm_k82f.dts
View file

@ -184,7 +184,6 @@
fxos8700: fxos8700@1c {
compatible = "nxp,fxos8700";
reg = <0x1c>;
label = "FXOS8700";
int1-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
};
};
@ -217,7 +216,6 @@
mx25u32: mx25u3235f@0 {
compatible = "jedec,spi-nor";
label = "MX25U3235F";
reg = <0>;
spi-max-frequency = <104000000>;
wp-gpios = <&gpioe 3 0>;

1
boards/arm/frdm_kl25z/frdm_kl25z.dts
View file

@ -105,7 +105,6 @@
mma8451q@1d {
compatible = "nxp,fxos8700","nxp,mma8451q";
reg = <0x1d>;
label = "MMA8451Q";
int1-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
int2-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
};

1
boards/arm/frdm_kw41z/frdm_kw41z.dts
View file

@ -123,7 +123,6 @@
fxos8700: fxos8700@1f {
compatible = "nxp,fxos8700";
reg = <0x1f>;
label = "FXOS8700";
int1-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>;
};
};

6
boards/arm/hexiwear_k64/hexiwear_k64.dts
View file

@ -62,7 +62,6 @@
en_bat_sens: enable-battery-sense {
compatible = "regulator-fixed-sync", "regulator-fixed";
label = "en_bat_sens";
regulator-name = "en_bat_sens";
enable-gpios = <&gpioc 14 GPIO_ACTIVE_LOW>;
regulator-boot-on;
@ -70,7 +69,6 @@
en_ldo: enable-ldo {
compatible = "regulator-fixed-sync", "regulator-fixed";
label = "en_ldo";
regulator-name = "en_ldo";
enable-gpios = <&gpioa 29 GPIO_ACTIVE_HIGH>;
regulator-boot-on;
@ -78,7 +76,6 @@
en_3v3b: enable-3v3b {
compatible = "regulator-fixed-sync", "regulator-fixed";
label = "en_3v3b";
regulator-name = "en_3v3b";
enable-gpios = <&gpiob 12 GPIO_ACTIVE_LOW>;
regulator-boot-on;
@ -119,7 +116,6 @@
status = "disabled";
compatible = "maxim,max30101";
reg = <0x57>;
label = "MAX30101";
};
};
@ -131,7 +127,6 @@
fxos8700: fxos8700@1e {
compatible = "nxp,fxos8700";
reg = <0x1e>;
label = "FXOS8700";
int1-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>;
int2-gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
};
@ -139,7 +134,6 @@
fxas21002@20 {
compatible = "nxp,fxas21002";
reg = <0x20>;
label = "FXAS21002";
int1-gpios = <&gpiod 1 GPIO_ACTIVE_LOW>;
int2-gpios = <&gpioc 18 GPIO_ACTIVE_LOW>;
};

1
boards/arm/lpcxpresso55s16/lpcxpresso55s16_common.dtsi
View file

@ -134,7 +134,6 @@
fxos8700: fxos8700@1e {
compatible = "nxp,fxos8700";
reg = <0x1e>;
label = "FXOS8700";
int1-gpios = <&gpio1 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
};

1
boards/arm/lpcxpresso55s28/lpcxpresso55s28_common.dtsi
View file

@ -105,7 +105,6 @@ arduino_i2c: &flexcomm4 {
mma8652fc@1d {
compatible = "nxp,fxos8700","nxp,mma8652fc";
reg = <0x1d>;
label = "MMA8652FC";
int1-gpios = <&gpio1 19 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
};

1
boards/arm/lpcxpresso55s69/lpcxpresso55s69.dtsi
View file

@ -158,7 +158,6 @@ arduino_i2c: &flexcomm4 {
mma8652fc@1d {
compatible = "nxp,fxos8700","nxp,mma8652fc";
reg = <0x1d>;
label = "MMA8652FC";
int1-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
};
};

2
boards/arm/lpcxpresso55s69/lpcxpresso55s69_cpu0.dts
View file

@ -178,7 +178,6 @@ zephyr_udc0: &usbhs {
i2s0: &flexcomm6 {
status = "okay";
compatible = "nxp,lpc-i2s";
label = "I2S_0";
#address-cells = <1>;
#size-cells = <0>;
dmas = <&dma0 16>;
@ -189,7 +188,6 @@ i2s0: &flexcomm6 {
i2s1: &flexcomm7 {
status = "okay";
compatible = "nxp,lpc-i2s";
label = "I2S_1";
#address-cells = <1>;
#size-cells = <0>;
dmas = <&dma0 19>;

1
boards/arm/mimxrt1010_evk/mimxrt1010_evk.dts
View file

@ -55,7 +55,6 @@ arduino_serial: &lpuart1 {};
at25sf128a: at25sf128a@0 {
compatible = "nxp,imx-flexspi-nor";
size = <134217728>;
label = "AT25SF128A";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

1
boards/arm/mimxrt1015_evk/mimxrt1015_evk.dts
View file

@ -82,7 +82,6 @@ arduino_serial: &lpuart4 {
at25sf128a: at25sf128a@0 {
compatible = "nxp,imx-flexspi-nor";
size = <134217728>;
label = "AT25SF128A";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

1
boards/arm/mimxrt1020_evk/mimxrt1020_evk.dts
View file

@ -94,7 +94,6 @@ arduino_serial: &lpuart2 {
is25wp064: is25wp064@0 {
compatible = "nxp,imx-flexspi-nor";
size = <67108864>;
label = "IS25WP064";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

1
boards/arm/mimxrt1024_evk/mimxrt1024_evk.dts
View file

@ -137,7 +137,6 @@
fxos8700: fxos8700@1f {
compatible = "nxp,fxos8700";
reg = <0x1f>;
label = "FXOS8700";
};
};

3
boards/arm/mimxrt1050_evk/mimxrt1050_evk.dts
View file

@ -122,7 +122,6 @@ arduino_serial: &lpuart3 {
s26ks512s0: s26ks512s@0 {
compatible = "nxp,imx-flexspi-hyperflash";
size = <DT_SIZE_M(64*8)>;
label = "S26KS512S";
reg = <0>;
spi-max-frequency = <166000000>;
word-addressable;
@ -198,7 +197,6 @@ arduino_serial: &lpuart3 {
fxos8700: fxos8700@1f {
compatible = "nxp,fxos8700";
reg = <0x1f>;
label = "FXOS8700";
/* Two zero ohm resistors (R263 and R264) isolate sensor
* interrupt gpios from the soc and are unpopulated by default.
@ -212,7 +210,6 @@ arduino_serial: &lpuart3 {
touch_controller: ft5336@38 {
compatible = "focaltech,ft5336";
reg = <0x38>;
label = "FT5336";
int-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};

1
boards/arm/mimxrt1050_evk/mimxrt1050_evk_qspi.dts
View file

@ -25,7 +25,6 @@
is25wp064: is25wp064@0 {
compatible = "nxp,imx-flexspi-nor";
size = <67108864>;
label = "IS25WP064";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

2
boards/arm/mimxrt1060_evk/mimxrt1060_evk.dts
View file

@ -112,7 +112,6 @@ arduino_serial: &lpuart3 {
is25wp064: is25wp064@0 {
compatible = "nxp,imx-flexspi-nor";
size = <67108864>;
label = "IS25WP064";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";
@ -180,7 +179,6 @@ arduino_serial: &lpuart3 {
touch_controller: ft5336@38 {
compatible = "focaltech,ft5336";
reg = <0x38>;
label = "FT5336";
int-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};

1
boards/arm/mimxrt1060_evk/mimxrt1060_evk_hyperflash.dts
View file

@ -29,7 +29,6 @@
s26ks512s0: s26ks512s@0 {
compatible = "nxp,imx-flexspi-hyperflash";
size = <DT_SIZE_M(64*8)>;
label = "S26KS512S";
reg = <0>;
spi-max-frequency = <166000000>;
word-addressable;

3
boards/arm/mimxrt1064_evk/mimxrt1064_evk.dts
View file

@ -157,7 +157,6 @@ arduino_i2c: &lpi2c1 {};
mt9m114: mt9m114@48 {
compatible = "aptina,mt9m114";
reg = <0x48>;
label = "MT9M114";
status = "okay";
port {
@ -170,7 +169,6 @@ arduino_i2c: &lpi2c1 {};
touch_controller: ft5336@38 {
compatible = "focaltech,ft5336";
reg = <0x38>;
label = "FT5336";
int-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@ -186,7 +184,6 @@ arduino_i2c: &lpi2c1 {};
is25wp064: is25wp064@0 {
compatible = "nxp,imx-flexspi-nor";
size = <67108864>;
label = "IS25WP064";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

1
boards/arm/mimxrt1160_evk/mimxrt1160_evk.dtsi
View file

@ -69,7 +69,6 @@
fxos8700: fxos8700@1f {
compatible = "nxp,fxos8700";
reg = <0x1f>;
label = "FXOS8700";
/* Two zero ohm resistors (R256 and R270) isolate sensor
* interrupt gpios from the soc and are unpopulated by default.

1
boards/arm/mimxrt1160_evk/mimxrt1160_evk_cm4.dts
View file

@ -54,7 +54,6 @@
is25wp128: is25wp128@0 {
compatible = "nxp,imx-flexspi-nor";
size = <134217728>;
label = "IS25WP128";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

1
boards/arm/mimxrt1160_evk/mimxrt1160_evk_cm7.dts
View file

@ -67,7 +67,6 @@
is25wp128: is25wp128@0 {
compatible = "nxp,imx-flexspi-nor";
size = <134217728>;
label = "IS25WP128";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

1
boards/arm/mimxrt1170_evk/mimxrt1170_evk.dtsi
View file

@ -47,7 +47,6 @@
fxos8700: fxos8700@1f {
compatible = "nxp,fxos8700";
reg = <0x1f>;
label = "FXOS8700";
/* Two zero ohm resistors (R256 and R270) isolate sensor
* interrupt gpios from the soc and are unpopulated by default.

1
boards/arm/mimxrt1170_evk/mimxrt1170_evk_cm4.dts
View file

@ -54,7 +54,6 @@
is25wp128: is25wp128@0 {
compatible = "nxp,imx-flexspi-nor";
size = <134217728>;
label = "IS25WP128";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

3
boards/arm/mimxrt1170_evk/mimxrt1170_evk_cm7.dts
View file

@ -39,7 +39,6 @@
en_mipi_display: enable-mipi-display {
compatible = "regulator-fixed-sync", "regulator-fixed";
label = "en_mipi_display";
regulator-name = "en_mipi_display";
enable-gpios = <&gpio11 16 GPIO_ACTIVE_HIGH>;
regulator-boot-on;
@ -76,7 +75,6 @@
status = "okay";
compatible = "raydium,rm68200";
reg = <0x0>;
label = "RM68200";
reset-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
data-lanes = <2>;
width = <720>;
@ -116,7 +114,6 @@
is25wp128: is25wp128@0 {
compatible = "nxp,imx-flexspi-nor";
size = <134217728>;
label = "IS25WP128";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

2
boards/arm/mimxrt595_evk/mimxrt595_evk_cm33.dts
View file

@ -121,7 +121,6 @@ arduino_i2c: &flexcomm4 {
fxos8700: fxos8700@1e {
compatible = "nxp,fxos8700";
reg = <0x1e>;
label = "FXOS8700";
int1-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
@ -233,7 +232,6 @@ arduino_serial: &flexcomm12 {
mx25um51345g: mx25um51345g@0 {
compatible = "nxp,imx-flexspi-mx25um51345g";
size = <DT_SIZE_M(64)>;
label = "MX25UM51345G";
reg = <0>;
spi-max-frequency = <200000000>;
status = "okay";

10
boards/arm/mimxrt685_evk/mimxrt685_evk_cm33.dts
View file

@ -169,7 +169,6 @@ arduino_i2c: &flexcomm2 {
fxos8700: fxos8700@1e {
compatible = "nxp,fxos8700";
reg = <0x1e>;
label = "FXOS8700";
int1-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
@ -197,7 +196,6 @@ arduino_spi: &flexcomm5 {
i2s0: &flexcomm1 {
status = "okay";
compatible = "nxp,lpc-i2s";
label = "I2S_0";
#address-cells = <1>;
#size-cells = <0>;
dmas = <&dma0 2>;
@ -210,7 +208,6 @@ i2s0: &flexcomm1 {
i2s1: &flexcomm3 {
status = "okay";
compatible = "nxp,lpc-i2s";
label = "I2S_1";
#address-cells = <1>;
#size-cells = <0>;
dmas = <&dma0 7>;
@ -223,7 +220,6 @@ i2s1: &flexcomm3 {
&pmic_i2c {
status = "okay";
compatible = "nxp,lpc-i2c";
label = "PMIC_I2C";
clock-frequency = <I2C_BITRATE_FAST>;
#address-cells = <1>;
#size-cells = <0>;
@ -231,11 +227,9 @@ i2s1: &flexcomm3 {
pinctrl-names = "default";
pca9420: pca9420@61 {
label = "PCA9420_PMIC";
reg = <0x61>;
pca9420_sw1: sw1_buck {
label = "SW1_BUCK_REG";
compatible = "regulator-pmic";
voltage-range = <PCA9420_SW1_VOLTAGE_RANGE>;
current-levels = <PCA9420_CURRENT_LIMIT_LEVELS>;
@ -253,7 +247,6 @@ i2s1: &flexcomm3 {
};
pca9420_sw2: sw2_buck {
label = "SW2_BUCK_REG";
compatible = "regulator-pmic";
voltage-range = <PCA9420_SW2_VOLTAGE_RANGE>;
num-voltages = <50>;
@ -271,7 +264,6 @@ i2s1: &flexcomm3 {
};
pca9420_ldo1: ldo1_reg {
label = "LDO1_REG";
compatible = "regulator-pmic";
voltage-range = <PCA9420_LDO1_VOLTAGE_RANGE>;
num-voltages = <9>;
@ -289,7 +281,6 @@ i2s1: &flexcomm3 {
};
pca9420_ldo2: ldo2_reg {
label = "LDO2_REG";
compatible = "regulator-pmic";
voltage-range = <PCA9420_LDO2_VOLTAGE_RANGE>;
num-voltages = <50>;
@ -316,7 +307,6 @@ i2s1: &flexcomm3 {
mx25um51345g: mx25um51345g@2 {
compatible = "nxp,imx-flexspi-mx25um51345g";
size = <DT_SIZE_M(64)>;
label = "MX25UM51345G";
reg = <2>;
spi-max-frequency = <200000000>;
status = "okay";

1
boards/arm/mm_feather/mm_feather.dts
View file

@ -59,7 +59,6 @@
is25wp064: is25wp064@0 {
compatible = "nxp,imx-flexspi-nor";
size = <67108864>;
label = "IS25WP064";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

2
boards/arm/mm_swiftio/mm_swiftio.dts
View file

@ -59,7 +59,6 @@
is25wp064: is25wp064@0 {
compatible = "nxp,imx-flexspi-nor";
size = <67108864>;
label = "IS25WP064";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";
@ -109,7 +108,6 @@
ov7725: ov7725@21 {
compatible = "ovti,ov7725";
reg = <0x21>;
label = "OV7725";
status = "okay";
reset-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;

1
boards/arm/teensy4/teensy40.dts
View file

@ -40,7 +40,6 @@
w25q16jvuxim: w25q16jvuxim@0 {
compatible = "winbond,w25q16jvuxim", "jedec,spi-nor";
size = <16777208>;
label = "W25Q16JVUXIM";
reg = <0>;
spi-max-frequency = <133000000>;
status = "okay";

1
boards/arm/teensy4/teensy41.dts
View file

@ -13,7 +13,6 @@
w25q64jvxgim: w25q64jvxgim@0 {
compatible = "winbond,w25q64jvxgim", "jedec,spi-nor";
size = < 8388607 >;
label = "W25Q64JVXGIM";
reg = < 0 >;
spi-max-frequency = < 133000000 >;
status = "okay";

1
boards/arm/twr_ke18f/twr_ke18f.dts
View file

@ -250,7 +250,6 @@
fxos8700: fxos8700@1d {
compatible = "nxp,fxos8700";
reg = <0x1d>;
label = "FXOS8700";
reset-gpios = <&gpioc 15 GPIO_ACTIVE_HIGH>;
};
};

1
boards/arm/twr_kv58f220m/twr_kv58f220m.dts
View file

@ -139,7 +139,6 @@
fxos8700: fxos8700@1c {
compatible = "nxp,fxos8700";
reg = <0x1c>;
label = "FXOS8700";
int1-gpios = <&gpioc 18 GPIO_ACTIVE_LOW>;
int2-gpios = <&gpioc 19 GPIO_ACTIVE_LOW>;
};

2
boards/arm/warp7_m4/warp7_m4.dts
View file

@ -77,14 +77,12 @@
fxos8700: fxos8700@1e {
compatible = "nxp,fxos8700";
reg = <0x1e>;
label = "FXOS8700";
int1-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
};
fxas21002@20 {
compatible = "nxp,fxas21002";
reg = <0x20>;
label = "FXAS21002";
int1-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
};