michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: arm: stm32: Remove label property from devicetree

Browse source 
The label property isn't needed in devicetree so remove it.

Signed-off-by: Kumar Gala <galak@kernel.org>
This commit is contained in:
Kumar Gala 2022-08-03 12:27:36 -05:00 • committed by Carles Cufí
commit 4764a32d44
28 changed files with 0 additions and 70 deletions
Download patch file Download diff file Expand all files Collapse all files

6
boards/arm/96b_argonkey/96b_argonkey.dts
View file

@ -99,7 +99,6 @@
reg = <1>;
spi-max-frequency = <1000000>;
irq-gpios = <&gpiob 1 GPIO_ACTIVE_HIGH>;
label = "LSM6DSL_SPI";
};
};
@ -115,7 +114,6 @@
mp34dt05@0 {
compatible = "st,mpxxdtyy";
reg = <0>;
label = "MP34DT05";
};
};
@ -135,20 +133,17 @@
hts221@5f {
compatible = "st,hts221";
reg = <0x5f>;
label = "HTS221";
drdy-gpios = <&gpioa 2 GPIO_ACTIVE_HIGH>;
};
lps22hb-press@5d {
compatible = "st,lps22hb-press";
reg = <0x5d>;
label = "LPS22HB";
};
vl53l0x@29 {
compatible = "st,vl53l0x";
reg = <0x29>;
label = "VL53L0X";
};
};
@ -161,7 +156,6 @@
lp3943@60 {
compatible = "ti,lp3943";
reg = <0x60>;
label = "LP3943";
};
};

1
boards/arm/96b_carbon/96b_carbon.dts
View file

@ -124,7 +124,6 @@
reset-gpios = <&gpiob 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
irq-gpios = <&gpiob 1 GPIO_ACTIVE_HIGH>;
spi-max-frequency = <2000000>;
label = "BT_HCI";
};
};

1
boards/arm/96b_neonkey/96b_neonkey.dts
View file

@ -106,7 +106,6 @@
lp3943@60 {
compatible = "ti,lp3943";
reg = <0x60>;
label = "LP3943";
};
};

3
boards/arm/96b_stm32_sensor_mez/96b_stm32_sensor_mez.dts
View file

@ -79,7 +79,6 @@
mp34dt01@0 {
compatible = "st,mpxxdtyy";
reg = <0>;
label = "MP34DT01";
};
};
@ -93,14 +92,12 @@
lis3mdl-magn@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
label = "LIS3MDL";
};
/* ST Microelectronics LPS22HB pressure sensor */
lps22hb-press@5d {
compatible = "st,lps22hb-press";
reg = <0x5d>;
label = "LPS22HB";
};
};

3
boards/arm/96b_wistrio/96b_wistrio.dts
View file

@ -48,7 +48,6 @@
/* regulator controlling SX oscillator enable */
sx-osc-enable {
compatible = "regulator-fixed-sync", "regulator-fixed";
label = "sx-osc-enable";
regulator-name = "sx-osc-enable";
enable-gpios = <&gpioh 1 GPIO_ACTIVE_HIGH>;
regulator-boot-on;
@ -96,7 +95,6 @@
lis3dh@32 {
compatible = "st,lis3dh";
reg = <0x32>;
label = "LIS3DH";
};
};
@ -109,7 +107,6 @@
lora: lora@0 {
compatible = "semtech,sx1276";
reg = <0>;
label = "sx1276";
reset-gpios = <&gpiob 13 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
dio-gpios = <&gpioa 11 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,
<&gpiob 1 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,

1
boards/arm/adafruit_feather_stm32f405/adafruit_feather_stm32f405.dts
View file

@ -81,7 +81,6 @@
cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
gd25q16: gd25q16c@0 {
compatible = "jedec,spi-nor";
label = "GD25Q16C";
reg = <0>;
spi-max-frequency = <80000000>;
size = <0x200000>;

1
boards/arm/b_l072z_lrwan1/b_l072z_lrwan1.dts
View file

@ -122,7 +122,6 @@ arduino_i2c: &i2c1 {};
lora: lora@0 {
compatible = "semtech,sx1276";
reg = <0>;
label = "sx1276";
reset-gpios = <&gpioc 0 GPIO_ACTIVE_LOW>;
dio-gpios = <&gpiob 4 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,
<&gpiob 1 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,

7
boards/arm/b_l4s5i_iot01a/b_l4s5i_iot01a.dts
View file

@ -97,32 +97,27 @@
lis3mdl-magn@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
label = "LIS3MDL";
};
hts221@5f {
compatible = "st,hts221";
reg = <0x5f>;
label = "HTS221";
};
lps22hb-press@5d {
compatible = "st,lps22hb-press";
reg = <0x5d>;
label = "LPS22HB";
};
lsm6dsl@6a {
compatible = "st,lsm6dsl";
reg = <0x6a>;
irq-gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
label = "LSM6DSL";
};
vl53l0x@29 {
compatible = "st,vl53l0x";
reg = <0x29>;
label = "VL53L0X";
xshut-gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
};
};
@ -148,7 +143,6 @@
reset-gpios = <&gpioa 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
irq-gpios = <&gpioe 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
spi-max-frequency = <2000000>;
label = "SPBTLE-RF";
};
wifi0: ism43362@1 {
@ -159,7 +153,6 @@
boot0-gpios = <&gpiob 12 GPIO_ACTIVE_HIGH>;
wakeup-gpios = <&gpiob 13 GPIO_ACTIVE_HIGH>;
data-gpios = <&gpioe 1 GPIO_ACTIVE_HIGH>;
label = "ESWIFI0";
};
};

2
boards/arm/b_u585i_iot02a/b_u585i_iot02a-common.dtsi
View file

@ -126,7 +126,6 @@
mx25lm51245: ospi-nor-flash@0 {
compatible = "st,stm32-ospi-nor";
label = "MX25LM51245";
reg = <0>;
ospi-max-frequency = <DT_FREQ_M(50)>;
size = <DT_SIZE_M(64)>;
@ -170,7 +169,6 @@
hts221@5f {
compatible = "st,hts221";
reg = <0x5f>;
label = "HTS221";
};
};

1
boards/arm/black_f407ve/black_f407ve.dts
View file

@ -134,7 +134,6 @@ zephyr_udc0: &usbotg_fs {
cs-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
w25q16cv: w25q16cv@0 {
compatible = "jedec,spi-nor";
label = "W25Q16CV";
reg = <0>;
spi-max-frequency = <40000000>;
size = <0x1000000>;

8
boards/arm/disco_l475_iot1/disco_l475_iot1.dts
View file

@ -104,32 +104,27 @@
lis3mdl-magn@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
label = "LIS3MDL";
};
hts221@5f {
compatible = "st,hts221";
reg = <0x5f>;
label = "HTS221";
};
lps22hb-press@5d {
compatible = "st,lps22hb-press";
reg = <0x5d>;
label = "LPS22HB";
};
lsm6dsl@6a {
compatible = "st,lsm6dsl";
reg = <0x6a>;
irq-gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
label = "LSM6DSL";
};
vl53l0x@29 {
compatible = "st,vl53l0x";
reg = <0x29>;
label = "VL53L0X";
xshut-gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
};
};
@ -165,7 +160,6 @@
reset-gpios = <&gpioa 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
irq-gpios = <&gpioe 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
spi-max-frequency = <2000000>;
label = "SPBTLE-RF";
};
wifi0: ism43362@1 {
@ -176,7 +170,6 @@
boot0-gpios = <&gpiob 12 GPIO_ACTIVE_HIGH>;
wakeup-gpios = <&gpiob 13 GPIO_ACTIVE_HIGH>;
data-gpios = <&gpioe 1 GPIO_ACTIVE_HIGH>;
label = "ESWIFI0";
};
};
@ -272,7 +265,6 @@ zephyr_udc0: &usbotg_fs {
mx25r6435f: qspi-nor-flash@0 {
compatible = "st,stm32-qspi-nor";
label = "MX25R6435F";
reg = <0>;
qspi-max-frequency = <50000000>;
/* 64 Megabits = 8 Megabytes */

2
boards/arm/legend/legend.dts
View file

@ -64,7 +64,6 @@
led_strip_spi: b1414@0 {
compatible = "everlight,b1414", "worldsemi,ws2812-spi";
label = "B1414";
/* SPI */
reg = <0>; /* ignored, but necessary for SPI bindings */
@ -91,7 +90,6 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <8000000>;
label = "SPI_FLASH_0";
size = <1048576>;
/*
* Main flash source

2
boards/arm/lora_e5_dev_board/lora_e5_dev_board.dts
View file

@ -57,7 +57,6 @@
* Requires closed J15 (D9)
*/
compatible = "regulator-fixed-sync", "regulator-fixed";
label = "pwr-3v3-ctrl";
regulator-name = "pwr-3v3-ctrl";
enable-gpios = <&gpioa 9 GPIO_ACTIVE_HIGH>;
regulator-boot-on;
@ -70,7 +69,6 @@
* Requires closed J6 (D10)
*/
compatible = "regulator-fixed-sync", "regulator-fixed";
label = "pwr-5v-ctrl";
regulator-name = "pwr-5v-ctrl";
enable-gpios = <&gpiob 10 GPIO_ACTIVE_HIGH>;
regulator-boot-on;

7
boards/arm/sensortile_box/sensortile_box.dts
View file

@ -94,14 +94,12 @@
hts221@5f {
compatible = "st,hts221";
reg = <0x5f>;
label = "HTS221";
drdy-gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
};
lps22hh@5d {
compatible = "st,lps22hh";
reg = <0x5d>;
label = "LPS22HH";
drdy-gpios = <&gpiod 15 GPIO_ACTIVE_HIGH>;
};
};
@ -116,7 +114,6 @@
compatible = "st,stts751";
reg = <0x38>;
drdy-gpios = <&gpiog 5 GPIO_ACTIVE_LOW>;
label = "STTS751";
};
};
@ -133,7 +130,6 @@
spi-max-frequency = <1000000>;
reg = <0>;
irq-gpios = <&gpioc 5 GPIO_ACTIVE_HIGH>;
label = "LIS2DW12";
};
lsm6dso@1 {
@ -141,7 +137,6 @@
spi-max-frequency = <1000000>;
reg = <1>;
irq-gpios = <&gpioa 2 GPIO_ACTIVE_HIGH>;
label = "LSM6DSO";
int-pin = <1>;
};
@ -150,7 +145,6 @@
spi-max-frequency = <1000000>;
reg = <2>;
irq-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>, <&gpioe 6 GPIO_ACTIVE_HIGH>;
label = "IIS3DHHC";
};
};
@ -167,7 +161,6 @@
spi-max-frequency = <1000000>;
spi-full-duplex;
reg = <0>;
label = "LIS2MDL";
};
};

2
boards/arm/stm32f3_disco/stm32f3_disco.dts
View file

@ -124,7 +124,6 @@
lsm303dlhc_magn: lsm303dlhc-magn@1e {
compatible = "st,lsm303dlhc-magn";
reg = <0x1e>;
label = "LSM303DLHC-MAGN";
};
lsm303dlhc-accel@19 {
@ -132,7 +131,6 @@
reg = <0x19>;
irq-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>,
<&gpioe 5 GPIO_ACTIVE_HIGH>;
label = "LSM303DLHC-ACCEL";
};
};

3
boards/arm/stm32f3_disco/stm32f3_disco_E.overlay
View file

@ -17,7 +17,6 @@
lsm303agr_magn: lsm303agr-magn@1e {
compatible = "st,lis2mdl", "st,lsm303agr-magn";
reg = <0x1e>;
label = "LSM303AGR-MAGN";
};
lsm303agr-accel@19 {
@ -25,7 +24,6 @@
reg = <0x19>;
irq-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>,
<&gpioe 5 GPIO_ACTIVE_HIGH>;
label = "LSM303AGR-ACCEL";
};
};
@ -35,6 +33,5 @@
compatible = "st,i3g4250d";
reg = <0>;
spi-max-frequency = <1000000>;
label = "I3G4250D";
};
};

2
boards/arm/stm32f411e_disco/stm32f411e_disco.dts
View file

@ -124,7 +124,6 @@
status = "okay";
reg = <0x1e>;
irq-gpios = <&gpioe 2 GPIO_ACTIVE_HIGH>;
label = "LSM303AGR-MAGN";
};
lsm303agr-accel@19 {
@ -133,7 +132,6 @@
reg = <0x19>;
irq-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>,
<&gpioe 5 GPIO_ACTIVE_HIGH>;
label = "LSM303AGR-ACCEL";
};
};

2
boards/arm/stm32f411e_disco/stm32f411e_disco_B.overlay
View file

@ -12,7 +12,6 @@
compatible = "st,lsm303dlhc-magn";
status = "okay";
reg = <0x1e>;
label = "LSM303DLHC-MAGN";
};
lsm303dlhc-accel@19 {
@ -21,6 +20,5 @@
reg = <0x19>;
irq-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>,
<&gpioe 5 GPIO_ACTIVE_HIGH>;
label = "LSM303DLHC-ACCEL";
};
};

1
boards/arm/stm32f412g_disco/stm32f412g_disco.dts
View file

@ -137,7 +137,6 @@
n25q128a1: qspi-nor-flash@0 {
compatible = "st,stm32-qspi-nor";
label = "N25Q128A1";
reg = <0>;
qspi-max-frequency = <72000000>;
size = <DT_SIZE_M(16*8)>;

1
boards/arm/stm32f429i_disc1/stm32f429i_disc1.dts
View file

@ -118,7 +118,6 @@
cs-gpios = <&gpioc 2 GPIO_ACTIVE_LOW>;
ili9341: ili9341@0 {
compatible = "ilitek,ili9341";
label = "ILI9341";
spi-max-frequency = <5625000>;
reg = <0>;
cmd-data-gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;

2
boards/arm/stm32f746g_disco/stm32f746g_disco.dts
View file

@ -92,7 +92,6 @@
touch_controller: ft5336@38 {
compatible = "focaltech,ft5336";
reg = <0x38>;
label = "FT5336";
int-gpios = <&gpioi 13 0>;
};
};
@ -171,7 +170,6 @@ zephyr_udc0: &usbotg_fs {
n25q128a1: qspi-nor-flash@0 {
compatible = "st,stm32-qspi-nor";
label = "N25Q128A1";
reg = <0>;
qspi-max-frequency = <72000000>;
size = <DT_SIZE_M(16*8)>;

2
boards/arm/stm32f7508_dk/stm32f7508_dk.dts
View file

@ -93,7 +93,6 @@
touch_controller: ft5336@38 {
compatible = "focaltech,ft5336";
reg = <0x38>;
label = "FT5336";
int-gpios = <&gpioi 13 0>;
};
};
@ -172,7 +171,6 @@ zephyr_udc0: &usbotg_fs {
n25q128a1: qspi-nor-flash@0 {
compatible = "st,stm32-qspi-nor";
label = "N25Q128A1";
reg = <0>;
qspi-max-frequency = <72000000>;
size = <DT_SIZE_M(16*8)>;

2
boards/arm/stm32f769i_disco/stm32f769i_disco.dts
View file

@ -124,7 +124,6 @@ arduino_serial: &usart6 {};
touch_controller: ft6202@2a {
compatible = "focaltech,ft5336";
reg = <0x2a>;
label = "FT6202";
int-gpios = <&gpioi 13 0>;
};
};
@ -167,7 +166,6 @@ arduino_serial: &usart6 {};
mx25l51245g: qspi-nor-flash@0 {
compatible = "st,stm32-qspi-nor";
label = "MX25L51245G";
reg = <0>;
qspi-max-frequency = <72000000>;
size = <DT_SIZE_M(64*8)>;

1
boards/arm/stm32g071b_disco/stm32g071b_disco.dts
View file

@ -137,7 +137,6 @@
vbus_meas: ina230@40 {
status = "okay";
compatible = "ti,ina230";
label = "VBUS";
reg = <0x40>;
config = <INA230_CONFIG(
INA230_OPER_MODE_BUS_VOLTAGE_CONT,

1
boards/arm/stm32g081b_eval/stm32g081b_eval.dts
View file

@ -71,7 +71,6 @@
*/
discharge_vbus2 {
gpios = <&gpiob 14 GPIO_ACTIVE_HIGH>;
label = "DISCHARGE_VBUS2";
};
};

1
boards/arm/stm32h735g_disco/stm32h735g_disco.dts
View file

@ -131,7 +131,6 @@
mx25lm51245: ospi-nor-flash@0 {
compatible = "st,stm32-ospi-nor";
label = "MX25LM51245";
reg = <0>;
ospi-max-frequency = <DT_FREQ_M(50)>;
size = <DT_SIZE_M(64)>;

2
boards/arm/stm32h7b3i_dk/stm32h7b3i_dk.dts
View file

@ -126,7 +126,6 @@
touch_controller: ft5336@38 {
compatible = "focaltech,ft5336";
reg = <0x38>;
label = "FT5336";
int-gpios = <&gpioh 2 0>;
};
};
@ -238,7 +237,6 @@
mx25lm51245: ospi-nor-flash@0 {
compatible = "st,stm32-ospi-nor";
label = "MX25LM51245";
reg = <0>;
ospi-max-frequency = <DT_FREQ_M(50)>;
size = <DT_SIZE_M(64)>;

3
boards/arm/stm32l562e_dk/stm32l562e_dk_common.dtsi
View file

@ -107,7 +107,6 @@
compatible = "st,lsm6dso";
reg = <0x6a>;
irq-gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
label = "LSM6DSO";
};
};
@ -127,7 +126,6 @@
irq-gpios = <&gpiog 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
reset-gpios = <&gpiog 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
spi-max-frequency = <2000000>;
label = "SPBTLE-RF";
};
};
@ -144,7 +142,6 @@
mx25lm51245: ospi-nor-flash@0 {
compatible = "st,stm32-ospi-nor";
label = "MX25LM51245";
reg = <0>;
ospi-max-frequency = <DT_FREQ_M(50)>;
size = <DT_SIZE_M(64)>;