boards: Add support for the CC3220SF_LAUNCHXL board
CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL, with support for the CC3220SF SoC, which is an update for the CC3200 SoC. This is supported by the Texas Instruments CC3220 SDK. Jira: ZEP-1958 Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2 Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This commit is contained in:
Gil Pitney
Kumar Gala
parent
c73a1eb806
commit
70040f0e11
19 changed files with 557 additions and 2 deletions
6
boards/arm/cc3220sf_launchxl/Kconfig.board
Normal file
6
boards/arm/cc3220sf_launchxl/Kconfig.board
Normal file
|
|
@ -0,0 +1,6 @@
|
||||||
|
# Kconfig - TI SimpleLink CC3220SF LaunchXL Board
|
||||||
|
#
|
||||||
|
|
||||||
|
config BOARD_CC3220SF_LAUNCHXL
|
||||||
|
bool "TI CC3220SF LAUNCHXL"
|
||||||
|
depends on SOC_CC3220SF
|
||||||
9
boards/arm/cc3220sf_launchxl/Kconfig.defconfig
Normal file
9
boards/arm/cc3220sf_launchxl/Kconfig.defconfig
Normal file
|
|
@ -0,0 +1,9 @@
|
||||||
|
# Kconfig - TI CC3220SF LaunchXL board configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
if BOARD_CC3220SF_LAUNCHXL
|
||||||
|
|
||||||
|
config BOARD
|
||||||
|
default cc3220sf_launchxl
|
||||||
|
|
||||||
|
endif # BOARD_CC3220SF_LAUNCHXL
|
||||||
4
boards/arm/cc3220sf_launchxl/Makefile
Normal file
4
boards/arm/cc3220sf_launchxl/Makefile
Normal file
|
|
@ -0,0 +1,4 @@
|
||||||
|
ccflags-y += -I$(srctree)/include/drivers
|
||||||
|
ccflags-y += -I$(srctree)/drivers
|
||||||
|
obj-y += pinmux.o
|
||||||
|
obj-$(CONFIG_CC3220SF_DEBUG) += dbghdr.o
|
||||||
25
boards/arm/cc3220sf_launchxl/board.h
Normal file
25
boards/arm/cc3220sf_launchxl/board.h
Normal file
|
|
@ -0,0 +1,25 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2017, Texas Instruments Incorporated
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*/
|
||||||
|
#ifndef __INC_BOARD_H
|
||||||
|
#define __INC_BOARD_H
|
||||||
|
|
||||||
|
/* Push button switch 2 */
|
||||||
|
#define SW2_GPIO_PIN 6 /* GPIO22/Pin15 */
|
||||||
|
#define SW2_GPIO_NAME "GPIO_A2"
|
||||||
|
|
||||||
|
/* Push button switch 3 */
|
||||||
|
#define SW3_GPIO_PIN 5 /* GPIO13/Pin4 */
|
||||||
|
#define SW3_GPIO_NAME "GPIO_A1"
|
||||||
|
|
||||||
|
/* Push button switch 0: Map to SW2 so zephyr button example works */
|
||||||
|
#define SW0_GPIO_PIN SW2_GPIO_PIN
|
||||||
|
#define SW0_GPIO_NAME SW2_GPIO_NAME
|
||||||
|
|
||||||
|
/* Onboard GREEN LED */
|
||||||
|
#define LED0_GPIO_PIN 3 /*GPIO11/Pin2 */
|
||||||
|
#define LED0_GPIO_PORT "GPIO_A1"
|
||||||
|
|
||||||
|
#endif /* __INC_BOARD_H */
|
||||||
28
boards/arm/cc3220sf_launchxl/cc3220sf_launchxl_defconfig
Normal file
28
boards/arm/cc3220sf_launchxl/cc3220sf_launchxl_defconfig
Normal file
|
|
@ -0,0 +1,28 @@
|
||||||
|
CONFIG_ARM=y
|
||||||
|
CONFIG_BOARD_CC3220SF_LAUNCHXL=y
|
||||||
|
CONFIG_SOC_FAMILY_TISIMPLELINK=y
|
||||||
|
CONFIG_SOC_SERIES_CC32XX=y
|
||||||
|
CONFIG_SOC_CC3220SF=y
|
||||||
|
CONFIG_CORTEX_M_SYSTICK=y
|
||||||
|
CONFIG_FLASH=y
|
||||||
|
CONFIG_XIP=n
|
||||||
|
|
||||||
|
CONFIG_PRINTK=y
|
||||||
|
|
||||||
|
#enable GPIO driver
|
||||||
|
CONFIG_GPIO=y
|
||||||
|
|
||||||
|
# enable uart driver
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
CONFIG_SERIAL_HAS_DRIVER=y
|
||||||
|
CONFIG_UART_CC32XX=y
|
||||||
|
|
||||||
|
# enable console
|
||||||
|
CONFIG_CONSOLE=y
|
||||||
|
CONFIG_UART_CONSOLE=y
|
||||||
|
|
||||||
|
# Enable CC3220 SDK
|
||||||
|
CONFIG_HAS_CC3220SDK=y
|
||||||
|
|
||||||
|
# Enable DTS parsing
|
||||||
|
CONFIG_HAS_DTS=y
|
||||||
24
boards/arm/cc3220sf_launchxl/dbghdr.c
Normal file
24
boards/arm/cc3220sf_launchxl/dbghdr.c
Normal file
|
|
@ -0,0 +1,24 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2017, Texas Instruments Incorporated
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: Apache-2.0
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This debug header, located at the start of flash, indicates
|
||||||
|
* to the bootloader that this is a debug image, allowing
|
||||||
|
* debuggers and flash-loaders to access the chip over JTAG.
|
||||||
|
* Also, on subsequent reboots, the bootloader skips the integrity
|
||||||
|
* check, preventing the image from being mass erased.
|
||||||
|
*
|
||||||
|
* See section 21.10: "Debugging Flash User Application Using JTAG"
|
||||||
|
* in the CC3220 TRM: http://www.ti.com/lit/ug/swru465/swru465.pdf
|
||||||
|
*/
|
||||||
|
#ifdef CONFIG_CC3220SF_DEBUG
|
||||||
|
__attribute__ ((section(".dbghdr")))
|
||||||
|
const unsigned long ulDebugHeader[] = {
|
||||||
|
0x5AA5A55A,
|
||||||
|
0x000FF800,
|
||||||
|
0xEFA3247D
|
||||||
|
};
|
||||||
|
#endif
|
||||||
221
boards/arm/cc3220sf_launchxl/doc/cc3220sf_launchxl.rst
Normal file
221
boards/arm/cc3220sf_launchxl/doc/cc3220sf_launchxl.rst
Normal file
|
|
@ -0,0 +1,221 @@
|
||||||
|
.. _cc3220sf_launchxl:
|
||||||
|
|
||||||
|
CC3220SF LaunchXL
|
||||||
|
#################
|
||||||
|
|
||||||
|
Overview
|
||||||
|
********
|
||||||
|
The SimpleLink Wi-Fi CC3220SF LaunchPad development kit (CC3220SF-LAUNCHXL)
|
||||||
|
highlights CC3220SF, a single-chip wireless microcontroller (MCU) with
|
||||||
|
1MB Flash, 256KB of RAM and enhanced security features.
|
||||||
|
|
||||||
|
See the `TI CC3220 Product Page`_ for details.
|
||||||
|
|
||||||
|
Features:
|
||||||
|
=========
|
||||||
|
|
||||||
|
* Two separate execution environments: a user application dedicated ARM
|
||||||
|
Cortex-M4 MCU and a network processor MCU to run all Wi-Fi and
|
||||||
|
internet logical layers
|
||||||
|
* 40-pin LaunchPad standard leveraging the BoosterPack ecosystem
|
||||||
|
* On-board accelerometer and temperature sensor
|
||||||
|
* Two buttons and three LEDs for user interaction
|
||||||
|
* UART through USB to PC
|
||||||
|
* BoosterPack plug-in module for adding graphical displays, audio
|
||||||
|
codecs, antenna selection, environmental sensing, and more
|
||||||
|
* Power from USB for the LaunchPad and optional external BoosterPack
|
||||||
|
* XDS110-based JTAG emulation with serial port for flash programming
|
||||||
|
|
||||||
|
Details on the CC3220SF LaunchXL development board can be found in the
|
||||||
|
`CC3220SF LaunchXL User's Guide`_.
|
||||||
|
|
||||||
|
Hardware
|
||||||
|
********
|
||||||
|
|
||||||
|
The CC3220SF SoC has two MCUs:
|
||||||
|
|
||||||
|
#. Applications MCU - an ARM® Cortex®-M4 Core at 80 MHz, with 256Kb RAM,
|
||||||
|
and access to external serial 1Mb flash with bootloader and peripheral
|
||||||
|
drivers in ROM.
|
||||||
|
|
||||||
|
#. Network Coprocessor (NWP) - a dedicated ARM MCU, which completely
|
||||||
|
offloads Wi-Fi and internet protocols from the application MCU.
|
||||||
|
|
||||||
|
Complete details of the CC3220SF SoC can be found in the `CC3220 TRM`_.
|
||||||
|
|
||||||
|
Supported Features
|
||||||
|
==================
|
||||||
|
|
||||||
|
Zephyr has been ported to the Applications MCU, with basic peripheral
|
||||||
|
driver support.
|
||||||
|
|
||||||
|
+-----------+------------+-----------------------+
|
||||||
|
| Interface | Controller | Driver/Component |
|
||||||
|
+===========+============+=======================+
|
||||||
|
| UART | on-chip | serial port-interrupt |
|
||||||
|
+-----------+------------+-----------------------+
|
||||||
|
| GPIO | on-chip | gpio |
|
||||||
|
+-----------+------------+-----------------------+
|
||||||
|
|
||||||
|
The accelerometer, temperature sensors, or other peripherals
|
||||||
|
accessible through the BoosterPack, are not currently supported.
|
||||||
|
|
||||||
|
Connections and IOs
|
||||||
|
====================
|
||||||
|
|
||||||
|
Peripherals on the CC3220SF LaunchXL are mapped to the following pins in
|
||||||
|
the file :file:`boards/arm/cc3220sf_launchxl/pinmux.c`.
|
||||||
|
|
||||||
|
+------------+-------+-------+
|
||||||
|
| Function | PIN | GPIO |
|
||||||
|
+============+=======+=======+
|
||||||
|
| UART0_TX | 55 | N/A |
|
||||||
|
+------------+-------+-------+
|
||||||
|
| UART0_RX | 57 | N/A |
|
||||||
|
+------------+-------+-------+
|
||||||
|
| LED D7 (R) | 64 | 9 |
|
||||||
|
+------------+-------+-------+
|
||||||
|
| LED D6 (O) | 01 | 10 |
|
||||||
|
+------------+-------+-------+
|
||||||
|
| LED D5 (G) | 02 | 11 |
|
||||||
|
+------------+-------+-------+
|
||||||
|
| Switch SW2 | 15 | 22 |
|
||||||
|
+------------+-------+-------+
|
||||||
|
| Switch SW3 | 04 | 13 |
|
||||||
|
+------------+-------+-------+
|
||||||
|
|
||||||
|
The default configuration can be found in the Kconfig file at
|
||||||
|
:file:`boards/arm/cc3220sf_launchxl/cc3220sf_launchxl_defconfig`.
|
||||||
|
|
||||||
|
|
||||||
|
Programming and Debugging
|
||||||
|
*************************
|
||||||
|
|
||||||
|
TI offically supports development on the CC3220SF using the TI
|
||||||
|
`CC3220 SDK`_ on Windows using TI tools: Code Composer Studio for
|
||||||
|
debugging and `UniFlash`_ for flashing.
|
||||||
|
|
||||||
|
For Windows developers, see the `CC3220 Getting Started Guide`_ for
|
||||||
|
instructions on installation of tools, and how to flash the board using
|
||||||
|
UniFlash.
|
||||||
|
|
||||||
|
The following instructions are geared towards Linux developers.
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
========
|
||||||
|
|
||||||
|
The TI UniFlash tool can be used to download a program into flash, which
|
||||||
|
will persist over subsequent reboots.
|
||||||
|
|
||||||
|
Prerequisites:
|
||||||
|
--------------
|
||||||
|
|
||||||
|
#. Python 2.7 (the DSLite tool does not work with Python v 3.x).
|
||||||
|
#. Download and install `UniFlash`_ version 4.1 for Linux.
|
||||||
|
#. Jumper SOP[2..0] (J15) to 010, and connect the USB cable to the PC.
|
||||||
|
|
||||||
|
This should result in a new device "Texas Instruments XDS110 Embed
|
||||||
|
with CMSIS-DAP" appearing at /dev/ttyACM1 and /dev/ttyACM0.
|
||||||
|
|
||||||
|
#. Update the service pack, and place board in "Development Mode".
|
||||||
|
|
||||||
|
Follow the instructions in Section 3.4 "Download the Application",
|
||||||
|
in the `CC3220 Getting Started Guide`_, except for steps 5 and 6 which
|
||||||
|
select an MCU image.
|
||||||
|
|
||||||
|
#. Ensure the XDS-110 emulation firmware is updated.
|
||||||
|
|
||||||
|
Download and install the latest `XDS-110 emulation package`_.
|
||||||
|
Follow the directions here to update the firmware:
|
||||||
|
http://processors.wiki.ti.com/index.php/XDS110#Updating_the_XDS110_Firmware
|
||||||
|
|
||||||
|
#. Ensure CONFIG_XIP=y is set.
|
||||||
|
|
||||||
|
The default board configuration file can be found at
|
||||||
|
:file:`boards/arm/cc3220sf_launchxl/cc3220sf_launchxl_defconfig`.
|
||||||
|
|
||||||
|
This locates the program into flash, and sets CONFIG_CC3220SF_DEBUG=y,
|
||||||
|
which prepends a debug header enabling the flash to persist over
|
||||||
|
subsequent reboots, bypassing the bootloader flash signature
|
||||||
|
verification.
|
||||||
|
|
||||||
|
See Section of the 21.10 of the `CC3220 TRM`_ for details on the
|
||||||
|
secure flash boot process.
|
||||||
|
|
||||||
|
Flashing Command:
|
||||||
|
-----------------
|
||||||
|
|
||||||
|
Once the above prerequisites are met, use the UniFlash command line tool
|
||||||
|
to flash the Zephyr image:
|
||||||
|
|
||||||
|
.. code-block:: console
|
||||||
|
|
||||||
|
% dslite.sh -c $ZEPHYR_BASE/boards/arm/cc3220sf_launchxl/support/CC3220SF.ccxml \
|
||||||
|
-e -f zephyr.elf
|
||||||
|
|
||||||
|
The CC3220SF.ccxml is a configuration file written by TI's Code Composer
|
||||||
|
Studio IDE, and required for the dslite.sh tool.
|
||||||
|
|
||||||
|
To see program output from UART0, one can execute in a separate terminal
|
||||||
|
window:
|
||||||
|
|
||||||
|
.. code-block:: console
|
||||||
|
|
||||||
|
% screen /dev/ttyACM0 115200 8N1
|
||||||
|
|
||||||
|
Debugging
|
||||||
|
=========
|
||||||
|
|
||||||
|
It is possible to enable loading and debugging of an application via
|
||||||
|
OpenOCD and gdb, by linking and locating the program completely in SRAM.
|
||||||
|
|
||||||
|
Prerequisites:
|
||||||
|
--------------
|
||||||
|
|
||||||
|
Follow the same prerequisites as in Flashing above, in addition:
|
||||||
|
|
||||||
|
#. Ensure OpenOCD v0.9+ is configured/built with CMSIS-DAP support.
|
||||||
|
#. Power off the board, jumper SOP[2..0] (J15) to 001, and reconnect
|
||||||
|
the USB cable to the PC.
|
||||||
|
#. Set CONFIG_XIP=n and build the Zephyr elf file.
|
||||||
|
|
||||||
|
The necessary OpenOCD CFG and sample gdbinit scripts can be found in
|
||||||
|
:file:`boards/arm/cc3220sf_launchxl/support/`.
|
||||||
|
|
||||||
|
Debugging Command
|
||||||
|
-----------------
|
||||||
|
|
||||||
|
.. code-block:: console
|
||||||
|
|
||||||
|
% arm-none-eabi-gdb -x $ZEPHYR_BASE/boards/arm/cc3220sf_launchxl/support/gdbinit_xds110 \
|
||||||
|
zephyr.elf
|
||||||
|
|
||||||
|
References
|
||||||
|
**********
|
||||||
|
|
||||||
|
CC32xx Wiki:
|
||||||
|
http://processors.wiki.ti.com/index.php/CC31xx_%26_CC32xx
|
||||||
|
|
||||||
|
.. _TI CC3220 Product Page:
|
||||||
|
http://www.ti.com/product/cc3220
|
||||||
|
|
||||||
|
.. _CC3220 TRM:
|
||||||
|
http://www.ti.com/lit/ug/swru465/swru465.pdf
|
||||||
|
|
||||||
|
.. _CC3220 Programmer's Guide:
|
||||||
|
http://www.ti.com/lit/ug/swru464/swru464.pdf
|
||||||
|
|
||||||
|
.. _CC3220 Getting Started Guide:
|
||||||
|
http://www.ti.com/lit/ug/swru461/swru461.pdf
|
||||||
|
|
||||||
|
.. _UniFlash:
|
||||||
|
http://processors.wiki.ti.com/index.php/Category:CCS_UniFlash
|
||||||
|
|
||||||
|
.. _CC3220 SDK:
|
||||||
|
http://www.ti.com/tool/download/SIMPLELINK-CC3220-SDK
|
||||||
|
|
||||||
|
.. _CC3220SF LaunchXL User's Guide:
|
||||||
|
http://www.ti.com/lit/ug/swru463/swru463.pdf
|
||||||
|
|
||||||
|
.. _XDS-110 emulation package:
|
||||||
|
http://processors.wiki.ti.com/index.php/XDS_Emulation_Software_Package#XDS110_Reset_Download
|
||||||
121
boards/arm/cc3220sf_launchxl/pinmux.c
Normal file
121
boards/arm/cc3220sf_launchxl/pinmux.c
Normal file
|
|
@ -0,0 +1,121 @@
|
||||||
|
/*
|
||||||
|
* pinmux.c
|
||||||
|
*
|
||||||
|
* configure the device pins for different peripheral signals
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
*
|
||||||
|
* Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
*
|
||||||
|
* Neither the name of Texas Instruments Incorporated nor the names of
|
||||||
|
* its contributors may be used to endorse or promote products derived
|
||||||
|
* from this software without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This file was automatically generated on 7/21/2014 at 3:06:20 PM
|
||||||
|
* by TI PinMux version 3.0.334
|
||||||
|
* (Then modified to meet Zephyr coding style)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* TI Recommends use of the PinMux utility to ensure consistent configuration
|
||||||
|
* of pins: http://processors.wiki.ti.com/index.php/TI_PinMux_Tool
|
||||||
|
*
|
||||||
|
* Zephyr GPIO API however allows runtime configuration by applications.
|
||||||
|
*
|
||||||
|
* For the TI CC32XX port we leverage this output file
|
||||||
|
* from the PinMux tool, and guard sections based on Kconfig variables.
|
||||||
|
*
|
||||||
|
* The individual (uart/gpio) driver init/configuration functions
|
||||||
|
* therefore assume pinmux initialization is done here rather in the drivers
|
||||||
|
* at runtime.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <init.h>
|
||||||
|
|
||||||
|
#include "pinmux.h"
|
||||||
|
|
||||||
|
#include <inc/hw_types.h>
|
||||||
|
#include <inc/hw_memmap.h>
|
||||||
|
#include <inc/hw_gpio.h>
|
||||||
|
#include <driverlib/pin.h>
|
||||||
|
#include <driverlib/rom.h>
|
||||||
|
#include <driverlib/rom_map.h>
|
||||||
|
#include <driverlib/gpio.h>
|
||||||
|
#include <driverlib/prcm.h>
|
||||||
|
|
||||||
|
int pinmux_initialize(struct device *port)
|
||||||
|
{
|
||||||
|
ARG_UNUSED(port);
|
||||||
|
|
||||||
|
#ifdef CONFIG_UART_CC32XX
|
||||||
|
/* Configure PIN_55 for UART0 UART0_TX */
|
||||||
|
MAP_PinTypeUART(PIN_55, PIN_MODE_3);
|
||||||
|
|
||||||
|
/* Configure PIN_57 for UART0 UART0_RX */
|
||||||
|
MAP_PinTypeUART(PIN_57, PIN_MODE_3);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_GPIO_CC32XX_A1
|
||||||
|
/* Enable Peripheral Clocks */
|
||||||
|
MAP_PRCMPeripheralClkEnable(PRCM_GPIOA1, PRCM_RUN_MODE_CLK);
|
||||||
|
|
||||||
|
/* The following enables the 3 LEDs for the blinking samples */
|
||||||
|
|
||||||
|
/* Configure PIN_64 for GPIOOutput */
|
||||||
|
MAP_PinTypeGPIO(PIN_64, PIN_MODE_0, false);
|
||||||
|
MAP_GPIODirModeSet(GPIOA1_BASE, 0x2, GPIO_DIR_MODE_OUT);
|
||||||
|
|
||||||
|
/* Configure PIN_01 for GPIOOutput */
|
||||||
|
MAP_PinTypeGPIO(PIN_01, PIN_MODE_0, false);
|
||||||
|
MAP_GPIODirModeSet(GPIOA1_BASE, 0x4, GPIO_DIR_MODE_OUT);
|
||||||
|
|
||||||
|
/* Configure PIN_02 for GPIOOutput */
|
||||||
|
MAP_PinTypeGPIO(PIN_02, PIN_MODE_0, false);
|
||||||
|
MAP_GPIODirModeSet(GPIOA1_BASE, 0x8, GPIO_DIR_MODE_OUT);
|
||||||
|
|
||||||
|
/* SW3: Configure PIN_04 (GPIO13) for GPIOInput */
|
||||||
|
MAP_PinTypeGPIO(PIN_04, PIN_MODE_0, false);
|
||||||
|
MAP_GPIODirModeSet(GPIOA1_BASE, 0x20, GPIO_DIR_MODE_IN);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_GPIO_CC32XX_A2
|
||||||
|
MAP_PRCMPeripheralClkEnable(PRCM_GPIOA2, PRCM_RUN_MODE_CLK);
|
||||||
|
|
||||||
|
/* SW2: Configure PIN_15 (GPIO22) for GPIOInput */
|
||||||
|
MAP_PinTypeGPIO(PIN_15, PIN_MODE_0, false);
|
||||||
|
MAP_GPIODirModeSet(GPIOA2_BASE, 0x40, GPIO_DIR_MODE_IN);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_GPIO_CC32XX_A3
|
||||||
|
MAP_PRCMPeripheralClkEnable(PRCM_GPIOA3, PRCM_RUN_MODE_CLK);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
SYS_INIT(pinmux_initialize, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT);
|
||||||
14
boards/arm/cc3220sf_launchxl/support/CC3220SF.ccxml
Normal file
14
boards/arm/cc3220sf_launchxl/support/CC3220SF.ccxml
Normal file
|
|
@ -0,0 +1,14 @@
|
||||||
|
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||||
|
<configurations XML_version="1.2" id="configurations_0">
|
||||||
|
<configuration XML_version="1.2" id="configuration_0">
|
||||||
|
<instance XML_version="1.2" desc="Texas Instruments XDS110 USB Debug Probe" href="connections/TIXDS110_Connection.xml" id="Texas Instruments XDS110 USB Debug Probe" xml="TIXDS110_Connection.xml" xmlpath="connections"/>
|
||||||
|
<connection XML_version="1.2" id="Texas Instruments XDS110 USB Debug Probe">
|
||||||
|
<instance XML_version="1.2" href="drivers/tixds510icepick_c.xml" id="drivers" xml="tixds510icepick_c.xml" xmlpath="drivers"/>
|
||||||
|
<instance XML_version="1.2" href="drivers/tixds510cs_dap.xml" id="drivers" xml="tixds510cs_dap.xml" xmlpath="drivers"/>
|
||||||
|
<instance XML_version="1.2" href="drivers/tixds510cortexM.xml" id="drivers" xml="tixds510cortexM.xml" xmlpath="drivers"/>
|
||||||
|
<platform XML_version="1.2" id="platform_0">
|
||||||
|
<instance XML_version="1.2" desc="CC3220SF" href="devices/CC3220SF.xml" id="CC3220SF" xml="CC3220SF.xml" xmlpath="devices"/>
|
||||||
|
</platform>
|
||||||
|
</connection>
|
||||||
|
</configuration>
|
||||||
|
</configurations>
|
||||||
45
boards/arm/cc3220sf_launchxl/support/cc3220_xds110.cfg
Normal file
45
boards/arm/cc3220sf_launchxl/support/cc3220_xds110.cfg
Normal file
|
|
@ -0,0 +1,45 @@
|
||||||
|
#*****************************************************************************
|
||||||
|
#
|
||||||
|
# Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
#
|
||||||
|
#*****************************************************************************
|
||||||
|
|
||||||
|
#
|
||||||
|
# CC3220 via CMSIS-DAP interface on XDS110 debug probe
|
||||||
|
#
|
||||||
|
# CMSIS-DAP support in OpenOCD can only use SWD mode. So
|
||||||
|
# jumper SOP0 only, and reset the target before connect.
|
||||||
|
#
|
||||||
|
|
||||||
|
interface cmsis-dap
|
||||||
|
cmsis_dap_vid_pid 0x0451 0xbef3
|
||||||
|
adapter_khz 2500
|
||||||
|
|
||||||
|
set _ENDIAN little
|
||||||
|
|
||||||
|
if { [info exists CHIPNAME] } {
|
||||||
|
set _CHIPNAME $CHIPNAME
|
||||||
|
} else {
|
||||||
|
set _CHIPNAME cc3220
|
||||||
|
}
|
||||||
|
|
||||||
|
if { [info exists DAP_TAPID] } {
|
||||||
|
set _DAP_TAPID $DAP_TAPID
|
||||||
|
} else {
|
||||||
|
set _DAP_TAPID 0x0b97c02f
|
||||||
|
}
|
||||||
|
|
||||||
|
swd newdap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable
|
||||||
|
|
||||||
|
set _TARGETNAME $_CHIPNAME.cpu
|
||||||
|
|
||||||
|
target create $_CHIPNAME.cpu cortex_m -endian little -chain-position $_CHIPNAME.dap
|
||||||
|
$_CHIPNAME.cpu configure -work-area-phys 0x20000000 -work-area-size 0x30000 -work-area-backup 0 -coreid 0
|
||||||
|
|
||||||
|
source [find mem_helper.tcl]
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event gdb-attach {
|
||||||
|
halt
|
||||||
|
}
|
||||||
16
boards/arm/cc3220sf_launchxl/support/gdbinit_xds110
Normal file
16
boards/arm/cc3220sf_launchxl/support/gdbinit_xds110
Normal file
|
|
@ -0,0 +1,16 @@
|
||||||
|
#*****************************************************************************
|
||||||
|
#
|
||||||
|
# Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: Apache-2.0
|
||||||
|
#
|
||||||
|
#*****************************************************************************
|
||||||
|
|
||||||
|
# Modify to point to your own Zephyr base:
|
||||||
|
target remote | openocd -c "gdb_port pipe; log_output openocd.log" -f ~/zephyr/boards/arm/cc3220sf_launchxl/support/cc3220_xds110.cfg
|
||||||
|
|
||||||
|
monitor soft_reset_halt
|
||||||
|
load
|
||||||
|
|
||||||
|
break _Cstart
|
||||||
|
set remotetimeout 10000
|
||||||
|
|
@ -4,6 +4,7 @@ dtb-$(CONFIG_BOARD_FRDM_KW41Z) = frdm_kw41z.dts_compiled
|
||||||
dtb-$(CONFIG_BOARD_HEXIWEAR_K64) = hexiwear_k64.dts_compiled
|
dtb-$(CONFIG_BOARD_HEXIWEAR_K64) = hexiwear_k64.dts_compiled
|
||||||
dtb-$(CONFIG_BOARD_HEXIWEAR_KW40Z) = hexiwear_kw40z.dts_compiled
|
dtb-$(CONFIG_BOARD_HEXIWEAR_KW40Z) = hexiwear_kw40z.dts_compiled
|
||||||
dtb-$(CONFIG_BOARD_CC3200_LAUNCHXL) = cc3200_launchxl.dts_compiled
|
dtb-$(CONFIG_BOARD_CC3200_LAUNCHXL) = cc3200_launchxl.dts_compiled
|
||||||
|
dtb-$(CONFIG_BOARD_CC3220SF_LAUNCHXL) = cc3220sf_launchxl.dts_compiled
|
||||||
dtb-$(CONFIG_BOARD_NUCLEO_L476RG) = nucleo_l476rg.dts_compiled
|
dtb-$(CONFIG_BOARD_NUCLEO_L476RG) = nucleo_l476rg.dts_compiled
|
||||||
dtb-$(CONFIG_BOARD_V2M_BEETLE) = v2m_beetle.dts_compiled
|
dtb-$(CONFIG_BOARD_V2M_BEETLE) = v2m_beetle.dts_compiled
|
||||||
dtb-$(CONFIG_BOARD_OLIMEXINO_STM32) = olimexino_stm32.dts_compiled
|
dtb-$(CONFIG_BOARD_OLIMEXINO_STM32) = olimexino_stm32.dts_compiled
|
||||||
|
|
|
||||||
23
dts/arm/cc3220sf_launchxl.dts
Normal file
23
dts/arm/cc3220sf_launchxl.dts
Normal file
|
|
@ -0,0 +1,23 @@
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include <ti/cc32xx.dtsi>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "TI CC3220SF LaunchXL";
|
||||||
|
compatible = "ti,cc3220sf-launchxl", "ti,cc3220sf", "ti,cc32xx";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
uart_0 = &uart0;
|
||||||
|
uart_1 = &uart1;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
zephyr,sram = &sram0;
|
||||||
|
zephyr,flash = &flash1;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart0 {
|
||||||
|
status = "ok";
|
||||||
|
baud-rate = <115200>;
|
||||||
|
};
|
||||||
1
dts/arm/cc3220sf_launchxl.fixup
Normal file
1
dts/arm/cc3220sf_launchxl.fixup
Normal file
|
|
@ -0,0 +1 @@
|
||||||
|
#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
|
||||||
|
|
@ -24,6 +24,10 @@
|
||||||
reg = <0x0 DT_SFLASH_SIZE>;
|
reg = <0x0 DT_SFLASH_SIZE>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
flash1: flash {
|
||||||
|
reg = <0x01000000 DT_FLASH_SIZE>;
|
||||||
|
};
|
||||||
|
|
||||||
soc {
|
soc {
|
||||||
uart0: uart@4000C000 {
|
uart0: uart@4000C000 {
|
||||||
compatible = "ti,cc32xx-uart";
|
compatible = "ti,cc32xx-uart";
|
||||||
|
|
|
||||||
|
|
@ -7,6 +7,11 @@
|
||||||
#define DT_SFLASH_SIZE __SIZE_K(1024)
|
#define DT_SFLASH_SIZE __SIZE_K(1024)
|
||||||
#define DT_SRAM_SIZE __SIZE_K(240)
|
#define DT_SRAM_SIZE __SIZE_K(240)
|
||||||
#define DT_SRAM_START 0x20004000
|
#define DT_SRAM_START 0x20004000
|
||||||
|
#elif defined(CONFIG_SOC_CC3220SF)
|
||||||
|
#define DT_SFLASH_SIZE __SIZE_K(1024)
|
||||||
|
#define DT_FLASH_SIZE __SIZE_K(1024)
|
||||||
|
#define DT_SRAM_SIZE __SIZE_K(256)
|
||||||
|
#define DT_SRAM_START 0x20000000
|
||||||
#else
|
#else
|
||||||
#error "Flash and RAM sizes not defined for this chip"
|
#error "Flash and RAM sizes not defined for this chip"
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -80,6 +80,13 @@ SECTIONS
|
||||||
|
|
||||||
SECTION_PROLOGUE(_TEXT_SECTION_NAME,,)
|
SECTION_PROLOGUE(_TEXT_SECTION_NAME,,)
|
||||||
{
|
{
|
||||||
|
#ifdef CONFIG_CC3220SF_DEBUG
|
||||||
|
/* Add CC3220SF flash header to disable flash verification */
|
||||||
|
. = 0x0;
|
||||||
|
KEEP(*(.dbghdr))
|
||||||
|
KEEP(*(".dbghdr.*"))
|
||||||
|
#endif
|
||||||
|
|
||||||
. = CONFIG_TEXT_SECTION_OFFSET;
|
. = CONFIG_TEXT_SECTION_OFFSET;
|
||||||
KEEP(*(.exc_vector_table))
|
KEEP(*(.exc_vector_table))
|
||||||
KEEP(*(".exc_vector_table.*"))
|
KEEP(*(".exc_vector_table.*"))
|
||||||
|
|
|
||||||
|
|
@ -6,7 +6,8 @@ platforms = qemu_cortex_m3 frdm_k64f arduino_due nucleo_f103rb stm32_mini_a15
|
||||||
arduino_101_ble cc3200_launchxl quark_se_c1000_ble bbc_microbit
|
arduino_101_ble cc3200_launchxl quark_se_c1000_ble bbc_microbit
|
||||||
v2m_beetle nucleo_l476rg nrf52840_pca10056 nucleo_f411re
|
v2m_beetle nucleo_l476rg nrf52840_pca10056 nucleo_f411re
|
||||||
stm3210c_eval nucleo_f334r8 stm32373c_eval mps2_an385 frdm_kw41z
|
stm3210c_eval nucleo_f334r8 stm32373c_eval mps2_an385 frdm_kw41z
|
||||||
sam_e70_xplained curie_ble nrf52_blenano2 hexiwear_kw40z
|
sam_e70_xplained curie_ble nrf52_blenano2 hexiwear_kw40z
|
||||||
|
cc3220sf_launchxl
|
||||||
|
|
||||||
supported_toolchains = zephyr gccarmemb
|
supported_toolchains = zephyr gccarmemb
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,6 @@
|
||||||
[test]
|
[test]
|
||||||
tags = core bat_commit
|
tags = core bat_commit
|
||||||
platform_exclude = cc3200_launchxl
|
platform_exclude = cc3200_launchxl cc3220sf_launchxl
|
||||||
filter = not CONFIG_SOC_RISCV32_PULPINO
|
filter = not CONFIG_SOC_RISCV32_PULPINO
|
||||||
# TODO https://jira.zephyrproject.org/browse/ZEP-1676
|
# TODO https://jira.zephyrproject.org/browse/ZEP-1676
|
||||||
arch_exclude = xtensa
|
arch_exclude = xtensa
|
||||||
|
|
|
||||||
Loading…
Add table
Add a link
Reference in a new issue