michaelh/zephyr
1
0
Fork 0
Code Releases Activity

docs : arduino 101 doc update

Browse source 
Some remnants of earlier versions of the document are still visible in
the current version.

Change-Id: Id6d91d4e87dac641e1f1fe2c3e8200ebfb44a888
This commit is contained in:
Dan Kalowsky 2016-02-12 07:22:28 -08:00 • committed by Daniel Kalowsky
commit 5094d8b797
1 changed files with 2 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

3
doc/board/arduino_101.rst
View file

@ -115,8 +115,7 @@ Connecting JTAG to Arduino 101
#. Ensure that both the cable and header pin 0 locations line up. The cable #. Ensure that both the cable and header pin 0 locations line up. The cable
from the ARM Micro JTAG connector uses a red wire on the cable to denote from the ARM Micro JTAG connector uses a red wire on the cable to denote
which end on the cable has the pin 0. The orange arrow in the figure below which end on the cable has the pin 0.
points towards JTAG silkscreen indicator.
#. Plug the USB Type B cable into the FlySwatter2 and your computer. On #. Plug the USB Type B cable into the FlySwatter2 and your computer. On
Linux, you should see something similar to the following in your dmesg: Linux, you should see something similar to the following in your dmesg: