From 5094d8b797287b9746df3c2d21c01655aa265437 Mon Sep 17 00:00:00 2001 From: Dan Kalowsky Date: Fri, 12 Feb 2016 07:22:28 -0800 Subject: [PATCH] docs : arduino 101 doc update Some remnants of earlier versions of the document are still visible in the current version. Change-Id: Id6d91d4e87dac641e1f1fe2c3e8200ebfb44a888 --- doc/board/arduino_101.rst | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/doc/board/arduino_101.rst b/doc/board/arduino_101.rst index cf69e26f7dc..ce7784d30d0 100644 --- a/doc/board/arduino_101.rst +++ b/doc/board/arduino_101.rst @@ -115,8 +115,7 @@ Connecting JTAG to Arduino 101 #. Ensure that both the cable and header pin 0 locations line up. The cable from the ARM Micro JTAG connector uses a red wire on the cable to denote - which end on the cable has the pin 0. The orange arrow in the figure below - points towards JTAG silkscreen indicator. + which end on the cable has the pin 0. #. Plug the USB Type B cable into the FlySwatter2 and your computer. On Linux, you should see something similar to the following in your dmesg: @@ -509,4 +508,4 @@ Bibliography http://www.amazon.com/gp/product/ B009UEO9ZY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 -.. _USB to TTL Serial Cable: https://www.adafruit.com/products/954 \ No newline at end of file +.. _USB to TTL Serial Cable: https://www.adafruit.com/products/954