michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: stm32f411e_disco: Use dts for clocks configuration

Browse source 
Convert board to use of device tree for clocks configuration.

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This commit is contained in:
Alexandre Bourdiol 2021-05-04 11:03:45 +02:00 • committed by Kumar Gala
commit 45c97d3dd9
2 changed files with 23 additions and 17 deletions
Download patch file Download diff file Expand all files Collapse all files

22
boards/arm/stm32f411e_disco/stm32f411e_disco.dts
View file

@ -76,6 +76,28 @@
}; };
}; };
&clk_hse {
clock-frequency = <DT_FREQ_M(8)>;
status = "okay";
};
&pll {
div-m = <4>;
mul-n = <96>;
div-p = <2>;
div-q = <4>;
clocks = <&clk_hse>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(96)>;
ahb-prescaler = <1>;
apb1-prescaler = <2>;
apb2-prescaler = <1>;
};
&timers4 { &timers4 {
status = "okay"; status = "okay";

18
boards/arm/stm32f411e_disco/stm32f411e_disco_defconfig
View file

@ -2,8 +2,6 @@
CONFIG_SOC_SERIES_STM32F4X=y CONFIG_SOC_SERIES_STM32F4X=y
CONFIG_SOC_STM32F411XE=y CONFIG_SOC_STM32F411XE=y
# 96MHz system clock (highest value to get a precise USB clock should be 96MHz)
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=96000000
# Enable MPU # Enable MPU
CONFIG_ARM_MPU=y CONFIG_ARM_MPU=y
@ -23,19 +21,5 @@ CONFIG_PINMUX=y
# enable GPIO # enable GPIO
CONFIG_GPIO=y CONFIG_GPIO=y
# clock configuration # Enable Clocks
CONFIG_CLOCK_CONTROL=y CONFIG_CLOCK_CONTROL=y
# SYSCLK selection
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# HSE configuration
CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
# use HSE as PLL input
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
# produce 96MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=96
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=4
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=1