diff --git a/boards/arm/stm32f411e_disco/stm32f411e_disco.dts b/boards/arm/stm32f411e_disco/stm32f411e_disco.dts
index 2f5e7e7287b..3b22981c18b 100644
--- a/boards/arm/stm32f411e_disco/stm32f411e_disco.dts
+++ b/boards/arm/stm32f411e_disco/stm32f411e_disco.dts
@@ -76,6 +76,28 @@
 	};
 };
 
+&clk_hse {
+	clock-frequency = <DT_FREQ_M(8)>;
+	status = "okay";
+};
+
+&pll {
+	div-m = <4>;
+	mul-n = <96>;
+	div-p = <2>;
+	div-q = <4>;
+	clocks = <&clk_hse>;
+	status = "okay";
+};
+
+&rcc {
+	clocks = <&pll>;
+	clock-frequency = <DT_FREQ_M(96)>;
+	ahb-prescaler = <1>;
+	apb1-prescaler = <2>;
+	apb2-prescaler = <1>;
+};
+
 &timers4 {
 	status = "okay";
 
diff --git a/boards/arm/stm32f411e_disco/stm32f411e_disco_defconfig b/boards/arm/stm32f411e_disco/stm32f411e_disco_defconfig
index ec87e12466d..c3678dd5e19 100644
--- a/boards/arm/stm32f411e_disco/stm32f411e_disco_defconfig
+++ b/boards/arm/stm32f411e_disco/stm32f411e_disco_defconfig
@@ -2,8 +2,6 @@
 
 CONFIG_SOC_SERIES_STM32F4X=y
 CONFIG_SOC_STM32F411XE=y
-# 96MHz system clock (highest value to get a precise USB clock should be 96MHz)
-CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=96000000
 
 # Enable MPU
 CONFIG_ARM_MPU=y
@@ -23,19 +21,5 @@ CONFIG_PINMUX=y
 # enable GPIO
 CONFIG_GPIO=y
 
-# clock configuration
+# Enable Clocks
 CONFIG_CLOCK_CONTROL=y
-# SYSCLK selection
-CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
-# HSE configuration
-CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
-# use HSE as PLL input
-CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
-# produce 96MHz clock at PLL output
-CONFIG_CLOCK_STM32_PLL_M_DIVISOR=4
-CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=96
-CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
-CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=4
-CONFIG_CLOCK_STM32_AHB_PRESCALER=1
-CONFIG_CLOCK_STM32_APB1_PRESCALER=2
-CONFIG_CLOCK_STM32_APB2_PRESCALER=1