boards: stm32l562e_dk: add support for stm32l562e_dk
Add support for the STM32L562E-DK Discovery board (based on the nucleo_l552ze_q board). Tested with hello_world, basic/blinky, basic/button. Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
This commit is contained in:
Yestin Sun
Maureen Helm
parent
d6e718f414
commit
26a8f3765b
12 changed files with 489 additions and 0 deletions
273
boards/arm/stm32l562e_dk/doc/index.rst
Normal file
273
boards/arm/stm32l562e_dk/doc/index.rst
Normal file
|
|
@ -0,0 +1,273 @@
|
|||
.. _stm32l562e_dk_board:
|
||||
|
||||
ST STM32L562E-DK Discovery
|
||||
##########################
|
||||
|
||||
Overview
|
||||
********
|
||||
|
||||
The STM32L562E-DK Discovery kit is designed as a complete demonstration and
|
||||
development platform for STMicroelectronics Arm |reg| Cortex |reg|-M33 core-based
|
||||
STM32L562QEI6QU microcontroller with TrustZone |reg|. Here are some highlights of
|
||||
the STM32L562E-DK Discovery board:
|
||||
|
||||
|
||||
- STM32L562QEI6QU microcontroller featuring 512 Kbytes of Flash memory and 256 Kbytes of SRAM in BGA132 package
|
||||
- 1.54" 240 x 240 pixel-262K color TFT LCD module with parallel interface and touch-control panel
|
||||
- USB Type-C |trade| Sink device FS
|
||||
- On-board energy meter: 300 nA to 150 mA measurement range with a dedicated USB interface
|
||||
- SAI Audio CODEC
|
||||
- MEMS digital microphones
|
||||
- 512-Mbit Octal-SPI Flash memory
|
||||
- Bluetooth |reg| V4.1 Low Energy module
|
||||
- iNEMO 3D accelerometer and 3D gyroscope
|
||||
- Board connectors
|
||||
|
||||
- STMod+ expansion connector with fan-out expansion board for Wi‑Fi |reg|, Grove and mikroBUS |trade| compatible connectors
|
||||
- Pmod |trade| expansion connector
|
||||
- Audio MEMS daughterboard expansion connector
|
||||
- ARDUINO |reg| Uno V3 expansion connector
|
||||
|
||||
- Flexible power-supply options
|
||||
|
||||
- ST-LINK
|
||||
- USB VBUS
|
||||
- external sources
|
||||
|
||||
- On-board STLINK-V3E debugger/programmer with USB re-enumeration capability:
|
||||
|
||||
- mass storage
|
||||
- Virtual COM port
|
||||
- debug port
|
||||
|
||||
- 2 user LEDs
|
||||
- User and reset push-buttons
|
||||
|
||||
.. image:: img/stm32l562e_dk.jpg
|
||||
:width: 460px
|
||||
:align: center
|
||||
:height: 474px
|
||||
:alt: STM32L562E-DK Discovery
|
||||
|
||||
More information about the board can be found at the `STM32L562E-DK Discovery website`_.
|
||||
|
||||
Hardware
|
||||
********
|
||||
|
||||
The STM32L562xx devices are an ultra-low-power microcontrollers family (STM32L5
|
||||
Series) based on the high-performance Arm |reg| Cortex |reg|-M33 32-bit RISC core.
|
||||
They operate at a frequency of up to 110 MHz.
|
||||
|
||||
- Ultra-low-power with FlexPowerControl (down to 108 nA Standby mode and 62 uA/MHz run mode)
|
||||
- Core: ARM |reg| 32-bit Cortex |reg| -M33 CPU with TrustZone |reg| and FPU.
|
||||
- Performance benchmark:
|
||||
|
||||
- 1.5 DMPIS/MHz (Drystone 2.1)
|
||||
- 442 CoreMark |reg| (4.02 CoreMark |reg| /MHZ)
|
||||
|
||||
- Security
|
||||
|
||||
- Arm |reg| TrustZone |reg| and securable I/Os memories and peripherals
|
||||
- Flexible life cycle scheme with RDP (readout protection)
|
||||
- Root of trust thanks to unique boot entry and hide protection area (HDP)
|
||||
- Secure Firmware Installation thanks to embedded Root Secure Services
|
||||
- Secure Firmware Update support with TF-M
|
||||
- AES coprocessor
|
||||
- Public key accelerator
|
||||
- On-the-fly decryption of Octo-SPI external memories
|
||||
- HASH hardware accelerator
|
||||
- Active tamper and protection temperature, voltage and frequency attacks
|
||||
- True Random Number Generator NIST SP800-90B compliant
|
||||
- 96-bit unique ID
|
||||
- 512-byte One-Time Programmable for user data
|
||||
|
||||
- Clock management:
|
||||
|
||||
- 4 to 48 MHz crystal oscillator
|
||||
- 32 kHz crystal oscillator for RTC (LSE)
|
||||
- Internal 16 MHz factory-trimmed RC ( |plusminus| 1%)
|
||||
- Internal low-power 32 kHz RC ( |plusminus| 5%)
|
||||
- Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by
|
||||
LSE (better than |plusminus| 0.25 % accuracy)
|
||||
- 3 PLLs for system clock, USB, audio, ADC
|
||||
|
||||
- Power management
|
||||
|
||||
- Embedded regulator (LDO) with three configurable range output to supply the digital circuitry
|
||||
- Embedded SMPS step-down converter
|
||||
- External SMPS support
|
||||
|
||||
- RTC with HW calendar, alarms and calibration
|
||||
- Up to 114 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independent supply down to 1.08 V
|
||||
- Up to 22 capacitive sensing channels: support touchkey, linear and rotary touch sensors
|
||||
- Up to 16 timers and 2 watchdogs
|
||||
|
||||
- 2x 16-bit advanced motor-control
|
||||
- 2x 32-bit and 5x 16-bit general purpose
|
||||
- 2x 16-bit basic
|
||||
- 3x low-power 16-bit timers (available in Stop mode)
|
||||
- 2x watchdogs
|
||||
- 2x SysTick timer
|
||||
|
||||
- Memories
|
||||
|
||||
- Up to 512 MB Flash, 2 banks read-while-write
|
||||
- 512 KB of SRAM including 64 KB with hardware parity check
|
||||
- External memory interface for static memories supporting SRAM, PSRAM, NOR, NAND and FRAM memories
|
||||
- OCTOSPI memory interface
|
||||
|
||||
- Rich analog peripherals (independent supply)
|
||||
|
||||
- 3x 12-bit ADC 5 MSPS, up to 16-bit with hardware oversampling, 200 uA/MSPS
|
||||
- 2x 12-bit DAC, low-power sample and hold
|
||||
- 2x operational amplifiers with built-in PGA
|
||||
- 2x ultra-low-power comparators
|
||||
- 4x digital filters for sigma delta modulator
|
||||
|
||||
- 19x communication interfaces
|
||||
|
||||
- USB Type-C / USB power delivery controller
|
||||
- 2.0 full-speed crystal less solution, LPM and BCD
|
||||
- 2x SAIs (serial audio interface)
|
||||
- 4x I2C FM+(1 Mbit/s), SMBus/PMBus
|
||||
- 6x USARTs (ISO 7816, LIN, IrDA, modem)
|
||||
- 3x SPIs (7x SPIs with USART and OCTOSPI in SPI mode)
|
||||
- 1xFDCAN
|
||||
- 1xSDMMC interface
|
||||
- 2x 14 channel DMA controllers
|
||||
|
||||
- CRC calculation unit
|
||||
- Development support: serial wire debug (SWD), JTAG, Embedded Trace Macrocell |trade|
|
||||
|
||||
|
||||
More information about STM32L562QE can be found here:
|
||||
|
||||
- `STM32L562QE on www.st.com`_
|
||||
- `STM32L562 reference manual`_
|
||||
|
||||
Supported Features
|
||||
==================
|
||||
|
||||
The Zephyr stm32l562e_dk board configuration supports the following hardware features:
|
||||
|
||||
+-----------+------------+-------------------------------------+
|
||||
| Interface | Controller | Driver/Component |
|
||||
+===========+============+=====================================+
|
||||
| NVIC | on-chip | nested vector interrupt controller |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| UART | on-chip | serial port-polling; |
|
||||
| | | serial port-interrupt |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| PINMUX | on-chip | pinmux |
|
||||
+-----------+------------+-------------------------------------+
|
||||
| GPIO | on-chip | gpio |
|
||||
+-----------+------------+-------------------------------------+
|
||||
|
||||
Other hardware features are not yet supported on this Zephyr port.
|
||||
|
||||
The default configuration can be found in the defconfig file:
|
||||
``boards/arm/stm32l562e_dk/stm32l562e_dk_defconfig``
|
||||
|
||||
|
||||
Connections and IOs
|
||||
===================
|
||||
|
||||
STM32L562E-DK Discovery Board has 8 GPIO controllers. These controllers are responsible for pin muxing,
|
||||
input/output, pull-up, etc.
|
||||
|
||||
For mode details please refer to `STM32L562E-DK Discovery board User Manual`_.
|
||||
|
||||
Default Zephyr Peripheral Mapping:
|
||||
----------------------------------
|
||||
|
||||
- USART_1 TX/RX : PA9/PA10
|
||||
- USER_PB : PC13
|
||||
- LD10 : PG12
|
||||
|
||||
System Clock
|
||||
------------
|
||||
|
||||
STM32L562E-DK System Clock could be driven by internal or external oscillator,
|
||||
as well as main PLL clock. By default System clock is driven by PLL clock at
|
||||
110MHz, driven by 4MHz medium speed internal oscillator.
|
||||
|
||||
Serial Port
|
||||
-----------
|
||||
|
||||
STM32L562E-DK Discovery board has 6 U(S)ARTs. The Zephyr console output is
|
||||
assigned to USART1. Default settings are 115200 8N1.
|
||||
|
||||
|
||||
Programming and Debugging
|
||||
*************************
|
||||
|
||||
Applications for the ``stm32l562e_dk`` board configuration can be built and
|
||||
flashed in the usual way (see :ref:`build_an_application` and
|
||||
:ref:`application_run` for more details).
|
||||
|
||||
Flashing
|
||||
========
|
||||
|
||||
STM32L562E-DK Discovery board includes an ST-LINK/V3E embedded debug tool
|
||||
interface. This interface is not yet supported by the openocd version.
|
||||
Instead, support can be enabled on pyocd by adding "pack" support with
|
||||
the following pyocd command:
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
$ pyocd pack --update
|
||||
$ pyocd pack --install stm32l562qe
|
||||
|
||||
STM32L562E-DK Discovery board includes an ST-LINK/V2-1 embedded debug tool
|
||||
interface. This interface is supported by the openocd version
|
||||
included in the Zephyr SDK since v0.9.2.
|
||||
|
||||
Flashing an application to STM32L562E-DK Discovery
|
||||
--------------------------------------------------
|
||||
|
||||
Connect the STM32L562E-DK Discovery to your host computer using the USB port.
|
||||
Then build and flash an application. Here is an example for the
|
||||
:ref:`hello_world` application.
|
||||
|
||||
Run a serial host program to connect with your Nucleo board:
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
$ minicom -D /dev/ttyACM0
|
||||
|
||||
Then build and flash the application.
|
||||
|
||||
.. zephyr-app-commands::
|
||||
:zephyr-app: samples/hello_world
|
||||
:board: stm32l562e_dk
|
||||
:goals: build flash
|
||||
|
||||
You should see the following message on the console:
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
Hello World! stm32l562e_dk
|
||||
|
||||
Debugging
|
||||
=========
|
||||
|
||||
You can debug an application in the usual way. Here is an example for the
|
||||
:ref:`hello_world` application.
|
||||
|
||||
.. zephyr-app-commands::
|
||||
:zephyr-app: samples/hello_world
|
||||
:board: stm32l562e_dk
|
||||
:maybe-skip-config:
|
||||
:goals: debug
|
||||
|
||||
.. _STM32L562E-DK Discovery website:
|
||||
https://www.st.com/en/evaluation-tools/stm32l562e-dk.html
|
||||
|
||||
.. _STM32L562E-DK Discovery board User Manual:
|
||||
https://www.st.com/resource/en/user_manual/dm00635554.pdf
|
||||
|
||||
.. _STM32L562QE on www.st.com:
|
||||
https://www.st.com/en/microcontrollers/stm32l562qe.html
|
||||
|
||||
.. _STM32L562 reference manual:
|
||||
http://www.st.com/resource/en/reference_manual/DM00346336.pdf
|
||||
Loading…
Add table
Add a link
Reference in a new issue