Default branch

ch32v003 4a5ef4eb9f · drivers: spi_bitbang: improve throughput by adding a TX only special · Updated 2024-07-27 14:49:45 +02:00

ZIP  TAR.GZ

Branches

hid_set 250588ee63 · hid: change the API table to const. · Updated 2018-03-12 21:34:16 +01:00	79650 1		ZIP  TAR.GZ
trinket_dev d427b9a23d · u2f: moved the keys to storage. · Updated 2018-03-11 17:40:53 +01:00	79881 25		ZIP  TAR.GZ
crc8 88ce55a9c7 · crc: make crc8_ccitt() match the other CRC functions. · Updated 2018-03-10 22:28:56 +01:00	79672 1		ZIP  TAR.GZ
add_dma b38163f388 · boards: enable the DMA driver on the Arduino Zero. · Updated 2018-03-05 22:24:04 +01:00	79786 2		ZIP  TAR.GZ
upstream_sdhc 4f21241e95 · disk: add a SDHC card over SPI driver. · Updated 2018-03-02 20:17:09 +01:00	79814 2		ZIP  TAR.GZ
spi_dt edd22b963b · spi: sam0: use Device Tree for configuration. · Updated 2018-02-28 20:30:43 +01:00	79853 1		ZIP  TAR.GZ
upstream_usb 299f8df4ef · boards: document and enable USB on the Arduino Zero and Trinket M0. · Updated 2018-02-27 20:33:03 +01:00	79853 2		ZIP  TAR.GZ
slip_buf 42af8e3a2d · slip: fix a bug when in non-TAP mode. · Updated 2018-02-26 20:58:39 +01:00	79860 1		ZIP  TAR.GZ
fix_ecm_1 2d612a9eb5 · netusb: drop the extra byte added for multiple-of-64-byte packets. · Updated 2018-02-26 20:53:32 +01:00	79860 1		ZIP  TAR.GZ
fix_ecm_multi bbf0470327 · netusb: wait for the transfer to complete before retrying. · Updated 2018-02-25 21:26:10 +01:00	79860 1		ZIP  TAR.GZ
acm_1 92f9019f92 · cdc_acm: fix interrupt handling, API registration, and propgate errors. · Updated 2018-02-25 15:51:58 +01:00	79860 1		ZIP  TAR.GZ
pipe_cdc 1b95332678 · uart_pipe: re-work the RX function to match the API and work with USB. · Updated 2018-02-25 15:51:14 +01:00	79860 1		ZIP  TAR.GZ
fix_console_nullptr c0985fa0cd · boards/arm/nucleo_l476rg: Fix usart1 node · Updated 2018-02-24 15:10:21 +01:00	79860 0	Included	ZIP  TAR.GZ
upstream_pullup 1cd68accde · gpio: sam0: add pull up/pull down support. · Updated 2018-02-23 20:43:58 +01:00	79881 2		ZIP  TAR.GZ
upstream_trinket a4bba711af · boards: add the Adafruit Trinket M0. · Updated 2018-02-22 07:59:44 +01:00	79889 1		ZIP  TAR.GZ
dma_dts 7daca96262 · boards: enable the DMA driver on the Arduino Zero. · Updated 2018-02-21 19:56:44 +01:00	79964 3		ZIP  TAR.GZ
move_dts 3e5252967f · arch: refactor the SAM0 SoC fixups into a SoC-level file. · Updated 2018-02-21 19:28:51 +01:00	79964 1		ZIP  TAR.GZ
trinket_m0 8344419818 · samples: create a USB to serial adapter. · Updated 2018-02-19 22:20:22 +01:00	80158 12		ZIP  TAR.GZ
usb 65ee3ba2d4 · usb: sam0: add a USB device driver. · Updated 2018-02-15 14:14:38 +01:00	80075 1		ZIP  TAR.GZ
upstream_apa102 31f13bfe0a · led_strip: add a APA102 driver. · Updated 2018-02-14 22:15:22 +01:00	80082 1		ZIP  TAR.GZ