Default branch

main 9d2fe69b4e · boards: arm: sparkfun_pro_micro_rp2040: rename board directory · Updated 2023-01-13 17:46:30 +01:00

ZIP  TAR.GZ

Branches

upstream_pullup 1cd68accde · gpio: sam0: add pull up/pull down support. · Updated 2018-02-23 20:43:58 +01:00	54798 2		ZIP  TAR.GZ
dma_dts 7daca96262 · boards: enable the DMA driver on the Arduino Zero. · Updated 2018-02-21 19:56:44 +01:00	54881 3		ZIP  TAR.GZ
move_dts 3e5252967f · arch: refactor the SAM0 SoC fixups into a SoC-level file. · Updated 2018-02-21 19:28:51 +01:00	54881 1		ZIP  TAR.GZ
lsm6dsx 1cce1a4ac4 · drivers: sensor: move trigger to multi-instance · Updated 2020-07-24 20:10:15 +02:00	31416 5		ZIP  TAR.GZ
bossa 3d078f3e59 · boards: arm: configure and document the bootloader on the Trinket M0 · Updated 2020-07-12 13:20:47 +02:00	31720 3		ZIP  TAR.GZ
fix_txfirst ef91cc61a5 · drivers: spi: ensure the first byte has been loaded in the TX fast path · Updated 2020-07-03 19:37:40 +02:00	31918 1		ZIP  TAR.GZ
fix_usb cab6915328 · drivers: usb: handle a null output arg on SAM0 · Updated 2020-06-08 19:12:35 +02:00	32703 1		ZIP  TAR.GZ
fix_pages fe39fd8939 · fs: nvs: fail on >= 256 B block sizes · Updated 2020-06-08 18:27:09 +02:00	32703 1		ZIP  TAR.GZ
softspi fe4e463333 · dns: add a soft SPI driver · Updated 2020-05-29 17:26:16 +02:00	32849 4		ZIP  TAR.GZ
uart_pinmux dca17f66ec · sam0: move the UART configuration into pinmux. · Updated 2018-01-30 21:37:10 +01:00	55392 3		ZIP  TAR.GZ
nosem e259308c6e · drivers/flash: sam0: only use a semaphore if multitasking is enabled · Updated 2021-06-25 20:27:59 +02:00	20521 1		ZIP  TAR.GZ
slip_buf 42af8e3a2d · slip: fix a bug when in non-TAP mode. · Updated 2018-02-26 20:58:39 +01:00	54777 1		ZIP  TAR.GZ
fix_console_nullptr c0985fa0cd · boards/arm/nucleo_l476rg: Fix usart1 node · Updated 2018-02-24 15:10:21 +01:00	54777 0	Included	ZIP  TAR.GZ
add_dac 533d2bc434 · boards: arm: document and enable the DAC for the Arduino Zero · Updated 2020-07-24 20:10:19 +02:00	31416 4		ZIP  TAR.GZ
nano 3903b12fc1 · boards: arm: add the Arduino Nano 33 IOT · Updated 2020-07-12 13:21:24 +02:00	31720 1		ZIP  TAR.GZ
entropy 0f25afcab0 · board: arm: enable the entropy driver for the adafruit_itsybitsy_m4_express · Updated 2020-05-28 19:43:22 +02:00	32849 4		ZIP  TAR.GZ
trinket_m0 8344419818 · samples: create a USB to serial adapter. · Updated 2018-02-19 22:20:22 +01:00	55075 12		ZIP  TAR.GZ
bytewise_crc16 52cb31cd69 · crc: add crc16_itu_t which is used in the MMC protocol. · Updated 2018-02-01 21:39:38 +01:00	55392 3		ZIP  TAR.GZ
add_pinmux 5f644eed56 · pinmux: sam0: add a pinmux driver for the SAM0 series. · Updated 2018-01-31 19:30:59 +01:00	55392 2		ZIP  TAR.GZ
zero_pinmux 98e2efdd05 · sam0: move the UART and SPI configuration into pinmux. · Updated 2018-02-06 20:46:27 +01:00	55211 1		ZIP  TAR.GZ