unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
/*
|
2017-02-11 10:50:27 -05:00
|
|
|
* Copyright (c) 2016-2017 Wind River Systems, Inc.
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
*
|
2017-01-18 17:01:01 -08:00
|
|
|
* SPDX-License-Identifier: Apache-2.0
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
*/
|
|
|
|
|
2018-09-13 15:06:35 -07:00
|
|
|
#ifndef ZEPHYR_KERNEL_INCLUDE_KSCHED_H_
|
|
|
|
#define ZEPHYR_KERNEL_INCLUDE_KSCHED_H_
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
|
2016-11-08 10:36:50 -05:00
|
|
|
#include <kernel_structs.h>
|
2019-01-02 08:29:43 -06:00
|
|
|
#include <timeout_q.h>
|
2019-06-25 12:25:12 -04:00
|
|
|
#include <debug/tracing.h>
|
2018-09-18 12:32:27 -07:00
|
|
|
#include <stdbool.h>
|
2017-03-08 17:13:24 -08:00
|
|
|
|
2019-03-22 09:10:38 -07:00
|
|
|
BUILD_ASSERT(K_LOWEST_APPLICATION_THREAD_PRIO
|
|
|
|
>= K_HIGHEST_APPLICATION_THREAD_PRIO);
|
|
|
|
|
2018-04-11 14:52:47 -07:00
|
|
|
#ifdef CONFIG_MULTITHREADING
|
2019-03-22 09:10:38 -07:00
|
|
|
#define Z_VALID_PRIO(prio, entry_point) \
|
2019-03-08 14:19:05 -07:00
|
|
|
(((prio) == K_IDLE_PRIO && z_is_idle_thread(entry_point)) || \
|
2019-03-22 09:10:38 -07:00
|
|
|
((K_LOWEST_APPLICATION_THREAD_PRIO \
|
|
|
|
>= K_HIGHEST_APPLICATION_THREAD_PRIO) \
|
|
|
|
&& (prio) >= K_HIGHEST_APPLICATION_THREAD_PRIO \
|
|
|
|
&& (prio) <= K_LOWEST_APPLICATION_THREAD_PRIO))
|
2018-01-29 14:55:20 -08:00
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
#define Z_ASSERT_VALID_PRIO(prio, entry_point) do { \
|
|
|
|
__ASSERT(Z_VALID_PRIO((prio), (entry_point)), \
|
2018-04-11 14:52:47 -07:00
|
|
|
"invalid priority (%d); allowed range: %d to %d", \
|
|
|
|
(prio), \
|
|
|
|
K_LOWEST_APPLICATION_THREAD_PRIO, \
|
|
|
|
K_HIGHEST_APPLICATION_THREAD_PRIO); \
|
2018-09-18 12:32:27 -07:00
|
|
|
} while (false)
|
2018-04-11 14:52:47 -07:00
|
|
|
#else
|
2019-03-08 14:19:05 -07:00
|
|
|
#define Z_VALID_PRIO(prio, entry_point) ((prio) == -1)
|
|
|
|
#define Z_ASSERT_VALID_PRIO(prio, entry_point) __ASSERT((prio) == -1, "")
|
2018-01-29 14:55:20 -08:00
|
|
|
#endif
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
void z_sched_init(void);
|
|
|
|
void z_add_thread_to_ready_q(struct k_thread *thread);
|
|
|
|
void z_move_thread_to_end_of_prio_q(struct k_thread *thread);
|
|
|
|
void z_remove_thread_from_ready_q(struct k_thread *thread);
|
|
|
|
int z_is_thread_time_slicing(struct k_thread *thread);
|
|
|
|
void z_unpend_thread_no_timeout(struct k_thread *thread);
|
|
|
|
int z_pend_curr(struct k_spinlock *lock, k_spinlock_key_t key,
|
2018-07-24 13:37:59 -07:00
|
|
|
_wait_q_t *wait_q, s32_t timeout);
|
2019-03-08 14:19:05 -07:00
|
|
|
int z_pend_curr_irqlock(u32_t key, _wait_q_t *wait_q, s32_t timeout);
|
|
|
|
void z_pend_thread(struct k_thread *thread, _wait_q_t *wait_q, s32_t timeout);
|
|
|
|
void z_reschedule(struct k_spinlock *lock, k_spinlock_key_t key);
|
|
|
|
void z_reschedule_irqlock(u32_t key);
|
|
|
|
struct k_thread *z_unpend_first_thread(_wait_q_t *wait_q);
|
|
|
|
void z_unpend_thread(struct k_thread *thread);
|
|
|
|
int z_unpend_all(_wait_q_t *wait_q);
|
|
|
|
void z_thread_priority_set(struct k_thread *thread, int prio);
|
2019-08-20 11:21:28 -07:00
|
|
|
bool z_set_prio(struct k_thread *thread, int prio);
|
2019-03-08 14:19:05 -07:00
|
|
|
void *z_get_next_switch_handle(void *interrupted);
|
|
|
|
struct k_thread *z_find_first_thread_to_unpend(_wait_q_t *wait_q,
|
2018-04-11 14:52:47 -07:00
|
|
|
struct k_thread *from);
|
|
|
|
void idle(void *a, void *b, void *c);
|
2018-09-25 10:56:09 -07:00
|
|
|
void z_time_slice(int ticks);
|
2019-08-16 21:29:26 -07:00
|
|
|
void z_reset_time_slice(void);
|
2019-02-19 16:03:39 -08:00
|
|
|
void z_sched_abort(struct k_thread *thread);
|
|
|
|
void z_sched_ipi(void);
|
2016-11-08 15:44:05 -05:00
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_pend_curr_unlocked(_wait_q_t *wait_q, s32_t timeout)
|
2018-07-24 14:39:38 -07:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
(void) z_pend_curr_irqlock(z_arch_irq_lock(), wait_q, timeout);
|
2018-07-24 14:39:38 -07:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_reschedule_unlocked(void)
|
2018-07-24 14:39:38 -07:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
(void) z_reschedule_irqlock(z_arch_irq_lock());
|
2018-07-24 14:39:38 -07:00
|
|
|
}
|
|
|
|
|
kernel/arch: enhance the "ready thread" cache
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-12-02 10:37:27 -05:00
|
|
|
/* find which one is the next thread to run */
|
|
|
|
/* must be called with interrupts locked */
|
2018-01-29 14:55:20 -08:00
|
|
|
#ifdef CONFIG_SMP
|
2019-03-08 14:19:05 -07:00
|
|
|
extern struct k_thread *z_get_next_ready_thread(void);
|
2018-01-29 14:55:20 -08:00
|
|
|
#else
|
2019-03-08 14:19:05 -07:00
|
|
|
static ALWAYS_INLINE struct k_thread *z_get_next_ready_thread(void)
|
kernel/arch: enhance the "ready thread" cache
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-12-02 10:37:27 -05:00
|
|
|
{
|
2018-10-24 12:47:18 -07:00
|
|
|
return _kernel.ready_q.cache;
|
kernel/arch: enhance the "ready thread" cache
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-12-02 10:37:27 -05:00
|
|
|
}
|
2018-01-29 14:55:20 -08:00
|
|
|
#endif
|
kernel/arch: enhance the "ready thread" cache
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-12-02 10:37:27 -05:00
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_idle_thread(void *entry_point)
|
2016-11-08 15:44:05 -05:00
|
|
|
{
|
|
|
|
return entry_point == idle;
|
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_thread_pending(struct k_thread *thread)
|
2018-02-16 17:05:08 -08:00
|
|
|
{
|
2019-03-28 14:57:54 -06:00
|
|
|
return (thread->base.thread_state & _THREAD_PENDING) != 0U;
|
2018-02-16 17:05:08 -08:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:53:42 -08:00
|
|
|
static inline bool z_is_thread_prevented_from_running(struct k_thread *thread)
|
2018-02-16 17:05:08 -08:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
u8_t state = thread->base.thread_state;
|
2018-02-16 17:05:08 -08:00
|
|
|
|
2019-03-08 14:53:42 -08:00
|
|
|
return (state & (_THREAD_PENDING | _THREAD_PRESTART | _THREAD_DEAD |
|
2019-03-26 19:57:45 -06:00
|
|
|
_THREAD_DUMMY | _THREAD_SUSPENDED)) != 0U;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
|
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_thread_timeout_active(struct k_thread *thread)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
return !z_is_inactive_timeout(&thread->base.timeout);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_thread_ready(struct k_thread *thread)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
return !((z_is_thread_prevented_from_running(thread)) != 0 ||
|
|
|
|
z_is_thread_timeout_active(thread));
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_has_thread_started(struct k_thread *thread)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-26 19:57:45 -06:00
|
|
|
return (thread->base.thread_state & _THREAD_PRESTART) == 0U;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_thread_state_set(struct k_thread *thread, u32_t state)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-28 14:57:54 -06:00
|
|
|
return (thread->base.thread_state & state) != 0U;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_thread_queued(struct k_thread *thread)
|
2018-05-03 14:51:49 -07:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
return z_is_thread_state_set(thread, _THREAD_QUEUED);
|
2018-05-03 14:51:49 -07:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_mark_thread_as_suspended(struct k_thread *thread)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
thread->base.thread_state |= _THREAD_SUSPENDED;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_mark_thread_as_not_suspended(struct k_thread *thread)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
thread->base.thread_state &= ~_THREAD_SUSPENDED;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_mark_thread_as_started(struct k_thread *thread)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
thread->base.thread_state &= ~_THREAD_PRESTART;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_mark_thread_as_pending(struct k_thread *thread)
|
2018-05-03 14:51:49 -07:00
|
|
|
{
|
|
|
|
thread->base.thread_state |= _THREAD_PENDING;
|
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_mark_thread_as_not_pending(struct k_thread *thread)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
thread->base.thread_state &= ~_THREAD_PENDING;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_set_thread_states(struct k_thread *thread, u32_t states)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2016-12-21 15:38:54 -05:00
|
|
|
thread->base.thread_state |= states;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_reset_thread_states(struct k_thread *thread,
|
2017-04-21 10:55:34 -05:00
|
|
|
u32_t states)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2016-12-21 15:38:54 -05:00
|
|
|
thread->base.thread_state &= ~states;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_mark_thread_as_queued(struct k_thread *thread)
|
2018-05-03 14:51:49 -07:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
z_set_thread_states(thread, _THREAD_QUEUED);
|
2018-05-03 14:51:49 -07:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_mark_thread_as_not_queued(struct k_thread *thread)
|
2018-05-03 14:51:49 -07:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
z_reset_thread_states(thread, _THREAD_QUEUED);
|
2018-05-03 14:51:49 -07:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_under_prio_ceiling(int prio)
|
2016-12-07 22:39:31 -05:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
return prio >= CONFIG_PRIORITY_CEILING;
|
2016-12-07 22:39:31 -05:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline int z_get_new_prio_with_ceiling(int prio)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
return z_is_under_prio_ceiling(prio) ? prio : CONFIG_PRIORITY_CEILING;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_prio1_higher_than_or_equal_to_prio2(int prio1, int prio2)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
return prio1 <= prio2;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_prio_higher_or_equal(int prio1, int prio2)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
return z_is_prio1_higher_than_or_equal_to_prio2(prio1, prio2);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_prio1_lower_than_or_equal_to_prio2(int prio1, int prio2)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
return prio1 >= prio2;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_prio1_higher_than_prio2(int prio1, int prio2)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
return prio1 < prio2;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_prio_higher(int prio, int test_prio)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
return z_is_prio1_higher_than_prio2(prio, test_prio);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline bool z_is_prio_lower_or_equal(int prio1, int prio2)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
return z_is_prio1_lower_than_or_equal_to_prio2(prio1, prio2);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
bool z_is_t1_higher_prio_than_t2(struct k_thread *t1, struct k_thread *t2);
|
2017-02-12 09:37:08 -05:00
|
|
|
|
2018-09-20 15:43:57 -07:00
|
|
|
static inline bool _is_valid_prio(int prio, void *entry_point)
|
2017-01-28 11:54:48 -05:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
if (prio == K_IDLE_PRIO && z_is_idle_thread(entry_point)) {
|
2018-09-20 15:43:57 -07:00
|
|
|
return true;
|
2018-04-11 14:52:47 -07:00
|
|
|
}
|
2017-01-28 11:54:48 -05:00
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
if (!z_is_prio_higher_or_equal(prio,
|
|
|
|
K_LOWEST_APPLICATION_THREAD_PRIO)) {
|
2018-09-20 15:43:57 -07:00
|
|
|
return false;
|
2018-04-11 14:52:47 -07:00
|
|
|
}
|
2017-01-28 11:54:48 -05:00
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
if (!z_is_prio_lower_or_equal(prio,
|
|
|
|
K_HIGHEST_APPLICATION_THREAD_PRIO)) {
|
2018-09-20 15:43:57 -07:00
|
|
|
return false;
|
2018-04-11 14:52:47 -07:00
|
|
|
}
|
2017-01-28 11:54:48 -05:00
|
|
|
|
2018-09-20 15:43:57 -07:00
|
|
|
return true;
|
2016-11-23 22:15:44 -05:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static ALWAYS_INLINE void z_ready_thread(struct k_thread *thread)
|
2018-08-27 16:26:36 -05:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
if (z_is_thread_ready(thread)) {
|
|
|
|
z_add_thread_to_ready_q(thread);
|
2018-08-27 16:26:36 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
sys_trace_thread_ready(thread);
|
|
|
|
}
|
|
|
|
|
2018-04-11 14:52:47 -07:00
|
|
|
static inline void _ready_one_thread(_wait_q_t *wq)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
struct k_thread *th = z_unpend_first_thread(wq);
|
2018-04-11 14:52:47 -07:00
|
|
|
|
2018-09-20 16:30:45 -07:00
|
|
|
if (th != NULL) {
|
2019-03-08 14:19:05 -07:00
|
|
|
z_ready_thread(th);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline void z_sched_lock(void)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
#ifdef CONFIG_PREEMPT_ENABLED
|
2019-09-21 15:58:15 -07:00
|
|
|
__ASSERT(!z_arch_is_in_isr(), "");
|
2018-04-11 14:52:47 -07:00
|
|
|
__ASSERT(_current->base.sched_locked != 1, "");
|
|
|
|
|
|
|
|
--_current->base.sched_locked;
|
|
|
|
|
|
|
|
compiler_barrier();
|
|
|
|
|
|
|
|
K_DEBUG("scheduler locked (%p:%d)\n",
|
|
|
|
_current, _current->base.sched_locked);
|
|
|
|
#endif
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static ALWAYS_INLINE void z_sched_unlock_no_reschedule(void)
|
2016-12-07 22:39:31 -05:00
|
|
|
{
|
2018-04-11 14:52:47 -07:00
|
|
|
#ifdef CONFIG_PREEMPT_ENABLED
|
2019-09-21 15:58:15 -07:00
|
|
|
__ASSERT(!z_arch_is_in_isr(), "");
|
2018-04-11 14:52:47 -07:00
|
|
|
__ASSERT(_current->base.sched_locked != 0, "");
|
2016-12-07 22:39:31 -05:00
|
|
|
|
2018-04-11 14:52:47 -07:00
|
|
|
compiler_barrier();
|
2016-12-07 22:39:31 -05:00
|
|
|
|
2018-04-11 14:52:47 -07:00
|
|
|
++_current->base.sched_locked;
|
|
|
|
#endif
|
|
|
|
}
|
2016-12-07 22:39:31 -05:00
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static ALWAYS_INLINE bool z_is_thread_timeout_expired(struct k_thread *thread)
|
2018-04-11 14:52:47 -07:00
|
|
|
{
|
|
|
|
#ifdef CONFIG_SYS_CLOCK_EXISTS
|
2018-09-27 16:50:00 -07:00
|
|
|
return thread->base.timeout.dticks == _EXPIRED;
|
2017-02-12 09:41:29 -05:00
|
|
|
#else
|
2018-04-11 14:52:47 -07:00
|
|
|
return 0;
|
2016-12-07 22:39:31 -05:00
|
|
|
#endif
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-02 18:55:39 -04:00
|
|
|
}
|
|
|
|
|
2019-03-08 14:19:05 -07:00
|
|
|
static inline struct k_thread *z_unpend1_no_timeout(_wait_q_t *wait_q)
|
2017-02-12 09:41:29 -05:00
|
|
|
{
|
2019-03-08 14:19:05 -07:00
|
|
|
struct k_thread *thread = z_find_first_thread_to_unpend(wait_q, NULL);
|
2017-02-12 09:41:29 -05:00
|
|
|
|
2018-09-20 16:30:45 -07:00
|
|
|
if (thread != NULL) {
|
2019-03-08 14:19:05 -07:00
|
|
|
z_unpend_thread_no_timeout(thread);
|
2017-02-12 09:41:29 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
return thread;
|
|
|
|
}
|
|
|
|
|
2018-09-13 15:06:35 -07:00
|
|
|
#endif /* ZEPHYR_KERNEL_INCLUDE_KSCHED_H_ */
|