michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/samples/drivers/adc/sample.yaml

21 lines
669 B
YAML
Raw Normal View History

samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
sample:
name: ADC driver sample
tests:
sample.drivers.adc:
tags: ADC
depends_on: adc
boards: arm: stm32h735g_disco: Enable ADC support Enable ADC support for the stm32h735g_disco board in devicetree Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
2023-02-06 12:14:58 +00:00
platform_allow: nucleo_l073rz disco_l475_iot1 cc3220sf_launchxl cc3235sf_launchxl
stm32l496g_disco stm32h735g_disco nrf51dk_nrf51422 nrf52840dk_nrf52840
samples: drivers: adc: add gd32 boards support This add gd32 boards support for the adc sample. Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
2022-03-16 13:51:40 +08:00
mec172xevb_assy6906 gd32f350r_eval gd32f450i_eval gd32vf103v_eval gd32f403z_eval
boards: lpcxpresso55s36: Enable LPADC Enable LPADC on lpcxpresso55s36 board Support lpcxpresso55s36 on ADC driver sample Signed-off-by: David Leach <david.leach@nxp.com>
2023-04-12 16:16:01 +00:00
esp32 esp32s2_saola esp32c3_devkitm gd32l233r_eval lpcxpresso55s36
samples/drivers/adc: Add support for nRF52840 DK and nRF51 DK boards The overlay for the nRF52840 DK board uses ADC controller child nodes for specifying channel configurations and it shows how to configure a channel in differential input mode, so it can serve as an example of how to use these new possibilities. The overlay for the nRF51 DK board shows how to use a specific ADC resolution (the default 12 bit setting is not supported by nRF51 SoCs). Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-02-21 17:29:46 +01:00
integration_platforms:
- nucleo_l073rz
- nrf52840dk_nrf52840
samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
harness: console
samples/drivers/adc: Few fixes for use with twister Add some changes to adc sample to enable valid verdict generation using twister: -Replace 'single_line' keyword with correct 'one_line' -Remove parenthesis from the sample output to enable regex verdict -Add timeout to save time in execution Additionally, add support for disco_l475_iot1. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2021-01-29 14:10:09 +01:00
timeout: 10
samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
harness_config:
samples/drivers/adc: Rework to use channel configurations from DT Allow specifying configuration of channels through child nodes of ADC controllers. This way analog inputs can be specified for channels in SoCs that require this and it is also possible, for example, to use different gain or reference selections for particular channels. This commit also removes a few former limitations of the sample: now it is possible to use more than 2 channels and each channel can use a different ADC controller. Also the ADC resolution to be used can be specified through devicetree. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-02-21 16:10:03 +01:00
type: multi_line
samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
regex:
adc: harness regex string not capturing sample app NTC thermistor changes updated the sample app output, correcting harness string to match sample app. Signed-off-by: Al Semjonovs <asemjonovs@google.com>
2023-04-18 09:17:25 -06:00
- "ADC reading\\[\\d+\\]"
samples/drivers/adc: Fix output specification This is a follow-up to commit f5ffd05e6b3f5e7e64ba59d0dbe0380bedede345. Since twister removes leading spaces from received lines before further processing, the regular expression for checking the output produced by the sample cannot contain such space. Also negative values read from ADC channels need to be allowed. For consistency, remove the leading space also in the actual string printed by the sample. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-06-02 09:43:06 +02:00
- "- .+, channel \\d+: -?\\d+"
Copy permalink