michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/samples/drivers/adc/sample.yaml

20 lines
507 B
YAML
Raw Normal View History

samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
sample:
name: ADC driver sample
tests:
sample.drivers.adc:
tags: ADC
depends_on: adc
samples: adc: add cc32xxsf_launchxl support Add support for cc3220sf_launchxl, cc3235sf_launchxl boards Signed-off-by: Pavlo Hamov <pasha.gamov@gmail.com>
2021-02-17 22:33:37 +02:00
platform_allow: nucleo_l073rz disco_l475_iot1 cc3220sf_launchxl
samples/drivers/adc: Add support for nRF52840 DK and nRF51 DK boards The overlay for the nRF52840 DK board uses ADC controller child nodes for specifying channel configurations and it shows how to configure a channel in differential input mode, so it can serve as an example of how to use these new possibilities. The overlay for the nRF51 DK board shows how to use a specific ADC resolution (the default 12 bit setting is not supported by nRF51 SoCs). Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-02-21 17:29:46 +01:00
cc3235sf_launchxl stm32l496g_disco nrf51dk_nrf51422 nrf52840dk_nrf52840
samples: drivers: adc: Enable test for mec172xevb_assy6906 Add overlay for mec172xevb_assy6906 board to enable 4 channels. Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
2022-05-13 16:44:29 -07:00
mec172xevb_assy6906
samples/drivers/adc: Add support for nRF52840 DK and nRF51 DK boards The overlay for the nRF52840 DK board uses ADC controller child nodes for specifying channel configurations and it shows how to configure a channel in differential input mode, so it can serve as an example of how to use these new possibilities. The overlay for the nRF51 DK board shows how to use a specific ADC resolution (the default 12 bit setting is not supported by nRF51 SoCs). Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-02-21 17:29:46 +01:00
integration_platforms:
- nucleo_l073rz
- nrf52840dk_nrf52840
samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
harness: console
samples/drivers/adc: Few fixes for use with twister Add some changes to adc sample to enable valid verdict generation using twister: -Replace 'single_line' keyword with correct 'one_line' -Remove parenthesis from the sample output to enable regex verdict -Add timeout to save time in execution Additionally, add support for disco_l475_iot1. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2021-01-29 14:10:09 +01:00
timeout: 10
samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
harness_config:
samples/drivers/adc: Rework to use channel configurations from DT Allow specifying configuration of channels through child nodes of ADC controllers. This way analog inputs can be specified for channels in SoCs that require this and it is also possible, for example, to use different gain or reference selections for particular channels. This commit also removes a few former limitations of the sample: now it is possible to use more than 2 channels and each channel can use a different ADC controller. Also the ADC resolution to be used can be specified through devicetree. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-02-21 16:10:03 +01:00
type: multi_line
samples: drivers: adc: add ADC example This sample shows how to use the ADC API. Depending on the support of sequential reads in the driver, 1 or 2 channels are read and printed. A devicetree overlay is necessary to specify the used ADC channel(s). Signed-off-by: Martin Jäger <martin@libre.solar>
2020-05-10 10:38:18 +02:00
regex:
samples/drivers/adc: Rework to use channel configurations from DT Allow specifying configuration of channels through child nodes of ADC controllers. This way analog inputs can be specified for channels in SoCs that require this and it is also possible, for example, to use different gain or reference selections for particular channels. This commit also removes a few former limitations of the sample: now it is possible to use more than 2 channels and each channel can use a different ADC controller. Also the ADC resolution to be used can be specified through devicetree. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-02-21 16:10:03 +01:00
- "ADC reading:"
samples/drivers/adc: Fix output specification This is a follow-up to commit f5ffd05e6b3f5e7e64ba59d0dbe0380bedede345. Since twister removes leading spaces from received lines before further processing, the regular expression for checking the output produced by the sample cannot contain such space. Also negative values read from ADC channels need to be allowed. For consistency, remove the leading space also in the actual string printed by the sample. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2022-06-02 09:43:06 +02:00
- "- .+, channel \\d+: -?\\d+"
Copy permalink