michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/drivers/sensor/Kconfig

163 lines
3.2 KiB
Text
Raw Normal View History

kconfig: Clean up header comments and make them consistent Use this short header style in all Kconfig files: # <description> # <copyright> # <license> ... Also change all <description>s from # Kconfig[.extension] - Foo-related options to just # Foo-related options It's clear enough that it's about Kconfig. The <description> cleanup was done with this command, along with some manual cleanup (big letter at the start, etc.) git ls-files '*Kconfig*' | \ xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /' Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-01 13:45:29 +01:00
# Sensor configuration options
Add infrastructure for sensor drivers Origin: Original Change-Id: I846b1601f1bdf15ad068b27baefc4b23ffab81e3 Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
2016-01-25 18:21:51 +02:00
# Copyright (c) 2016 Intel Corporation
license: Replace Apache boilerplate with SPDX tag Replace the existing Apache 2.0 boilerplate header with an SPDX tag throughout the zephyr code tree. This patch was generated via a script run over the master branch. Also updated doc/porting/application.rst that had a dependency on line numbers in a literal include. Manually updated subsys/logging/sys_log.c that had a malformed header in the original file. Also cleanup several cases that already had a SPDX tag and we either got a duplicate or missed updating. Jira: ZEP-1457 Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-18 17:01:01 -08:00
# SPDX-License-Identifier: Apache-2.0
Add infrastructure for sensor drivers Origin: Original Change-Id: I846b1601f1bdf15ad068b27baefc4b23ffab81e3 Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
2016-01-25 18:21:51 +02:00
menuconfig SENSOR
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 16:19:20 +02:00
bool "Sensor Drivers"
Add infrastructure for sensor drivers Origin: Original Change-Id: I846b1601f1bdf15ad068b27baefc4b23ffab81e3 Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
2016-01-25 18:21:51 +02:00
help
Include sensor drivers in system config
drivers: sensor: clean up Kconfig files - place all sensor Kconfig options in submenu - separate device drivers and common options with a comment line - align help text Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-09-21 20:28:16 +02:00
if SENSOR
drivers: sensor: Migrate to new logger Move all sensor drivers and samples to new logging system. Signed-off-by: Punit Vara <punit.vara@intel.com>
2018-10-10 12:08:54 +05:30
module = SENSOR
module-str = sensor
source "subsys/logging/Kconfig.template.log_config"
sensors: use one single sys log config for sensors Change-Id: I27aadd15ad0ebbaf6373591d52e63fe3f4560378 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-05 12:49:41 -04:00
sensors: use one init priority config for all sensors Sensors are end-devices and usually nothing depends on them, so set a global priority for all sensors and use it instead of individual values per sensor. Change-Id: I5847411e783ef8a8517f0ab1d8234810513707b4 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-04 09:01:27 -04:00
config SENSOR_INIT_PRIORITY
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 16:19:20 +02:00
int "Sensor init priority"
sensors: use one init priority config for all sensors Sensors are end-devices and usually nothing depends on them, so set a global priority for all sensors and use it instead of individual values per sensor. Change-Id: I5847411e783ef8a8517f0ab1d8234810513707b4 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-04 09:01:27 -04:00
default 90
help
drivers: sensor: clean up Kconfig files - place all sensor Kconfig options in submenu - separate device drivers and common options with a comment line - align help text Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-09-21 20:28:16 +02:00
Sensor initialization priority.
subsys/shell: Introduce the Sensor Shell Module Adds a Shell Module for retrieving Sensor data. The following commands were added: sensor - Device commands Options: -h, --help :Show command help. Subcommands: get :<device_name> [chanel_idx] list :List configured sensors list_channels :<device_name> Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-12-07 09:31:34 +00:00
config SENSOR_SHELL
bool "Enable sensor shell"
drivers: sensor: shell: Improved shell support for sensors Added autocompletion to 'sensor get' command. After this change device and channels are autocompleted. It is possible to provide multiple channels for reading. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2020-01-03 11:16:30 +01:00
depends on SHELL
default y
subsys/shell: Introduce the Sensor Shell Module Adds a Shell Module for retrieving Sensor data. The following commands were added: sensor - Device commands Options: -h, --help :Show command help. Subcommands: get :<device_name> [chanel_idx] list :List configured sensors list_channels :<device_name> Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-12-07 09:31:34 +00:00
help
This shell provides access to basic sensor data.
drivers: sensor: clean up Kconfig files - place all sensor Kconfig options in submenu - separate device drivers and common options with a comment line - align help text Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-09-21 20:28:16 +02:00
comment "Device Drivers"
sensors: use one init priority config for all sensors Sensors are end-devices and usually nothing depends on them, so set a global priority for all sensors and use it instead of individual values per sensor. Change-Id: I5847411e783ef8a8517f0ab1d8234810513707b4 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-04 09:01:27 -04:00
drivers: sensors: adt7420: Add driver for ADT7420 Temperature Sensor This patch adds support for the Analog Devices ADT7420 High-Accuracy 16-bit Digital I2C Temperature Sensors. Optionally sensor threshold events are supported. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2018-07-09 17:48:09 +02:00
source "drivers/sensor/adt7420/Kconfig"
Sensor: ADXL345: Add ADXL345 driver Add support for Analog Devices ADXL345 3-axis I2C accelerometer. Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
2020-03-13 11:32:14 +01:00
source "drivers/sensor/adxl345/Kconfig"
Added sensor driver for ADXL362 The ADXL362 is a 3-axis MEMS accelerometer. See http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL362.pdf Jira: ZEP-1695 Change-Id: I29d870b59e62412452494cf0bc06eac632bebba5 Signed-off-by: Dario Pennisi <dario@iptronix.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-02-03 14:29:11 +01:00
source "drivers/sensor/adxl362/Kconfig"
drivers: sensors: adxl372: Add driver for ADXL372 high-g accelerometer This patch adds support for the Analog Devices ADXL372 ultra-low power, 3-axis, +/-200 g MEMS accelerometer. The ADXL372 can be either connected via a SPI or I2C interface. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2018-08-01 10:45:59 +02:00
source "drivers/sensor/adxl372/Kconfig"
sensors: ak8975: move ak8975 to own directory under drivers/sensor/ Change-Id: Ib3a8e8a74430d30843db77954737c3ce5dfdce14 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:50 -04:00
source "drivers/sensor/ak8975/Kconfig"
sensor: add driver for AK8975 magnetometer Add driver for the AK8975 3-axis electonic compass. Datasheet: http://www.akm.com/akm/en/file/datasheet/AK8975.pdf Change-Id: I427f954396c8991a153e4447d746b855d19cb60d Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-27 11:33:29 +03:00
drivers: sensors: add driver for amg88xx sensor This patch adds the driver for Panasonic AMG88xx infrared array sensor. The driver was developed within the framework of a student internship in the development department. The task of the student was to implement the trigger part of the driver, transfer and visualization of the measured data. Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2017-09-25 17:38:33 +02:00
source "drivers/sensor/amg88xx/Kconfig"
drivers: sensor: ams_iAQcore: Implemented ASM Indoor Air Quality Sensor Implementation of AMS (Austria Micro Systems) Indoor Air Quality Sensor Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2018-10-05 16:32:41 +02:00
source "drivers/sensor/ams_iAQcore/Kconfig"
drivers: Add apds9960 sensor in polling mode This patch implements following functionality in polling mode. Ambient light RGB light proximity sensor Following datasheet has been used to develop driver https://docs.broadcom.com/docs/AV02-4191EN Jira: ZEP-1552 Signed-off-by: Punit Vara <punit.vara@intel.com>
2017-06-12 11:25:00 +05:30
source "drivers/sensor/apds9960/Kconfig"
sensors: bma280: move bma280 to own directory under drivers/sensor/ Change-Id: I1c73d36a51ea88fbda3707c7d6630d54f8fd3545 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:51 -04:00
source "drivers/sensor/bma280/Kconfig"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 17:40:55 +02:00
sensors: bmc150_magn: move bmc150_magn to own directory under drivers/sensor/ Change-Id: I725438747b3208ebd49f4f7d9ef6277721eaa48f Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:51 -04:00
source "drivers/sensor/bmc150_magn/Kconfig"
sensor: add driver for LSM9DS0 gyroscope Add device driver for the gyroscope part of LSM9DS0 gyroscope. Datasheet: https://www.adafruit.com/datasheets/LSM9DS0.pdf Change-Id: I25e0c8470c9b68c594bc4a0d2a9a13f8f41ee309 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-02-29 15:12:20 +02:00
sensors: bme280: move bme280 to own directory under drivers/sensor/ Change-Id: I53f5504773c914b0936091c459b80ab133b9e4ac Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:52 -04:00
source "drivers/sensor/bme280/Kconfig"
sensor: add support for BME280 * Rename BMP280 to BME280 which is a superset for the former. * Autodetect device based on chip ID. * Implement humidity fetching and reading for BME280 * Rename sample BMP280 to BME280 Change-Id: I565c769a7011e7496c9f1cad861d5ee311839b4f Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-05-10 15:30:06 +03:00
driver: sensor: bme680 added support Added support for the BME680 environmental sensor Signed-off-by: Bosch Sensortec <github@bosch-sensortec.com>
2018-09-05 12:18:15 +02:00
source "drivers/sensor/bme680/Kconfig"
sensors: bmg160: move bmg160 to own directory under drivers/sensor/ Change-Id: Ifae44714f08537835c8466fba11b6853f258f148 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:52 -04:00
source "drivers/sensor/bmg160/Kconfig"
sensor: add support for BMG160 gyroscope Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMG160-DS000-09.pdf Origin: Original Change-Id: I27469da8ff04c2eb26e92cc5d747b1bb8fee627b Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2016-04-27 17:34:33 +03:00
sensors: bmi160: move bmi160 to own directory under drivers/sensor/ Change-Id: I14bfabf77b7aa64acbf25a922a94f92c559b13f7 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:53 -04:00
source "drivers/sensor/bmi160/Kconfig"
sensor: add driver for BMI160 This patch adds support for the Curie's BMI160 IMU chip. Only polling is supported in this version. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMI160-DS000-07.pdf Origin: Original Change-Id: I759856d4bf123c21e9e4928f32bdf8f00aeeed24 Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2016-03-31 15:05:03 +03:00
driver: sensor: Add BMM150 Geomagnetic sensor driver This patch implements BMM150 driver with polling mode and its tested with original BMM150 sensor hardware. Driver works on I2C interface as of now. Following datasheet is taken as reference while developing driver. http://www.mouser.com/ds/2/783/BST-BMM150-DS001-01-786480.pdf Signed-off-by: Punit Vara <punit.vara@intel.com>
2017-05-31 10:34:40 +05:30
source "drivers/sensor/bmm150/Kconfig"
drivers: sensor: Add support for CCS811 Digital Gas Sensor Add support for AMS CCS811 Digital Gas Sensor for monitoring indoor air quality. This sensor reports the following parameters: 1. Co2 concentration 2. VOC concentration 3. Sensor voltage 4. Sensor current This driver only supports polling mode as of now. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-01-05 08:09:05 -08:00
source "drivers/sensor/ccs811/Kconfig"
sensors: dht: move dht to own directory under drivers/sensor/ Change-Id: Id19b4ea414347caa23730e3ccd4f79761878af01 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:54 -04:00
source "drivers/sensor/dht/Kconfig"
sensors: add driver for DHTxx sensors Add driver for the DHT temperature and relative himidity sensor family. The sensor has a single signal pin (in addition to GND and VDD) over which communication is done in a half-duplex manner (see datasheet for more details). Datasheets: http://www.micropik.com/PDF/dht11.pdf https://www.sparkfun.com/datasheets/Sensors/Temperature/DHT22.pdf http://akizukidenshi.com/download/ds/aosong/AM2302.pdf Origin: Original Change-Id: If8c8be73d7fdfef2ab2091bf9b8fe72bcd700ed1 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-10 12:09:28 +03:00
drivers: sensor: ens210: Implement AMS ens210 Sensor Implementation of AMS (Austria Micro Systems) ENS210 temperature and relative humidity sensor. Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2018-10-08 16:07:47 +02:00
source "drivers/sensor/ens210/Kconfig"
sensor: fxas21002: Add gyroscope driver Adds sensor driver support for the NXP FXAS21002 3-axis gyroscope. Includes statically configurable range and output data rate, as well as the sensor data ready trigger. Datasheet: http://www.nxp.com/assets/documents/data/en/data-sheets/FXAS21002.pdf Jira: ZEP-1392 Change-Id: I84587c4d5e76863245e9d045c6abb10b21b2615a Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-03-28 07:36:49 -05:00
source "drivers/sensor/fxas21002/Kconfig"
sensor: fxos8700: Add accelerometer/magnetometer driver Adds basic sensor driver support for the NXP FXOS8700 6-axis accelerometer/magnetometer. Currently this driver supports accelerometer-only, magnetometer-only, and hybrid (accelerometer + magnetometer) modes, as well as 2g, 4g, and 8g accelerometer full scale ranges. This driver does not yet support any sensor triggers such as the data ready trigger, or runtime changing of sensor attributes. Datasheet: http://cache.nxp.com/files/sensors/doc/data_sheet/FXOS8700CQ.pdf Origin: Original Jira: ZEP-721 Change-Id: Iff0f751c737196f60d5c5d3448631b57093ece34 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2016-10-24 23:45:12 -05:00
source "drivers/sensor/fxos8700/Kconfig"
sensors: move grove sensors under drivers/sensor Grove devices are sensors, so no need to have them under their own category. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-10-19 08:43:50 -04:00
source "drivers/sensor/grove/Kconfig"
sensors: renamed hdc1008 driver into ti_hdc Hdc1008 driver is renamed into ti_hdc to prepare it to support all available Texas Instruments HDC sensors (e.g. hdc1080, hdc2080). Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
2019-02-12 11:50:47 +02:00
source "drivers/sensor/ti_hdc/Kconfig"
sensor: add driver for HDC1008 temperature and humidity sensor Add driver for the HDC1008 temperature and relative humidity sensor. Datasheet: http://www.ti.com/lit/ds/symlink/hdc1008.pdf Origin: Original Change-Id: I63cb4cdd94120b80d0d6f3205da073f0817c4f17 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-02-26 14:40:25 +02:00
sensors: hmc5883l: move hmc5883l to own directory under drivers/sensor/ Change-Id: I5b1126238686b239a5abb73d3ddc966e7d7150d3 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:55 -04:00
source "drivers/sensor/hmc5883l/Kconfig"
sensor: add driver for HMC5883L magnetometer Add driver for the I2C-based Honeywell HMC5883L magnetometer. Datasheet: https://cdn-shop.adafruit.com/datasheets/HMC5883L_3-Axis_Digital_Compass_IC.pdf Change-Id: I9ad56a7533d8d67402aa2ae2862ba339b04d3525 Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-06-08 15:59:31 +03:00
sensors: hp206c: move hp206c to own directory under drivers/sensor/ Change-Id: Ie218228c16584384312200522f43edbd15aadf30 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:55 -04:00
source "drivers/sensor/hp206c/Kconfig"
sensor: add driver for HP206C sensor This sensor is a high precision barometer, altimeter and temperature sensor. It can also be found on the Grove Barometer module (v1.0). Sensor datasheet: http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf Grove link: http://www.seeedstudio.com/depot/Grove-Barometer-HighAccuracy-p-1865.html Origin: Original Change-Id: I99986b26b6b4447e31e12a1fc17ede3e6bb4c586 Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2016-05-17 17:17:33 +03:00
sensors: hts221: move hts221 to own directory under drivers/sensor/ Change-Id: Id568ee3fae62090ef2711d34fbfd9de214630008 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:56 -04:00
source "drivers/sensor/hts221/Kconfig"
sensor: add driver for HTS221 sensor Add driver for HTS221 temeprature and relative humidity sensor. Datasheet: http://www.st.com/resource/en/datasheet/hts221.pdf Interpreting humidity and temperature readings document: http://www.st.com/resource/en/technical_note/dm00208001.pdf Change-Id: I1fee9d8372ad71b22bc85a60939c82f81569e135 Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-24 12:09:22 +03:00
drivers/sensor: add support to IIS2DLPC accelerometer sensor The IIS2DLPC is a 3D digital accelerometer ultra-low power sensor for industrial applications, which can be interfaced through either I2C or SPI bus. https://www.st.com/resource/en/datasheet/iis2dlpc.pdf This driver is based on stmemsc i/f v1.02 Signed-off-by: Armando Visconti <armando.visconti@st.com>
2020-02-12 15:31:46 +01:00
source "drivers/sensor/iis2dlpc/Kconfig"
driver/sensor: add IIS3DHHC accelerometer sensor Add support to STM IIS3DHHC the ultra-low noise, high-stability three-axis linear accelerometer. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-09-05 15:19:40 +02:00
source "drivers/sensor/iis3dhhc/Kconfig"
sensors: isl29035: move isl29035 to own directory under drivers/sensor/ Change-Id: Ia0164f2891b1b2f3d19c63b8311d71e1f9abeeb5 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:56 -04:00
source "drivers/sensor/isl29035/Kconfig"
sensor: add isl29035 light sensor Add device driver for the isl29035 ambient light and infrared light sensor. Datasheet: http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29035.pdf Origin: Original Change-Id: Ib285f8def32d78d50f1d92998dca5f55d6603ca5 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-01-26 17:07:34 +02:00
drivers/sensor: add support to ISM330DHCX IMU sensor The ISM330DHCX is a ultra-low power IMU with a 3D digital accelerometer and 3D digital gyroscope tailored for Industry 4.0 applications, which can be interfaced through either I2C or SPI bus. https://www.st.com/resource/en/datasheet/ism330dhcx.pdf This driver is based on stmemsc i/f v1.02. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2020-03-06 10:54:25 +01:00
source "drivers/sensor/ism330dhcx/Kconfig"
sensor: lis2dh: Add support for lis2dh accelerometer * lis2dh 3 axis accelerometer support on SPI and I2C bus * data ready and anymotion type of trigger support Tested on Dynastream module D52QD2M4IA-A using SPI Origin: based on Zephyr lis3dh driver Change-Id: I2c4e9418b87f09c957bba8f73522bd78830bc809 Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
2017-05-04 13:14:23 +02:00
source "drivers/sensor/lis2dh/Kconfig"
driver/sensor: add LIS2DS12 sensor support Add support to STM LIS2DS12 3-axis accelerometer driver. The driver support I2C and SPI bus communication and both polling and drdy trigger mode. Currently it uses high resolution only as power mode. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-01-15 14:59:12 +01:00
source "drivers/sensor/lis2ds12/Kconfig"
driver/sensor: add LIS2DW12 sensor support Add support to STM LIS2DW12 3-axis accelerometer driver. The driver support I2C and SPI bus communication and both polling and drdy trigger mode. Co-authored-by: Mario Tesi <mario.tesi@st.com> Signed-off-by: Armando Visconti <armando.visconti@st.com>
2018-05-17 15:32:05 +02:00
source "drivers/sensor/lis2dw12/Kconfig"
driver: sensor: Add support for LIS2MDL Mag sensor Added support to LIS2MDL Magnetometer sensor provided with following features: - I2C interface - Mag data - Temperature data - ODR configurable by config or at runtime - Trigger mode selectable by menuconfig - IRQ pin configurable (by dts or Kconfig) - Hard Iron offset setting at runtime - Include yaml file Tested on ST MEMS IKS01A2 + NUCLEO STM32F411RE board. LIS2MDL connected to I2C master interface (SPI 3 wire not supported yet). Test run with all ODR {10, 20, 50, 100} Hz in poll and trigger mode. GPIO IRQ dts configuration has been tested by adding to boards/arm/nucleo_f411re/nucleo_f411re.dts file this patch: &i2c1 { status = "ok"; clock-frequency = <I2C_BITRATE_FAST>; + + /* ST Microelectronics LIS2MDL mag sensor */ + lis2mdl-magn@1e { + compatible = "st,lis2mdl-magn"; + reg = <0x1e>; + irq-gpios = <&gpioa 4 0>; + label = "LIS2MDL"; + status = "ok"; + }; }; and adding boards/arm/nucleo_f411re/dts.fixup with following content: ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_LABEL ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BASE_ADDRESS ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BUS_NAME ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_CONTROLLER ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_PIN For more info on this LIS2MDL please follow this link: http://www.st.com/en/mems-and-sensors/lis2mdl.html Signed-off-by: Mario Tesi <mario.tesi@st.com>
2018-03-08 15:34:55 +01:00
source "drivers/sensor/lis2mdl/Kconfig"
sensors: lis3mdl: move lis3mdl to own directory under drivers/sensor/ Change-Id: Ie3140e7eb6dcfab6008af3ba85dc9119c5dbfb50 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:57 -04:00
source "drivers/sensor/lis3mdl/Kconfig"
sensor: add driver for LIS3MDL magnetometer Add driver for the LIS3MDL ultra-low-power high-performance three-axis magnetic sensor. Datasheet: http://www.st.com/resource/en/datasheet/lis3mdl.pdf Application note: http://www.st.com/resource/en/application_note/dm00136626.pdf Change-Id: Id2d65e7525bef6c4fe50f86169a80f84197f8983 Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-18 10:24:46 +03:00
sensors: add lps22hb sensor driver Support for LPS22HB Pressure and temperature sensor provided with bare minimum features. For more info on this sensor: http://www.st.com/en/mems-and-sensors/lps22hb.html Change-Id: I14992b954053094beb054d0dba7581f6e29a3e68 Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2017-05-02 15:21:36 +02:00
source "drivers/sensor/lps22hb/Kconfig"
driver/sensor: add LPS22HH sensor support Add support to STM LPS22HH pressure and temperature sensor. The driver support I2C and SPI bus communication and both polling and drdy trigger mode. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-01-29 11:06:35 +01:00
source "drivers/sensor/lps22hh/Kconfig"
sensors: lps25hb: move lps25hb to own directory under drivers/sensor/ Change-Id: I5d9c802a8ec9d29557417b687c92b2430aca9fe1 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:57 -04:00
source "drivers/sensor/lps25hb/Kconfig"
sensor: add driver for LPS25HB Add driver for LPS25HB pressure and temperature sensor. Datasheet: http://www.st.com/content/ccc/resource/technical/document/datasheet/9a/4c/aa/72/1f/45/4e/24/DM00141379.pdf/files/DM00141379.pdf/jcr:content/translations/en.DM00141379.pdf Change-Id: I6b616e879777b52f16f4e867c330e8beacf59fd3 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com> Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-06-01 16:11:01 +03:00
drivers: sensor: lsm303dlhc magnetometer driver Enable magnetometer measurement Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
2018-03-01 21:54:36 +01:00
source "drivers/sensor/lsm303dlhc_magn/Kconfig"
sensors: lsm6ds0: move lsm6ds0 to own directory under drivers/sensor/ Change-Id: Ia2911f584da30fd583318e9730ad1ec147ba6f8b Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:58 -04:00
source "drivers/sensor/lsm6ds0/Kconfig"
sensor: add driver for LSM6DS0 Add driver for LSM6DS0 accelerometer, gyroscope and temperature sensor. Change-Id: Ic04fa8d0bbf935e7f04ed7981554d8095ceb5ccf Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-05-17 16:52:35 +03:00
sensor: add lsm6dsl sensor driver Support for LSM6DSL accelerometer and gyroscpe sensor with bare minimum features. For more info on this sensor: http://www.st.com/en/mems-and-sensors/lsm6dsl.html Change-Id: I9b100a3e030faa8a70a5015a881025c876b81be4 Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2017-05-04 16:56:44 +02:00
source "drivers/sensor/lsm6dsl/Kconfig"
driver/sensor: lsm6dso: Add support Add support to STM LSM6DSO 6-axis IMU sensor driver. This driver supports communication with device though both I2C and SPI bus and both polling and drdy trigger mode. This driver supports also the sensorhub mode with the possibility to connect a maximum of two external devices, typically a magnetometer and an environmental sensor, currently selected among following devices: lis2mdl magnetometer, lps22hh or lps22hb pressure and temperature sensors, HTS221 humidity sensor. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-02-18 15:17:54 +01:00
source "drivers/sensor/lsm6dso/Kconfig"
sensors: lsm9ds0_gyro: move lsm9ds0_gyro to own directory under drivers/sensor/ Change-Id: Ia654ab8059d656da6b4414a3fe35c81ec39654d3 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:58 -04:00
source "drivers/sensor/lsm9ds0_gyro/Kconfig"
sensor: add driver for BMC150 magnetometer Add device driver for the magnetometer part of BMC150 sensor. Datasheet: https://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf Change-Id: Id7cbfd872a0a37e20afb03a8155c1f6851710a16 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-02-17 13:32:13 +02:00
sensors: lsm9ds0_mfd: move lsm9ds0_mfd to own directory under drivers/sensor/ Change-Id: If07b2a73a8acad7f89f650ec304199961a629e28 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:19:59 -04:00
source "drivers/sensor/lsm9ds0_mfd/Kconfig"
sensor: add driver for LSM9DS0 accel and magn Add device driver for the multi function device (MFD) part of LSM9DS0: accelerometer, magnetometer and temperature. Datasheet: https://www.adafruit.com/datasheets/LSM9DS0.pdf Change-Id: I00b9db2c69c6e5229269afacb02bf5f921edabe9 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-03-16 17:17:56 +02:00
sensor: max30101: Add heart rate sensor driver Adds basic sensor driver support for the Maxim MAX30101 heart rate sensor. This driver does not yet support any sensor triggers such as the data ready trigger, or runtime changing of sensor attributes. Default configuration values were taken from the MikroE Hexiwear driver. https://github.com/MikroElektronika/HEXIWEAR Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30101.pdf Jira: ZEP-720 Change-Id: Ie8981e124da36a56a214f133bf9a11b9f47d60fa Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-03-17 19:59:26 -05:00
source "drivers/sensor/max30101/Kconfig"
sensors: max44009: move max44009 to own directory under drivers/sensor/ Change-Id: I6b063ebeb53ce6ababd027e15d8d7d94f6174a53 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:20:00 -04:00
source "drivers/sensor/max44009/Kconfig"
sensor: add driver for MAX44009 light sensor Add device driver for MAX44009 light sensor Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX44009.pdf Jira: ZEP-357 Origin: Original Change-Id: I6b5c8e0afc36c22de0a6432d01cd5b7eb2e12f1b Signed-off-by: Baohong Liu <baohong.liu@intel.com>
2016-07-07 18:33:29 -07:00
drivers: sensors: Add tachometer driver for MEC family Introduce the tach driver for the microchip XEC SoCs. Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
2020-02-03 18:08:13 -08:00
source "drivers/sensor/mchp_tach_xec/Kconfig"
sensors: mcp9808: move mcp9808 to own directory under drivers/sensor/ Change-Id: I8327d821b95b5bd8c13d5f24dd5ec46fa53b2d18 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:20:00 -04:00
source "drivers/sensor/mcp9808/Kconfig"
sensor: Add threshold trigger support for MCP9808 The MCP9808 supports threshold triggering. Add support for this feature in the driver and the sample application. If triggering is activated, the driver can create its own fiber or use the system-wide sensor fiber. Origin: Original Change-Id: Ie825a22245cb48cbdffba3049011e4d305975d53 Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
2016-02-23 17:10:20 +02:00
sensors: mpu6050: move mpu6050 to own directory under drivers/sensor/ Change-Id: Ia0c4e81f8725da6fc5fead7a86320b613336e702 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:20:01 -04:00
source "drivers/sensor/mpu6050/Kconfig"
sensor: add driver for MPU6050 sensor Add driver to MPU6050 six-axis motion tracking device. The driver has support for accelerometer, gyroscope and temperature channels. Datasheet: http://43zrtwysvxb2gf29r5o0athu.wpengine.netdna-cdn.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf Register Map: http://43zrtwysvxb2gf29r5o0athu.wpengine.netdna-cdn.com/wp-content/uploads/2015/02/MPU-6000-Register-Map1.pdf Change-Id: Id3930fc666195051093fee80c15cf2deb0eaedff Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-31 10:53:22 +03:00
drivers: sensors: Added MS5837 driver Added MS5837 pressure sensor driver Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-04-29 18:04:33 +02:00
source "drivers/sensor/ms5837/Kconfig"
sensor: add ms5607 sensor Implement a driver for the te connectivity ms5607 pressure and temperature sensor. Signed-off-by: Thomas Schmid <tom@lfence.de>
2019-09-30 22:24:57 +02:00
source "drivers/sensor/ms5607/Kconfig"
sensor: Add nRF5 temperature driver. Basic interrupt driven driver for the nRF5 onboard temperature sensor. Change-Id: Id0ac303293b8e8b8285b19bcda31284ee6617105 Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-11-23 20:28:28 +00:00
source "drivers/sensor/nrf5/Kconfig"
drivers: sensor: Add OPT3001 light sensor driver Add OPT3001 light sensor driver Signed-off-by: Iosif Macesanu <iosif@actinius.com>
2019-10-14 17:29:05 +02:00
source "drivers/sensor/opt3001/Kconfig"
drivers: sensor: Fix some code style issues Signed-off-by: Yongfa Zhou <yongfa.zhou@intel.com>
2017-11-24 21:50:13 +08:00
source "drivers/sensor/pms7003/Kconfig"
drivers: sensors: qdec_nrfx: Add support for Nordic QDEC Add a QDEC driver that utilizes Nordic's QDEC. This closes issue #9364 Jira:DESK-259 Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
2018-10-17 10:39:10 +02:00
source "drivers/sensor/qdec_nrfx/Kconfig"
sensors: sht3xd: move sht3xd to own directory under drivers/sensor/ Change-Id: I8d13f5b2461169940f24a08346f0da0c291a8fef Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:20:01 -04:00
source "drivers/sensor/sht3xd/Kconfig"
sensor: add driver for SHT3xD sensors Add device driver for the SHT3xD temperature and humidity sensors. Datasheets: https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/Humidity_Sensors/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/Humidity_Sensors/Sensirion_Humidity_Sensors_SHT3x_Application_Note_Alert_Mode_DIS_V1.pdf Origin: Original Change-Id: I9cda2f1bc7172e93ce34fde63c6febf0b8b28289 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-02-22 16:22:16 +02:00
drivers: sensors: Add Si7006 temperature/humidity sensor driver Adds driver for Silicon Labs Si7006 chip. Signed-off-by: Vaishali Pathak <vaishali@electronut.in>
2019-04-04 20:07:12 +05:30
source "drivers/sensor/si7006/Kconfig"
drivers: sensor: Add SI7060 temperature sensor driver Add SI7060 temperature sensor driver Signed-off-by: Iosif Macesanu <iosif@actinius.com>
2019-10-14 17:46:01 +02:00
source "drivers/sensor/si7060/Kconfig"
driver/sensor: add STTS751 temperature sensor Add support to STM STTS751 temperature sensor. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-07-16 08:40:16 +02:00
source "drivers/sensor/stts751/Kconfig"
sensors: sx9500: move sx9500 to own directory under drivers/sensor/ Change-Id: Ifc7dfd8a28d33f140415ca178b56d35e51aff178 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:20:02 -04:00
source "drivers/sensor/sx9500/Kconfig"
sensors: add driver for TMP007 infrared thermopile sensor Add driver for the TMP007 intrared thermopile sensor which measures the temperature of an object without direct contact. Datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf Origin: Original Change-Id: I29857b2e424a2144370d75e2ee40c4ff8b619afd Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-05 14:37:45 +03:00
sensors: add TH02 temperature sensor (Grove) Support for the Temperature&Humidity Sensor (High-Accuracy &Mini) v1.0 sensor, see: http://wiki.seeed.cc/Grove-TemptureAndHumidity_Sensor-High-Accuracy_AndMini-v1.0/ Change-Id: I439eafc863116f21e3b3385175d1935e60a5e9b1 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-08 07:32:44 -04:00
source "drivers/sensor/th02/Kconfig"
sensors: tmp007: move tmp007 to own directory under drivers/sensor/ Change-Id: If5fd1277ec93455ee7a1e856357dfab0930a653c Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:20:02 -04:00
source "drivers/sensor/tmp007/Kconfig"
sensor: add driver for TMP112 temperature sensor Add device driver for the TMP112 I2C temperature sensor Datasheet: http://www.ti.com/lit/ds/slos887d/slos887d.pdf Change-Id: I08208204cd8f377dc65378aaf2b92c7cdefe8d2b Origin: Original Signed-off-by: Mariusz Ryndzionek <mariusz.ryndzionek@firmwave.com>
2016-06-18 13:14:11 +02:00
sensors: tmp112: move tmp112 to own directory under drivers/sensor/ Change-Id: I85023f60ee3c5303a6c065f8ee1b238106b13e49 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 08:20:03 -04:00
source "drivers/sensor/tmp112/Kconfig"
drivers: sensor: clean up Kconfig files - place all sensor Kconfig options in submenu - separate device drivers and common options with a comment line - align help text Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-09-21 20:28:16 +02:00
drivers: sensor: Add TMP116 Added driver for TI's TMP116. This driver does not use the Alert functionality. Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-08-23 11:33:07 +03:00
source "drivers/sensor/tmp116/Kconfig"
driver: sensor: Add vl53l0x Add driver for ST vl53l0x time of flight sensor. This driver can be used in 2 modes : * proximity sensor : configure VL53L0X_PROXIMITY_THRESHOLD will return 1 if target is between sensor and threshold, else, 0 * distance sensor : will return the distance in millimeters from sensor to target This driver use the official STMicroelectronics library for vl53l0x. (in ext/hal/st/lib/sensor/vl53l0x) Signed-off-by: Vincent Veron <vincent.veron@st.com>
2017-07-19 16:59:43 +02:00
source "drivers/sensor/vl53l0x/Kconfig"
drivers: sensor: add driver for the nxp kinetis temperature sensor Add sensor driver for the internal temperature sensor present in the NXP Kinetis SoC series. The driver allows reading the die temperature and the voltage of the external voltage reference used for calculating the temperature. Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2020-01-12 23:17:56 +01:00
source "drivers/sensor/nxp_kinetis_temp/Kconfig"
drivers: sensor: clean up Kconfig files - place all sensor Kconfig options in submenu - separate device drivers and common options with a comment line - align help text Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-09-21 20:28:16 +02:00
endif # SENSOR
Copy permalink