zephyr/subsys/bluetooth/host/hci_core.c

5311 lines
119 KiB
C
Raw Normal View History

/* hci_core.c - HCI core Bluetooth handling */
/*
* Copyright (c) 2017 Nordic Semiconductor ASA
* Copyright (c) 2015-2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <zephyr.h>
#include <string.h>
#include <stdio.h>
#include <errno.h>
#include <atomic.h>
#include <misc/util.h>
#include <misc/slist.h>
#include <misc/byteorder.h>
#include <misc/stack.h>
#include <misc/__assert.h>
#include <soc.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/conn.h>
#include <bluetooth/l2cap.h>
#include <bluetooth/hci.h>
#include <bluetooth/hci_vs.h>
#include <bluetooth/hci_driver.h>
#define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_DEBUG_HCI_CORE)
#include "common/log.h"
#include "common/rpa.h"
#include "keys.h"
#include "monitor.h"
#include "hci_core.h"
#include "hci_ecc.h"
#include "ecc.h"
#include "conn_internal.h"
#include "l2cap_internal.h"
#include "gatt_internal.h"
#include "smp.h"
#include "crypto.h"
#include "settings.h"
/* Peripheral timeout to initialize Connection Parameter Update procedure */
#define CONN_UPDATE_TIMEOUT K_SECONDS(5)
#define RPA_TIMEOUT K_SECONDS(CONFIG_BT_RPA_TIMEOUT)
#define HCI_CMD_TIMEOUT K_SECONDS(10)
/* Stacks for the threads */
#if !defined(CONFIG_BT_RECV_IS_RX_THREAD)
static struct k_thread rx_thread_data;
static BT_STACK_NOINIT(rx_thread_stack, CONFIG_BT_RX_STACK_SIZE);
#endif
static struct k_thread tx_thread_data;
static BT_STACK_NOINIT(tx_thread_stack, CONFIG_BT_HCI_TX_STACK_SIZE);
static void init_work(struct k_work *work);
struct bt_dev bt_dev = {
.init = _K_WORK_INITIALIZER(init_work),
/* Give cmd_sem allowing to send first HCI_Reset cmd, the only
* exception is if the controller requests to wait for an
* initial Command Complete for NOP.
*/
#if !defined(CONFIG_BT_WAIT_NOP)
.ncmd_sem = _K_SEM_INITIALIZER(bt_dev.ncmd_sem, 1, 1),
#else
.ncmd_sem = _K_SEM_INITIALIZER(bt_dev.ncmd_sem, 0, 1),
#endif
.cmd_tx_queue = _K_FIFO_INITIALIZER(bt_dev.cmd_tx_queue),
#if !defined(CONFIG_BT_RECV_IS_RX_THREAD)
.rx_queue = _K_FIFO_INITIALIZER(bt_dev.rx_queue),
#endif
};
static bt_ready_cb_t ready_cb;
static bt_le_scan_cb_t *scan_dev_found_cb;
static u8_t pub_key[64];
static struct bt_pub_key_cb *pub_key_cb;
static bt_dh_key_cb_t dh_key_cb;
#if defined(CONFIG_BT_BREDR)
static bt_br_discovery_cb_t *discovery_cb;
struct bt_br_discovery_result *discovery_results;
static size_t discovery_results_size;
static size_t discovery_results_count;
#endif /* CONFIG_BT_BREDR */
struct cmd_data {
/** HCI status of the command completion */
u8_t status;
/** The command OpCode that the buffer contains */
u16_t opcode;
/** Used by bt_hci_cmd_send_sync. */
struct k_sem *sync;
};
struct acl_data {
2016-04-09 11:29:50 +03:00
/** BT_BUF_ACL_IN */
u8_t type;
2016-04-09 11:29:50 +03:00
/* Index into the bt_conn storage array */
u8_t id;
/** ACL connection handle */
u16_t handle;
};
static struct cmd_data cmd_data[CONFIG_BT_HCI_CMD_COUNT];
#define cmd(buf) (&cmd_data[net_buf_id(buf)])
#define acl(buf) ((struct acl_data *)net_buf_user_data(buf))
/* HCI command buffers. Derive the needed size from BT_BUF_RX_SIZE since
* the same buffer is also used for the response.
*/
#define CMD_BUF_SIZE BT_BUF_RX_SIZE
NET_BUF_POOL_DEFINE(hci_cmd_pool, CONFIG_BT_HCI_CMD_COUNT,
CMD_BUF_SIZE, BT_BUF_USER_DATA_MIN, NULL);
NET_BUF_POOL_DEFINE(hci_rx_pool, CONFIG_BT_RX_BUF_COUNT,
BT_BUF_RX_SIZE, BT_BUF_USER_DATA_MIN, NULL);
#if defined(CONFIG_BT_HCI_ACL_FLOW_CONTROL)
static void report_completed_packet(struct net_buf *buf)
{
struct bt_hci_cp_host_num_completed_packets *cp;
u16_t handle = acl(buf)->handle;
struct bt_hci_handle_count *hc;
struct bt_conn *conn;
net_buf_destroy(buf);
/* Do nothing if controller to host flow control is not supported */
if (!(bt_dev.supported_commands[10] & 0x20)) {
return;
}
conn = bt_conn_lookup_id(acl(buf)->id);
if (!conn) {
BT_WARN("Unable to look up conn with id 0x%02x", acl(buf)->id);
return;
}
if (conn->state != BT_CONN_CONNECTED &&
conn->state != BT_CONN_DISCONNECT) {
BT_WARN("Not reporting packet for non-connected conn");
bt_conn_unref(conn);
return;
}
bt_conn_unref(conn);
BT_DBG("Reporting completed packet for handle %u", handle);
buf = bt_hci_cmd_create(BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS,
sizeof(*cp) + sizeof(*hc));
if (!buf) {
BT_ERR("Unable to allocate new HCI command");
return;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->num_handles = sys_cpu_to_le16(1);
hc = net_buf_add(buf, sizeof(*hc));
hc->handle = sys_cpu_to_le16(handle);
hc->count = sys_cpu_to_le16(1);
bt_hci_cmd_send(BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS, buf);
}
#define ACL_IN_SIZE BT_L2CAP_BUF_SIZE(CONFIG_BT_L2CAP_RX_MTU)
NET_BUF_POOL_DEFINE(acl_in_pool, CONFIG_BT_ACL_RX_COUNT, ACL_IN_SIZE,
BT_BUF_USER_DATA_MIN, report_completed_packet);
#endif /* CONFIG_BT_HCI_ACL_FLOW_CONTROL */
struct net_buf *bt_hci_cmd_create(u16_t opcode, u8_t param_len)
{
struct bt_hci_cmd_hdr *hdr;
struct net_buf *buf;
BT_DBG("opcode 0x%04x param_len %u", opcode, param_len);
net: buf: Redesigned pool & buffer allocation API Until now it has been necessary to separately define a k_fifo and an array of buffers when creating net_buf pools. This has been a bit of an inconvenience as well as blurred the line of what exactly constitutes the "pool". This patch removes the NET_BUF_POOL() macro and replaces it with a NET_BUF_POOL_DEFINE() macro that internally expands into the buffer array and new net_buf_pool struct with a given name: NET_BUF_POOL_DEFINE(pool_name, ...); Having a dedicated context struct for the pool has the added benefit that we can start moving there net_buf members that have the same value for all buffers from the same pool. The first such member that gets moved is the destroy callback, thus shrinking net_buf by four bytes. Another potential candidate is the user_data_size, however right not that's left out since it would just leave 2 bytes of padding in net_buf (i.e. not influence its size). Another common value is buf->size, however that one is also used by net_buf_simple and can therefore not be moved. This patch also splits getting buffers from a FIFO and allocating a new buffer from a pool into two separate APIs: net_buf_get and net_buf_alloc, thus simplifying the APIs and their usage. There is no separate 'reserve_head' parameter anymore when allocating, rather the user is expected to call net_buf_reserve() afterwards if something else than 0 headroom is desired. Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-10-18 23:24:51 +03:00
buf = net_buf_alloc(&hci_cmd_pool, K_FOREVER);
__ASSERT_NO_MSG(buf);
BT_DBG("buf %p", buf);
net_buf_reserve(buf, CONFIG_BT_HCI_RESERVE);
net: buf: Redesigned pool & buffer allocation API Until now it has been necessary to separately define a k_fifo and an array of buffers when creating net_buf pools. This has been a bit of an inconvenience as well as blurred the line of what exactly constitutes the "pool". This patch removes the NET_BUF_POOL() macro and replaces it with a NET_BUF_POOL_DEFINE() macro that internally expands into the buffer array and new net_buf_pool struct with a given name: NET_BUF_POOL_DEFINE(pool_name, ...); Having a dedicated context struct for the pool has the added benefit that we can start moving there net_buf members that have the same value for all buffers from the same pool. The first such member that gets moved is the destroy callback, thus shrinking net_buf by four bytes. Another potential candidate is the user_data_size, however right not that's left out since it would just leave 2 bytes of padding in net_buf (i.e. not influence its size). Another common value is buf->size, however that one is also used by net_buf_simple and can therefore not be moved. This patch also splits getting buffers from a FIFO and allocating a new buffer from a pool into two separate APIs: net_buf_get and net_buf_alloc, thus simplifying the APIs and their usage. There is no separate 'reserve_head' parameter anymore when allocating, rather the user is expected to call net_buf_reserve() afterwards if something else than 0 headroom is desired. Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-10-18 23:24:51 +03:00
bt_buf_set_type(buf, BT_BUF_CMD);
cmd(buf)->opcode = opcode;
cmd(buf)->sync = NULL;
hdr = net_buf_add(buf, sizeof(*hdr));
hdr->opcode = sys_cpu_to_le16(opcode);
hdr->param_len = param_len;
return buf;
}
int bt_hci_cmd_send(u16_t opcode, struct net_buf *buf)
{
if (!buf) {
buf = bt_hci_cmd_create(opcode, 0);
if (!buf) {
return -ENOBUFS;
}
}
BT_DBG("opcode 0x%04x len %u", opcode, buf->len);
/* Host Number of Completed Packets can ignore the ncmd value
* and does not generate any cmd complete/status events.
*/
if (opcode == BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS) {
int err;
err = bt_send(buf);
if (err) {
BT_ERR("Unable to send to driver (err %d)", err);
net_buf_unref(buf);
}
return err;
}
net_buf_put(&bt_dev.cmd_tx_queue, buf);
return 0;
}
int bt_hci_cmd_send_sync(u16_t opcode, struct net_buf *buf,
struct net_buf **rsp)
{
struct k_sem sync_sem;
int err;
if (!buf) {
buf = bt_hci_cmd_create(opcode, 0);
if (!buf) {
return -ENOBUFS;
}
}
BT_DBG("buf %p opcode 0x%04x len %u", buf, opcode, buf->len);
k_sem_init(&sync_sem, 0, 1);
cmd(buf)->sync = &sync_sem;
/* Make sure the buffer stays around until the command completes */
net_buf_ref(buf);
net_buf_put(&bt_dev.cmd_tx_queue, buf);
err = k_sem_take(&sync_sem, HCI_CMD_TIMEOUT);
__ASSERT(err == 0, "k_sem_take failed with err %d", err);
BT_DBG("opcode 0x%04x status 0x%02x", opcode, cmd(buf)->status);
if (cmd(buf)->status) {
err = -EIO;
net_buf_unref(buf);
} else {
err = 0;
if (rsp) {
*rsp = buf;
} else {
net_buf_unref(buf);
}
}
return err;
}
static const bt_addr_le_t *find_id_addr(const bt_addr_le_t *addr)
{
if (IS_ENABLED(CONFIG_BT_SMP)) {
struct bt_keys *keys;
keys = bt_keys_find_irk(addr);
if (keys) {
BT_DBG("Identity %s matched RPA %s",
bt_addr_le_str(&keys->addr),
bt_addr_le_str(addr));
return &keys->addr;
}
}
return addr;
}
static int set_advertise_enable(bool enable)
{
struct net_buf *buf;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADV_ENABLE, 1);
if (!buf) {
return -ENOBUFS;
}
if (enable) {
net_buf_add_u8(buf, BT_HCI_LE_ADV_ENABLE);
} else {
net_buf_add_u8(buf, BT_HCI_LE_ADV_DISABLE);
}
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_ADV_ENABLE, buf, NULL);
if (err) {
return err;
}
if (enable) {
atomic_set_bit(bt_dev.flags, BT_DEV_ADVERTISING);
} else {
atomic_clear_bit(bt_dev.flags, BT_DEV_ADVERTISING);
}
return 0;
}
static int set_random_address(const bt_addr_t *addr)
{
struct net_buf *buf;
int err;
BT_DBG("%s", bt_addr_str(addr));
/* Do nothing if we already have the right address */
if (!bt_addr_cmp(addr, &bt_dev.random_addr.a)) {
return 0;
}
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_RANDOM_ADDRESS, sizeof(*addr));
if (!buf) {
return -ENOBUFS;
}
net_buf_add_mem(buf, addr, sizeof(*addr));
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_RANDOM_ADDRESS, buf, NULL);
if (err) {
return err;
}
bt_addr_copy(&bt_dev.random_addr.a, addr);
bt_dev.random_addr.type = BT_ADDR_LE_RANDOM;
return 0;
}
#if defined(CONFIG_BT_PRIVACY)
/* this function sets new RPA only if current one is no longer valid */
static int le_set_private_addr(void)
{
bt_addr_t rpa;
int err;
/* check if RPA is valid */
if (atomic_test_bit(bt_dev.flags, BT_DEV_RPA_VALID)) {
return 0;
}
err = bt_rpa_create(bt_dev.irk, &rpa);
if (!err) {
err = set_random_address(&rpa);
if (!err) {
atomic_set_bit(bt_dev.flags, BT_DEV_RPA_VALID);
}
}
/* restart timer even if failed to set new RPA */
k_delayed_work_submit(&bt_dev.rpa_update, RPA_TIMEOUT);
return err;
}
static void rpa_timeout(struct k_work *work)
{
BT_DBG("");
/* Invalidate RPA */
atomic_clear_bit(bt_dev.flags, BT_DEV_RPA_VALID);
/*
* we need to update rpa only if advertising is ongoing, with
* BT_DEV_KEEP_ADVERTISING flag is handled in disconnected event
*/
if (atomic_test_bit(bt_dev.flags, BT_DEV_ADVERTISING)) {
/* make sure new address is used */
set_advertise_enable(false);
le_set_private_addr();
set_advertise_enable(true);
}
if (atomic_test_bit(bt_dev.flags, BT_DEV_ACTIVE_SCAN)) {
/* TODO do we need to toggle scan? */
le_set_private_addr();
}
}
#else
static int le_set_private_addr(void)
{
bt_addr_t nrpa;
int err;
err = bt_rand(nrpa.val, sizeof(nrpa.val));
if (err) {
return err;
}
nrpa.val[5] &= 0x3f;
return set_random_address(&nrpa);
}
#endif
static int set_le_scan_enable(u8_t enable)
{
struct bt_hci_cp_le_set_scan_enable *cp;
struct net_buf *buf;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_ENABLE, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
if (enable == BT_HCI_LE_SCAN_ENABLE) {
cp->filter_dup = atomic_test_bit(bt_dev.flags,
BT_DEV_SCAN_FILTER_DUP);
} else {
cp->filter_dup = BT_HCI_LE_SCAN_FILTER_DUP_DISABLE;
}
cp->enable = enable;
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_SCAN_ENABLE, buf, NULL);
if (err) {
return err;
}
if (enable == BT_HCI_LE_SCAN_ENABLE) {
atomic_set_bit(bt_dev.flags, BT_DEV_SCANNING);
} else {
atomic_clear_bit(bt_dev.flags, BT_DEV_SCANNING);
}
return 0;
}
#if defined(CONFIG_BT_CONN)
static void hci_acl(struct net_buf *buf)
{
struct bt_hci_acl_hdr *hdr = (void *)buf->data;
u16_t handle, len = sys_le16_to_cpu(hdr->len);
struct bt_conn *conn;
u8_t flags;
BT_DBG("buf %p", buf);
handle = sys_le16_to_cpu(hdr->handle);
flags = bt_acl_flags(handle);
acl(buf)->handle = bt_acl_handle(handle);
acl(buf)->id = BT_CONN_ID_INVALID;
net_buf_pull(buf, sizeof(*hdr));
BT_DBG("handle %u len %u flags %u", acl(buf)->handle, len, flags);
if (buf->len != len) {
BT_ERR("ACL data length mismatch (%u != %u)", buf->len, len);
net_buf_unref(buf);
return;
}
conn = bt_conn_lookup_handle(acl(buf)->handle);
if (!conn) {
BT_ERR("Unable to find conn for handle %u", acl(buf)->handle);
net_buf_unref(buf);
return;
}
acl(buf)->id = bt_conn_get_id(conn);
bt_conn_recv(conn, buf, flags);
bt_conn_unref(conn);
}
static void hci_num_completed_packets(struct net_buf *buf)
{
struct bt_hci_evt_num_completed_packets *evt = (void *)buf->data;
int i;
BT_DBG("num_handles %u", evt->num_handles);
for (i = 0; i < evt->num_handles; i++) {
u16_t handle, count;
struct bt_conn *conn;
unsigned int key;
handle = sys_le16_to_cpu(evt->h[i].handle);
count = sys_le16_to_cpu(evt->h[i].count);
BT_DBG("handle %u count %u", handle, count);
key = irq_lock();
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("No connection for handle %u", handle);
irq_unlock(key);
continue;
}
irq_unlock(key);
while (count--) {
sys_snode_t *node;
key = irq_lock();
node = sys_slist_get(&conn->tx_pending);
irq_unlock(key);
if (!node) {
BT_ERR("packets count mismatch");
break;
}
k_fifo_put(&conn->tx_notify, node);
k_sem_give(bt_conn_get_pkts(conn));
}
bt_conn_unref(conn);
}
}
static int hci_le_create_conn(const struct bt_conn *conn)
{
struct net_buf *buf;
struct bt_hci_cp_le_create_conn *cp;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_CREATE_CONN, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
memset(cp, 0, sizeof(*cp));
/* Interval == window for continuous scanning */
cp->scan_interval = sys_cpu_to_le16(BT_GAP_SCAN_FAST_INTERVAL);
cp->scan_window = cp->scan_interval;
bt_addr_le_copy(&cp->peer_addr, &conn->le.resp_addr);
cp->own_addr_type = conn->le.init_addr.type;
cp->conn_interval_min = sys_cpu_to_le16(conn->le.interval_min);
cp->conn_interval_max = sys_cpu_to_le16(conn->le.interval_max);
cp->conn_latency = sys_cpu_to_le16(conn->le.latency);
cp->supervision_timeout = sys_cpu_to_le16(conn->le.timeout);
return bt_hci_cmd_send_sync(BT_HCI_OP_LE_CREATE_CONN, buf, NULL);
}
static void hci_stack_dump(const struct k_thread *thread, void *user_data)
{
#if defined(CONFIG_THREAD_STACK_INFO)
stack_analyze((char *)user_data, (char *)thread->stack_info.start,
thread->stack_info.size);
#endif
}
static void hci_disconn_complete(struct net_buf *buf)
{
struct bt_hci_evt_disconn_complete *evt = (void *)buf->data;
u16_t handle = sys_le16_to_cpu(evt->handle);
struct bt_conn *conn;
BT_DBG("status %u handle %u reason %u", evt->status, handle,
evt->reason);
if (evt->status) {
return;
}
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to look up conn with handle %u", handle);
goto advertise;
}
conn->err = evt->reason;
/* Check stacks usage (no-ops if not enabled) */
k_thread_foreach(hci_stack_dump, "HCI");
#if !defined(CONFIG_BT_RECV_IS_RX_THREAD)
STACK_ANALYZE("rx stack", rx_thread_stack);
#endif
STACK_ANALYZE("tx stack", tx_thread_stack);
bt_conn_set_state(conn, BT_CONN_DISCONNECTED);
conn->handle = 0;
if (conn->type != BT_CONN_TYPE_LE) {
#if defined(CONFIG_BT_BREDR)
if (conn->type == BT_CONN_TYPE_SCO) {
bt_sco_cleanup(conn);
return;
}
/*
* If only for one connection session bond was set, clear keys
* database row for this connection.
*/
if (conn->type == BT_CONN_TYPE_BR &&
atomic_test_and_clear_bit(conn->flags, BT_CONN_BR_NOBOND)) {
bt_keys_link_key_clear(conn->br.link_key);
}
#endif
bt_conn_unref(conn);
return;
}
if (atomic_test_bit(conn->flags, BT_CONN_AUTO_CONNECT)) {
bt_conn_set_state(conn, BT_CONN_CONNECT_SCAN);
bt_le_scan_update(false);
}
bt_conn_unref(conn);
advertise:
if (atomic_test_bit(bt_dev.flags, BT_DEV_KEEP_ADVERTISING) &&
!atomic_test_bit(bt_dev.flags, BT_DEV_ADVERTISING)) {
if (IS_ENABLED(CONFIG_BT_PRIVACY) &&
!BT_FEAT_LE_PRIVACY(bt_dev.le.features)) {
le_set_private_addr();
}
set_advertise_enable(true);
}
}
static int hci_le_read_remote_features(struct bt_conn *conn)
{
struct bt_hci_cp_le_read_remote_features *cp;
struct net_buf *buf;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_READ_REMOTE_FEATURES,
sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = sys_cpu_to_le16(conn->handle);
bt_hci_cmd_send(BT_HCI_OP_LE_READ_REMOTE_FEATURES, buf);
return 0;
}
static int hci_le_set_data_len(struct bt_conn *conn)
{
struct bt_hci_rp_le_read_max_data_len *rp;
struct bt_hci_cp_le_set_data_len *cp;
struct net_buf *buf, *rsp;
u16_t tx_octets, tx_time;
int err;
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_MAX_DATA_LEN, NULL, &rsp);
if (err) {
return err;
}
rp = (void *)rsp->data;
tx_octets = sys_le16_to_cpu(rp->max_tx_octets);
tx_time = sys_le16_to_cpu(rp->max_tx_time);
net_buf_unref(rsp);
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_DATA_LEN, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = sys_cpu_to_le16(conn->handle);
cp->tx_octets = sys_cpu_to_le16(tx_octets);
cp->tx_time = sys_cpu_to_le16(tx_time);
err = bt_hci_cmd_send(BT_HCI_OP_LE_SET_DATA_LEN, buf);
if (err) {
return err;
}
return 0;
}
static int hci_le_set_phy(struct bt_conn *conn)
{
struct bt_hci_cp_le_set_phy *cp;
struct net_buf *buf;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_PHY, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = sys_cpu_to_le16(conn->handle);
cp->all_phys = 0;
cp->tx_phys = BT_HCI_LE_PHY_PREFER_2M;
cp->rx_phys = BT_HCI_LE_PHY_PREFER_2M;
cp->phy_opts = BT_HCI_LE_PHY_CODED_ANY;
bt_hci_cmd_send(BT_HCI_OP_LE_SET_PHY, buf);
return 0;
}
static void update_conn_param(struct bt_conn *conn)
{
/*
* Core 4.2 Vol 3, Part C, 9.3.12.2
* The Peripheral device should not perform a Connection Parameter
* Update procedure within 5 s after establishing a connection.
*/
k_delayed_work_submit(&conn->le.update_work,
conn->role == BT_HCI_ROLE_MASTER ? K_NO_WAIT :
CONN_UPDATE_TIMEOUT);
}
#if defined(CONFIG_BT_SMP)
static void update_pending_id(struct bt_keys *keys)
{
if (keys->flags & BT_KEYS_ID_PENDING_ADD) {
keys->flags &= ~BT_KEYS_ID_PENDING_ADD;
bt_id_add(keys);
return;
}
if (keys->flags & BT_KEYS_ID_PENDING_DEL) {
keys->flags &= ~BT_KEYS_ID_PENDING_DEL;
bt_id_del(keys);
return;
}
}
#endif
static void le_enh_conn_complete(struct bt_hci_evt_le_enh_conn_complete *evt)
{
u16_t handle = sys_le16_to_cpu(evt->handle);
bt_addr_le_t peer_addr, id_addr;
struct bt_conn *conn;
int err;
BT_DBG("status %u handle %u role %u %s", evt->status, handle,
evt->role, bt_addr_le_str(&evt->peer_addr));
#if defined(CONFIG_BT_SMP)
if (atomic_test_and_clear_bit(bt_dev.flags, BT_DEV_ID_PENDING)) {
bt_keys_foreach(BT_KEYS_IRK, update_pending_id);
}
#endif
if (evt->status) {
/*
* if there was an error we are only interested in pending
* connection so there is no need to check ID address as
* only one connection can be in that state
*
* Depending on error code address might not be valid anyway.
*/
conn = bt_conn_lookup_state_le(NULL, BT_CONN_CONNECT);
if (!conn) {
return;
}
conn->err = evt->status;
bt_conn_set_state(conn, BT_CONN_DISCONNECTED);
/* Drop the reference got by lookup call in CONNECT state.
* We are now in DISCONNECTED state since no successful LE
* link been made.
*/
bt_conn_unref(conn);
return;
}
bt_addr_le_copy(&id_addr, &evt->peer_addr);
/* Translate "enhanced" identity address type to normal one */
if (id_addr.type == BT_ADDR_LE_PUBLIC_ID ||
id_addr.type == BT_ADDR_LE_RANDOM_ID) {
id_addr.type -= BT_ADDR_LE_PUBLIC_ID;
bt_addr_copy(&peer_addr.a, &evt->peer_rpa);
peer_addr.type = BT_ADDR_LE_RANDOM;
} else {
bt_addr_le_copy(&peer_addr, &evt->peer_addr);
}
/*
* Make lookup to check if there's a connection object in
* CONNECT state associated with passed peer LE address.
*/
conn = bt_conn_lookup_state_le(&id_addr, BT_CONN_CONNECT);
if (evt->role == BT_CONN_ROLE_SLAVE) {
/*
* clear advertising even if we are not able to add connection
* object to keep host in sync with controller state
*/
atomic_clear_bit(bt_dev.flags, BT_DEV_ADVERTISING);
/* only for slave we may need to add new connection */
if (!conn) {
conn = bt_conn_add_le(&id_addr);
}
}
if (!conn) {
BT_ERR("Unable to add new conn for handle %u", handle);
return;
}
conn->handle = handle;
bt_addr_le_copy(&conn->le.dst, &id_addr);
conn->le.interval = sys_le16_to_cpu(evt->interval);
conn->le.latency = sys_le16_to_cpu(evt->latency);
conn->le.timeout = sys_le16_to_cpu(evt->supv_timeout);
conn->role = evt->role;
/*
* Use connection address (instead of identity address) as initiator
* or responder address. Only slave needs to be updated. For master all
* was set during outgoing connection creation.
*/
if (conn->role == BT_HCI_ROLE_SLAVE) {
bt_addr_le_copy(&conn->le.init_addr, &peer_addr);
if (IS_ENABLED(CONFIG_BT_PRIVACY)) {
bt_addr_copy(&conn->le.resp_addr.a, &evt->local_rpa);
conn->le.resp_addr.type = BT_ADDR_LE_RANDOM;
} else {
bt_addr_le_copy(&conn->le.resp_addr, &bt_dev.id_addr);
}
/* if the controller supports, lets advertise for another
* slave connection.
* check for connectable advertising state is sufficient as
* this is how this le connection complete for slave occurred.
*/
if (atomic_test_bit(bt_dev.flags, BT_DEV_KEEP_ADVERTISING) &&
BT_LE_STATES_SLAVE_CONN_ADV(bt_dev.le.states)) {
if (IS_ENABLED(CONFIG_BT_PRIVACY)) {
le_set_private_addr();
}
set_advertise_enable(true);
}
}
bt_conn_set_state(conn, BT_CONN_CONNECTED);
Bluetooth: Fix reading remote features after disconnect If connection was disconnected from connected callback there is no point in going with reading remote featurea and updating connection parameters because. > HCI Event: Command Status (0x0f) plen 4 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 76 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 7C:2F:80:94:97:39 (Gigaset Communications GmbH) Connection interval: 50.00 msec (0x0028) Connection latency: 0.00 msec (0x0000) Supervision timeout: 4000 msec (0x0190) Master clock accuracy: 0x00 < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 76 Reason: Remote User Terminated Connection (0x13) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Remote Used Features (0x08|0x0016) plen 2 Handle: 76 > HCI Event: Command Status (0x0f) plen 4 LE Read Remote Used Features (0x08|0x0016) ncmd 0 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 76 Reason: Connection Terminated By Local Host (0x16) > HCI Event: LE Meta Event (0x3e) plen 12 LE Read Remote Used Features (0x04) Status: Unknown Connection Identifier (0x02) Handle: 76 Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Change-Id: I1df211d429383406eda2d23eb1e5fec425ba3427 Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
2015-12-15 15:35:05 +01:00
/*
* it is possible that connection was disconnected directly from
* connected callback so we must check state before doing connection
* parameters update
*/
if (conn->state != BT_CONN_CONNECTED) {
goto done;
}
if ((evt->role == BT_HCI_ROLE_MASTER) ||
BT_FEAT_LE_SLAVE_FEATURE_XCHG(bt_dev.le.features)) {
err = hci_le_read_remote_features(conn);
if (!err) {
goto done;
}
}
if (BT_FEAT_LE_PHY_2M(bt_dev.le.features)) {
err = hci_le_set_phy(conn);
if (!err) {
atomic_set_bit(conn->flags, BT_CONN_AUTO_PHY_UPDATE);
goto done;
}
}
if (BT_FEAT_LE_DLE(bt_dev.le.features)) {
err = hci_le_set_data_len(conn);
if (!err) {
atomic_set_bit(conn->flags, BT_CONN_AUTO_DATA_LEN);
goto done;
}
}
update_conn_param(conn);
done:
bt_conn_unref(conn);
bt_le_scan_update(false);
}
static void le_legacy_conn_complete(struct net_buf *buf)
{
struct bt_hci_evt_le_conn_complete *evt = (void *)buf->data;
struct bt_hci_evt_le_enh_conn_complete enh;
const bt_addr_le_t *id_addr;
BT_DBG("status %u role %u %s", evt->status, evt->role,
bt_addr_le_str(&evt->peer_addr));
enh.status = evt->status;
enh.handle = evt->handle;
enh.role = evt->role;
enh.interval = evt->interval;
enh.latency = evt->latency;
enh.supv_timeout = evt->supv_timeout;
enh.clock_accuracy = evt->clock_accuracy;
bt_addr_le_copy(&enh.peer_addr, &evt->peer_addr);
if (IS_ENABLED(CONFIG_BT_PRIVACY)) {
bt_addr_copy(&enh.local_rpa, &bt_dev.random_addr.a);
} else {
bt_addr_copy(&enh.local_rpa, BT_ADDR_ANY);
}
id_addr = find_id_addr(&enh.peer_addr);
if (id_addr != &enh.peer_addr) {
bt_addr_copy(&enh.peer_rpa, &enh.peer_addr.a);
bt_addr_le_copy(&enh.peer_addr, id_addr);
enh.peer_addr.type += BT_ADDR_LE_PUBLIC_ID;
} else {
bt_addr_copy(&enh.peer_rpa, BT_ADDR_ANY);
}
le_enh_conn_complete(&enh);
}
static void le_remote_feat_complete(struct net_buf *buf)
{
struct bt_hci_evt_le_remote_feat_complete *evt = (void *)buf->data;
u16_t handle = sys_le16_to_cpu(evt->handle);
struct bt_conn *conn;
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to lookup conn for handle %u", handle);
return;
}
if (!evt->status) {
memcpy(conn->le.features, evt->features,
sizeof(conn->le.features));
}
if (BT_FEAT_LE_PHY_2M(bt_dev.le.features) &&
BT_FEAT_LE_PHY_2M(conn->le.features)) {
int err;
err = hci_le_set_phy(conn);
if (!err) {
atomic_set_bit(conn->flags, BT_CONN_AUTO_PHY_UPDATE);
goto done;
}
}
if (BT_FEAT_LE_DLE(bt_dev.le.features) &&
BT_FEAT_LE_DLE(conn->le.features)) {
int err;
err = hci_le_set_data_len(conn);
if (!err) {
atomic_set_bit(conn->flags, BT_CONN_AUTO_DATA_LEN);
goto done;
}
}
update_conn_param(conn);
done:
bt_conn_unref(conn);
}
static void le_data_len_change(struct net_buf *buf)
{
struct bt_hci_evt_le_data_len_change *evt = (void *)buf->data;
u16_t max_tx_octets = sys_le16_to_cpu(evt->max_tx_octets);
u16_t max_rx_octets = sys_le16_to_cpu(evt->max_rx_octets);
u16_t max_tx_time = sys_le16_to_cpu(evt->max_tx_time);
u16_t max_rx_time = sys_le16_to_cpu(evt->max_rx_time);
u16_t handle = sys_le16_to_cpu(evt->handle);
struct bt_conn *conn;
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to lookup conn for handle %u", handle);
return;
}
BT_DBG("max. tx: %u (%uus), max. rx: %u (%uus)", max_tx_octets,
max_tx_time, max_rx_octets, max_rx_time);
if (!atomic_test_and_clear_bit(conn->flags, BT_CONN_AUTO_DATA_LEN)) {
goto done;
}
update_conn_param(conn);
done:
bt_conn_unref(conn);
}
static void le_phy_update_complete(struct net_buf *buf)
{
struct bt_hci_evt_le_phy_update_complete *evt = (void *)buf->data;
u16_t handle = sys_le16_to_cpu(evt->handle);
struct bt_conn *conn;
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to lookup conn for handle %u", handle);
return;
}
BT_DBG("PHY updated: status: 0x%x, tx: %u, rx: %u",
evt->status, evt->tx_phy, evt->rx_phy);
if (!atomic_test_and_clear_bit(conn->flags, BT_CONN_AUTO_PHY_UPDATE)) {
goto done;
}
if (BT_FEAT_LE_DLE(bt_dev.le.features) &&
BT_FEAT_LE_DLE(conn->le.features)) {
int err;
err = hci_le_set_data_len(conn);
if (!err) {
atomic_set_bit(conn->flags, BT_CONN_AUTO_DATA_LEN);
goto done;
}
}
update_conn_param(conn);
done:
bt_conn_unref(conn);
}
bool bt_le_conn_params_valid(const struct bt_le_conn_param *param)
{
/* All limits according to BT Core spec 5.0 [Vol 2, Part E, 7.8.12] */
if (param->interval_min > param->interval_max ||
param->interval_min < 6 || param->interval_max > 3200) {
return false;
}
if (param->latency > 499) {
return false;
}
if (param->timeout < 10 || param->timeout > 3200 ||
((4 * param->timeout) <=
((1 + param->latency) * param->interval_max))) {
return false;
}
return true;
}
static int le_conn_param_neg_reply(u16_t handle, u8_t reason)
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
{
struct bt_hci_cp_le_conn_param_req_neg_reply *cp;
struct net_buf *buf;
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
buf = bt_hci_cmd_create(BT_HCI_OP_LE_CONN_PARAM_REQ_NEG_REPLY,
sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
cp->handle = sys_cpu_to_le16(handle);
cp->reason = sys_cpu_to_le16(reason);
return bt_hci_cmd_send(BT_HCI_OP_LE_CONN_PARAM_REQ_NEG_REPLY, buf);
}
static int le_conn_param_req_reply(u16_t handle,
const struct bt_le_conn_param *param)
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
{
struct bt_hci_cp_le_conn_param_req_reply *cp;
struct net_buf *buf;
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
buf = bt_hci_cmd_create(BT_HCI_OP_LE_CONN_PARAM_REQ_REPLY, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
memset(cp, 0, sizeof(*cp));
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
cp->handle = sys_cpu_to_le16(handle);
cp->interval_min = sys_cpu_to_le16(param->interval_min);
cp->interval_max = sys_cpu_to_le16(param->interval_max);
cp->latency = sys_cpu_to_le16(param->latency);
cp->timeout = sys_cpu_to_le16(param->timeout);
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
return bt_hci_cmd_send(BT_HCI_OP_LE_CONN_PARAM_REQ_REPLY, buf);
}
static int le_conn_param_req(struct net_buf *buf)
{
struct bt_hci_evt_le_conn_param_req *evt = (void *)buf->data;
struct bt_le_conn_param param;
struct bt_conn *conn;
u16_t handle;
int err;
handle = sys_le16_to_cpu(evt->handle);
param.interval_min = sys_le16_to_cpu(evt->interval_min);
param.interval_max = sys_le16_to_cpu(evt->interval_max);
param.latency = sys_le16_to_cpu(evt->latency);
param.timeout = sys_le16_to_cpu(evt->timeout);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to lookup conn for handle %u", handle);
return le_conn_param_neg_reply(handle,
BT_HCI_ERR_UNKNOWN_CONN_ID);
}
if (!le_param_req(conn, &param)) {
err = le_conn_param_neg_reply(handle,
BT_HCI_ERR_INVALID_LL_PARAM);
} else {
err = le_conn_param_req_reply(handle, &param);
}
bt_conn_unref(conn);
return err;
}
static void le_conn_update_complete(struct net_buf *buf)
{
struct bt_hci_evt_le_conn_update_complete *evt = (void *)buf->data;
struct bt_conn *conn;
u16_t handle;
handle = sys_le16_to_cpu(evt->handle);
BT_DBG("status %u, handle %u", evt->status, handle);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to lookup conn for handle %u", handle);
return;
}
if (!evt->status) {
conn->le.interval = sys_le16_to_cpu(evt->interval);
conn->le.latency = sys_le16_to_cpu(evt->latency);
conn->le.timeout = sys_le16_to_cpu(evt->supv_timeout);
notify_le_param_updated(conn);
}
bt_conn_unref(conn);
}
static void check_pending_conn(const bt_addr_le_t *id_addr,
const bt_addr_le_t *addr, u8_t evtype)
{
struct bt_conn *conn;
/* No connections are allowed during explicit scanning */
if (atomic_test_bit(bt_dev.flags, BT_DEV_EXPLICIT_SCAN)) {
return;
}
/* Return if event is not connectable */
if (evtype != BT_LE_ADV_IND && evtype != BT_LE_ADV_DIRECT_IND) {
return;
}
conn = bt_conn_lookup_state_le(id_addr, BT_CONN_CONNECT_SCAN);
if (!conn) {
return;
}
if (atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING) &&
set_le_scan_enable(BT_HCI_LE_SCAN_DISABLE)) {
goto failed;
}
if (IS_ENABLED(CONFIG_BT_PRIVACY)) {
if (le_set_private_addr()) {
goto failed;
}
bt_addr_le_copy(&conn->le.init_addr, &bt_dev.random_addr);
} else {
/* If Static Random address is used as Identity address we
* need to restore it before creating connection. Otherwise
* NRPA used for active scan could be used for connection.
*/
if (atomic_test_bit(bt_dev.flags, BT_DEV_ID_STATIC_RANDOM)) {
set_random_address(&bt_dev.id_addr.a);
}
bt_addr_le_copy(&conn->le.init_addr, &bt_dev.id_addr);
}
bt_addr_le_copy(&conn->le.resp_addr, addr);
if (hci_le_create_conn(conn)) {
goto failed;
}
bt_conn_set_state(conn, BT_CONN_CONNECT);
bt_conn_unref(conn);
return;
failed:
conn->err = BT_HCI_ERR_UNSPECIFIED;
bt_conn_set_state(conn, BT_CONN_DISCONNECTED);
bt_conn_unref(conn);
bt_le_scan_update(false);
}
#if defined(CONFIG_BT_HCI_ACL_FLOW_CONTROL)
static int set_flow_control(void)
{
struct bt_hci_cp_host_buffer_size *hbs;
struct net_buf *buf;
int err;
/* Check if host flow control is actually supported */
if (!(bt_dev.supported_commands[10] & 0x20)) {
BT_WARN("Controller to host flow control not supported");
return 0;
}
buf = bt_hci_cmd_create(BT_HCI_OP_HOST_BUFFER_SIZE,
sizeof(*hbs));
if (!buf) {
return -ENOBUFS;
}
hbs = net_buf_add(buf, sizeof(*hbs));
memset(hbs, 0, sizeof(*hbs));
hbs->acl_mtu = sys_cpu_to_le16(CONFIG_BT_L2CAP_RX_MTU +
sizeof(struct bt_l2cap_hdr));
hbs->acl_pkts = sys_cpu_to_le16(CONFIG_BT_ACL_RX_COUNT);
err = bt_hci_cmd_send_sync(BT_HCI_OP_HOST_BUFFER_SIZE, buf, NULL);
if (err) {
return err;
}
buf = bt_hci_cmd_create(BT_HCI_OP_SET_CTL_TO_HOST_FLOW, 1);
if (!buf) {
return -ENOBUFS;
}
net_buf_add_u8(buf, BT_HCI_CTL_TO_HOST_FLOW_ENABLE);
return bt_hci_cmd_send_sync(BT_HCI_OP_SET_CTL_TO_HOST_FLOW, buf, NULL);
}
#endif /* CONFIG_BT_HCI_ACL_FLOW_CONTROL */
static int bt_clear_all_pairings(void)
{
bt_conn_disconnect_all();
if (IS_ENABLED(CONFIG_BT_SMP)) {
bt_keys_clear_all();
}
if (IS_ENABLED(CONFIG_BT_BREDR)) {
bt_keys_link_key_clear_addr(NULL);
}
return 0;
}
int bt_unpair(const bt_addr_le_t *addr)
{
struct bt_conn *conn;
if (!addr || !bt_addr_le_cmp(addr, BT_ADDR_LE_ANY)) {
return bt_clear_all_pairings();
}
conn = bt_conn_lookup_addr_le(addr);
if (conn) {
bt_conn_disconnect(conn, BT_HCI_ERR_REMOTE_USER_TERM_CONN);
bt_conn_unref(conn);
}
if (IS_ENABLED(CONFIG_BT_BREDR)) {
/* LE Public may indicate BR/EDR as well */
if (addr->type == BT_ADDR_LE_PUBLIC) {
bt_keys_link_key_clear_addr(&addr->a);
}
}
if (IS_ENABLED(CONFIG_BT_SMP)) {
struct bt_keys *keys = bt_keys_find_addr(addr);
if (keys) {
bt_keys_clear(keys);
}
}
if (IS_ENABLED(CONFIG_BT_SETTINGS)) {
bt_gatt_clear_ccc(addr);
}
return 0;
}
#endif /* CONFIG_BT_CONN */
#if defined(CONFIG_BT_BREDR)
static void reset_pairing(struct bt_conn *conn)
{
atomic_clear_bit(conn->flags, BT_CONN_BR_PAIRING);
atomic_clear_bit(conn->flags, BT_CONN_BR_PAIRING_INITIATOR);
atomic_clear_bit(conn->flags, BT_CONN_BR_LEGACY_SECURE);
/* Reset required security level to current operational */
conn->required_sec_level = conn->sec_level;
}
static int reject_conn(const bt_addr_t *bdaddr, u8_t reason)
{
struct bt_hci_cp_reject_conn_req *cp;
struct net_buf *buf;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_REJECT_CONN_REQ, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, bdaddr);
cp->reason = reason;
err = bt_hci_cmd_send_sync(BT_HCI_OP_REJECT_CONN_REQ, buf, NULL);
if (err) {
return err;
}
return 0;
}
static int accept_sco_conn(const bt_addr_t *bdaddr, struct bt_conn *sco_conn)
{
struct bt_hci_cp_accept_sync_conn_req *cp;
struct net_buf *buf;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_ACCEPT_SYNC_CONN_REQ, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, bdaddr);
cp->pkt_type = sco_conn->sco.pkt_type;
cp->tx_bandwidth = 0x00001f40;
cp->rx_bandwidth = 0x00001f40;
cp->max_latency = 0x0007;
cp->retrans_effort = 0x01;
cp->content_format = BT_VOICE_CVSD_16BIT;
err = bt_hci_cmd_send_sync(BT_HCI_OP_ACCEPT_SYNC_CONN_REQ, buf, NULL);
if (err) {
return err;
}
return 0;
}
static int accept_conn(const bt_addr_t *bdaddr)
{
struct bt_hci_cp_accept_conn_req *cp;
struct net_buf *buf;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_ACCEPT_CONN_REQ, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, bdaddr);
cp->role = BT_HCI_ROLE_SLAVE;
err = bt_hci_cmd_send_sync(BT_HCI_OP_ACCEPT_CONN_REQ, buf, NULL);
if (err) {
return err;
}
return 0;
}
static void bt_esco_conn_req(struct bt_hci_evt_conn_request *evt)
{
struct bt_conn *sco_conn;
sco_conn = bt_conn_add_sco(&evt->bdaddr, evt->link_type);
if (!sco_conn) {
reject_conn(&evt->bdaddr, BT_HCI_ERR_INSUFFICIENT_RESOURCES);
return;
}
if (accept_sco_conn(&evt->bdaddr, sco_conn)) {
BT_ERR("Error accepting connection from %s",
bt_addr_str(&evt->bdaddr));
reject_conn(&evt->bdaddr, BT_HCI_ERR_UNSPECIFIED);
bt_sco_cleanup(sco_conn);
return;
}
sco_conn->role = BT_HCI_ROLE_SLAVE;
bt_conn_set_state(sco_conn, BT_CONN_CONNECT);
bt_conn_unref(sco_conn);
}
static void conn_req(struct net_buf *buf)
{
struct bt_hci_evt_conn_request *evt = (void *)buf->data;
struct bt_conn *conn;
BT_DBG("conn req from %s, type 0x%02x", bt_addr_str(&evt->bdaddr),
evt->link_type);
if (evt->link_type != BT_HCI_ACL) {
bt_esco_conn_req(evt);
return;
}
conn = bt_conn_add_br(&evt->bdaddr);
if (!conn) {
reject_conn(&evt->bdaddr, BT_HCI_ERR_INSUFFICIENT_RESOURCES);
return;
}
accept_conn(&evt->bdaddr);
conn->role = BT_HCI_ROLE_SLAVE;
bt_conn_set_state(conn, BT_CONN_CONNECT);
bt_conn_unref(conn);
}
static void update_sec_level_br(struct bt_conn *conn)
{
if (!conn->encrypt) {
conn->sec_level = BT_SECURITY_LOW;
return;
}
if (conn->br.link_key) {
if (conn->br.link_key->flags & BT_LINK_KEY_AUTHENTICATED) {
if (conn->encrypt == 0x02) {
conn->sec_level = BT_SECURITY_FIPS;
} else {
conn->sec_level = BT_SECURITY_HIGH;
}
} else {
conn->sec_level = BT_SECURITY_MEDIUM;
}
} else {
BT_WARN("No BR/EDR link key found");
conn->sec_level = BT_SECURITY_MEDIUM;
}
if (conn->required_sec_level > conn->sec_level) {
BT_ERR("Failed to set required security level");
bt_conn_disconnect(conn, BT_HCI_ERR_AUTHENTICATION_FAIL);
}
}
static void synchronous_conn_complete(struct net_buf *buf)
{
struct bt_hci_evt_sync_conn_complete *evt = (void *)buf->data;
struct bt_conn *sco_conn;
u16_t handle = sys_le16_to_cpu(evt->handle);
BT_DBG("status 0x%02x, handle %u, type 0x%02x", evt->status, handle,
evt->link_type);
sco_conn = bt_conn_lookup_addr_sco(&evt->bdaddr);
if (!sco_conn) {
BT_ERR("Unable to find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
if (evt->status) {
sco_conn->err = evt->status;
bt_conn_set_state(sco_conn, BT_CONN_DISCONNECTED);
bt_conn_unref(sco_conn);
return;
}
sco_conn->handle = handle;
bt_conn_set_state(sco_conn, BT_CONN_CONNECTED);
bt_conn_unref(sco_conn);
}
static void conn_complete(struct net_buf *buf)
{
struct bt_hci_evt_conn_complete *evt = (void *)buf->data;
struct bt_conn *conn;
struct bt_hci_cp_read_remote_features *cp;
u16_t handle = sys_le16_to_cpu(evt->handle);
BT_DBG("status 0x%02x, handle %u, type 0x%02x", evt->status, handle,
evt->link_type);
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Unable to find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
if (evt->status) {
conn->err = evt->status;
bt_conn_set_state(conn, BT_CONN_DISCONNECTED);
bt_conn_unref(conn);
return;
}
conn->handle = handle;
conn->encrypt = evt->encr_enabled;
update_sec_level_br(conn);
bt_conn_set_state(conn, BT_CONN_CONNECTED);
bt_conn_unref(conn);
buf = bt_hci_cmd_create(BT_HCI_OP_READ_REMOTE_FEATURES, sizeof(*cp));
if (!buf) {
return;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = evt->handle;
bt_hci_cmd_send_sync(BT_HCI_OP_READ_REMOTE_FEATURES, buf, NULL);
}
static void pin_code_req(struct net_buf *buf)
{
struct bt_hci_evt_pin_code_req *evt = (void *)buf->data;
struct bt_conn *conn;
BT_DBG("");
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
bt_conn_pin_code_req(conn);
bt_conn_unref(conn);
}
static void link_key_notify(struct net_buf *buf)
{
struct bt_hci_evt_link_key_notify *evt = (void *)buf->data;
struct bt_conn *conn;
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
BT_DBG("%s, link type 0x%02x", bt_addr_str(&evt->bdaddr), evt->key_type);
if (!conn->br.link_key) {
conn->br.link_key = bt_keys_get_link_key(&evt->bdaddr);
}
if (!conn->br.link_key) {
BT_ERR("Can't update keys for %s", bt_addr_str(&evt->bdaddr));
bt_conn_unref(conn);
return;
}
/* clear any old Link Key flags */
conn->br.link_key->flags = 0;
switch (evt->key_type) {
case BT_LK_COMBINATION:
/*
* Setting Combination Link Key as AUTHENTICATED means it was
* successfully generated by 16 digits wide PIN code.
*/
if (atomic_test_and_clear_bit(conn->flags,
BT_CONN_BR_LEGACY_SECURE)) {
conn->br.link_key->flags |= BT_LINK_KEY_AUTHENTICATED;
}
memcpy(conn->br.link_key->val, evt->link_key, 16);
break;
case BT_LK_AUTH_COMBINATION_P192:
conn->br.link_key->flags |= BT_LINK_KEY_AUTHENTICATED;
/* fall through */
case BT_LK_UNAUTH_COMBINATION_P192:
/* Mark no-bond so that link-key is removed on disconnection */
if (bt_conn_ssp_get_auth(conn) < BT_HCI_DEDICATED_BONDING) {
atomic_set_bit(conn->flags, BT_CONN_BR_NOBOND);
}
memcpy(conn->br.link_key->val, evt->link_key, 16);
break;
case BT_LK_AUTH_COMBINATION_P256:
conn->br.link_key->flags |= BT_LINK_KEY_AUTHENTICATED;
/* fall through */
case BT_LK_UNAUTH_COMBINATION_P256:
conn->br.link_key->flags |= BT_LINK_KEY_SC;
/* Mark no-bond so that link-key is removed on disconnection */
if (bt_conn_ssp_get_auth(conn) < BT_HCI_DEDICATED_BONDING) {
atomic_set_bit(conn->flags, BT_CONN_BR_NOBOND);
}
memcpy(conn->br.link_key->val, evt->link_key, 16);
break;
default:
BT_WARN("Unsupported Link Key type %u", evt->key_type);
memset(conn->br.link_key->val, 0,
sizeof(conn->br.link_key->val));
break;
}
bt_conn_unref(conn);
}
static void link_key_neg_reply(const bt_addr_t *bdaddr)
{
struct bt_hci_cp_link_key_neg_reply *cp;
struct net_buf *buf;
BT_DBG("");
buf = bt_hci_cmd_create(BT_HCI_OP_LINK_KEY_NEG_REPLY, sizeof(*cp));
if (!buf) {
BT_ERR("Out of command buffers");
return;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, bdaddr);
bt_hci_cmd_send_sync(BT_HCI_OP_LINK_KEY_NEG_REPLY, buf, NULL);
}
static void link_key_reply(const bt_addr_t *bdaddr, const u8_t *lk)
{
struct bt_hci_cp_link_key_reply *cp;
struct net_buf *buf;
BT_DBG("");
buf = bt_hci_cmd_create(BT_HCI_OP_LINK_KEY_REPLY, sizeof(*cp));
if (!buf) {
BT_ERR("Out of command buffers");
return;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, bdaddr);
memcpy(cp->link_key, lk, 16);
bt_hci_cmd_send_sync(BT_HCI_OP_LINK_KEY_REPLY, buf, NULL);
}
static void link_key_req(struct net_buf *buf)
{
struct bt_hci_evt_link_key_req *evt = (void *)buf->data;
struct bt_conn *conn;
BT_DBG("%s", bt_addr_str(&evt->bdaddr));
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
link_key_neg_reply(&evt->bdaddr);
return;
}
if (!conn->br.link_key) {
conn->br.link_key = bt_keys_find_link_key(&evt->bdaddr);
}
if (!conn->br.link_key) {
link_key_neg_reply(&evt->bdaddr);
bt_conn_unref(conn);
return;
}
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
/*
* Enforce regenerate by controller stronger link key since found one
* in database not covers requested security level.
*/
if (!(conn->br.link_key->flags & BT_LINK_KEY_AUTHENTICATED) &&
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
conn->required_sec_level > BT_SECURITY_MEDIUM) {
link_key_neg_reply(&evt->bdaddr);
bt_conn_unref(conn);
return;
}
link_key_reply(&evt->bdaddr, conn->br.link_key->val);
bt_conn_unref(conn);
}
static void io_capa_neg_reply(const bt_addr_t *bdaddr, const u8_t reason)
{
struct bt_hci_cp_io_capability_neg_reply *cp;
struct net_buf *resp_buf;
resp_buf = bt_hci_cmd_create(BT_HCI_OP_IO_CAPABILITY_NEG_REPLY,
sizeof(*cp));
if (!resp_buf) {
BT_ERR("Out of command buffers");
return;
}
cp = net_buf_add(resp_buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, bdaddr);
cp->reason = reason;
bt_hci_cmd_send_sync(BT_HCI_OP_IO_CAPABILITY_NEG_REPLY, resp_buf, NULL);
}
static void io_capa_resp(struct net_buf *buf)
{
struct bt_hci_evt_io_capa_resp *evt = (void *)buf->data;
struct bt_conn *conn;
BT_DBG("remote %s, IOcapa 0x%02x, auth 0x%02x",
bt_addr_str(&evt->bdaddr), evt->capability, evt->authentication);
if (evt->authentication > BT_HCI_GENERAL_BONDING_MITM) {
BT_ERR("Invalid remote authentication requirements");
io_capa_neg_reply(&evt->bdaddr,
BT_HCI_ERR_UNSUPP_FEATURE_PARAM_VAL);
return;
}
if (evt->capability > BT_IO_NO_INPUT_OUTPUT) {
BT_ERR("Invalid remote io capability requirements");
io_capa_neg_reply(&evt->bdaddr,
BT_HCI_ERR_UNSUPP_FEATURE_PARAM_VAL);
return;
}
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Unable to find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
conn->br.remote_io_capa = evt->capability;
conn->br.remote_auth = evt->authentication;
atomic_set_bit(conn->flags, BT_CONN_BR_PAIRING);
bt_conn_unref(conn);
}
static void io_capa_req(struct net_buf *buf)
{
struct bt_hci_evt_io_capa_req *evt = (void *)buf->data;
struct net_buf *resp_buf;
struct bt_conn *conn;
struct bt_hci_cp_io_capability_reply *cp;
u8_t auth;
BT_DBG("");
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
resp_buf = bt_hci_cmd_create(BT_HCI_OP_IO_CAPABILITY_REPLY,
sizeof(*cp));
if (!resp_buf) {
BT_ERR("Out of command buffers");
bt_conn_unref(conn);
return;
}
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
/*
* Set authentication requirements when acting as pairing initiator to
* 'dedicated bond' with MITM protection set if local IO capa
* potentially allows it, and for acceptor, based on local IO capa and
* remote's authentication set.
*/
if (atomic_test_bit(conn->flags, BT_CONN_BR_PAIRING_INITIATOR)) {
if (bt_conn_get_io_capa() != BT_IO_NO_INPUT_OUTPUT) {
auth = BT_HCI_DEDICATED_BONDING_MITM;
} else {
auth = BT_HCI_DEDICATED_BONDING;
}
} else {
auth = bt_conn_ssp_get_auth(conn);
}
cp = net_buf_add(resp_buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, &evt->bdaddr);
cp->capability = bt_conn_get_io_capa();
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
cp->authentication = auth;
cp->oob_data = 0;
bt_hci_cmd_send_sync(BT_HCI_OP_IO_CAPABILITY_REPLY, resp_buf, NULL);
bt_conn_unref(conn);
}
static void ssp_complete(struct net_buf *buf)
{
struct bt_hci_evt_ssp_complete *evt = (void *)buf->data;
struct bt_conn *conn;
BT_DBG("status %u", evt->status);
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
if (evt->status) {
bt_conn_disconnect(conn, BT_HCI_ERR_AUTHENTICATION_FAIL);
}
bt_conn_unref(conn);
}
static void user_confirm_req(struct net_buf *buf)
{
struct bt_hci_evt_user_confirm_req *evt = (void *)buf->data;
struct bt_conn *conn;
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
bt_conn_ssp_auth(conn, sys_le32_to_cpu(evt->passkey));
bt_conn_unref(conn);
}
Bluetooth: BR/EDR: Handle User Passkey Notify event To allow remote, typically a keyboard, input on its side common passkey during SSP authentication, enable generated passkey value by local controller to be notified to user interface if available. > HCI Event: IO Capability Response (0x32) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: KeyboardOnly (0x02) OOB data: Authentication data not present (0x00) Authentication: No Bonding - MITM required (0x01) > HCI Event: IO Capability Request (0x31) plen 6 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: DisplayYesNo (0x01) OOB data: Authentication data not present (0x00) Authentication: No Bonding - MITM required (0x01) > HCI Event: Command Complete (0x0e) plen 10 IO Capability Request Reply (0x01|0x002b) ncmd 1 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: User Passkey Notification (0x3b) plen 10 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Passkey: 831705 > HCI Event: Simple Pairing Complete (0x36) plen 7 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Link key: 1a8d1c80409c4466b3423ca2bb761cf4 Key type: Authenticated Combination key from P-192 (0x05) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 11 Encryption: Enabled with E0 (0x01) Change-Id: I1e8ad5d75181ceb9c93576b9e9b93975d9cdf35b Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-02-24 14:47:01 +01:00
static void user_passkey_notify(struct net_buf *buf)
{
struct bt_hci_evt_user_passkey_notify *evt = (void *)buf->data;
struct bt_conn *conn;
BT_DBG("");
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
bt_conn_ssp_auth(conn, sys_le32_to_cpu(evt->passkey));
bt_conn_unref(conn);
}
Bluetooth: BR/EDR: Handle User Passkey Entry event Enables handle request from remote to enter passkey by the user to continue SSP authentication process. It happens when local device supports 'keyboard only' functionality. Otherwise the response is negative. > HCI Event: IO Capability Response (0x32) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: DisplayOnly (0x00) OOB data: Authentication data not present (0x00) Authentication: Dedicated Bonding - MITM required (0x03) > HCI Event: IO Capability Request (0x31) plen 6 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: KeyboardOnly (0x02) OOB data: Authentication data not present (0x00) Authentication: Dedicated Bonding - MITM required (0x03) > HCI Event: Command Complete (0x0e) plen 10 IO Capability Request Reply (0x01|0x002b) ncmd 1 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: User Passkey Request (0x34) plen 6 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) < HCI Command: User Passkey Request Reply (0x01|0x002e) plen 10 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Passkey: 599207 > HCI Event: Command Complete (0x0e) plen 10 User Passkey Request Reply (0x01|0x002e) ncmd 1 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: Simple Pairing Complete (0x36) plen 7 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Link key: 560e9c31d700ae5576af83d1e079e911 Key type: Authenticated Combination key from P-192 (0x05) Change-Id: Ia15517519b326eede29bc8e71edb7ec6ca77e010 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-02-24 14:58:03 +01:00
static void user_passkey_req(struct net_buf *buf)
{
struct bt_hci_evt_user_passkey_req *evt = (void *)buf->data;
struct bt_conn *conn;
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
bt_conn_ssp_auth(conn, 0);
bt_conn_unref(conn);
}
struct discovery_priv {
u16_t clock_offset;
u8_t pscan_rep_mode;
u8_t resolving;
} __packed;
static int request_name(const bt_addr_t *addr, u8_t pscan, u16_t offset)
{
struct bt_hci_cp_remote_name_request *cp;
struct net_buf *buf;
buf = bt_hci_cmd_create(BT_HCI_OP_REMOTE_NAME_REQUEST, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, addr);
cp->pscan_rep_mode = pscan;
cp->reserved = 0x00; /* reserver, should be set to 0x00 */
cp->clock_offset = offset;
return bt_hci_cmd_send_sync(BT_HCI_OP_REMOTE_NAME_REQUEST, buf, NULL);
}
#define EIR_SHORT_NAME 0x08
#define EIR_COMPLETE_NAME 0x09
static bool eir_has_name(const u8_t *eir)
{
int len = 240;
while (len) {
if (len < 2) {
break;
};
/* Look for early termination */
if (!eir[0]) {
break;
}
/* Check if field length is correct */
if (eir[0] > len - 1) {
break;
}
switch (eir[1]) {
case EIR_SHORT_NAME:
case EIR_COMPLETE_NAME:
if (eir[0] > 1) {
return true;
}
break;
default:
break;
}
/* Parse next AD Structure */
len -= eir[0] + 1;
eir += eir[0] + 1;
}
return false;
}
static void report_discovery_results(void)
{
bool resolving_names = false;
int i;
for (i = 0; i < discovery_results_count; i++) {
struct discovery_priv *priv;
priv = (struct discovery_priv *)&discovery_results[i]._priv;
if (eir_has_name(discovery_results[i].eir)) {
continue;
}
if (request_name(&discovery_results[i].addr,
priv->pscan_rep_mode, priv->clock_offset)) {
continue;
}
priv->resolving = 1;
resolving_names = true;
}
if (resolving_names) {
return;
}
atomic_clear_bit(bt_dev.flags, BT_DEV_INQUIRY);
discovery_cb(discovery_results, discovery_results_count);
discovery_cb = NULL;
discovery_results = NULL;
discovery_results_size = 0;
discovery_results_count = 0;
}
static void inquiry_complete(struct net_buf *buf)
{
struct bt_hci_evt_inquiry_complete *evt = (void *)buf->data;
if (evt->status) {
BT_ERR("Failed to complete inquiry");
}
report_discovery_results();
}
static struct bt_br_discovery_result *get_result_slot(const bt_addr_t *addr,
s8_t rssi)
{
struct bt_br_discovery_result *result = NULL;
size_t i;
/* check if already present in results */
for (i = 0; i < discovery_results_count; i++) {
if (!bt_addr_cmp(addr, &discovery_results[i].addr)) {
return &discovery_results[i];
}
}
/* Pick a new slot (if available) */
if (discovery_results_count < discovery_results_size) {
bt_addr_copy(&discovery_results[discovery_results_count].addr,
addr);
return &discovery_results[discovery_results_count++];
}
/* ignore if invalid RSSI */
if (rssi == 0xff) {
return NULL;
}
/*
* Pick slot with smallest RSSI that is smaller then passed RSSI
* TODO handle TX if present
*/
for (i = 0; i < discovery_results_size; i++) {
if (discovery_results[i].rssi > rssi) {
continue;
}
if (!result || result->rssi > discovery_results[i].rssi) {
result = &discovery_results[i];
}
}
if (result) {
BT_DBG("Reusing slot (old %s rssi %d dBm)",
bt_addr_str(&result->addr), result->rssi);
bt_addr_copy(&result->addr, addr);
}
return result;
}
static void inquiry_result_with_rssi(struct net_buf *buf)
{
struct bt_hci_evt_inquiry_result_with_rssi *evt;
u8_t num_reports = net_buf_pull_u8(buf);
if (!atomic_test_bit(bt_dev.flags, BT_DEV_INQUIRY)) {
return;
}
BT_DBG("number of results: %u", num_reports);
evt = (void *)buf->data;
while (num_reports--) {
struct bt_br_discovery_result *result;
struct discovery_priv *priv;
BT_DBG("%s rssi %d dBm", bt_addr_str(&evt->addr), evt->rssi);
result = get_result_slot(&evt->addr, evt->rssi);
if (!result) {
return;
}
priv = (struct discovery_priv *)&result->_priv;
priv->pscan_rep_mode = evt->pscan_rep_mode;
priv->clock_offset = evt->clock_offset;
memcpy(result->cod, evt->cod, 3);
result->rssi = evt->rssi;
/* we could reuse slot so make sure EIR is cleared */
memset(result->eir, 0, sizeof(result->eir));
/*
* Get next report iteration by moving pointer to right offset
* in buf according to spec 4.2, Vol 2, Part E, 7.7.33.
*/
evt = net_buf_pull(buf, sizeof(*evt));
}
}
static void extended_inquiry_result(struct net_buf *buf)
{
struct bt_hci_evt_extended_inquiry_result *evt = (void *)buf->data;
struct bt_br_discovery_result *result;
struct discovery_priv *priv;
if (!atomic_test_bit(bt_dev.flags, BT_DEV_INQUIRY)) {
return;
}
BT_DBG("%s rssi %d dBm", bt_addr_str(&evt->addr), evt->rssi);
result = get_result_slot(&evt->addr, evt->rssi);
if (!result) {
return;
}
priv = (struct discovery_priv *)&result->_priv;
priv->pscan_rep_mode = evt->pscan_rep_mode;
priv->clock_offset = evt->clock_offset;
result->rssi = evt->rssi;
memcpy(result->cod, evt->cod, 3);
memcpy(result->eir, evt->eir, sizeof(result->eir));
}
static void remote_name_request_complete(struct net_buf *buf)
{
struct bt_hci_evt_remote_name_req_complete *evt = (void *)buf->data;
struct bt_br_discovery_result *result;
struct discovery_priv *priv;
int eir_len = 240;
u8_t *eir;
int i;
result = get_result_slot(&evt->bdaddr, 0xff);
if (!result) {
return;
}
priv = (struct discovery_priv *)&result->_priv;
priv->resolving = 0;
if (evt->status) {
goto check_names;
}
eir = result->eir;
while (eir_len) {
if (eir_len < 2) {
break;
};
/* Look for early termination */
if (!eir[0]) {
size_t name_len;
eir_len -= 2;
/* name is null terminated */
Bluetooth: Fix compiler warnings/errors related to string casts Fix the following compiler warnings/errors that show up with llvm: tests/bluetooth/shell/src/main.c:594:2: error: initializing 'const uint8_t *' (aka 'const unsigned char *') with an expression of type 'char [11]' converts between pointers to integer types with different sign [-Werror,-Wpointer-sign] BT_DATA(BT_DATA_NAME_COMPLETE, DEVICE_NAME, DEVICE_NAME_LEN), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/bluetooth/bluetooth.h:93:11: note: expanded from macro 'BT_DATA' .data = (_data), \ ^~~~~~~ 1 error generated. net/bluetooth/hci_core.c:1759:22: error: passing 'uint8_t [248]' to parameter of type 'const char *' converts between pointers to integer types with different sign [-Werror,-Wpointer-sign] name_len = strlen(evt->name); ^~~~~~~~~ lib/libc/minimal/include/string.h:32:34: note: passing argument to parameter 's' here extern size_t strlen(const char *s); ^ CC net/bluetooth/log.o net/bluetooth/hci_core.c:3136:10: error: passing 'uint8_t [248]' to parameter of type 'char *' converts between pointers to integer types with different sign [-Werror,-Wpointer-sign] strncpy(name_cp->local_name, CONFIG_BLUETOOTH_BREDR_NAME, ^~~~~~~~~~~~~~~~~~~ lib/libc/minimal/include/string.h:30:39: note: passing argument to parameter 'd' here extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n); net/bluetooth/conn.c:301:10: error: passing 'uint8_t [16]' to parameter of type 'char *' converts between pointers to integer types with different sign [-Werror,-Wpointer-sign] strncpy(cp->pin_code, pin, sizeof(cp->pin_code)); ^~~~~~~~~~~~ lib/libc/minimal/include/string.h:30:39: note: passing argument to parameter 'd' here extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n); Change-Id: I342131c6c2b25445382b2317d673561c4087096b Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-10-04 10:21:42 +03:00
name_len = strlen((const char *)evt->name);
if (name_len > eir_len) {
eir[0] = eir_len + 1;
eir[1] = EIR_SHORT_NAME;
} else {
eir[0] = name_len + 1;
eir[1] = EIR_SHORT_NAME;
}
memcpy(&eir[2], evt->name, eir[0] - 1);
break;
}
/* Check if field length is correct */
if (eir[0] > eir_len - 1) {
break;
}
/* next EIR Structure */
eir_len -= eir[0] + 1;
eir += eir[0] + 1;
}
check_names:
/* if still waiting for names */
for (i = 0; i < discovery_results_count; i++) {
struct discovery_priv *priv;
priv = (struct discovery_priv *)&discovery_results[i]._priv;
if (priv->resolving) {
return;
}
}
/* all names resolved, report discovery results */
atomic_clear_bit(bt_dev.flags, BT_DEV_INQUIRY);
discovery_cb(discovery_results, discovery_results_count);
discovery_cb = NULL;
discovery_results = NULL;
discovery_results_size = 0;
discovery_results_count = 0;
}
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
static void link_encr(const u16_t handle)
{
struct bt_hci_cp_set_conn_encrypt *encr;
struct net_buf *buf;
BT_DBG("");
buf = bt_hci_cmd_create(BT_HCI_OP_SET_CONN_ENCRYPT, sizeof(*encr));
if (!buf) {
BT_ERR("Out of command buffers");
return;
}
encr = net_buf_add(buf, sizeof(*encr));
encr->handle = sys_cpu_to_le16(handle);
encr->encrypt = 0x01;
bt_hci_cmd_send_sync(BT_HCI_OP_SET_CONN_ENCRYPT, buf, NULL);
}
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
static void auth_complete(struct net_buf *buf)
{
struct bt_hci_evt_auth_complete *evt = (void *)buf->data;
struct bt_conn *conn;
u16_t handle = sys_le16_to_cpu(evt->handle);
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
BT_DBG("status %u, handle %u", evt->status, handle);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Can't find conn for handle %u", handle);
return;
}
if (evt->status) {
if (conn->state == BT_CONN_CONNECTED) {
/*
* Inform layers above HCI about non-zero authentication
* status to make them able cleanup pending jobs.
*/
bt_l2cap_encrypt_change(conn, evt->status);
}
reset_pairing(conn);
} else {
link_encr(handle);
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
}
bt_conn_unref(conn);
}
static void read_remote_features_complete(struct net_buf *buf)
{
struct bt_hci_evt_remote_features *evt = (void *)buf->data;
u16_t handle = sys_le16_to_cpu(evt->handle);
struct bt_hci_cp_read_remote_ext_features *cp;
struct bt_conn *conn;
BT_DBG("status %u handle %u", evt->status, handle);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Can't find conn for handle %u", handle);
return;
}
if (evt->status) {
goto done;
}
memcpy(conn->br.features[0], evt->features, sizeof(evt->features));
if (!BT_FEAT_EXT_FEATURES(conn->br.features)) {
goto done;
}
buf = bt_hci_cmd_create(BT_HCI_OP_READ_REMOTE_EXT_FEATURES,
sizeof(*cp));
if (!buf) {
goto done;
}
/* Read remote host features (page 1) */
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = evt->handle;
cp->page = 0x01;
bt_hci_cmd_send_sync(BT_HCI_OP_READ_REMOTE_EXT_FEATURES, buf, NULL);
done:
bt_conn_unref(conn);
}
static void read_remote_ext_features_complete(struct net_buf *buf)
{
struct bt_hci_evt_remote_ext_features *evt = (void *)buf->data;
u16_t handle = sys_le16_to_cpu(evt->handle);
struct bt_conn *conn;
BT_DBG("status %u handle %u", evt->status, handle);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Can't find conn for handle %u", handle);
return;
}
if (!evt->status && evt->page == 0x01) {
memcpy(conn->br.features[1], evt->features,
sizeof(conn->br.features[1]));
}
bt_conn_unref(conn);
}
static void role_change(struct net_buf *buf)
{
struct bt_hci_evt_role_change *evt = (void *)buf->data;
struct bt_conn *conn;
BT_DBG("status %u role %u addr %s", evt->status, evt->role,
bt_addr_str(&evt->bdaddr));
if (evt->status) {
return;
}
conn = bt_conn_lookup_addr_br(&evt->bdaddr);
if (!conn) {
BT_ERR("Can't find conn for %s", bt_addr_str(&evt->bdaddr));
return;
}
if (evt->role) {
conn->role = BT_CONN_ROLE_SLAVE;
} else {
conn->role = BT_CONN_ROLE_MASTER;
}
bt_conn_unref(conn);
}
#endif /* CONFIG_BT_BREDR */
#if defined(CONFIG_BT_SMP)
static int le_set_privacy_mode(const bt_addr_le_t *addr, u8_t mode)
{
struct bt_hci_cp_le_set_privacy_mode cp;
struct net_buf *buf;
int err;
/* Check if set privacy mode command is supported */
if (!BT_CMD_TEST(bt_dev.supported_commands, 39, 2)) {
BT_WARN("Set privacy mode command is not supported");
return 0;
}
BT_DBG("addr %s mode 0x%02x", bt_addr_le_str(addr), mode);
bt_addr_le_copy(&cp.id_addr, addr);
cp.mode = mode;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_PRIVACY_MODE, sizeof(cp));
if (!buf) {
return -ENOBUFS;
}
net_buf_add_mem(buf, &cp, sizeof(cp));
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_PRIVACY_MODE, buf, NULL);
if (err) {
return err;
}
return 0;
}
static int addr_res_enable(u8_t enable)
{
struct net_buf *buf;
BT_DBG("%s", enable ? "enabled" : "disabled");
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADDR_RES_ENABLE, 1);
if (!buf) {
return -ENOBUFS;
}
net_buf_add_u8(buf, enable);
return bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_ADDR_RES_ENABLE,
buf, NULL);
}
static int hci_id_add(const bt_addr_le_t *addr, u8_t val[16])
{
struct bt_hci_cp_le_add_dev_to_rl *cp;
struct net_buf *buf;
BT_DBG("addr %s", bt_addr_le_str(addr));
buf = bt_hci_cmd_create(BT_HCI_OP_LE_ADD_DEV_TO_RL, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_le_copy(&cp->peer_id_addr, addr);
memcpy(cp->peer_irk, val, 16);
#if defined(CONFIG_BT_PRIVACY)
memcpy(cp->local_irk, bt_dev.irk, 16);
#else
memset(cp->local_irk, 0, 16);
#endif
return bt_hci_cmd_send_sync(BT_HCI_OP_LE_ADD_DEV_TO_RL, buf, NULL);
}
int bt_id_add(struct bt_keys *keys)
{
bool adv_enabled, scan_enabled;
struct bt_conn *conn;
int err;
BT_DBG("addr %s", bt_addr_le_str(&keys->addr));
/* Nothing to be done if host-side resolving is used */
if (!bt_dev.le.rl_size || bt_dev.le.rl_entries > bt_dev.le.rl_size) {
bt_dev.le.rl_entries++;
return 0;
}
conn = bt_conn_lookup_state_le(NULL, BT_CONN_CONNECT);
if (conn) {
atomic_set_bit(bt_dev.flags, BT_DEV_ID_PENDING);
keys->flags |= BT_KEYS_ID_PENDING_ADD;
bt_conn_unref(conn);
return -EAGAIN;
}
adv_enabled = atomic_test_bit(bt_dev.flags, BT_DEV_ADVERTISING);
if (adv_enabled) {
set_advertise_enable(false);
}
scan_enabled = atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING);
if (scan_enabled) {
set_le_scan_enable(BT_HCI_LE_SCAN_DISABLE);
}
/* If there are any existing entries address resolution will be on */
if (bt_dev.le.rl_entries) {
err = addr_res_enable(BT_HCI_ADDR_RES_DISABLE);
if (err) {
BT_WARN("Failed to disable address resolution");
goto done;
}
}
if (bt_dev.le.rl_entries == bt_dev.le.rl_size) {
BT_WARN("Resolving list size exceeded. Switching to host.");
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_CLEAR_RL, NULL, NULL);
if (err) {
BT_ERR("Failed to clear resolution list");
goto done;
}
bt_dev.le.rl_entries++;
goto done;
}
err = hci_id_add(&keys->addr, keys->irk.val);
if (err) {
BT_ERR("Failed to add IRK to controller");
goto done;
}
bt_dev.le.rl_entries++;
/*
* According to Core Spec. 5.0 Vol 1, Part A 5.4.5 Privacy Feature
*
* By default, network privacy mode is used when private addresses are
* resolved and generated by the Controller, so advertising packets from
* peer devices that contain private addresses will only be accepted.
* By changing to the device privacy mode device is only concerned about
* its privacy and will accept advertising packets from peer devices
* that contain their identity address as well as ones that contain
* a private address, even if the peer device has distributed its IRK in
* the past.
*/
err = le_set_privacy_mode(&keys->addr, BT_HCI_LE_PRIVACY_MODE_DEVICE);
if (err) {
BT_ERR("Failed to set privacy mode");
goto done;
}
done:
addr_res_enable(BT_HCI_ADDR_RES_ENABLE);
if (scan_enabled) {
set_le_scan_enable(BT_HCI_LE_SCAN_ENABLE);
}
if (adv_enabled) {
set_advertise_enable(true);
}
return err;
}
static void keys_add_id(struct bt_keys *keys)
{
hci_id_add(&keys->addr, keys->irk.val);
}
int bt_id_del(struct bt_keys *keys)
{
struct bt_hci_cp_le_rem_dev_from_rl *cp;
bool adv_enabled, scan_enabled;
struct bt_conn *conn;
struct net_buf *buf;
int err;
BT_DBG("addr %s", bt_addr_le_str(&keys->addr));
if (!bt_dev.le.rl_size ||
bt_dev.le.rl_entries > bt_dev.le.rl_size + 1) {
bt_dev.le.rl_entries--;
return 0;
}
conn = bt_conn_lookup_state_le(NULL, BT_CONN_CONNECT);
if (conn) {
atomic_set_bit(bt_dev.flags, BT_DEV_ID_PENDING);
keys->flags |= BT_KEYS_ID_PENDING_DEL;
bt_conn_unref(conn);
return -EAGAIN;
}
adv_enabled = atomic_test_bit(bt_dev.flags, BT_DEV_ADVERTISING);
if (adv_enabled) {
set_advertise_enable(false);
}
scan_enabled = atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING);
if (scan_enabled) {
set_le_scan_enable(BT_HCI_LE_SCAN_DISABLE);
}
err = addr_res_enable(BT_HCI_ADDR_RES_DISABLE);
if (err) {
BT_ERR("Disabling address resolution failed (err %d)", err);
goto done;
}
/* We checked size + 1 earlier, so here we know we can fit again */
if (bt_dev.le.rl_entries > bt_dev.le.rl_size) {
bt_dev.le.rl_entries--;
keys->keys &= ~BT_KEYS_IRK;
bt_keys_foreach(BT_KEYS_IRK, keys_add_id);
goto done;
}
buf = bt_hci_cmd_create(BT_HCI_OP_LE_REM_DEV_FROM_RL, sizeof(*cp));
if (!buf) {
err = -ENOBUFS;
goto done;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_le_copy(&cp->peer_id_addr, &keys->addr);
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_REM_DEV_FROM_RL, buf, NULL);
if (err) {
BT_ERR("Failed to remove IRK from controller");
goto done;
}
bt_dev.le.rl_entries--;
done:
/* Only re-enable if there are entries to do resolving with */
if (bt_dev.le.rl_entries) {
addr_res_enable(BT_HCI_ADDR_RES_ENABLE);
}
if (scan_enabled) {
set_le_scan_enable(BT_HCI_LE_SCAN_ENABLE);
}
if (adv_enabled) {
set_advertise_enable(true);
}
return err;
}
static void update_sec_level(struct bt_conn *conn)
{
if (!conn->encrypt) {
conn->sec_level = BT_SECURITY_LOW;
return;
}
if (conn->le.keys && (conn->le.keys->flags & BT_KEYS_AUTHENTICATED)) {
if (conn->le.keys->keys & BT_KEYS_LTK_P256) {
conn->sec_level = BT_SECURITY_FIPS;
} else {
conn->sec_level = BT_SECURITY_HIGH;
}
} else {
conn->sec_level = BT_SECURITY_MEDIUM;
}
if (conn->required_sec_level > conn->sec_level) {
BT_ERR("Failed to set required security level");
bt_conn_disconnect(conn, BT_HCI_ERR_AUTHENTICATION_FAIL);
}
}
#endif /* CONFIG_BT_SMP */
#if defined(CONFIG_BT_SMP) || defined(CONFIG_BT_BREDR)
static void hci_encrypt_change(struct net_buf *buf)
{
struct bt_hci_evt_encrypt_change *evt = (void *)buf->data;
u16_t handle = sys_le16_to_cpu(evt->handle);
struct bt_conn *conn;
BT_DBG("status %u handle %u encrypt 0x%02x", evt->status, handle,
evt->encrypt);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to look up conn with handle %u", handle);
return;
}
if (evt->status) {
/* TODO report error */
if (conn->type == BT_CONN_TYPE_LE) {
/* reset required security level in case of error */
conn->required_sec_level = conn->sec_level;
#if defined(CONFIG_BT_BREDR)
} else {
bt_l2cap_encrypt_change(conn, evt->status);
reset_pairing(conn);
#endif /* CONFIG_BT_BREDR */
}
bt_conn_unref(conn);
return;
}
conn->encrypt = evt->encrypt;
#if defined(CONFIG_BT_SMP)
if (conn->type == BT_CONN_TYPE_LE) {
/*
* we update keys properties only on successful encryption to
* avoid losing valid keys if encryption was not successful.
*
* Update keys with last pairing info for proper sec level
* update. This is done only for LE transport, for BR/EDR keys
* are updated on HCI 'Link Key Notification Event'
*/
if (conn->encrypt) {
bt_smp_update_keys(conn);
}
update_sec_level(conn);
}
#endif /* CONFIG_BT_SMP */
#if defined(CONFIG_BT_BREDR)
if (conn->type == BT_CONN_TYPE_BR) {
update_sec_level_br(conn);
if (IS_ENABLED(CONFIG_BT_SMP)) {
/*
* Start SMP over BR/EDR if we are pairing and are
* master on the link
*/
if (atomic_test_bit(conn->flags, BT_CONN_BR_PAIRING) &&
conn->role == BT_CONN_ROLE_MASTER) {
bt_smp_br_send_pairing_req(conn);
}
}
reset_pairing(conn);
}
#endif /* CONFIG_BT_BREDR */
bt_l2cap_encrypt_change(conn, evt->status);
bt_conn_security_changed(conn);
bt_conn_unref(conn);
}
static void hci_encrypt_key_refresh_complete(struct net_buf *buf)
{
struct bt_hci_evt_encrypt_key_refresh_complete *evt = (void *)buf->data;
struct bt_conn *conn;
u16_t handle;
handle = sys_le16_to_cpu(evt->handle);
BT_DBG("status %u handle %u", evt->status, handle);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to look up conn with handle %u", handle);
return;
}
if (evt->status) {
bt_l2cap_encrypt_change(conn, evt->status);
return;
}
/*
* Update keys with last pairing info for proper sec level update.
* This is done only for LE transport. For BR/EDR transport keys are
* updated on HCI 'Link Key Notification Event', therefore update here
* only security level based on available keys and encryption state.
*/
#if defined(CONFIG_BT_SMP)
if (conn->type == BT_CONN_TYPE_LE) {
bt_smp_update_keys(conn);
update_sec_level(conn);
}
#endif /* CONFIG_BT_SMP */
#if defined(CONFIG_BT_BREDR)
if (conn->type == BT_CONN_TYPE_BR) {
update_sec_level_br(conn);
}
#endif /* CONFIG_BT_BREDR */
bt_l2cap_encrypt_change(conn, evt->status);
bt_conn_security_changed(conn);
bt_conn_unref(conn);
}
#endif /* CONFIG_BT_SMP || CONFIG_BT_BREDR */
#if defined(CONFIG_BT_SMP)
static void le_ltk_neg_reply(u16_t handle)
{
struct bt_hci_cp_le_ltk_req_neg_reply *cp;
struct net_buf *buf;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_LTK_REQ_NEG_REPLY, sizeof(*cp));
if (!buf) {
BT_ERR("Out of command buffers");
return;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = handle;
bt_hci_cmd_send(BT_HCI_OP_LE_LTK_REQ_NEG_REPLY, buf);
}
static void le_ltk_request(struct net_buf *buf)
{
struct bt_hci_evt_le_ltk_request *evt = (void *)buf->data;
struct bt_hci_cp_le_ltk_req_reply *cp;
struct bt_conn *conn;
u16_t handle;
u8_t tk[16];
handle = sys_le16_to_cpu(evt->handle);
BT_DBG("handle %u", handle);
conn = bt_conn_lookup_handle(handle);
if (!conn) {
BT_ERR("Unable to lookup conn for handle %u", handle);
return;
}
/*
* if TK is present use it, that means pairing is in progress and
* we should use new TK for encryption
*
* Both legacy STK and LE SC LTK have rand and ediv equal to zero.
*/
if (evt->rand == 0 && evt->ediv == 0 && bt_smp_get_tk(conn, tk)) {
buf = bt_hci_cmd_create(BT_HCI_OP_LE_LTK_REQ_REPLY,
sizeof(*cp));
if (!buf) {
BT_ERR("Out of command buffers");
goto done;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = evt->handle;
memcpy(cp->ltk, tk, sizeof(cp->ltk));
bt_hci_cmd_send(BT_HCI_OP_LE_LTK_REQ_REPLY, buf);
goto done;
}
if (!conn->le.keys) {
conn->le.keys = bt_keys_find(BT_KEYS_LTK_P256, &conn->le.dst);
if (!conn->le.keys) {
conn->le.keys = bt_keys_find(BT_KEYS_SLAVE_LTK,
&conn->le.dst);
}
}
if (conn->le.keys && (conn->le.keys->keys & BT_KEYS_LTK_P256) &&
evt->rand == 0 && evt->ediv == 0) {
buf = bt_hci_cmd_create(BT_HCI_OP_LE_LTK_REQ_REPLY,
sizeof(*cp));
if (!buf) {
BT_ERR("Out of command buffers");
goto done;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = evt->handle;
/* use only enc_size bytes of key for encryption */
memcpy(cp->ltk, conn->le.keys->ltk.val,
conn->le.keys->enc_size);
if (conn->le.keys->enc_size < sizeof(cp->ltk)) {
memset(cp->ltk + conn->le.keys->enc_size, 0,
sizeof(cp->ltk) - conn->le.keys->enc_size);
}
bt_hci_cmd_send(BT_HCI_OP_LE_LTK_REQ_REPLY, buf);
goto done;
}
#if !defined(CONFIG_BT_SMP_SC_ONLY)
if (conn->le.keys && (conn->le.keys->keys & BT_KEYS_SLAVE_LTK) &&
!memcmp(conn->le.keys->slave_ltk.rand, &evt->rand, 8) &&
conn->le.keys->slave_ltk.ediv == evt->ediv) {
buf = bt_hci_cmd_create(BT_HCI_OP_LE_LTK_REQ_REPLY,
sizeof(*cp));
if (!buf) {
BT_ERR("Out of command buffers");
goto done;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->handle = evt->handle;
Bluetooth: SMP: Add support for encryption key size reduction This allows to pair with devices that use reduced encryption key size. Encryption key size is stored with keys for future use. LTKs are kept in full form (16 bytes) and are reduced only when used. As master: < ACL Data TX: Handle 64 flags 0x00 dlen 11 SMP: Pairing Request (0x01) len 6 IO capability: NoInputNoOutput (0x03) OOB data: Authentication data not present (0x00) Authentication requirement: Bonding, No MITM, Legacy, No Keypresses (0x01) Max encryption key size: 16 Initiator key distribution: EncKey Sign (0x05) Responder key distribution: EncKey IdKey Sign (0x07) > ACL Data RX: Handle 64 flags 0x02 dlen 11 SMP: Pairing Response (0x02) len 6 IO capability: KeyboardDisplay (0x04) OOB data: Authentication data not present (0x00) Authentication requirement: No bonding, No MITM, Legacy, No Keypresses (0x00) Max encryption key size: 7 Initiator key distribution: <none> (0x00) Responder key distribution: <none> (0x00) ... < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 64 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: df3cff52a981d6000000000000000000 As slave: > ACL Data RX: Handle 64 flags 0x02 dlen 11 SMP: Pairing Request (0x01) len 6 IO capability: KeyboardDisplay (0x04) OOB data: Authentication data not present (0x00) Authentication requirement: No bonding, No MITM, Legacy, No Keypresses (0x00) Max encryption key size: 7 Initiator key distribution: <none> (0x00) Responder key distribution: <none> (0x00) < ACL Data TX: Handle 64 flags 0x00 dlen 11 SMP: Pairing Response (0x02) len 6 IO capability: NoInputNoOutput (0x03) OOB data: Authentication data not present (0x00) Authentication requirement: No bonding, No MITM, Legacy, No Keypresses (0x00) Max encryption key size: 16 Initiator key distribution: <none> (0x00) Responder key distribution: <none> (0x00) ... > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 701b431a9e17bb000000000000000000 Change-Id: Ibc70aa01c040aff0d39410d273d6880d35aa5ae0 Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
2015-10-07 12:33:45 +02:00
/* use only enc_size bytes of key for encryption */
memcpy(cp->ltk, conn->le.keys->slave_ltk.val,
conn->le.keys->enc_size);
if (conn->le.keys->enc_size < sizeof(cp->ltk)) {
memset(cp->ltk + conn->le.keys->enc_size, 0,
sizeof(cp->ltk) - conn->le.keys->enc_size);
Bluetooth: SMP: Add support for encryption key size reduction This allows to pair with devices that use reduced encryption key size. Encryption key size is stored with keys for future use. LTKs are kept in full form (16 bytes) and are reduced only when used. As master: < ACL Data TX: Handle 64 flags 0x00 dlen 11 SMP: Pairing Request (0x01) len 6 IO capability: NoInputNoOutput (0x03) OOB data: Authentication data not present (0x00) Authentication requirement: Bonding, No MITM, Legacy, No Keypresses (0x01) Max encryption key size: 16 Initiator key distribution: EncKey Sign (0x05) Responder key distribution: EncKey IdKey Sign (0x07) > ACL Data RX: Handle 64 flags 0x02 dlen 11 SMP: Pairing Response (0x02) len 6 IO capability: KeyboardDisplay (0x04) OOB data: Authentication data not present (0x00) Authentication requirement: No bonding, No MITM, Legacy, No Keypresses (0x00) Max encryption key size: 7 Initiator key distribution: <none> (0x00) Responder key distribution: <none> (0x00) ... < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 64 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: df3cff52a981d6000000000000000000 As slave: > ACL Data RX: Handle 64 flags 0x02 dlen 11 SMP: Pairing Request (0x01) len 6 IO capability: KeyboardDisplay (0x04) OOB data: Authentication data not present (0x00) Authentication requirement: No bonding, No MITM, Legacy, No Keypresses (0x00) Max encryption key size: 7 Initiator key distribution: <none> (0x00) Responder key distribution: <none> (0x00) < ACL Data TX: Handle 64 flags 0x00 dlen 11 SMP: Pairing Response (0x02) len 6 IO capability: NoInputNoOutput (0x03) OOB data: Authentication data not present (0x00) Authentication requirement: No bonding, No MITM, Legacy, No Keypresses (0x00) Max encryption key size: 16 Initiator key distribution: <none> (0x00) Responder key distribution: <none> (0x00) ... > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 701b431a9e17bb000000000000000000 Change-Id: Ibc70aa01c040aff0d39410d273d6880d35aa5ae0 Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
2015-10-07 12:33:45 +02:00
}
bt_hci_cmd_send(BT_HCI_OP_LE_LTK_REQ_REPLY, buf);
goto done;
}
#endif /* !CONFIG_BT_SMP_SC_ONLY */
le_ltk_neg_reply(evt->handle);
done:
bt_conn_unref(conn);
}
#endif /* CONFIG_BT_SMP */
static void le_pkey_complete(struct net_buf *buf)
{
struct bt_hci_evt_le_p256_public_key_complete *evt = (void *)buf->data;
struct bt_pub_key_cb *cb;
BT_DBG("status: 0x%x", evt->status);
atomic_clear_bit(bt_dev.flags, BT_DEV_PUB_KEY_BUSY);
if (!evt->status) {
memcpy(pub_key, evt->key, 64);
atomic_set_bit(bt_dev.flags, BT_DEV_HAS_PUB_KEY);
}
for (cb = pub_key_cb; cb; cb = cb->_next) {
cb->func(evt->status ? NULL : evt->key);
}
}
static void le_dhkey_complete(struct net_buf *buf)
{
struct bt_hci_evt_le_generate_dhkey_complete *evt = (void *)buf->data;
BT_DBG("status: 0x%x", evt->status);
if (dh_key_cb) {
dh_key_cb(evt->status ? NULL : evt->dhkey);
dh_key_cb = NULL;
}
}
static void hci_reset_complete(struct net_buf *buf)
{
u8_t status = buf->data[0];
atomic_t flags;
BT_DBG("status %u", status);
if (status) {
return;
}
scan_dev_found_cb = NULL;
#if defined(CONFIG_BT_BREDR)
discovery_cb = NULL;
discovery_results = NULL;
discovery_results_size = 0;
discovery_results_count = 0;
#endif /* CONFIG_BT_BREDR */
flags = (atomic_get(bt_dev.flags) & BT_DEV_PERSISTENT_FLAGS);
atomic_set(bt_dev.flags, flags);
}
static void hci_cmd_done(u16_t opcode, u8_t status, struct net_buf *buf)
{
BT_DBG("opcode 0x%04x status 0x%02x buf %p", opcode, status, buf);
if (net_buf_pool_get(buf->pool_id) != &hci_cmd_pool) {
BT_WARN("opcode 0x%04x pool id %u pool %p != &hci_cmd_pool %p",
opcode, buf->pool_id, net_buf_pool_get(buf->pool_id),
&hci_cmd_pool);
return;
}
if (cmd(buf)->opcode != opcode) {
BT_WARN("OpCode 0x%04x completed instead of expected 0x%04x",
opcode, cmd(buf)->opcode);
}
/* If the command was synchronous wake up bt_hci_cmd_send_sync() */
if (cmd(buf)->sync) {
cmd(buf)->status = status;
k_sem_give(cmd(buf)->sync);
}
}
static void hci_cmd_complete(struct net_buf *buf)
{
struct bt_hci_evt_cmd_complete *evt = (void *)buf->data;
u16_t opcode = sys_le16_to_cpu(evt->opcode);
u8_t status, ncmd = evt->ncmd;
BT_DBG("opcode 0x%04x", opcode);
net_buf_pull(buf, sizeof(*evt));
/* All command return parameters have a 1-byte status in the
* beginning, so we can safely make this generalization.
*/
status = buf->data[0];
hci_cmd_done(opcode, status, buf);
/* Allow next command to be sent */
if (ncmd) {
k_sem_give(&bt_dev.ncmd_sem);
}
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
}
static void hci_cmd_status(struct net_buf *buf)
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
{
struct bt_hci_evt_cmd_status *evt = (void *)buf->data;
u16_t opcode = sys_le16_to_cpu(evt->opcode);
u8_t ncmd = evt->ncmd;
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
BT_DBG("opcode 0x%04x", opcode);
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
net_buf_pull(buf, sizeof(*evt));
hci_cmd_done(opcode, evt->status, buf);
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
/* Allow next command to be sent */
if (ncmd) {
k_sem_give(&bt_dev.ncmd_sem);
}
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
}
static int start_le_scan(u8_t scan_type, u16_t interval, u16_t window)
{
struct bt_hci_cp_le_set_scan_param set_param;
struct net_buf *buf;
int err;
memset(&set_param, 0, sizeof(set_param));
set_param.scan_type = scan_type;
/* for the rest parameters apply default values according to
* spec 4.2, vol2, part E, 7.8.10
*/
set_param.interval = sys_cpu_to_le16(interval);
set_param.window = sys_cpu_to_le16(window);
set_param.filter_policy = 0x00;
if (IS_ENABLED(CONFIG_BT_PRIVACY)) {
err = le_set_private_addr();
if (err) {
return err;
}
if (BT_FEAT_LE_PRIVACY(bt_dev.le.features)) {
set_param.addr_type = BT_HCI_OWN_ADDR_RPA_OR_RANDOM;
} else {
set_param.addr_type = BT_ADDR_LE_RANDOM;
}
} else {
set_param.addr_type = bt_dev.id_addr.type;
/* Use NRPA unless identity has been explicitly requested
* (through Kconfig), or if there is no advertising ongoing.
*/
if (!IS_ENABLED(CONFIG_BT_SCAN_WITH_IDENTITY) &&
scan_type == BT_HCI_LE_SCAN_ACTIVE &&
!atomic_test_bit(bt_dev.flags, BT_DEV_ADVERTISING)) {
err = le_set_private_addr();
if (err) {
return err;
}
set_param.addr_type = BT_ADDR_LE_RANDOM;
}
}
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_PARAM, sizeof(set_param));
if (!buf) {
return -ENOBUFS;
}
net_buf_add_mem(buf, &set_param, sizeof(set_param));
bt_hci_cmd_send(BT_HCI_OP_LE_SET_SCAN_PARAM, buf);
err = set_le_scan_enable(BT_HCI_LE_SCAN_ENABLE);
if (err) {
return err;
}
if (scan_type == BT_HCI_LE_SCAN_ACTIVE) {
atomic_set_bit(bt_dev.flags, BT_DEV_ACTIVE_SCAN);
} else {
atomic_clear_bit(bt_dev.flags, BT_DEV_ACTIVE_SCAN);
}
return 0;
}
int bt_le_scan_update(bool fast_scan)
{
if (atomic_test_bit(bt_dev.flags, BT_DEV_EXPLICIT_SCAN)) {
return 0;
}
if (atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING)) {
int err;
err = set_le_scan_enable(BT_HCI_LE_SCAN_DISABLE);
if (err) {
return err;
}
}
if (IS_ENABLED(CONFIG_BT_CENTRAL)) {
u16_t interval, window;
struct bt_conn *conn;
conn = bt_conn_lookup_state_le(NULL, BT_CONN_CONNECT_SCAN);
if (!conn) {
return 0;
}
atomic_set_bit(bt_dev.flags, BT_DEV_SCAN_FILTER_DUP);
bt_conn_unref(conn);
if (fast_scan) {
interval = BT_GAP_SCAN_FAST_INTERVAL;
window = BT_GAP_SCAN_FAST_WINDOW;
} else {
interval = BT_GAP_SCAN_SLOW_INTERVAL_1;
window = BT_GAP_SCAN_SLOW_WINDOW_1;
}
return start_le_scan(BT_HCI_LE_SCAN_PASSIVE, interval, window);
}
return 0;
}
static void le_adv_report(struct net_buf *buf)
{
u8_t num_reports = net_buf_pull_u8(buf);
struct bt_hci_evt_le_advertising_info *info;
BT_DBG("Adv number of reports %u", num_reports);
while (num_reports--) {
bt_addr_le_t id_addr;
s8_t rssi;
info = (void *)buf->data;
net_buf_pull(buf, sizeof(*info));
rssi = info->data[info->length];
BT_DBG("%s event %u, len %u, rssi %d dBm",
bt_addr_le_str(&info->addr),
info->evt_type, info->length, rssi);
if (info->addr.type == BT_ADDR_LE_PUBLIC_ID ||
info->addr.type == BT_ADDR_LE_RANDOM_ID) {
bt_addr_le_copy(&id_addr, &info->addr);
id_addr.type -= BT_ADDR_LE_PUBLIC_ID;
} else {
bt_addr_le_copy(&id_addr, find_id_addr(&info->addr));
}
if (scan_dev_found_cb) {
struct net_buf_simple_state state;
net_buf_simple_save(&buf->b, &state);
buf->len = info->length;
scan_dev_found_cb(&id_addr, rssi, info->evt_type,
&buf->b);
net_buf_simple_restore(&buf->b, &state);
}
#if defined(CONFIG_BT_CONN)
check_pending_conn(&id_addr, &info->addr, info->evt_type);
#endif /* CONFIG_BT_CONN */
/* Get next report iteration by moving pointer to right offset
* in buf according to spec 4.2, Vol 2, Part E, 7.7.65.2.
*/
net_buf_pull(buf, info->length + sizeof(rssi));
}
}
static void hci_le_meta_event(struct net_buf *buf)
{
struct bt_hci_evt_le_meta_event *evt = (void *)buf->data;
BT_DBG("subevent 0x%02x", evt->subevent);
net_buf_pull(buf, sizeof(*evt));
switch (evt->subevent) {
#if defined(CONFIG_BT_CONN)
case BT_HCI_EVT_LE_CONN_COMPLETE:
le_legacy_conn_complete(buf);
break;
case BT_HCI_EVT_LE_ENH_CONN_COMPLETE:
le_enh_conn_complete((void *)buf->data);
break;
case BT_HCI_EVT_LE_CONN_UPDATE_COMPLETE:
le_conn_update_complete(buf);
break;
case BT_HCI_EV_LE_REMOTE_FEAT_COMPLETE:
le_remote_feat_complete(buf);
break;
Bluetooth: Handle LE Remote Connection Parameters Request Event Adds Remote Connection Parameter Request Event handler and command response handlers to support LL Connection Parameter Update procedure (BT 4.1). < HCI Command: LE Connection Update (0x08|0x0013) plen 14 [hci1] 86319.053586 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.625 msec (0x0001) Max connection length: 0.625 msec (0x0001) > HCI Event: Command Status (0x0f) plen 4 [hci1] 86319.053597 LE Connection Update (0x08|0x0013) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 11 [hci0] 86319.053600 LE Remote Connection Parameter Request (0x06) Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) ... < HCI Command: LE Remote Connection Parameter Request Reply (0x08|0x0020) plen 14 [hci0] 86319.055663 Handle: 42 Min connection interval: 38.75 msec (0x001f) Max connection interval: 58.75 msec (0x002f) Connection latency: 0x0000 Supervision timeout: 32000 msec (0x0c80) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Complete (0x0e) plen 6 [hci0] 86319.055687 LE Remote Connection Parameter Request Reply (0x08|0x0020) ncmd 1 Status: Success (0x00) Handle: 42 > HCI Event: LE Meta Event (0x3e) plen 10 [hci1] 86319.055694 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) > HCI Event: LE Meta Event (0x3e) plen 10 [hci0] 86319.055692 LE Connection Update Complete (0x03) Status: Success (0x00) Handle: 42 Connection interval: 38.75 msec (0x001f) Connection latency: 0.00 msec (0x0000) Supervision timeout: 32000 msec (0x0c80) Change-Id: Ief5d7bd404ce476e48a4d66983a03928d9db11d0 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
2015-08-10 22:23:05 +02:00
case BT_HCI_EVT_LE_CONN_PARAM_REQ:
le_conn_param_req(buf);
break;
case BT_HCI_EVT_LE_DATA_LEN_CHANGE:
le_data_len_change(buf);
break;
case BT_HCI_EVT_LE_PHY_UPDATE_COMPLETE:
le_phy_update_complete(buf);
break;
#endif /* CONFIG_BT_CONN */
#if defined(CONFIG_BT_SMP)
case BT_HCI_EVT_LE_LTK_REQUEST:
le_ltk_request(buf);
break;
#endif /* CONFIG_BT_SMP */
case BT_HCI_EVT_LE_P256_PUBLIC_KEY_COMPLETE:
le_pkey_complete(buf);
break;
case BT_HCI_EVT_LE_GENERATE_DHKEY_COMPLETE:
le_dhkey_complete(buf);
break;
case BT_HCI_EVT_LE_ADVERTISING_REPORT:
le_adv_report(buf);
break;
default:
BT_WARN("Unhandled LE event 0x%02x len %u: %s",
evt->subevent, buf->len, bt_hex(buf->data, buf->len));
break;
}
}
static void hci_event(struct net_buf *buf)
{
struct bt_hci_evt_hdr *hdr = (void *)buf->data;
BT_DBG("event 0x%02x", hdr->evt);
BT_ASSERT(!bt_hci_evt_is_prio(hdr->evt));
net_buf_pull(buf, sizeof(*hdr));
switch (hdr->evt) {
#if defined(CONFIG_BT_BREDR)
case BT_HCI_EVT_CONN_REQUEST:
conn_req(buf);
break;
case BT_HCI_EVT_CONN_COMPLETE:
conn_complete(buf);
break;
case BT_HCI_EVT_PIN_CODE_REQ:
pin_code_req(buf);
break;
case BT_HCI_EVT_LINK_KEY_NOTIFY:
link_key_notify(buf);
break;
case BT_HCI_EVT_LINK_KEY_REQ:
link_key_req(buf);
break;
case BT_HCI_EVT_IO_CAPA_RESP:
io_capa_resp(buf);
break;
case BT_HCI_EVT_IO_CAPA_REQ:
io_capa_req(buf);
break;
case BT_HCI_EVT_SSP_COMPLETE:
ssp_complete(buf);
break;
case BT_HCI_EVT_USER_CONFIRM_REQ:
user_confirm_req(buf);
break;
Bluetooth: BR/EDR: Handle User Passkey Notify event To allow remote, typically a keyboard, input on its side common passkey during SSP authentication, enable generated passkey value by local controller to be notified to user interface if available. > HCI Event: IO Capability Response (0x32) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: KeyboardOnly (0x02) OOB data: Authentication data not present (0x00) Authentication: No Bonding - MITM required (0x01) > HCI Event: IO Capability Request (0x31) plen 6 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: DisplayYesNo (0x01) OOB data: Authentication data not present (0x00) Authentication: No Bonding - MITM required (0x01) > HCI Event: Command Complete (0x0e) plen 10 IO Capability Request Reply (0x01|0x002b) ncmd 1 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: User Passkey Notification (0x3b) plen 10 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Passkey: 831705 > HCI Event: Simple Pairing Complete (0x36) plen 7 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Link key: 1a8d1c80409c4466b3423ca2bb761cf4 Key type: Authenticated Combination key from P-192 (0x05) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 11 Encryption: Enabled with E0 (0x01) Change-Id: I1e8ad5d75181ceb9c93576b9e9b93975d9cdf35b Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-02-24 14:47:01 +01:00
case BT_HCI_EVT_USER_PASSKEY_NOTIFY:
user_passkey_notify(buf);
break;
Bluetooth: BR/EDR: Handle User Passkey Entry event Enables handle request from remote to enter passkey by the user to continue SSP authentication process. It happens when local device supports 'keyboard only' functionality. Otherwise the response is negative. > HCI Event: IO Capability Response (0x32) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: DisplayOnly (0x00) OOB data: Authentication data not present (0x00) Authentication: Dedicated Bonding - MITM required (0x03) > HCI Event: IO Capability Request (0x31) plen 6 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) IO capability: KeyboardOnly (0x02) OOB data: Authentication data not present (0x00) Authentication: Dedicated Bonding - MITM required (0x03) > HCI Event: Command Complete (0x0e) plen 10 IO Capability Request Reply (0x01|0x002b) ncmd 1 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: User Passkey Request (0x34) plen 6 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) < HCI Command: User Passkey Request Reply (0x01|0x002e) plen 10 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Passkey: 599207 > HCI Event: Command Complete (0x0e) plen 10 User Passkey Request Reply (0x01|0x002e) ncmd 1 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: Simple Pairing Complete (0x36) plen 7 Status: Success (0x00) Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd) Link key: 560e9c31d700ae5576af83d1e079e911 Key type: Authenticated Combination key from P-192 (0x05) Change-Id: Ia15517519b326eede29bc8e71edb7ec6ca77e010 Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-02-24 14:58:03 +01:00
case BT_HCI_EVT_USER_PASSKEY_REQ:
user_passkey_req(buf);
break;
case BT_HCI_EVT_INQUIRY_COMPLETE:
inquiry_complete(buf);
break;
case BT_HCI_EVT_INQUIRY_RESULT_WITH_RSSI:
inquiry_result_with_rssi(buf);
break;
case BT_HCI_EVT_EXTENDED_INQUIRY_RESULT:
extended_inquiry_result(buf);
break;
case BT_HCI_EVT_REMOTE_NAME_REQ_COMPLETE:
remote_name_request_complete(buf);
break;
Bluetooth: BR/EDR: Initiate authentication Enables initiate authentication using possibility to change security level on link by calling internal security API. In case of failure resets pairing state flag to re-enable change security on subsequent authentication attempts. To verify the process of authentication run BT shell app from tests/bluetooth/shell folder and use commands like below: >br-connect xx:xx:xx:xx:xx:xx [Connected: xx:xx:xx:xx:xx:xx] >security 1 HCI log: > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 11 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Authentication Requested (0x01|0x0011) plen 2 Handle: 11 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: PIN Code Request (0x16) plen 6 Address: 00:13:17:72:8D:87 (GN Netcom A/S) < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) PIN length: 4 PIN code: 0000 > HCI Event: Command Complete (0x0e) plen 10 PIN Code Request Reply (0x01|0x000d) ncmd 1 Status: Success (0x00) Address: 00:13:17:72:8D:87 (GN Netcom A/S) > HCI Event: Link Key Notification (0x18) plen 23 Address: 00:13:17:72:8D:87 (GN Netcom A/S) Link key: d9ff76c09284c1ed369851f87d7ac623 Key type: Combination key (0x00) > HCI Event: Auth Complete (0x06) plen 3 Status: Success (0x00) Handle: 11 Change-Id: I2d383d34e19c04ead3fa254e5514d5c7f352a21e Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
2016-03-18 14:13:23 +01:00
case BT_HCI_EVT_AUTH_COMPLETE:
auth_complete(buf);
break;
case BT_HCI_EVT_REMOTE_FEATURES:
read_remote_features_complete(buf);
break;
case BT_HCI_EVT_REMOTE_EXT_FEATURES:
read_remote_ext_features_complete(buf);
break;
case BT_HCI_EVT_ROLE_CHANGE:
role_change(buf);
break;
case BT_HCI_EVT_SYNC_CONN_COMPLETE:
synchronous_conn_complete(buf);
break;
#endif
#if defined(CONFIG_BT_CONN)
case BT_HCI_EVT_DISCONN_COMPLETE:
hci_disconn_complete(buf);
break;
#endif /* CONFIG_BT_CONN */
#if defined(CONFIG_BT_SMP) || defined(CONFIG_BT_BREDR)
case BT_HCI_EVT_ENCRYPT_CHANGE:
hci_encrypt_change(buf);
break;
case BT_HCI_EVT_ENCRYPT_KEY_REFRESH_COMPLETE:
hci_encrypt_key_refresh_complete(buf);
break;
#endif /* CONFIG_BT_SMP || CONFIG_BT_BREDR */
case BT_HCI_EVT_LE_META_EVENT:
hci_le_meta_event(buf);
break;
default:
BT_WARN("Unhandled event 0x%02x len %u: %s", hdr->evt,
buf->len, bt_hex(buf->data, buf->len));
break;
}
net_buf_unref(buf);
}
static void send_cmd(void)
{
struct net_buf *buf;
int err;
/* Get next command */
BT_DBG("calling net_buf_get");
buf = net_buf_get(&bt_dev.cmd_tx_queue, K_NO_WAIT);
BT_ASSERT(buf);
/* Wait until ncmd > 0 */
BT_DBG("calling sem_take_wait");
k_sem_take(&bt_dev.ncmd_sem, K_FOREVER);
/* Clear out any existing sent command */
if (bt_dev.sent_cmd) {
BT_ERR("Uncleared pending sent_cmd");
net_buf_unref(bt_dev.sent_cmd);
bt_dev.sent_cmd = NULL;
}
bt_dev.sent_cmd = net_buf_ref(buf);
BT_DBG("Sending command 0x%04x (buf %p) to driver",
cmd(buf)->opcode, buf);
err = bt_send(buf);
if (err) {
BT_ERR("Unable to send to driver (err %d)", err);
k_sem_give(&bt_dev.ncmd_sem);
hci_cmd_done(cmd(buf)->opcode, BT_HCI_ERR_UNSPECIFIED,
NULL);
net_buf_unref(bt_dev.sent_cmd);
bt_dev.sent_cmd = NULL;
net_buf_unref(buf);
}
}
static void process_events(struct k_poll_event *ev, int count)
{
BT_DBG("count %d", count);
for (; count; ev++, count--) {
BT_DBG("ev->state %u", ev->state);
switch (ev->state) {
case K_POLL_STATE_SIGNALED:
break;
case K_POLL_STATE_FIFO_DATA_AVAILABLE:
if (ev->tag == BT_EVENT_CMD_TX) {
send_cmd();
} else if (IS_ENABLED(CONFIG_BT_CONN)) {
struct bt_conn *conn;
if (ev->tag == BT_EVENT_CONN_TX_NOTIFY) {
conn = CONTAINER_OF(ev->fifo,
struct bt_conn,
tx_notify);
bt_conn_notify_tx(conn);
} else if (ev->tag == BT_EVENT_CONN_TX_QUEUE) {
conn = CONTAINER_OF(ev->fifo,
struct bt_conn,
tx_queue);
bt_conn_process_tx(conn);
}
}
break;
case K_POLL_STATE_NOT_READY:
break;
default:
BT_WARN("Unexpected k_poll event state %u", ev->state);
break;
}
}
}
#if defined(CONFIG_BT_CONN)
/* command FIFO + conn_change signal + MAX_CONN * 2 (tx & tx_notify) */
#define EV_COUNT (2 + (CONFIG_BT_MAX_CONN * 2))
#else
/* command FIFO */
#define EV_COUNT 1
#endif
static void hci_tx_thread(void *p1, void *p2, void *p3)
{
static struct k_poll_event events[EV_COUNT] = {
K_POLL_EVENT_STATIC_INITIALIZER(K_POLL_TYPE_FIFO_DATA_AVAILABLE,
K_POLL_MODE_NOTIFY_ONLY,
&bt_dev.cmd_tx_queue,
BT_EVENT_CMD_TX),
};
BT_DBG("Started");
while (1) {
int ev_count, err;
events[0].state = K_POLL_STATE_NOT_READY;
ev_count = 1;
if (IS_ENABLED(CONFIG_BT_CONN)) {
ev_count += bt_conn_prepare_events(&events[1]);
}
BT_DBG("Calling k_poll with %d events", ev_count);
err = k_poll(events, ev_count, K_FOREVER);
BT_ASSERT(err == 0);
process_events(events, ev_count);
/* Make sure we don't hog the CPU if there's all the time
* some ready events.
*/
k_yield();
}
}
static void read_local_ver_complete(struct net_buf *buf)
{
struct bt_hci_rp_read_local_version_info *rp = (void *)buf->data;
BT_DBG("status %u", rp->status);
bt_dev.hci_version = rp->hci_version;
bt_dev.hci_revision = sys_le16_to_cpu(rp->hci_revision);
bt_dev.lmp_version = rp->lmp_version;
bt_dev.lmp_subversion = sys_le16_to_cpu(rp->lmp_subversion);
bt_dev.manufacturer = sys_le16_to_cpu(rp->manufacturer);
}
static void read_bdaddr_complete(struct net_buf *buf)
{
struct bt_hci_rp_read_bd_addr *rp = (void *)buf->data;
BT_DBG("status %u", rp->status);
bt_addr_copy(&bt_dev.id_addr.a, &rp->bdaddr);
bt_dev.id_addr.type = BT_ADDR_LE_PUBLIC;
}
static void read_le_features_complete(struct net_buf *buf)
{
struct bt_hci_rp_le_read_local_features *rp = (void *)buf->data;
BT_DBG("status %u", rp->status);
memcpy(bt_dev.le.features, rp->features, sizeof(bt_dev.le.features));
}
#if defined(CONFIG_BT_BREDR)
static void read_buffer_size_complete(struct net_buf *buf)
{
struct bt_hci_rp_read_buffer_size *rp = (void *)buf->data;
u16_t pkts;
BT_DBG("status %u", rp->status);
bt_dev.br.mtu = sys_le16_to_cpu(rp->acl_max_len);
pkts = sys_le16_to_cpu(rp->acl_max_num);
BT_DBG("ACL BR/EDR buffers: pkts %u mtu %u", pkts, bt_dev.br.mtu);
k_sem_init(&bt_dev.br.pkts, pkts, pkts);
}
#elif defined(CONFIG_BT_CONN)
static void read_buffer_size_complete(struct net_buf *buf)
{
struct bt_hci_rp_read_buffer_size *rp = (void *)buf->data;
u16_t pkts;
BT_DBG("status %u", rp->status);
/* If LE-side has buffers we can ignore the BR/EDR values */
if (bt_dev.le.mtu) {
return;
}
bt_dev.le.mtu = sys_le16_to_cpu(rp->acl_max_len);
pkts = sys_le16_to_cpu(rp->acl_max_num);
BT_DBG("ACL BR/EDR buffers: pkts %u mtu %u", pkts, bt_dev.le.mtu);
pkts = min(pkts, CONFIG_BT_CONN_TX_MAX);
k_sem_init(&bt_dev.le.pkts, pkts, pkts);
}
#endif
#if defined(CONFIG_BT_CONN)
static void le_read_buffer_size_complete(struct net_buf *buf)
{
struct bt_hci_rp_le_read_buffer_size *rp = (void *)buf->data;
u8_t le_max_num;
BT_DBG("status %u", rp->status);
bt_dev.le.mtu = sys_le16_to_cpu(rp->le_max_len);
if (!bt_dev.le.mtu) {
return;
}
BT_DBG("ACL LE buffers: pkts %u mtu %u", rp->le_max_num, bt_dev.le.mtu);
le_max_num = min(rp->le_max_num, CONFIG_BT_CONN_TX_MAX);
k_sem_init(&bt_dev.le.pkts, le_max_num, le_max_num);
}
#endif
static void read_supported_commands_complete(struct net_buf *buf)
{
struct bt_hci_rp_read_supported_commands *rp = (void *)buf->data;
BT_DBG("status %u", rp->status);
memcpy(bt_dev.supported_commands, rp->commands,
sizeof(bt_dev.supported_commands));
/*
* Report "LE Read Local P-256 Public Key" and "LE Generate DH Key" as
* supported if TinyCrypt ECC is used for emulation.
*/
if (IS_ENABLED(CONFIG_BT_TINYCRYPT_ECC)) {
bt_dev.supported_commands[34] |= 0x02;
bt_dev.supported_commands[34] |= 0x04;
}
}
static void read_local_features_complete(struct net_buf *buf)
{
struct bt_hci_rp_read_local_features *rp = (void *)buf->data;
BT_DBG("status %u", rp->status);
memcpy(bt_dev.features[0], rp->features, sizeof(bt_dev.features[0]));
}
static void le_read_supp_states_complete(struct net_buf *buf)
{
struct bt_hci_rp_le_read_supp_states *rp = (void *)buf->data;
BT_DBG("status %u", rp->status);
bt_dev.le.states = sys_get_le64(rp->le_states);
}
static int common_init(void)
{
struct net_buf *rsp;
int err;
if (!(bt_dev.drv->quirks & BT_QUIRK_NO_RESET)) {
/* Send HCI_RESET */
err = bt_hci_cmd_send_sync(BT_HCI_OP_RESET, NULL, &rsp);
if (err) {
return err;
}
hci_reset_complete(rsp);
net_buf_unref(rsp);
}
/* Read Local Supported Features */
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_LOCAL_FEATURES, NULL, &rsp);
if (err) {
return err;
}
read_local_features_complete(rsp);
net_buf_unref(rsp);
/* Read Local Version Information */
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_LOCAL_VERSION_INFO, NULL,
&rsp);
if (err) {
return err;
}
read_local_ver_complete(rsp);
net_buf_unref(rsp);
/* Read Bluetooth Address */
if (!atomic_test_bit(bt_dev.flags, BT_DEV_USER_ID_ADDR)) {
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_BD_ADDR, NULL, &rsp);
if (err) {
return err;
}
read_bdaddr_complete(rsp);
net_buf_unref(rsp);
}
/* Read Local Supported Commands */
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_SUPPORTED_COMMANDS, NULL,
&rsp);
if (err) {
return err;
}
read_supported_commands_complete(rsp);
net_buf_unref(rsp);
if (IS_ENABLED(CONFIG_BT_HOST_CRYPTO)) {
/* Initialize the PRNG so that it is safe to use it later
* on in the initialization process.
*/
err = prng_init();
if (err) {
return err;
}
}
#if defined(CONFIG_BT_HCI_ACL_FLOW_CONTROL)
err = set_flow_control();
if (err) {
return err;
}
#endif /* CONFIG_BT_CONN */
return 0;
}
static int le_set_event_mask(void)
{
struct bt_hci_cp_le_set_event_mask *cp_mask;
struct net_buf *buf;
u64_t mask = 0;
/* Set LE event mask */
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_EVENT_MASK, sizeof(*cp_mask));
if (!buf) {
return -ENOBUFS;
}
cp_mask = net_buf_add(buf, sizeof(*cp_mask));
mask |= BT_EVT_MASK_LE_ADVERTISING_REPORT;
if (IS_ENABLED(CONFIG_BT_CONN)) {
if (IS_ENABLED(CONFIG_BT_PRIVACY) &&
BT_FEAT_LE_PRIVACY(bt_dev.le.features)) {
mask |= BT_EVT_MASK_LE_ENH_CONN_COMPLETE;
} else {
mask |= BT_EVT_MASK_LE_CONN_COMPLETE;
}
mask |= BT_EVT_MASK_LE_CONN_UPDATE_COMPLETE;
mask |= BT_EVT_MASK_LE_REMOTE_FEAT_COMPLETE;
if (BT_FEAT_LE_CONN_PARAM_REQ_PROC(bt_dev.le.features)) {
mask |= BT_EVT_MASK_LE_CONN_PARAM_REQ;
}
if (BT_FEAT_LE_DLE(bt_dev.le.features)) {
mask |= BT_EVT_MASK_LE_DATA_LEN_CHANGE;
}
if (BT_FEAT_LE_PHY_2M(bt_dev.le.features) ||
BT_FEAT_LE_PHY_CODED(bt_dev.le.features)) {
mask |= BT_EVT_MASK_LE_PHY_UPDATE_COMPLETE;
}
}
if (IS_ENABLED(CONFIG_BT_SMP) &&
BT_FEAT_LE_ENCR(bt_dev.le.features)) {
mask |= BT_EVT_MASK_LE_LTK_REQUEST;
}
/*
* If "LE Read Local P-256 Public Key" and "LE Generate DH Key" are
* supported we need to enable events generated by those commands.
*/
if ((bt_dev.supported_commands[34] & 0x02) &&
(bt_dev.supported_commands[34] & 0x04)) {
mask |= BT_EVT_MASK_LE_P256_PUBLIC_KEY_COMPLETE;
mask |= BT_EVT_MASK_LE_GENERATE_DHKEY_COMPLETE;
}
sys_put_le64(mask, cp_mask->events);
return bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_EVENT_MASK, buf, NULL);
}
static int le_init(void)
{
struct bt_hci_cp_write_le_host_supp *cp_le;
struct net_buf *buf, *rsp;
int err;
/* For now we only support LE capable controllers */
if (!BT_FEAT_LE(bt_dev.features)) {
BT_ERR("Non-LE capable controller detected!");
return -ENODEV;
}
/* Read Low Energy Supported Features */
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_LOCAL_FEATURES, NULL,
&rsp);
if (err) {
return err;
}
read_le_features_complete(rsp);
net_buf_unref(rsp);
#if defined(CONFIG_BT_CONN)
/* Read LE Buffer Size */
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_BUFFER_SIZE,
NULL, &rsp);
if (err) {
return err;
}
le_read_buffer_size_complete(rsp);
net_buf_unref(rsp);
#endif
if (BT_FEAT_BREDR(bt_dev.features)) {
buf = bt_hci_cmd_create(BT_HCI_OP_LE_WRITE_LE_HOST_SUPP,
sizeof(*cp_le));
if (!buf) {
return -ENOBUFS;
}
cp_le = net_buf_add(buf, sizeof(*cp_le));
/* Explicitly enable LE for dual-mode controllers */
cp_le->le = 0x01;
cp_le->simul = 0x00;
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_WRITE_LE_HOST_SUPP, buf,
NULL);
if (err) {
return err;
}
}
/* Read LE Supported States */
if (BT_CMD_LE_STATES(bt_dev.supported_commands)) {
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_SUPP_STATES, NULL,
&rsp);
if (err) {
return err;
}
le_read_supp_states_complete(rsp);
net_buf_unref(rsp);
}
if (IS_ENABLED(CONFIG_BT_CONN) &&
BT_FEAT_LE_DLE(bt_dev.le.features)) {
struct bt_hci_cp_le_write_default_data_len *cp;
struct bt_hci_rp_le_read_max_data_len *rp;
u16_t tx_octets, tx_time;
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_MAX_DATA_LEN, NULL,
&rsp);
if (err) {
return err;
}
rp = (void *)rsp->data;
tx_octets = sys_le16_to_cpu(rp->max_tx_octets);
tx_time = sys_le16_to_cpu(rp->max_tx_time);
net_buf_unref(rsp);
buf = bt_hci_cmd_create(BT_HCI_OP_LE_WRITE_DEFAULT_DATA_LEN,
sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->max_tx_octets = sys_cpu_to_le16(tx_octets);
cp->max_tx_time = sys_cpu_to_le16(tx_time);
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_WRITE_DEFAULT_DATA_LEN,
buf, NULL);
if (err) {
return err;
}
}
#if defined(CONFIG_BT_SMP)
if (IS_ENABLED(CONFIG_BT_PRIVACY) &&
BT_FEAT_LE_PRIVACY(bt_dev.le.features)) {
struct bt_hci_rp_le_read_rl_size *rp;
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_RL_SIZE, NULL,
&rsp);
if (err) {
return err;
}
rp = (void *)rsp->data;
BT_DBG("Resolving List size %u", rp->rl_size);
bt_dev.le.rl_size = rp->rl_size;
net_buf_unref(rsp);
}
#endif
return le_set_event_mask();
}
#if defined(CONFIG_BT_BREDR)
static int read_ext_features(void)
{
int i;
/* Read Local Supported Extended Features */
for (i = 1; i < LMP_FEAT_PAGES_COUNT; i++) {
struct bt_hci_cp_read_local_ext_features *cp;
struct bt_hci_rp_read_local_ext_features *rp;
struct net_buf *buf, *rsp;
int err;
buf = bt_hci_cmd_create(BT_HCI_OP_READ_LOCAL_EXT_FEATURES,
sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->page = i;
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_LOCAL_EXT_FEATURES,
buf, &rsp);
if (err) {
return err;
}
rp = (void *)rsp->data;
memcpy(&bt_dev.features[i], rp->ext_features,
sizeof(bt_dev.features[i]));
if (rp->max_page <= i) {
net_buf_unref(rsp);
break;
}
net_buf_unref(rsp);
}
return 0;
}
void device_supported_pkt_type(void)
{
/* Device supported features and sco packet types */
if (BT_FEAT_HV2_PKT(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_HV2);
}
if (BT_FEAT_HV3_PKT(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_HV3);
}
if (BT_FEAT_LMP_ESCO_CAPABLE(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_EV3);
}
if (BT_FEAT_EV4_PKT(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_EV4);
}
if (BT_FEAT_EV5_PKT(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_EV5);
}
if (BT_FEAT_2EV3_PKT(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_2EV3);
}
if (BT_FEAT_3EV3_PKT(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_3EV3);
}
if (BT_FEAT_3SLOT_PKT(bt_dev.features)) {
bt_dev.br.esco_pkt_type |= (HCI_PKT_TYPE_ESCO_2EV5 |
HCI_PKT_TYPE_ESCO_3EV5);
}
}
static int br_init(void)
{
struct net_buf *buf;
struct bt_hci_cp_write_ssp_mode *ssp_cp;
struct bt_hci_cp_write_inquiry_mode *inq_cp;
struct bt_hci_write_local_name *name_cp;
int err;
/* Read extended local features */
if (BT_FEAT_EXT_FEATURES(bt_dev.features)) {
err = read_ext_features();
if (err) {
return err;
}
}
/* Add local supported packet types to bt_dev */
device_supported_pkt_type();
/* Get BR/EDR buffer size */
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_BUFFER_SIZE, NULL, &buf);
if (err) {
return err;
}
read_buffer_size_complete(buf);
net_buf_unref(buf);
/* Set SSP mode */
buf = bt_hci_cmd_create(BT_HCI_OP_WRITE_SSP_MODE, sizeof(*ssp_cp));
if (!buf) {
return -ENOBUFS;
}
ssp_cp = net_buf_add(buf, sizeof(*ssp_cp));
ssp_cp->mode = 0x01;
err = bt_hci_cmd_send_sync(BT_HCI_OP_WRITE_SSP_MODE, buf, NULL);
if (err) {
return err;
}
/* Enable Inquiry results with RSSI or extended Inquiry */
buf = bt_hci_cmd_create(BT_HCI_OP_WRITE_INQUIRY_MODE, sizeof(*inq_cp));
if (!buf) {
return -ENOBUFS;
}
inq_cp = net_buf_add(buf, sizeof(*inq_cp));
inq_cp->mode = 0x02;
err = bt_hci_cmd_send_sync(BT_HCI_OP_WRITE_INQUIRY_MODE, buf, NULL);
if (err) {
return err;
}
/* Set local name */
buf = bt_hci_cmd_create(BT_HCI_OP_WRITE_LOCAL_NAME, sizeof(*name_cp));
if (!buf) {
return -ENOBUFS;
}
name_cp = net_buf_add(buf, sizeof(*name_cp));
strncpy((char *)name_cp->local_name, CONFIG_BT_DEVICE_NAME,
sizeof(name_cp->local_name));
err = bt_hci_cmd_send_sync(BT_HCI_OP_WRITE_LOCAL_NAME, buf, NULL);
if (err) {
return err;
}
/* Set page timeout*/
buf = bt_hci_cmd_create(BT_HCI_OP_WRITE_PAGE_TIMEOUT, sizeof(u16_t));
if (!buf) {
return -ENOBUFS;
}
net_buf_add_le16(buf, CONFIG_BT_PAGE_TIMEOUT);
err = bt_hci_cmd_send_sync(BT_HCI_OP_WRITE_PAGE_TIMEOUT, buf, NULL);
if (err) {
return err;
}
/* Enable BR/EDR SC if supported */
if (BT_FEAT_SC(bt_dev.features)) {
struct bt_hci_cp_write_sc_host_supp *sc_cp;
buf = bt_hci_cmd_create(BT_HCI_OP_WRITE_SC_HOST_SUPP,
sizeof(*sc_cp));
if (!buf) {
return -ENOBUFS;
}
sc_cp = net_buf_add(buf, sizeof(*sc_cp));
sc_cp->sc_support = 0x01;
err = bt_hci_cmd_send_sync(BT_HCI_OP_WRITE_SC_HOST_SUPP, buf,
NULL);
if (err) {
return err;
}
}
return 0;
}
#else
static int br_init(void)
{
#if defined(CONFIG_BT_CONN)
struct net_buf *rsp;
int err;
if (bt_dev.le.mtu) {
return 0;
}
/* Use BR/EDR buffer size if LE reports zero buffers */
err = bt_hci_cmd_send_sync(BT_HCI_OP_READ_BUFFER_SIZE, NULL, &rsp);
if (err) {
return err;
}
read_buffer_size_complete(rsp);
net_buf_unref(rsp);
#endif /* CONFIG_BT_CONN */
return 0;
}
#endif
static int set_event_mask(void)
{
struct bt_hci_cp_set_event_mask *ev;
struct net_buf *buf;
u64_t mask = 0;
buf = bt_hci_cmd_create(BT_HCI_OP_SET_EVENT_MASK, sizeof(*ev));
if (!buf) {
return -ENOBUFS;
}
ev = net_buf_add(buf, sizeof(*ev));
if (IS_ENABLED(CONFIG_BT_BREDR)) {
/* Since we require LE support, we can count on a
* Bluetooth 4.0 feature set
*/
mask |= BT_EVT_MASK_INQUIRY_COMPLETE;
mask |= BT_EVT_MASK_CONN_COMPLETE;
mask |= BT_EVT_MASK_CONN_REQUEST;
mask |= BT_EVT_MASK_AUTH_COMPLETE;
mask |= BT_EVT_MASK_REMOTE_NAME_REQ_COMPLETE;
mask |= BT_EVT_MASK_REMOTE_FEATURES;
mask |= BT_EVT_MASK_ROLE_CHANGE;
mask |= BT_EVT_MASK_PIN_CODE_REQ;
mask |= BT_EVT_MASK_LINK_KEY_REQ;
mask |= BT_EVT_MASK_LINK_KEY_NOTIFY;
mask |= BT_EVT_MASK_INQUIRY_RESULT_WITH_RSSI;
mask |= BT_EVT_MASK_REMOTE_EXT_FEATURES;
mask |= BT_EVT_MASK_SYNC_CONN_COMPLETE;
mask |= BT_EVT_MASK_EXTENDED_INQUIRY_RESULT;
mask |= BT_EVT_MASK_IO_CAPA_REQ;
mask |= BT_EVT_MASK_IO_CAPA_RESP;
mask |= BT_EVT_MASK_USER_CONFIRM_REQ;
mask |= BT_EVT_MASK_USER_PASSKEY_REQ;
mask |= BT_EVT_MASK_SSP_COMPLETE;
mask |= BT_EVT_MASK_USER_PASSKEY_NOTIFY;
}
mask |= BT_EVT_MASK_HARDWARE_ERROR;
mask |= BT_EVT_MASK_DATA_BUFFER_OVERFLOW;
mask |= BT_EVT_MASK_LE_META_EVENT;
if (IS_ENABLED(CONFIG_BT_CONN)) {
mask |= BT_EVT_MASK_DISCONN_COMPLETE;
mask |= BT_EVT_MASK_REMOTE_VERSION_INFO;
}
if (IS_ENABLED(CONFIG_BT_SMP) &&
BT_FEAT_LE_ENCR(bt_dev.le.features)) {
mask |= BT_EVT_MASK_ENCRYPT_CHANGE;
mask |= BT_EVT_MASK_ENCRYPT_KEY_REFRESH_COMPLETE;
}
sys_put_le64(mask, ev->events);
return bt_hci_cmd_send_sync(BT_HCI_OP_SET_EVENT_MASK, buf, NULL);
}
static inline int create_random_addr(bt_addr_le_t *addr)
{
addr->type = BT_ADDR_LE_RANDOM;
return bt_rand(addr->a.val, 6);
}
int bt_addr_le_create_nrpa(bt_addr_le_t *addr)
{
int err;
err = create_random_addr(addr);
if (err) {
return err;
}
BT_ADDR_SET_NRPA(&addr->a);
return 0;
}
int bt_addr_le_create_static(bt_addr_le_t *addr)
{
int err;
err = create_random_addr(addr);
if (err) {
return err;
}
BT_ADDR_SET_STATIC(&addr->a);
return 0;
}
int bt_set_static_addr(void)
{
int err;
if (bt_dev.id_addr.type != BT_ADDR_LE_RANDOM ||
(bt_dev.id_addr.a.val[5] & 0xc0) != 0xc0) {
BT_ERR("Only static random address supported as identity");
return -EINVAL;
}
err = set_random_address(&bt_dev.id_addr.a);
if (err) {
return err;
}
atomic_set_bit(bt_dev.flags, BT_DEV_ID_STATIC_RANDOM);
return 0;
}
static int setup_id_addr(void)
{
int err;
#if defined(CONFIG_BT_HCI_VS_EXT)
/* Check for VS_Read_Static_Addresses support */
if (bt_dev.vs_commands[1] & BIT(0)) {
struct bt_hci_rp_vs_read_static_addrs *rp;
struct net_buf *rsp;
err = bt_hci_cmd_send_sync(BT_HCI_OP_VS_READ_STATIC_ADDRS,
NULL, &rsp);
if (err) {
BT_WARN("Failed to read static addresses");
goto generate;
}
rp = (void *)rsp->data;
if (rp->num_addrs) {
bt_dev.id_addr.type = BT_ADDR_LE_RANDOM;
bt_addr_copy(&bt_dev.id_addr.a, &rp->a[0].bdaddr);
net_buf_unref(rsp);
return bt_set_static_addr();
}
BT_WARN("No static addresses stored in controller");
net_buf_unref(rsp);
} else {
BT_WARN("Read Static Addresses command not available");
}
generate:
#endif
if (IS_ENABLED(CONFIG_BT_SETTINGS)) {
BT_DBG("Expecing identity addr to be handled by settings");
return 0;
} else {
err = bt_addr_le_create_static(&bt_dev.id_addr);
if (err) {
return err;
}
BT_WARN("Using temporary static random address %s",
bt_addr_str(&bt_dev.id_addr.a));
return bt_set_static_addr();
}
}
#if defined(CONFIG_BT_DEBUG)
static const char *ver_str(u8_t ver)
{
const char * const str[] = {
"1.0b", "1.1", "1.2", "2.0", "2.1", "3.0", "4.0", "4.1", "4.2",
"5.0",
};
if (ver < ARRAY_SIZE(str)) {
return str[ver];
}
return "unknown";
}
void bt_dev_show_info(void)
{
BT_INFO("Identity: %s", bt_addr_le_str(&bt_dev.id_addr));
BT_INFO("HCI: version %s (0x%02x) revision 0x%04x, manufacturer 0x%04x",
ver_str(bt_dev.hci_version), bt_dev.hci_version,
bt_dev.hci_revision, bt_dev.manufacturer);
BT_INFO("LMP: version %s (0x%02x) subver 0x%04x",
ver_str(bt_dev.lmp_version), bt_dev.lmp_version,
bt_dev.lmp_subversion);
}
#else
void bt_dev_show_info(void)
{
}
#endif /* CONFIG_BT_DEBUG */
#if defined(CONFIG_BT_HCI_VS_EXT)
#if defined(CONFIG_BT_DEBUG)
static const char *vs_hw_platform(u16_t platform)
{
static const char * const plat_str[] = {
"reserved", "Intel Corporation", "Nordic Semiconductor",
"NXP Semiconductors" };
if (platform < ARRAY_SIZE(plat_str)) {
return plat_str[platform];
}
return "unknown";
}
static const char *vs_hw_variant(u16_t platform, u16_t variant)
{
static const char * const nordic_str[] = {
"reserved", "nRF51x", "nRF52x"
};
if (platform != BT_HCI_VS_HW_PLAT_NORDIC) {
return "unknown";
}
if (variant < ARRAY_SIZE(nordic_str)) {
return nordic_str[variant];
}
return "unknown";
}
static const char *vs_fw_variant(u8_t variant)
{
static const char * const var_str[] = {
"Standard Bluetooth controller",
"Vendor specific controller",
"Firmware loader",
"Rescue image",
};
if (variant < ARRAY_SIZE(var_str)) {
return var_str[variant];
}
return "unknown";
}
#endif /* CONFIG_BT_DEBUG */
static void hci_vs_init(void)
{
union {
struct bt_hci_rp_vs_read_version_info *info;
struct bt_hci_rp_vs_read_supported_commands *cmds;
struct bt_hci_rp_vs_read_supported_features *feat;
} rp;
struct net_buf *rsp;
int err;
/* If heuristics is enabled, try to guess HCI VS support by looking
* at the HCI version and identity address. We haven't tried to set
* a static random address yet at this point, so the identity will
* either be zeroes or a valid public address.
*/
if (IS_ENABLED(CONFIG_BT_HCI_VS_EXT_DETECT) &&
(bt_dev.hci_version < BT_HCI_VERSION_5_0 ||
(!atomic_test_bit(bt_dev.flags, BT_DEV_USER_ID_ADDR) &&
bt_addr_le_cmp(&bt_dev.id_addr, BT_ADDR_LE_ANY)))) {
BT_WARN("Controller doesn't seem to support Zephyr vendor HCI");
return;
}
err = bt_hci_cmd_send_sync(BT_HCI_OP_VS_READ_VERSION_INFO, NULL, &rsp);
if (err) {
BT_WARN("Vendor HCI extensions not available");
return;
}
#if defined(CONFIG_BT_DEBUG)
rp.info = (void *)rsp->data;
BT_INFO("HW Platform: %s (0x%04x)",
vs_hw_platform(sys_le16_to_cpu(rp.info->hw_platform)),
sys_le16_to_cpu(rp.info->hw_platform));
BT_INFO("HW Variant: %s (0x%04x)",
vs_hw_variant(sys_le16_to_cpu(rp.info->hw_platform),
sys_le16_to_cpu(rp.info->hw_variant)),
sys_le16_to_cpu(rp.info->hw_variant));
BT_INFO("Firmware: %s (0x%02x) Version %u.%u Build %u",
vs_fw_variant(rp.info->fw_variant), rp.info->fw_variant,
rp.info->fw_version, sys_le16_to_cpu(rp.info->fw_revision),
sys_le32_to_cpu(rp.info->fw_build));
#endif /* CONFIG_BT_DEBUG */
net_buf_unref(rsp);
err = bt_hci_cmd_send_sync(BT_HCI_OP_VS_READ_SUPPORTED_COMMANDS,
NULL, &rsp);
if (err) {
BT_WARN("Failed to read supported vendor features");
return;
}
rp.cmds = (void *)rsp->data;
memcpy(bt_dev.vs_commands, rp.cmds->commands, BT_DEV_VS_CMDS_MAX);
net_buf_unref(rsp);
err = bt_hci_cmd_send_sync(BT_HCI_OP_VS_READ_SUPPORTED_FEATURES,
NULL, &rsp);
if (err) {
BT_WARN("Failed to read supported vendor commands");
return;
}
rp.feat = (void *)rsp->data;
memcpy(bt_dev.vs_features, rp.feat->features, BT_DEV_VS_FEAT_MAX);
net_buf_unref(rsp);
}
#endif /* CONFIG_BT_HCI_VS_EXT */
static int hci_init(void)
{
int err;
err = common_init();
if (err) {
return err;
}
err = le_init();
if (err) {
return err;
}
if (BT_FEAT_BREDR(bt_dev.features)) {
err = br_init();
if (err) {
return err;
}
} else if (IS_ENABLED(CONFIG_BT_BREDR)) {
BT_ERR("Non-BR/EDR controller detected");
return -EIO;
}
err = set_event_mask();
if (err) {
return err;
}
#if defined(CONFIG_BT_HCI_VS_EXT)
hci_vs_init();
#endif
if (!bt_addr_le_cmp(&bt_dev.id_addr, BT_ADDR_LE_ANY) ||
!bt_addr_le_cmp(&bt_dev.id_addr, BT_ADDR_LE_NONE)) {
BT_DBG("No public address. Trying to set static random.");
err = setup_id_addr();
if (err) {
BT_ERR("Unable to set identity address");
return err;
}
}
if (!IS_ENABLED(CONFIG_BT_SETTINGS)) {
bt_dev_show_info();
}
return 0;
}
int bt_send(struct net_buf *buf)
{
BT_DBG("buf %p len %u type %u", buf, buf->len, bt_buf_get_type(buf));
bt_monitor_send(bt_monitor_opcode(buf), buf->data, buf->len);
if (IS_ENABLED(CONFIG_BT_TINYCRYPT_ECC)) {
return bt_hci_ecc_send(buf);
}
return bt_dev.drv->send(buf);
}
int bt_recv(struct net_buf *buf)
{
bt_monitor_send(bt_monitor_opcode(buf), buf->data, buf->len);
BT_DBG("buf %p len %u", buf, buf->len);
switch (bt_buf_get_type(buf)) {
#if defined(CONFIG_BT_CONN)
case BT_BUF_ACL_IN:
#if defined(CONFIG_BT_RECV_IS_RX_THREAD)
hci_acl(buf);
#else
net_buf_put(&bt_dev.rx_queue, buf);
#endif
return 0;
#endif /* BT_CONN */
case BT_BUF_EVT:
#if defined(CONFIG_BT_RECV_IS_RX_THREAD)
hci_event(buf);
#else
net_buf_put(&bt_dev.rx_queue, buf);
#endif
return 0;
default:
BT_ERR("Invalid buf type %u", bt_buf_get_type(buf));
net_buf_unref(buf);
return -EINVAL;
}
}
int bt_recv_prio(struct net_buf *buf)
{
struct bt_hci_evt_hdr *hdr = (void *)buf->data;
bt_monitor_send(bt_monitor_opcode(buf), buf->data, buf->len);
BT_ASSERT(bt_buf_get_type(buf) == BT_BUF_EVT);
BT_ASSERT(buf->len >= sizeof(*hdr));
BT_ASSERT(bt_hci_evt_is_prio(hdr->evt));
net_buf_pull(buf, sizeof(*hdr));
switch (hdr->evt) {
case BT_HCI_EVT_CMD_COMPLETE:
hci_cmd_complete(buf);
break;
case BT_HCI_EVT_CMD_STATUS:
hci_cmd_status(buf);
break;
#if defined(CONFIG_BT_CONN)
case BT_HCI_EVT_NUM_COMPLETED_PACKETS:
hci_num_completed_packets(buf);
break;
#endif /* CONFIG_BT_CONN */
default:
net_buf_unref(buf);
BT_ASSERT(0);
return -EINVAL;
}
net_buf_unref(buf);
return 0;
}
int bt_hci_driver_register(const struct bt_hci_driver *drv)
{
if (bt_dev.drv) {
return -EALREADY;
}
if (!drv->open || !drv->send) {
return -EINVAL;
}
bt_dev.drv = drv;
BT_DBG("Registered %s", drv->name ? drv->name : "");
bt_monitor_new_index(BT_MONITOR_TYPE_PRIMARY, drv->bus,
BT_ADDR_ANY, drv->name ? drv->name : "bt0");
return 0;
}
#if defined(CONFIG_BT_PRIVACY)
static int irk_init(void)
{
if (IS_ENABLED(CONFIG_BT_SETTINGS)) {
BT_DBG("Expecting settings to handle local IRK");
} else {
int err;
err = bt_rand(bt_dev.irk, sizeof(bt_dev.irk));
if (err) {
return err;
}
BT_WARN("Using temporary IRK");
}
return 0;
}
#endif /* CONFIG_BT_PRIVACY */
static int bt_init(void)
{
int err;
err = hci_init();
if (err) {
return err;
}
if (IS_ENABLED(CONFIG_BT_CONN)) {
err = bt_conn_init();
if (err) {
return err;
}
}
#if defined(CONFIG_BT_PRIVACY)
err = irk_init();
if (err) {
return err;
}
k_delayed_work_init(&bt_dev.rpa_update, rpa_timeout);
#endif
bt_monitor_send(BT_MONITOR_OPEN_INDEX, NULL, 0);
atomic_set_bit(bt_dev.flags, BT_DEV_READY);
bt_le_scan_update(false);
return 0;
}
static void init_work(struct k_work *work)
{
int err;
err = bt_init();
if (ready_cb) {
ready_cb(err);
}
}
#if !defined(CONFIG_BT_RECV_IS_RX_THREAD)
static void hci_rx_thread(void)
{
struct net_buf *buf;
BT_DBG("started");
while (1) {
BT_DBG("calling fifo_get_wait");
net: buf: Redesigned pool & buffer allocation API Until now it has been necessary to separately define a k_fifo and an array of buffers when creating net_buf pools. This has been a bit of an inconvenience as well as blurred the line of what exactly constitutes the "pool". This patch removes the NET_BUF_POOL() macro and replaces it with a NET_BUF_POOL_DEFINE() macro that internally expands into the buffer array and new net_buf_pool struct with a given name: NET_BUF_POOL_DEFINE(pool_name, ...); Having a dedicated context struct for the pool has the added benefit that we can start moving there net_buf members that have the same value for all buffers from the same pool. The first such member that gets moved is the destroy callback, thus shrinking net_buf by four bytes. Another potential candidate is the user_data_size, however right not that's left out since it would just leave 2 bytes of padding in net_buf (i.e. not influence its size). Another common value is buf->size, however that one is also used by net_buf_simple and can therefore not be moved. This patch also splits getting buffers from a FIFO and allocating a new buffer from a pool into two separate APIs: net_buf_get and net_buf_alloc, thus simplifying the APIs and their usage. There is no separate 'reserve_head' parameter anymore when allocating, rather the user is expected to call net_buf_reserve() afterwards if something else than 0 headroom is desired. Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-10-18 23:24:51 +03:00
buf = net_buf_get(&bt_dev.rx_queue, K_FOREVER);
2016-04-09 11:29:50 +03:00
BT_DBG("buf %p type %u len %u", buf, bt_buf_get_type(buf),
buf->len);
2016-04-09 11:29:50 +03:00
switch (bt_buf_get_type(buf)) {
#if defined(CONFIG_BT_CONN)
2016-04-09 11:29:50 +03:00
case BT_BUF_ACL_IN:
hci_acl(buf);
break;
#endif /* CONFIG_BT_CONN */
2016-04-09 11:29:50 +03:00
case BT_BUF_EVT:
hci_event(buf);
break;
default:
2016-04-09 11:29:50 +03:00
BT_ERR("Unknown buf type %u", bt_buf_get_type(buf));
net_buf_unref(buf);
break;
}
/* Make sure we don't hog the CPU if the rx_queue never
* gets empty.
*/
k_yield();
}
}
#endif /* !CONFIG_BT_RECV_IS_RX_THREAD */
int bt_enable(bt_ready_cb_t cb)
{
int err;
if (!bt_dev.drv) {
BT_ERR("No HCI driver registered");
return -ENODEV;
}
if (atomic_test_and_set_bit(bt_dev.flags, BT_DEV_ENABLE)) {
return -EALREADY;
}
if (IS_ENABLED(CONFIG_BT_SETTINGS)) {
err = bt_settings_init();
if (err) {
return err;
}
}
ready_cb = cb;
/* TX thread */
k_thread_create(&tx_thread_data, tx_thread_stack,
K_THREAD_STACK_SIZEOF(tx_thread_stack),
hci_tx_thread, NULL, NULL, NULL,
K_PRIO_COOP(CONFIG_BT_HCI_TX_PRIO),
0, K_NO_WAIT);
#if !defined(CONFIG_BT_RECV_IS_RX_THREAD)
/* RX thread */
k_thread_create(&rx_thread_data, rx_thread_stack,
K_THREAD_STACK_SIZEOF(rx_thread_stack),
(k_thread_entry_t)hci_rx_thread, NULL, NULL, NULL,
K_PRIO_COOP(CONFIG_BT_RX_PRIO),
0, K_NO_WAIT);
#endif
if (IS_ENABLED(CONFIG_BT_TINYCRYPT_ECC)) {
bt_hci_ecc_init();
}
err = bt_dev.drv->open();
if (err) {
BT_ERR("HCI driver open failed (%d)", err);
return err;
}
if (!cb) {
return bt_init();
}
k_work_submit(&bt_dev.init);
return 0;
}
int bt_set_id_addr(const bt_addr_le_t *addr)
{
if (atomic_test_bit(bt_dev.flags, BT_DEV_READY)) {
BT_ERR("Setting identity not allowed after bt_enable()");
return -EBUSY;
}
if (addr->type != BT_ADDR_LE_RANDOM || !BT_ADDR_IS_STATIC(&addr->a)) {
BT_ERR("Only static random identity address supported");
return -EINVAL;
}
bt_addr_le_copy(&bt_dev.id_addr, addr);
atomic_set_bit(bt_dev.flags, BT_DEV_USER_ID_ADDR);
atomic_set_bit(bt_dev.flags, BT_DEV_ID_STATIC_RANDOM);
return 0;
}
bool bt_addr_le_is_bonded(const bt_addr_le_t *addr)
{
if (IS_ENABLED(CONFIG_BT_SMP)) {
struct bt_keys *keys = bt_keys_find_addr(addr);
/* if there are any keys stored then device is bonded */
return keys && keys->keys;
} else {
return false;
}
}
static bool valid_adv_param(const struct bt_le_adv_param *param)
{
if (!(param->options & BT_LE_ADV_OPT_CONNECTABLE)) {
/*
* BT Core 4.2 [Vol 2, Part E, 7.8.5]
* The Advertising_Interval_Min and Advertising_Interval_Max
* shall not be set to less than 0x00A0 (100 ms) if the
* Advertising_Type is set to ADV_SCAN_IND or ADV_NONCONN_IND.
*/
if (bt_dev.hci_version < BT_HCI_VERSION_5_0 &&
param->interval_min < 0x00a0) {
return false;
}
}
if (param->interval_min > param->interval_max ||
param->interval_min < 0x0020 || param->interval_max > 0x4000) {
return false;
}
return true;
}
static int set_ad(u16_t hci_op, const struct bt_data *ad, size_t ad_len)
{
struct bt_hci_cp_le_set_adv_data *set_data;
struct net_buf *buf;
int i;
buf = bt_hci_cmd_create(hci_op, sizeof(*set_data));
if (!buf) {
return -ENOBUFS;
}
set_data = net_buf_add(buf, sizeof(*set_data));
memset(set_data, 0, sizeof(*set_data));
for (i = 0; i < ad_len; i++) {
/* Check if ad fit in the remaining buffer */
if (set_data->len + ad[i].data_len + 2 > 31) {
net_buf_unref(buf);
return -EINVAL;
}
set_data->data[set_data->len++] = ad[i].data_len + 1;
set_data->data[set_data->len++] = ad[i].type;
memcpy(&set_data->data[set_data->len], ad[i].data,
ad[i].data_len);
set_data->len += ad[i].data_len;
}
return bt_hci_cmd_send_sync(hci_op, buf, NULL);
}
int bt_le_adv_start(const struct bt_le_adv_param *param,
const struct bt_data *ad, size_t ad_len,
const struct bt_data *sd, size_t sd_len)
{
struct bt_hci_cp_le_set_adv_param set_param;
struct net_buf *buf;
int err;
if (!valid_adv_param(param)) {
return -EINVAL;
}
if (atomic_test_bit(bt_dev.flags, BT_DEV_ADVERTISING)) {
return -EALREADY;
}
err = set_ad(BT_HCI_OP_LE_SET_ADV_DATA, ad, ad_len);
if (err) {
return err;
}
/*
* We need to set SCAN_RSP when enabling advertising type that allows
* for Scan Requests.
*
* If sd was not provided but we enable connectable undirected
* advertising sd needs to be cleared from values set by previous calls.
* Clearing sd is done by calling set_ad() with NULL data and zero len.
* So following condition check is unusual but correct.
*/
if (sd || (param->options & BT_LE_ADV_OPT_CONNECTABLE)) {
err = set_ad(BT_HCI_OP_LE_SET_SCAN_RSP_DATA, sd, sd_len);
if (err) {
return err;
}
}
memset(&set_param, 0, sizeof(set_param));
set_param.min_interval = sys_cpu_to_le16(param->interval_min);
set_param.max_interval = sys_cpu_to_le16(param->interval_max);
set_param.channel_map = 0x07;
if (param->options & BT_LE_ADV_OPT_CONNECTABLE) {
if (IS_ENABLED(CONFIG_BT_PRIVACY) &&
!(param->options & BT_LE_ADV_OPT_USE_IDENTITY)) {
err = le_set_private_addr();
if (err) {
return err;
}
if (BT_FEAT_LE_PRIVACY(bt_dev.le.features)) {
set_param.own_addr_type =
BT_HCI_OWN_ADDR_RPA_OR_RANDOM;
} else {
set_param.own_addr_type = BT_ADDR_LE_RANDOM;
}
} else {
/*
* If Static Random address is used as Identity
* address we need to restore it before advertising
* is enabled. Otherwise NRPA used for active scan
* could be used for advertising.
*/
if (atomic_test_bit(bt_dev.flags,
BT_DEV_ID_STATIC_RANDOM)) {
set_random_address(&bt_dev.id_addr.a);
}
set_param.own_addr_type = bt_dev.id_addr.type;
}
set_param.type = BT_LE_ADV_IND;
} else {
if (param->options & BT_LE_ADV_OPT_USE_IDENTITY) {
if (atomic_test_bit(bt_dev.flags,
BT_DEV_ID_STATIC_RANDOM)) {
err = set_random_address(&bt_dev.id_addr.a);
}
set_param.own_addr_type = bt_dev.id_addr.type;
} else {
err = le_set_private_addr();
set_param.own_addr_type = BT_ADDR_LE_RANDOM;
}
if (err) {
return err;
}
if (sd) {
set_param.type = BT_LE_ADV_SCAN_IND;
} else {
set_param.type = BT_LE_ADV_NONCONN_IND;
}
}
buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADV_PARAM, sizeof(set_param));
if (!buf) {
return -ENOBUFS;
}
net_buf_add_mem(buf, &set_param, sizeof(set_param));
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_ADV_PARAM, buf, NULL);
if (err) {
return err;
}
err = set_advertise_enable(true);
if (err) {
return err;
}
if (!(param->options & BT_LE_ADV_OPT_ONE_TIME)) {
atomic_set_bit(bt_dev.flags, BT_DEV_KEEP_ADVERTISING);
}
return 0;
}
int bt_le_adv_stop(void)
{
int err;
/* Make sure advertising is not re-enabled later even if it's not
* currently enabled (i.e. BT_DEV_ADVERTISING is not set).
*/
atomic_clear_bit(bt_dev.flags, BT_DEV_KEEP_ADVERTISING);
if (!atomic_test_bit(bt_dev.flags, BT_DEV_ADVERTISING)) {
return 0;
}
err = set_advertise_enable(false);
if (err) {
return err;
}
if (!IS_ENABLED(CONFIG_BT_PRIVACY)) {
/* If active scan is ongoing set NRPA */
if (atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING) &&
atomic_test_bit(bt_dev.flags, BT_DEV_ACTIVE_SCAN)) {
le_set_private_addr();
}
}
return 0;
}
static bool valid_le_scan_param(const struct bt_le_scan_param *param)
{
if (param->type != BT_HCI_LE_SCAN_PASSIVE &&
param->type != BT_HCI_LE_SCAN_ACTIVE) {
return false;
}
if (param->filter_dup != BT_HCI_LE_SCAN_FILTER_DUP_DISABLE &&
param->filter_dup != BT_HCI_LE_SCAN_FILTER_DUP_ENABLE) {
return false;
}
if (param->interval < 0x0004 || param->interval > 0x4000) {
return false;
}
if (param->window < 0x0004 || param->window > 0x4000) {
return false;
}
if (param->window > param->interval) {
return false;
}
return true;
}
int bt_le_scan_start(const struct bt_le_scan_param *param, bt_le_scan_cb_t cb)
{
int err;
/* Check that the parameters have valid values */
if (!valid_le_scan_param(param)) {
return -EINVAL;
}
/* Return if active scan is already enabled */
if (atomic_test_and_set_bit(bt_dev.flags, BT_DEV_EXPLICIT_SCAN)) {
return -EALREADY;
}
if (atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING)) {
err = set_le_scan_enable(BT_HCI_LE_SCAN_DISABLE);
if (err) {
atomic_clear_bit(bt_dev.flags, BT_DEV_EXPLICIT_SCAN);
return err;
}
}
if (param->filter_dup) {
atomic_set_bit(bt_dev.flags, BT_DEV_SCAN_FILTER_DUP);
} else {
atomic_clear_bit(bt_dev.flags, BT_DEV_SCAN_FILTER_DUP);
}
err = start_le_scan(param->type, param->interval, param->window);
if (err) {
atomic_clear_bit(bt_dev.flags, BT_DEV_EXPLICIT_SCAN);
return err;
}
scan_dev_found_cb = cb;
return 0;
}
int bt_le_scan_stop(void)
{
/* Return if active scanning is already disabled */
if (!atomic_test_and_clear_bit(bt_dev.flags, BT_DEV_EXPLICIT_SCAN)) {
return -EALREADY;
}
scan_dev_found_cb = NULL;
return bt_le_scan_update(false);
}
struct net_buf *bt_buf_get_rx(enum bt_buf_type type, s32_t timeout)
{
struct net_buf *buf;
__ASSERT(type == BT_BUF_EVT || type == BT_BUF_ACL_IN,
"Invalid buffer type requested");
#if defined(CONFIG_BT_HCI_ACL_FLOW_CONTROL)
if (type == BT_BUF_EVT) {
buf = net_buf_alloc(&hci_rx_pool, timeout);
} else {
buf = net_buf_alloc(&acl_in_pool, timeout);
}
#else
buf = net_buf_alloc(&hci_rx_pool, timeout);
#endif
if (buf) {
net_buf_reserve(buf, CONFIG_BT_HCI_RESERVE);
bt_buf_set_type(buf, type);
}
return buf;
}
struct net_buf *bt_buf_get_cmd_complete(s32_t timeout)
{
struct net_buf *buf;
unsigned int key;
key = irq_lock();
buf = bt_dev.sent_cmd;
bt_dev.sent_cmd = NULL;
irq_unlock(key);
BT_DBG("sent_cmd %p", buf);
if (buf) {
bt_buf_set_type(buf, BT_BUF_EVT);
buf->len = 0;
net_buf_reserve(buf, CONFIG_BT_HCI_RESERVE);
return buf;
}
return bt_buf_get_rx(BT_BUF_EVT, timeout);
}
#if defined(CONFIG_BT_BREDR)
static int br_start_inquiry(const struct bt_br_discovery_param *param)
{
const u8_t iac[3] = { 0x33, 0x8b, 0x9e };
struct bt_hci_op_inquiry *cp;
struct net_buf *buf;
buf = bt_hci_cmd_create(BT_HCI_OP_INQUIRY, sizeof(*cp));
if (!buf) {
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
cp->length = param->length;
cp->num_rsp = 0xff; /* we limit discovery only by time */
memcpy(cp->lap, iac, 3);
if (param->limited) {
cp->lap[0] = 0x00;
}
return bt_hci_cmd_send_sync(BT_HCI_OP_INQUIRY, buf, NULL);
}
static bool valid_br_discov_param(const struct bt_br_discovery_param *param,
size_t num_results)
{
if (!num_results || num_results > 255) {
return false;
}
if (!param->length || param->length > 0x30) {
return false;
}
return true;
}
int bt_br_discovery_start(const struct bt_br_discovery_param *param,
struct bt_br_discovery_result *results, size_t cnt,
bt_br_discovery_cb_t cb)
{
int err;
BT_DBG("");
if (!valid_br_discov_param(param, cnt)) {
return -EINVAL;
}
if (atomic_test_bit(bt_dev.flags, BT_DEV_INQUIRY)) {
return -EALREADY;
}
err = br_start_inquiry(param);
if (err) {
return err;
}
atomic_set_bit(bt_dev.flags, BT_DEV_INQUIRY);
memset(results, 0, sizeof(*results) * cnt);
discovery_cb = cb;
discovery_results = results;
discovery_results_size = cnt;
discovery_results_count = 0;
return 0;
}
int bt_br_discovery_stop(void)
{
int err;
int i;
BT_DBG("");
if (!atomic_test_bit(bt_dev.flags, BT_DEV_INQUIRY)) {
return -EALREADY;
}
err = bt_hci_cmd_send_sync(BT_HCI_OP_INQUIRY_CANCEL, NULL, NULL);
if (err) {
return err;
}
for (i = 0; i < discovery_results_count; i++) {
struct discovery_priv *priv;
struct bt_hci_cp_remote_name_cancel *cp;
struct net_buf *buf;
priv = (struct discovery_priv *)&discovery_results[i]._priv;
if (!priv->resolving) {
continue;
}
buf = bt_hci_cmd_create(BT_HCI_OP_REMOTE_NAME_CANCEL,
sizeof(*cp));
if (!buf) {
continue;
}
cp = net_buf_add(buf, sizeof(*cp));
bt_addr_copy(&cp->bdaddr, &discovery_results[i].addr);
bt_hci_cmd_send_sync(BT_HCI_OP_REMOTE_NAME_CANCEL, buf, NULL);
}
atomic_clear_bit(bt_dev.flags, BT_DEV_INQUIRY);
discovery_cb = NULL;
discovery_results = NULL;
discovery_results_size = 0;
discovery_results_count = 0;
return 0;
}
static int write_scan_enable(u8_t scan)
{
struct net_buf *buf;
int err;
BT_DBG("type %u", scan);
buf = bt_hci_cmd_create(BT_HCI_OP_WRITE_SCAN_ENABLE, 1);
if (!buf) {
return -ENOBUFS;
}
net_buf_add_u8(buf, scan);
err = bt_hci_cmd_send_sync(BT_HCI_OP_WRITE_SCAN_ENABLE, buf, NULL);
if (err) {
return err;
}
if (scan & BT_BREDR_SCAN_INQUIRY) {
atomic_set_bit(bt_dev.flags, BT_DEV_ISCAN);
} else {
atomic_clear_bit(bt_dev.flags, BT_DEV_ISCAN);
}
if (scan & BT_BREDR_SCAN_PAGE) {
atomic_set_bit(bt_dev.flags, BT_DEV_PSCAN);
} else {
atomic_clear_bit(bt_dev.flags, BT_DEV_PSCAN);
}
return 0;
}
int bt_br_set_connectable(bool enable)
{
if (enable) {
if (atomic_test_bit(bt_dev.flags, BT_DEV_PSCAN)) {
return -EALREADY;
} else {
return write_scan_enable(BT_BREDR_SCAN_PAGE);
}
} else {
if (!atomic_test_bit(bt_dev.flags, BT_DEV_PSCAN)) {
return -EALREADY;
} else {
return write_scan_enable(BT_BREDR_SCAN_DISABLED);
}
}
}
int bt_br_set_discoverable(bool enable)
{
if (enable) {
if (atomic_test_bit(bt_dev.flags, BT_DEV_ISCAN)) {
return -EALREADY;
}
if (!atomic_test_bit(bt_dev.flags, BT_DEV_PSCAN)) {
return -EPERM;
}
return write_scan_enable(BT_BREDR_SCAN_INQUIRY |
BT_BREDR_SCAN_PAGE);
} else {
if (!atomic_test_bit(bt_dev.flags, BT_DEV_ISCAN)) {
return -EALREADY;
}
return write_scan_enable(BT_BREDR_SCAN_PAGE);
}
}
#endif /* CONFIG_BT_BREDR */
u16_t bt_hci_get_cmd_opcode(struct net_buf *buf)
{
return cmd(buf)->opcode;
}
int bt_pub_key_gen(struct bt_pub_key_cb *new_cb)
{
struct bt_pub_key_cb *cb;
int err;
/*
* We check for both "LE Read Local P-256 Public Key" and
* "LE Generate DH Key" support here since both commands are needed for
* ECC support. If "LE Generate DH Key" is not supported then there
* is no point in reading local public key.
*/
if (!(bt_dev.supported_commands[34] & 0x02) ||
!(bt_dev.supported_commands[34] & 0x04)) {
BT_WARN("ECC HCI commands not available");
return -ENOTSUP;
}
new_cb->_next = pub_key_cb;
pub_key_cb = new_cb;
if (atomic_test_and_set_bit(bt_dev.flags, BT_DEV_PUB_KEY_BUSY)) {
return 0;
}
atomic_clear_bit(bt_dev.flags, BT_DEV_HAS_PUB_KEY);
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_P256_PUBLIC_KEY, NULL, NULL);
if (err) {
BT_ERR("Sending LE P256 Public Key command failed");
atomic_clear_bit(bt_dev.flags, BT_DEV_PUB_KEY_BUSY);
pub_key_cb = NULL;
return err;
}
for (cb = pub_key_cb; cb; cb = cb->_next) {
if (cb != new_cb) {
cb->func(NULL);
}
}
return 0;
}
const u8_t *bt_pub_key_get(void)
{
if (atomic_test_bit(bt_dev.flags, BT_DEV_HAS_PUB_KEY)) {
return pub_key;
}
return NULL;
}
int bt_dh_key_gen(const u8_t remote_pk[64], bt_dh_key_cb_t cb)
{
struct bt_hci_cp_le_generate_dhkey *cp;
struct net_buf *buf;
int err;
if (dh_key_cb || atomic_test_bit(bt_dev.flags, BT_DEV_PUB_KEY_BUSY)) {
return -EBUSY;
}
if (!atomic_test_bit(bt_dev.flags, BT_DEV_HAS_PUB_KEY)) {
return -EADDRNOTAVAIL;
}
dh_key_cb = cb;
buf = bt_hci_cmd_create(BT_HCI_OP_LE_GENERATE_DHKEY, sizeof(*cp));
if (!buf) {
dh_key_cb = NULL;
return -ENOBUFS;
}
cp = net_buf_add(buf, sizeof(*cp));
memcpy(cp->key, remote_pk, sizeof(cp->key));
err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_GENERATE_DHKEY, buf, NULL);
if (err) {
dh_key_cb = NULL;
return err;
}
return 0;
}
#if defined(CONFIG_BT_BREDR)
int bt_br_oob_get_local(struct bt_br_oob *oob)
{
bt_addr_copy(&oob->addr, &bt_dev.id_addr.a);
return 0;
}
#endif /* CONFIG_BT_BREDR */
int bt_le_oob_get_local(struct bt_le_oob *oob)
{
if (IS_ENABLED(CONFIG_BT_PRIVACY)) {
int err;
/* Invalidate RPA so a new one is generated */
atomic_clear_bit(bt_dev.flags, BT_DEV_RPA_VALID);
err = le_set_private_addr();
if (err) {
return err;
}
bt_addr_le_copy(&oob->addr, &bt_dev.random_addr);
} else {
bt_addr_le_copy(&oob->addr, &bt_dev.id_addr);
}
return 0;
}