zephyr/kernel/mailbox.c

462 lines
13 KiB
C
Raw Permalink Normal View History

unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/*
* Copyright (c) 2016 Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
*/
/**
* @brief Mailboxes.
*/
#include <zephyr/kernel.h>
#include <zephyr/kernel_structs.h>
#include <zephyr/toolchain.h>
#include <zephyr/linker/sections.h>
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
#include <string.h>
#include <zephyr/sys/dlist.h>
#include <zephyr/init.h>
/* private kernel APIs */
#include <ksched.h>
#include <kthread.h>
#include <wait_q.h>
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
#ifdef CONFIG_OBJ_CORE_MAILBOX
static struct k_obj_type obj_type_mailbox;
#endif /* CONFIG_OBJ_CORE_MAILBOX */
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/* asynchronous message descriptor type */
struct k_mbox_async {
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
struct _thread_base thread; /* dummy thread object */
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
struct k_mbox_msg tx_msg; /* transmit message descriptor */
};
/* stack of unused asynchronous message descriptors */
K_STACK_DEFINE(async_msg_free, CONFIG_NUM_MBOX_ASYNC_MSGS);
/* allocate an asynchronous message descriptor */
static inline void mbox_async_alloc(struct k_mbox_async **async)
{
(void)k_stack_pop(&async_msg_free, (stack_data_t *)async, K_FOREVER);
}
/* free an asynchronous message descriptor */
static inline void mbox_async_free(struct k_mbox_async *async)
{
k_stack_push(&async_msg_free, (stack_data_t)async);
}
/*
* Do run-time initialization of mailbox object subsystem.
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
*/
init: remove the need for a dummy device pointer in SYS_INIT functions The init infrastructure, found in `init.h`, is currently used by: - `SYS_INIT`: to call functions before `main` - `DEVICE_*`: to initialize devices They are all sorted according to an initialization level + a priority. `SYS_INIT` calls are really orthogonal to devices, however, the required function signature requires a `const struct device *dev` as a first argument. The only reason for that is because the same init machinery is used by devices, so we have something like: ```c struct init_entry { int (*init)(const struct device *dev); /* only set by DEVICE_*, otherwise NULL */ const struct device *dev; } ``` As a result, we end up with such weird/ugly pattern: ```c static int my_init(const struct device *dev) { /* always NULL! add ARG_UNUSED to avoid compiler warning */ ARG_UNUSED(dev); ... } ``` This is really a result of poor internals isolation. This patch proposes a to make init entries more flexible so that they can accept sytem initialization calls like this: ```c static int my_init(void) { ... } ``` This is achieved using a union: ```c union init_function { /* for SYS_INIT, used when init_entry.dev == NULL */ int (*sys)(void); /* for DEVICE*, used when init_entry.dev != NULL */ int (*dev)(const struct device *dev); }; struct init_entry { /* stores init function (either for SYS_INIT or DEVICE*) union init_function init_fn; /* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows * to know which union entry to call. */ const struct device *dev; } ``` This solution **does not increase ROM usage**, and allows to offer clean public APIs for both SYS_INIT and DEVICE*. Note that however, init machinery keeps a coupling with devices. **NOTE**: This is a breaking change! All `SYS_INIT` functions will need to be converted to the new signature. See the script offered in the following commit. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> init: convert SYS_INIT functions to the new signature Conversion scripted using scripts/utils/migrate_sys_init.py. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> manifest: update projects for SYS_INIT changes Update modules with updated SYS_INIT calls: - hal_ti - lvgl - sof - TraceRecorderSource Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> tests: devicetree: devices: adjust test Adjust test according to the recently introduced SYS_INIT infrastructure. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> tests: kernel: threads: adjust SYS_INIT call Adjust to the new signature: int (*init_fn)(void); Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-10-19 09:33:44 +02:00
static int init_mbox_module(void)
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
{
/* array of asynchronous message descriptors */
static struct k_mbox_async __noinit async_msg[CONFIG_NUM_MBOX_ASYNC_MSGS];
/*
* Create pool of asynchronous message descriptors.
*
* A dummy thread requires minimal initialization, since it never gets
* to execute. The _THREAD_DUMMY flag is sufficient to distinguish a
* dummy thread from a real one. The threads are *not* added to the
* kernel's list of known threads.
*
* Once initialized, the address of each descriptor is added to a stack
* that governs access to them.
*/
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
int i;
for (i = 0; i < CONFIG_NUM_MBOX_ASYNC_MSGS; i++) {
z_init_thread_base(&async_msg[i].thread, 0, _THREAD_DUMMY, 0);
k_stack_push(&async_msg_free, (stack_data_t)&async_msg[i]);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
/* Complete initialization of statically defined mailboxes. */
return 0;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
SYS_INIT(init_mbox_module, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_OBJECTS);
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS > 0 */
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
void k_mbox_init(struct k_mbox *mbox)
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
{
z_waitq_init(&mbox->tx_msg_queue);
z_waitq_init(&mbox->rx_msg_queue);
mbox->lock = (struct k_spinlock) {};
#ifdef CONFIG_OBJ_CORE_MAILBOX
k_obj_core_init_and_link(K_OBJ_CORE(mbox), &obj_type_mailbox);
#endif /* CONFIG_OBJ_CORE_MAILBOX */
SYS_PORT_TRACING_OBJ_INIT(k_mbox, mbox);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
/**
* @brief Check compatibility of sender's and receiver's message descriptors.
*
* Compares sender's and receiver's message descriptors to see if they are
* compatible. If so, the descriptor fields are updated to reflect that a
* match has occurred.
*
* @param tx_msg Pointer to transmit message descriptor.
* @param rx_msg Pointer to receive message descriptor.
*
* @return 0 if successfully matched, otherwise -1.
*/
static int mbox_message_match(struct k_mbox_msg *tx_msg,
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
struct k_mbox_msg *rx_msg)
{
uint32_t temp_info;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
if (((tx_msg->tx_target_thread == (k_tid_t)K_ANY) ||
(tx_msg->tx_target_thread == rx_msg->tx_target_thread)) &&
((rx_msg->rx_source_thread == (k_tid_t)K_ANY) ||
(rx_msg->rx_source_thread == tx_msg->rx_source_thread))) {
/* update thread identifier fields for both descriptors */
rx_msg->rx_source_thread = tx_msg->rx_source_thread;
tx_msg->tx_target_thread = rx_msg->tx_target_thread;
/* update application info fields for both descriptors */
temp_info = rx_msg->info;
rx_msg->info = tx_msg->info;
tx_msg->info = temp_info;
/* update data size field for receiver only */
if (rx_msg->size > tx_msg->size) {
rx_msg->size = tx_msg->size;
}
/* update data location fields for receiver only */
rx_msg->tx_data = tx_msg->tx_data;
/* update syncing thread field for receiver only */
rx_msg->_syncing_thread = tx_msg->_syncing_thread;
return 0;
}
return -1;
}
/**
* @brief Dispose of received message.
*
* Notifies the sender that message processing is complete.
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
*
* @param rx_msg Pointer to receive message descriptor.
*/
static void mbox_message_dispose(struct k_mbox_msg *rx_msg)
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
{
struct k_thread *sending_thread;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
struct k_mbox_msg *tx_msg;
/* do nothing if message was disposed of when it was received */
if (rx_msg->_syncing_thread == NULL) {
return;
}
/* recover sender info */
sending_thread = rx_msg->_syncing_thread;
rx_msg->_syncing_thread = NULL;
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
tx_msg = (struct k_mbox_msg *)sending_thread->base.swap_data;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* update data size field for sender */
tx_msg->size = rx_msg->size;
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/*
* asynchronous send: free asynchronous message descriptor +
* dummy thread pair, then give semaphore (if needed)
*/
if ((sending_thread->base.thread_state & _THREAD_DUMMY) != 0U) {
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
struct k_sem *async_sem = tx_msg->_async_sem;
mbox_async_free((struct k_mbox_async *)sending_thread);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
if (async_sem != NULL) {
k_sem_give(async_sem);
}
return;
}
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS */
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* synchronous send: wake up sending thread */
arch_thread_return_value_set(sending_thread, 0);
z_mark_thread_as_not_pending(sending_thread);
z_ready_thread(sending_thread);
z_reschedule_unlocked();
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
/**
* @brief Send a mailbox message.
*
* Helper routine that handles both synchronous and asynchronous sends.
*
* @param mbox Pointer to the mailbox object.
* @param tx_msg Pointer to transmit message descriptor.
* @param timeout Maximum time (milliseconds) to wait for the message to be
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
* received (although not necessarily completely processed).
* Use K_NO_WAIT to return immediately, or K_FOREVER to wait as long
* as necessary.
*
* @return 0 if successful, -ENOMSG if failed immediately, -EAGAIN if timed out
*/
static int mbox_message_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg,
kernel/timeout: Make timeout arguments an opaque type Add a k_timeout_t type, and use it everywhere that kernel API functions were accepting a millisecond timeout argument. Instead of forcing milliseconds everywhere (which are often not integrally representable as system ticks), do the conversion to ticks at the point where the timeout is created. This avoids an extra unit conversion in some application code, and allows us to express the timeout in units other than milliseconds to achieve greater precision. The existing K_MSEC() et. al. macros now return initializers for a k_timeout_t. The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t values, which means they cannot be operated on as integers. Applications which have their own APIs that need to inspect these vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to test for equality. Timer drivers, which receive an integer tick count in ther z_clock_set_timeout() functions, now use the integer-valued K_TICKS_FOREVER constant instead of K_FOREVER. For the initial release, to preserve source compatibility, a CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the k_timeout_t will remain a compatible 32 bit value that will work with any legacy Zephyr application. Some subsystems present timeout (or timeout-like) values to their own users as APIs that would re-use the kernel's own constants and conventions. These will require some minor design work to adapt to the new scheme (in most cases just using k_timeout_t directly in their own API), and they have not been changed in this patch, instead selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems include: CAN Bus, the Microbit display driver, I2S, LoRa modem drivers, the UART Async API, Video hardware drivers, the console subsystem, and the network buffer abstraction. k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant provided that works identically to the original API. Most of the changes here are just type/configuration management and documentation, but there are logic changes in mempool, where a loop that used a timeout numerically has been reworked using a new z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was enabled) a similar loop was needlessly used to try to retry the k_poll() call after a spurious failure. But k_poll() does not fail spuriously, so the loop was removed. Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2020-03-06 00:18:14 +01:00
k_timeout_t timeout)
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
{
struct k_thread *sending_thread;
struct k_thread *receiving_thread;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
struct k_mbox_msg *rx_msg;
k_spinlock_key_t key;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* save sender id so it can be used during message matching */
tx_msg->rx_source_thread = _current;
/* finish readying sending thread (actual or dummy) for send */
sending_thread = tx_msg->_syncing_thread;
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
sending_thread->base.swap_data = tx_msg;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* search mailbox's rx queue for a compatible receiver */
key = k_spin_lock(&mbox->lock);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, message_put, mbox, timeout);
_WAIT_Q_FOR_EACH(&mbox->rx_msg_queue, receiving_thread) {
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
rx_msg = (struct k_mbox_msg *)receiving_thread->base.swap_data;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
if (mbox_message_match(tx_msg, rx_msg) == 0) {
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* take receiver out of rx queue */
z_unpend_thread(receiving_thread);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* ready receiver for execution */
arch_thread_return_value_set(receiving_thread, 0);
z_ready_thread(receiving_thread);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/*
* asynchronous send: swap out current thread
* if receiver has priority, otherwise let it continue
*
* note: dummy sending thread sits (unqueued)
* until the receiver consumes the message
*/
if ((sending_thread->base.thread_state & _THREAD_DUMMY)
!= 0U) {
z_reschedule(&mbox->lock, key);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
return 0;
}
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS */
SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_mbox, message_put, mbox, timeout);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/*
* synchronous send: pend current thread (unqueued)
* until the receiver consumes the message
*/
int ret = z_pend_curr(&mbox->lock, key, NULL, K_FOREVER);
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, message_put, mbox, timeout, ret);
return ret;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
}
/* didn't find a matching receiver: don't wait for one */
kernel/timeout: Make timeout arguments an opaque type Add a k_timeout_t type, and use it everywhere that kernel API functions were accepting a millisecond timeout argument. Instead of forcing milliseconds everywhere (which are often not integrally representable as system ticks), do the conversion to ticks at the point where the timeout is created. This avoids an extra unit conversion in some application code, and allows us to express the timeout in units other than milliseconds to achieve greater precision. The existing K_MSEC() et. al. macros now return initializers for a k_timeout_t. The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t values, which means they cannot be operated on as integers. Applications which have their own APIs that need to inspect these vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to test for equality. Timer drivers, which receive an integer tick count in ther z_clock_set_timeout() functions, now use the integer-valued K_TICKS_FOREVER constant instead of K_FOREVER. For the initial release, to preserve source compatibility, a CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the k_timeout_t will remain a compatible 32 bit value that will work with any legacy Zephyr application. Some subsystems present timeout (or timeout-like) values to their own users as APIs that would re-use the kernel's own constants and conventions. These will require some minor design work to adapt to the new scheme (in most cases just using k_timeout_t directly in their own API), and they have not been changed in this patch, instead selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems include: CAN Bus, the Microbit display driver, I2S, LoRa modem drivers, the UART Async API, Video hardware drivers, the console subsystem, and the network buffer abstraction. k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant provided that works identically to the original API. Most of the changes here are just type/configuration management and documentation, but there are logic changes in mempool, where a loop that used a timeout numerically has been reworked using a new z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was enabled) a similar loop was needlessly used to try to retry the k_poll() call after a spurious failure. But k_poll() does not fail spuriously, so the loop was removed. Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2020-03-06 00:18:14 +01:00
if (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) {
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, message_put, mbox, timeout, -ENOMSG);
k_spin_unlock(&mbox->lock, key);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
return -ENOMSG;
}
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/* asynchronous send: dummy thread waits on tx queue for receiver */
if ((sending_thread->base.thread_state & _THREAD_DUMMY) != 0U) {
z_pend_thread(sending_thread, &mbox->tx_msg_queue, K_FOREVER);
k_spin_unlock(&mbox->lock, key);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
return 0;
}
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS */
SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_mbox, message_put, mbox, timeout);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* synchronous send: sender waits on tx queue for receiver or timeout */
int ret = z_pend_curr(&mbox->lock, key, &mbox->tx_msg_queue, timeout);
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, message_put, mbox, timeout, ret);
return ret;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
kernel/timeout: Make timeout arguments an opaque type Add a k_timeout_t type, and use it everywhere that kernel API functions were accepting a millisecond timeout argument. Instead of forcing milliseconds everywhere (which are often not integrally representable as system ticks), do the conversion to ticks at the point where the timeout is created. This avoids an extra unit conversion in some application code, and allows us to express the timeout in units other than milliseconds to achieve greater precision. The existing K_MSEC() et. al. macros now return initializers for a k_timeout_t. The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t values, which means they cannot be operated on as integers. Applications which have their own APIs that need to inspect these vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to test for equality. Timer drivers, which receive an integer tick count in ther z_clock_set_timeout() functions, now use the integer-valued K_TICKS_FOREVER constant instead of K_FOREVER. For the initial release, to preserve source compatibility, a CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the k_timeout_t will remain a compatible 32 bit value that will work with any legacy Zephyr application. Some subsystems present timeout (or timeout-like) values to their own users as APIs that would re-use the kernel's own constants and conventions. These will require some minor design work to adapt to the new scheme (in most cases just using k_timeout_t directly in their own API), and they have not been changed in this patch, instead selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems include: CAN Bus, the Microbit display driver, I2S, LoRa modem drivers, the UART Async API, Video hardware drivers, the console subsystem, and the network buffer abstraction. k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant provided that works identically to the original API. Most of the changes here are just type/configuration management and documentation, but there are logic changes in mempool, where a loop that used a timeout numerically has been reworked using a new z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was enabled) a similar loop was needlessly used to try to retry the k_poll() call after a spurious failure. But k_poll() does not fail spuriously, so the loop was removed. Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2020-03-06 00:18:14 +01:00
int k_mbox_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg,
k_timeout_t timeout)
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
{
/* configure things for a synchronous send, then send the message */
tx_msg->_syncing_thread = _current;
SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, put, mbox, timeout);
int ret = mbox_message_put(mbox, tx_msg, timeout);
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, put, mbox, timeout, ret);
return ret;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
void k_mbox_async_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg,
struct k_sem *sem)
{
struct k_mbox_async *async;
SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, async_put, mbox, sem);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/*
* allocate an asynchronous message descriptor, configure both parts,
* then send the message asynchronously
*/
mbox_async_alloc(&async);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
async->thread.prio = _current->base.prio;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
async->tx_msg = *tx_msg;
async->tx_msg._syncing_thread = (struct k_thread *)&async->thread;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
async->tx_msg._async_sem = sem;
(void)mbox_message_put(mbox, &async->tx_msg, K_FOREVER);
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, async_put, mbox, sem);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS */
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
void k_mbox_data_get(struct k_mbox_msg *rx_msg, void *buffer)
{
/* handle case where data is to be discarded */
if (buffer == NULL) {
rx_msg->size = 0;
mbox_message_dispose(rx_msg);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
return;
}
/* copy message data to buffer, then dispose of message */
if ((rx_msg->tx_data != NULL) && (rx_msg->size > 0U)) {
(void)memcpy(buffer, rx_msg->tx_data, rx_msg->size);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
mbox_message_dispose(rx_msg);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
/**
* @brief Handle immediate consumption of received mailbox message data.
*
* Checks to see if received message data should be kept for later retrieval,
* or if the data should consumed immediately and the message disposed of.
*
* The data is consumed immediately in either of the following cases:
* 1) The receiver requested immediate retrieval by supplying a buffer
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
* to receive the data.
* 2) There is no data to be retrieved. (i.e. Data size is 0 bytes.)
*
* @param rx_msg Pointer to receive message descriptor.
* @param buffer Pointer to buffer to receive data.
*
* @return 0
*/
static int mbox_message_data_check(struct k_mbox_msg *rx_msg, void *buffer)
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
{
if (buffer != NULL) {
/* retrieve data now, then dispose of message */
k_mbox_data_get(rx_msg, buffer);
} else if (rx_msg->size == 0U) {
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* there is no data to get, so just dispose of message */
mbox_message_dispose(rx_msg);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
} else {
/* keep message around for later data retrieval */
}
return 0;
}
int k_mbox_get(struct k_mbox *mbox, struct k_mbox_msg *rx_msg, void *buffer,
kernel/timeout: Make timeout arguments an opaque type Add a k_timeout_t type, and use it everywhere that kernel API functions were accepting a millisecond timeout argument. Instead of forcing milliseconds everywhere (which are often not integrally representable as system ticks), do the conversion to ticks at the point where the timeout is created. This avoids an extra unit conversion in some application code, and allows us to express the timeout in units other than milliseconds to achieve greater precision. The existing K_MSEC() et. al. macros now return initializers for a k_timeout_t. The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t values, which means they cannot be operated on as integers. Applications which have their own APIs that need to inspect these vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to test for equality. Timer drivers, which receive an integer tick count in ther z_clock_set_timeout() functions, now use the integer-valued K_TICKS_FOREVER constant instead of K_FOREVER. For the initial release, to preserve source compatibility, a CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the k_timeout_t will remain a compatible 32 bit value that will work with any legacy Zephyr application. Some subsystems present timeout (or timeout-like) values to their own users as APIs that would re-use the kernel's own constants and conventions. These will require some minor design work to adapt to the new scheme (in most cases just using k_timeout_t directly in their own API), and they have not been changed in this patch, instead selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems include: CAN Bus, the Microbit display driver, I2S, LoRa modem drivers, the UART Async API, Video hardware drivers, the console subsystem, and the network buffer abstraction. k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant provided that works identically to the original API. Most of the changes here are just type/configuration management and documentation, but there are logic changes in mempool, where a loop that used a timeout numerically has been reworked using a new z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was enabled) a similar loop was needlessly used to try to retry the k_poll() call after a spurious failure. But k_poll() does not fail spuriously, so the loop was removed. Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2020-03-06 00:18:14 +01:00
k_timeout_t timeout)
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
{
struct k_thread *sending_thread;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
struct k_mbox_msg *tx_msg;
k_spinlock_key_t key;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
int result;
/* save receiver id so it can be used during message matching */
rx_msg->tx_target_thread = _current;
/* search mailbox's tx queue for a compatible sender */
key = k_spin_lock(&mbox->lock);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, get, mbox, timeout);
_WAIT_Q_FOR_EACH(&mbox->tx_msg_queue, sending_thread) {
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
tx_msg = (struct k_mbox_msg *)sending_thread->base.swap_data;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
if (mbox_message_match(tx_msg, rx_msg) == 0) {
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* take sender out of mailbox's tx queue */
z_unpend_thread(sending_thread);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
k_spin_unlock(&mbox->lock, key);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* consume message data immediately, if needed */
result = mbox_message_data_check(rx_msg, buffer);
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, get, mbox, timeout, result);
return result;
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
}
/* didn't find a matching sender */
kernel/timeout: Make timeout arguments an opaque type Add a k_timeout_t type, and use it everywhere that kernel API functions were accepting a millisecond timeout argument. Instead of forcing milliseconds everywhere (which are often not integrally representable as system ticks), do the conversion to ticks at the point where the timeout is created. This avoids an extra unit conversion in some application code, and allows us to express the timeout in units other than milliseconds to achieve greater precision. The existing K_MSEC() et. al. macros now return initializers for a k_timeout_t. The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t values, which means they cannot be operated on as integers. Applications which have their own APIs that need to inspect these vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to test for equality. Timer drivers, which receive an integer tick count in ther z_clock_set_timeout() functions, now use the integer-valued K_TICKS_FOREVER constant instead of K_FOREVER. For the initial release, to preserve source compatibility, a CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the k_timeout_t will remain a compatible 32 bit value that will work with any legacy Zephyr application. Some subsystems present timeout (or timeout-like) values to their own users as APIs that would re-use the kernel's own constants and conventions. These will require some minor design work to adapt to the new scheme (in most cases just using k_timeout_t directly in their own API), and they have not been changed in this patch, instead selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems include: CAN Bus, the Microbit display driver, I2S, LoRa modem drivers, the UART Async API, Video hardware drivers, the console subsystem, and the network buffer abstraction. k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant provided that works identically to the original API. Most of the changes here are just type/configuration management and documentation, but there are logic changes in mempool, where a loop that used a timeout numerically has been reworked using a new z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was enabled) a similar loop was needlessly used to try to retry the k_poll() call after a spurious failure. But k_poll() does not fail spuriously, so the loop was removed. Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2020-03-06 00:18:14 +01:00
if (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) {
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, get, mbox, timeout, -ENOMSG);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* don't wait for a matching sender to appear */
k_spin_unlock(&mbox->lock, key);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
return -ENOMSG;
}
SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_mbox, get, mbox, timeout);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* wait until a matching sender appears or a timeout occurs */
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
_current->base.swap_data = rx_msg;
result = z_pend_curr(&mbox->lock, key, &mbox->rx_msg_queue, timeout);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
/* consume message data immediately, if needed */
if (result == 0) {
result = mbox_message_data_check(rx_msg, buffer);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
}
SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, get, mbox, timeout, result);
unified: initial unified kernel implementation Summary of what this includes: initialization: Copy from nano_init.c, with the following changes: - the main thread is the continuation of the init thread, but an idle thread is created as well - _main() initializes threads in groups and starts the EXE group - the ready queues are initialized - the main thread is marked as non-essential once the system init is done - a weak main() symbol is provided if the application does not provide a main() function scheduler: Not an exhaustive list, but basically provide primitives for: - adding/removing a thread to/from a wait queue - adding/removing a thread to/from the ready queue - marking thread as ready - locking/unlocking the scheduler - instead of locking interrupts - getting/setting thread priority - checking what state (coop/preempt) a thread is currenlty running in - rescheduling threads - finding what thread is the next to run - yielding/sleeping/aborting sleep - finding the current thread threads: - Add operationns on threads, such as creating and starting them. standardized handling of kernel object return codes: - Kernel objects now cause _Swap() to return the following values: 0 => operation successful -EAGAIN => operation timed out -Exxxxx => operation failed for another reason - The thread's swap_data field can be used to return any additional information required to complete the operation, such as the actual result of a successful operation. timeouts: - same as nano timeouts, renamed to simply 'timeouts' - the kernel is still tick-based, but objects take timeout values in ms for forward compatibility with a tickless kernel. semaphores: - Port of the nanokernel semaphores, which have the same basic behaviour as the microkernel ones. Semaphore groups are not yet implemented. - These semaphores are enhanced in that they accept an initial count and a count limit. This allows configuring them as binary semaphores, and also provisioning them without having to "give" the semaphore multiple times before using them. mutexes: - Straight port of the microkernel mutexes. An init function is added to allow defining them at runtime. pipes: - straight port timers: - amalgamation of nano and micro timers, with all functionalities intact. events: - re-implementation, using semaphores and workqueues. mailboxes: - straight port message queues: - straight port of microkernel FIFOs memory maps: - straight port workqueues: - Basically, have all APIs follow the k_ naming rule, and use the _timeout subsystem from the unified kernel directory, and not the _nano_timeout one. stacks: - Port of the nanokernel stacks. They can now have multiple threads pending on them and threads can wait with a timeout. LIFOs: - Straight port of the nanokernel LIFOs. FIFOs: - Straight port of the nanokernel FIFOs. Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com> Peter Mitsis <peter.mitsis@windriver.com> Allan Stephens <allan.stephens@windriver.com> Benjamin Walsh <benjamin.walsh@windriver.com> Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 00:55:39 +02:00
return result;
}
#ifdef CONFIG_OBJ_CORE_MAILBOX
static int init_mailbox_obj_core_list(void)
{
/* Initialize mailbox object type */
z_obj_type_init(&obj_type_mailbox, K_OBJ_TYPE_MBOX_ID,
offsetof(struct k_mbox, obj_core));
/* Initialize and link statically defined mailboxes */
STRUCT_SECTION_FOREACH(k_mbox, mbox) {
k_obj_core_init_and_link(K_OBJ_CORE(mbox), &obj_type_mailbox);
}
return 0;
}
SYS_INIT(init_mailbox_obj_core_list, PRE_KERNEL_1,
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS);
#endif /* CONFIG_OBJ_CORE_MAILBOX */