michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/dts/bindings/gpio/intel,apl-gpio.yaml

34 lines
515 B
YAML
Raw Permalink Normal View History

gpio: intel_apl: rework driver for pin_mask callback To avoid confusion, callbacks using ordinal pin numbers is going to be reverted. So the driver has to be re-worked to expose multiple devices so each device has 32 pins. Also fixes #12765 Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-01-30 04:34:41 +01:00
# Copyright (c) 2018-2019 Intel Corporation
gpio: add driver for Intel Apollo Lake SoC This adds a driver for GPIO controller on the Intel Apollo Lake SoC. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-09-19 19:15:12 +02:00
# SPDX-License-Identifier: Apache-2.0
yaml: Remove redundant document separators YAML document separators are needed e.g. when doing $ cat doc1.yaml doc2.yaml | <parser> For the bindings, we never parse concatenated documents. Assume we don't for any other .yaml files either. Having document separators in e.g. base.yaml makes !include a bit confusing, since the !included files are merged and not separate documents (the merging is done in Python code though, so it makes no difference for behavior). The replacement was done with $ git ls-files '*.yaml' | \ xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//' First pattern removes ... at the end of files, second pattern clears a line with a lone --- on it. Some redundant blank lines at the end of files were cleared with $ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}' This is more about making sure people can understand why every part of a binding is there than about removing some text. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-06-19 00:03:49 +02:00
dts: bindings: Remove 'title:' and put all info. into 'description:' Add any useful information from 'title:' to the 'description:' strings (e.g. explanations of acronyms), and remove 'title:' as well as any copy-pasted "this binding gives a ..." boilerplate. Also clean some description strings up a bit. Some other things could probably be cleaned up (replacing 'GPIO node' with 'GPIO controller' on controllers for consistency, for example), but I kept things close to the original to avoid accidentally messing up. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-19 08:39:11 +01:00
description: Intel Apollo Lake GPIO node
gpio: add driver for Intel Apollo Lake SoC This adds a driver for GPIO controller on the Intel Apollo Lake SoC. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-09-19 19:15:12 +02:00
scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-19 20:32:25 +02:00
compatible: "intel,apl-gpio"
dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-22 01:10:12 +02:00
include: [gpio-controller.yaml, base.yaml]
dts/bindings: Move common properties into a base.yaml Move common properties like 'compatible', 'reg', 'reg-names', 'interrupts', 'interrupt-names', and 'label' into one common base.yaml that all the other yaml's can inherit from. This removes both duplication and inconsistent definition. The device specific yamls just need to say if a property is 'required' or not. NOTE: due to some generation conflicts we did not covert 'soc-nv-flash.yaml' to use base.yaml. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-07 18:12:49 +02:00
gpio: add driver for Intel Apollo Lake SoC This adds a driver for GPIO controller on the Intel Apollo Lake SoC. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-09-19 19:15:12 +02:00
properties:
reg:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: true
gpio: add driver for Intel Apollo Lake SoC This adds a driver for GPIO controller on the Intel Apollo Lake SoC. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-09-19 19:15:12 +02:00
label:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: true
gpio: add driver for Intel Apollo Lake SoC This adds a driver for GPIO controller on the Intel Apollo Lake SoC. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-09-19 19:15:12 +02:00
drivers/gpio/gpio_intel_apl: remove dependency on shared interrupts The GPIO driver for the Intel Apollo Lake has so many pins it has to export ten devices to shoehorn its one device into the GPIO API. The current implementation uses the shared IRQ driver because these pseudodevices all share one IRQ. However, since the GPIO driver is aware of all the possible interrupt sources, it's smaller and faster (and not even messy) to handle it internally, so this patch eliminates the dependency on the shared IRQ driver. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-04-22 05:59:40 +02:00
interrupts:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 00:22:01 +02:00
required: true
drivers/gpio/gpio_intel_apl: remove dependency on shared interrupts The GPIO driver for the Intel Apollo Lake has so many pins it has to export ten devices to shoehorn its one device into the GPIO API. The current implementation uses the shared IRQ driver because these pseudodevices all share one IRQ. However, since the GPIO driver is aware of all the possible interrupt sources, it's smaller and faster (and not even messy) to handle it internally, so this patch eliminates the dependency on the shared IRQ driver. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-04-22 05:59:40 +02:00
x86: apollo_lake: changes GPIO definition in DTS This breaks down the GPIO controller definition in DTS into multiple entries. This allows these controllers to be referenced by other DTS, and test board overlay files. And also we can remove the entries in the dts fixup file. Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2019-12-12 05:37:04 +01:00
ngpios:
required: true
pin-offset:
type: int
required: true
description: Pin offset of this GPIO entry
dts/bindings: use const to validate #<FOO>-cells In most cases #<FOO>-cells should be a constant. For example in spi controller #address-cells should be 1, and #size-cells should be 0. Use the const attribute to specify such single known values. Add const value to missing bindings which have cells. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-09 21:54:26 +02:00
"#gpio-cells":
const: 2
scripts: dts: Generalize '#cells' to allow multiple sources Implement a nice generalization suggested by Bobby Noelte. Instead of having a generic #cells key in bindings, have source-specific *-cells keys. Some examples: interrupt-cells: - irq - priority - flags gpio-cells: - pin - flags pwm-cells: - channel - period This makes bindings a bit easier to read, and allows a node to be a controller for many different 'phandle-array' properties. The prefix before *-cells is derived from the property name, meaning there's no fixed set of *-cells keys. This is possible because of the earlier 'phandle-array' generalization. The older #cells key is supported for backwards compatibility, but generates a deprecation warning. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-09-26 20:34:13 +02:00
gpio-cells:
gpio: add driver for Intel Apollo Lake SoC This adds a driver for GPIO controller on the Intel Apollo Lake SoC. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-09-19 19:15:12 +02:00
- pin
- flags
Copy permalink