2011-11-21 17:12:45 -05:00
|
|
|
# TARGET_FLAGS are to be passed while compiling, assembling, linking.
|
|
|
|
|
TARGET_FLAGS :=
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
# TARGET_LDFLAGS go to the linker
|
|
|
|
|
TARGET_LDFLAGS :=
|
2011-09-13 01:32:09 -04:00
|
|
|
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
# Configuration derived from $(MEMORY_TARGET)
|
2011-09-13 01:32:09 -04:00
|
|
|
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
LD_SCRIPT_PATH := $(LDDIR)/$(MEMORY_TARGET).ld
|
2011-09-13 01:32:09 -04:00
|
|
|
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
ifeq ($(MEMORY_TARGET), ram)
|
|
|
|
|
VECT_BASE_ADDR := VECT_TAB_RAM
|
2011-09-13 01:32:09 -04:00
|
|
|
endif
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
ifeq ($(MEMORY_TARGET), flash)
|
|
|
|
|
VECT_BASE_ADDR := VECT_TAB_FLASH
|
2011-09-13 01:32:09 -04:00
|
|
|
endif
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
ifeq ($(MEMORY_TARGET), jtag)
|
|
|
|
|
VECT_BASE_ADDR := VECT_TAB_BASE
|
2011-09-17 20:23:41 +02:00
|
|
|
endif
|
|
|
|
|
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
# Pull in the board configuration file here, so it can override the
|
|
|
|
|
# above.
|
2011-11-15 02:43:01 -05:00
|
|
|
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
include $(BOARD_INCLUDE_DIR)/$(BOARD).mk
|
2011-11-15 02:43:01 -05:00
|
|
|
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
# Configuration derived from $(BOARD).mk
|
2011-09-13 01:32:09 -04:00
|
|
|
|
2011-11-29 14:31:31 -05:00
|
|
|
LD_SERIES_PATH := $(LDDIR)/stm32/series/$(MCU_SERIES)
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
LD_MEM_PATH := $(LDDIR)/stm32/mem/$(LD_MEM_DIR)
|
2011-11-29 14:31:31 -05:00
|
|
|
ifeq ($(MCU_SERIES), stm32f1)
|
2012-06-03 06:00:41 -04:00
|
|
|
# Due to the Balkanization on F1, we need to specify the line when
|
|
|
|
|
# making linker decisions.
|
|
|
|
|
LD_SERIES_PATH := $(LD_SERIES_PATH)/$(MCU_F1_LINE)
|
2011-09-13 01:32:09 -04:00
|
|
|
endif
|
|
|
|
|
|
2012-08-05 14:39:34 -04:00
|
|
|
ifeq ($(MCU_SERIES), stm32f1)
|
|
|
|
|
TARGET_FLAGS += -mcpu=cortex-m3 -march=armv7-m
|
|
|
|
|
endif
|
|
|
|
|
ifeq ($(MCU_SERIES), stm32f2)
|
|
|
|
|
TARGET_FLAGS += -mcpu=cortex-m3 -march=armv7-m
|
|
|
|
|
endif
|
|
|
|
|
ifeq ($(MCU_SERIES), stm32f4)
|
|
|
|
|
TARGET_FLAGS += -mcpu=cortex-m4 -march=armv7e-m -mfloat-abi=hard -mfpu=fpv4-sp-d16
|
|
|
|
|
endif
|
|
|
|
|
|
Merge branch 'wip-family-support'
Merge the long-lived (too long; future changes like these will need to
proceed more incrementally) development branch of libmaple, containing
experimental STM32F2 and STM32F1 value line support, into master.
This required many changes to the structure of the library. The most
important structural reorganizations occurred in:
- 954f9e5: moves public headers to include directories
- 3efa313: uses "series" instead of "family"
- c0d60e3: adds board files to the build system, to make it easier to
add new boards
- 096d86c: adds build logic for targeting different STM32 series
(e.g. STM32F1, STM32F2)
This last commit in particular (096d86c) is the basis for the
repartitioning of libmaple into portable sections, which work on all
supported MCUs, and nonportable sections, which are segregated into
separate directories and contain all series-specific code. Moving
existing STM32F1-only code into libmaple/stm32f1 and wirish/stm32f1,
along with adding equivalents under .../stm32f2 directories, was the
principal project of this branch.
Important API changes occur in several places. Existing code is still
expected to work on STM32F1 targets, but there have been many
deprecations. A detailed changelog explaining the situation needs to
be prepared.
F2 and F1 value line support is not complete; the merge is proceeding
prematurely in this respect. We've been getting more libmaple patches
from the community lately, and I'm worried that the merge conflicts
with the old tree structure will become painful to manage.
Conflicts:
Makefile
Resolved Makefile conflicts manually; this required propagating
-Xlinker usage into support/make/target-config.mk.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-26 18:24:49 -04:00
|
|
|
TARGET_LDFLAGS += -Xlinker -T$(LD_SCRIPT_PATH) \
|
2012-06-26 23:16:29 -04:00
|
|
|
-L $(LD_SERIES_PATH) \
|
|
|
|
|
-L $(LD_MEM_PATH) \
|
|
|
|
|
-L $(LDDIR)
|
2012-08-05 14:39:34 -04:00
|
|
|
TARGET_FLAGS += -mthumb -DBOARD_$(BOARD) -DMCU_$(MCU) \
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
-DERROR_LED_PORT=$(ERROR_LED_PORT) \
|
|
|
|
|
-DERROR_LED_PIN=$(ERROR_LED_PIN) \
|
|
|
|
|
-D$(VECT_BASE_ADDR)
|
2011-11-21 17:12:45 -05:00
|
|
|
|
Rework linker scripts.
Having separate linker scripts for all the boards is a bad idea. Most
boards really only need to specify MEMORY and the appropriate
REGION_ALIASES() so that support/ld/common.inc can do its work. Not
having infrastructure for this leads to duplication -- viz. the Maple
Mini linker scripts are identical to the Maple's, and the
olimex_stm32_h103 linker directory is just a symlink to
Maple's. Clearly, the current structure is wrong.
To fix it, instead of having per-board subdirectories of support/ld/,
add per-MEMORY subdirectories of (new) support/ld/stm32/mem/. The
per-board .mk files under support/mk/board-includes/ now reference
these directly, and target-config.mk and the Makefile handle this
appropriately. We move some other stuff around in target-config.mk to
make this all more convenient, and even allow more overriding of the
libmaple defaults on a per-board basis. Custom board hacks will be
easier now.
Unfortunately, lots of duplication under support/ld/stm32/mem/ is
necessary, as the LENGTH attribute in a MEMORY region specification
doesn't support arithmetic expressions, and ld doesn't seem to have
any way to specify MEMORY at the command line (why?!). If we find a
better way than this, we should do it.
If a board (e.g. Maple Native) _does_ really need special
memory-related configuration, you can always put a per-board
subdirectory of support/ld/stm32/mem. We do this here to configure the
heap.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
2012-06-06 18:06:48 -04:00
|
|
|
LIBMAPLE_MODULE_SERIES := $(LIBMAPLE_PATH)/$(MCU_SERIES)
|
