f9a8a1dc0b
The free run timer will be used to count before entering hibernate mode. Move the related registers to the head file for accessing. Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
2072 lines
73 KiB
C
2072 lines
73 KiB
C
/*
|
|
* Copyright (c) 2020 ITE Corporation. All Rights Reserved.
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#ifndef CHIP_CHIPREGS_H
|
|
#define CHIP_CHIPREGS_H
|
|
|
|
#include <sys/util.h>
|
|
|
|
#define EC_REG_BASE_ADDR 0x00f00000
|
|
|
|
#ifndef FALSE
|
|
#define FALSE 0
|
|
#endif
|
|
|
|
/* TRUE can be defined as !FALSE but defining
|
|
* it as 1 allows it to fit into a bitfield.
|
|
*/
|
|
#ifndef TRUE
|
|
#define TRUE 1
|
|
#endif
|
|
|
|
#ifdef _ASMLANGUAGE
|
|
#define ECREG(x) x
|
|
#else
|
|
|
|
/*
|
|
* Macros for hardware registers access.
|
|
*/
|
|
#define ECREG(x) (*((volatile unsigned char *)(x)))
|
|
#define ECREG_u16(x) (*((volatile unsigned short *)(x)))
|
|
#define ECREG_u32(x) (*((volatile unsigned long *)(x)))
|
|
|
|
/*
|
|
* MASK operation macros
|
|
*/
|
|
#define SET_MASK(reg, bit_mask) ((reg) |= (bit_mask))
|
|
#define CLEAR_MASK(reg, bit_mask) ((reg) &= (~(bit_mask)))
|
|
#define IS_MASK_SET(reg, bit_mask) (((reg) & (bit_mask)) != 0)
|
|
#endif /* _ASMLANGUAGE */
|
|
|
|
#ifndef REG_BASE_ADDR
|
|
#define REG_BASE_ADDR EC_REG_BASE_ADDR
|
|
#endif
|
|
|
|
/**
|
|
* (10XXh) Shared Memory Flash Interface Bridge (SMFI)
|
|
*/
|
|
|
|
/* FBIU Configuration */
|
|
#define FBCFG ECREG(EC_REG_BASE_ADDR + 0x1000)
|
|
#define SSMC BIT(7)
|
|
|
|
/* Flash Programming Configuration Register*/
|
|
#define FPCFG ECREG(EC_REG_BASE_ADDR + 0x1001)
|
|
|
|
/* Memory Zone Configuration */
|
|
#define MZCFG ECREG(EC_REG_BASE_ADDR + 0x1002)
|
|
|
|
/* State Memory Zone Configuration */
|
|
#define SMZCFG ECREG(EC_REG_BASE_ADDR + 0x1003)
|
|
|
|
/* Flash EC Code Banking Select Register */
|
|
#define FECBSR ECREG(EC_REG_BASE_ADDR + 0x1005)
|
|
|
|
/* Flash Memory Size Select Registe */
|
|
#define FMSSR ECREG(EC_REG_BASE_ADDR + 0x1007)
|
|
|
|
/* Flash Memory Pre-Scale */
|
|
#define FMPSR ECREG(EC_REG_BASE_ADDR + 0x1010)
|
|
|
|
/* Shared Memory EC Control and Status */
|
|
#define SMECCS ECREG(EC_REG_BASE_ADDR + 0x1020)
|
|
#define HOSTWA BIT(5)
|
|
#define LKPRR BIT(2)
|
|
|
|
/* Shared Memory Host Semaphore */
|
|
#define SMHSR ECREG(EC_REG_BASE_ADDR + 0x1022)
|
|
|
|
/* FWH Flash ID Register */
|
|
#define FWHFIDR ECREG(EC_REG_BASE_ADDR + 0x1030)
|
|
|
|
/* Flash Control Register 1 */
|
|
#define FLHCTRL1R ECREG(EC_REG_BASE_ADDR + 0x1031)
|
|
|
|
/* SPI Flash Read Mode
|
|
* 11b: Uses “Fast Read Dual Input/Output (DIOFR)” cycle (instruction = BBh)
|
|
* 10b: Uses “Fast Read Dual Output (DOFR)” cycle (instruction = 3Bh)
|
|
* 01b: Uses “Fast Read (FREAD)” cycle (instruction = 0Bh)
|
|
* 00b: Uses “Read” cycle (instruction = 03h)
|
|
*/
|
|
#define SPIFR1 BIT(5)
|
|
#define SPIFR0 BIT(4)
|
|
/* Serial Wait 1T */
|
|
#define LFSW1T BIT(3)
|
|
|
|
/* Flash Control Register 2 */
|
|
#define FLHCTRL2R ECREG(EC_REG_BASE_ADDR + 0x1032)
|
|
|
|
/* 256 bytes cache */
|
|
#define DCACHE ECREG(EC_REG_BASE_ADDR + 0x1033)
|
|
|
|
/* uC Control Register */
|
|
#define UCCTRLR ECREG(EC_REG_BASE_ADDR + 0x1034)
|
|
|
|
/* Host Control 2 Register */
|
|
#define HCTRL2R ECREG(EC_REG_BASE_ADDR + 0x1036)
|
|
|
|
/* HSPI Control 2 Register */
|
|
#define HSPICTRL2R ECREG(EC_REG_BASE_ADDR + 0x1039)
|
|
|
|
/* HSPI */
|
|
#define HSPICTRL3R ECREG(EC_REG_BASE_ADDR + 0x103A)
|
|
|
|
/* EC-Indirect Memory Address Register 0 */
|
|
#define ECINDAR0 ECREG(EC_REG_BASE_ADDR + 0x103B)
|
|
|
|
/* EC-Indirect Memory Address Register 1 */
|
|
#define ECINDAR1 ECREG(EC_REG_BASE_ADDR + 0x103C)
|
|
|
|
/* EC-Indirect Memory Address Register 2 */
|
|
#define ECINDAR2 ECREG(EC_REG_BASE_ADDR + 0x103D)
|
|
|
|
/* EC-Indirect Memory Address Register 3 */
|
|
#define ECINDAR3 ECREG(EC_REG_BASE_ADDR + 0x103E)
|
|
|
|
/* EC-Indirect Memory Data Register */
|
|
#define ECINDDR ECREG(EC_REG_BASE_ADDR + 0x103F)
|
|
|
|
/* Scratch SRAM 0 Address Low Byte Register */
|
|
#define SCRA0L ECREG(EC_REG_BASE_ADDR + 0x1040)
|
|
|
|
/* Scratch SRAM 0 Address Middle Byte Register */
|
|
#define SCRA0M ECREG(EC_REG_BASE_ADDR + 0x1041)
|
|
|
|
/* Scratch SRAM 0 Address High Byte Register */
|
|
#define SCRA0H ECREG(EC_REG_BASE_ADDR + 0x1042)
|
|
|
|
/* Scratch SRAM 1 Address Low Byte Register */
|
|
#define SCRA1L ECREG(EC_REG_BASE_ADDR + 0x1043)
|
|
|
|
/* Scratch SRAM 1 Address Middle Byte Register */
|
|
#define SCRA1M ECREG(EC_REG_BASE_ADDR + 0x1044)
|
|
|
|
/* Scratch SRAM 1 Address High Byte Register */
|
|
#define SCRA1H ECREG(EC_REG_BASE_ADDR + 0x1045)
|
|
|
|
/* Scratch SRAM 2 Address Low Byte Register */
|
|
#define SCRA2L ECREG(EC_REG_BASE_ADDR + 0x1046)
|
|
|
|
/* Scratch SRAM 2 Address Middle Byte Register */
|
|
#define SCRA2M ECREG(EC_REG_BASE_ADDR + 0x1047)
|
|
|
|
/* Scratch SRAM 2 Address High Byte Register */
|
|
#define SCRA2H ECREG(EC_REG_BASE_ADDR + 0x1048)
|
|
|
|
/* Scratch SRAM 3 Address Low Byte Register */
|
|
#define SCRA3L ECREG(EC_REG_BASE_ADDR + 0x1049)
|
|
|
|
/* Scratch SRAM 3 Address Middle Byte Register */
|
|
#define SCRA3M ECREG(EC_REG_BASE_ADDR + 0x104A)
|
|
|
|
/* Scratch SRAM 3 Address High Byte Register */
|
|
#define SCRA3H ECREG(EC_REG_BASE_ADDR + 0x104B)
|
|
|
|
/* Scratch SRAM 4 Address Low Byte Register */
|
|
#define SCRA4L ECREG(EC_REG_BASE_ADDR + 0x104C)
|
|
|
|
/* Scratch SRAM 4 Address Middle Byte Register */
|
|
#define SCRA4M ECREG(EC_REG_BASE_ADDR + 0x104D)
|
|
|
|
/* Scratch SRAM 4 Address High Byte Register */
|
|
#define SCRA4H ECREG(EC_REG_BASE_ADDR + 0x104E)
|
|
|
|
/* Protect 0 Base Addr Register 0 */
|
|
#define P0BA0R ECREG(EC_REG_BASE_ADDR + 0x104F)
|
|
|
|
/* Protect 0 Base Addr Register 1 */
|
|
#define P0BA1R ECREG(EC_REG_BASE_ADDR + 0x1050)
|
|
|
|
/* Protect 0 Size Register */
|
|
#define P0ZR ECREG(EC_REG_BASE_ADDR + 0x1051)
|
|
|
|
/* Protect 1 Base Addr Register 0 */
|
|
#define P1BA0R ECREG(EC_REG_BASE_ADDR + 0x1052)
|
|
|
|
/* Protect 1 Base Addr Register 1 */
|
|
#define P1BA1R ECREG(EC_REG_BASE_ADDR + 0x1053)
|
|
|
|
/* Protect 1 Size Register */
|
|
#define P1ZR ECREG(EC_REG_BASE_ADDR + 0x1054)
|
|
|
|
/* Deferred SPI Instruction */
|
|
#define DSINST ECREG(EC_REG_BASE_ADDR + 0x1055)
|
|
|
|
/* Deferred SPI Address */
|
|
#define DSADR1 ECREG(EC_REG_BASE_ADDR + 0x1056)
|
|
|
|
/* Deferred SPI Address */
|
|
#define DSADR2 ECREG(EC_REG_BASE_ADDR + 0x1057)
|
|
|
|
/* Host Instruction Control 1 */
|
|
#define HINSTC1 ECREG(EC_REG_BASE_ADDR + 0x1058)
|
|
#define DISSV BIT(3)
|
|
#define DISS BIT(2)
|
|
#define ENDPI BIT(1)
|
|
#define ENDEI BIT(0)
|
|
|
|
/* Host Instruction Control 2 */
|
|
#define HINSTC2 ECREG(EC_REG_BASE_ADDR + 0x1059)
|
|
#define DISEID8 BIT(3)
|
|
#define DISEID7 BIT(2)
|
|
#define DISEI52 BIT(1)
|
|
#define DISEI20 BIT(0)
|
|
|
|
/* Host RAM Window Control */
|
|
#define HRAMWC ECREG(EC_REG_BASE_ADDR + 0x105A)
|
|
/* Window 0 enabled */
|
|
#define WINDOW0EN BIT(0)
|
|
/* Window 1 enabled */
|
|
#define WINDOW1EN BIT(1)
|
|
/* 0 : H2RAM-HLPC selected, 1 : H2RAM-HSPI selected */
|
|
#define H2RAMS BIT(4)
|
|
|
|
/* Host RAM Winodw 0 Base Address */
|
|
#define HRAMW0BA ECREG(EC_REG_BASE_ADDR + 0x105B)
|
|
/* Host RAM Window 1 Base Address */
|
|
#define HRAMW1BA ECREG(EC_REG_BASE_ADDR + 0x105C)
|
|
/* Host RAM Window 0 Access Allow Size */
|
|
#define HRAMW0AAS ECREG(EC_REG_BASE_ADDR + 0x105D)
|
|
/* Host RAM Window 1 Access Allow Size */
|
|
#define HRAMW1AAS ECREG(EC_REG_BASE_ADDR + 0x105E)
|
|
#define HOSTRAMSIZE16BYTE 0x00
|
|
#define HOSTRAMSIZE32BYTE 0x01
|
|
#define HOSTRAMSIZE64BYTE 0x02
|
|
#define HOSTRAMSIZE128BYTE 0x03
|
|
#define HOSTRAMSIZE256BYTE 0x04
|
|
#define HOSTRAMSIZE512BYTE 0x05
|
|
#define HOSTRAMSIZE1024BYTE 0x06
|
|
#define HOSTRAMSIZE2048BYTE 0x07
|
|
|
|
#define CHECK64KSRAM ECREG(EC_REG_BASE_ADDR + 0x1060)
|
|
#define CRC_HBYTE ECREG(EC_REG_BASE_ADDR + 0x1061)
|
|
#define CRC_LBYTE ECREG(EC_REG_BASE_ADDR + 0x1062)
|
|
#define FLHCTRL3R ECREG(EC_REG_BASE_ADDR + 0x1063)
|
|
#define FLHCTRL4R ECREG(EC_REG_BASE_ADDR + 0x1064)
|
|
#define P2BA0R ECREG(EC_REG_BASE_ADDR + 0x1070)
|
|
#define P2BA1R ECREG(EC_REG_BASE_ADDR + 0x1071)
|
|
#define P2ZR ECREG(EC_REG_BASE_ADDR + 0x1072)
|
|
#define P3BA0R ECREG(EC_REG_BASE_ADDR + 0x1073)
|
|
#define P3BA1R ECREG(EC_REG_BASE_ADDR + 0x1074)
|
|
#define P3ZR ECREG(EC_REG_BASE_ADDR + 0x1075)
|
|
#define HRAMW2BA ECREG(EC_REG_BASE_ADDR + 0x1076)
|
|
#define HRAMW3BA ECREG(EC_REG_BASE_ADDR + 0x1077)
|
|
#define HRAMW2AAS ECREG(EC_REG_BASE_ADDR + 0x1078)
|
|
#define HRAMW3AAS ECREG(EC_REG_BASE_ADDR + 0x1079)
|
|
#define H2RAMECSIE ECREG(EC_REG_BASE_ADDR + 0x107A)
|
|
#define H2RAMECSA ECREG(EC_REG_BASE_ADDR + 0x107B)
|
|
#define H2RAMHSS ECREG(EC_REG_BASE_ADDR + 0x107C)
|
|
#define HPADR ECREG(EC_REG_BASE_ADDR + 0x107E)
|
|
#define STCDMACR ECREG(EC_REG_BASE_ADDR + 0x1080)
|
|
#define SCRA5L ECREG(EC_REG_BASE_ADDR + 0x1081)
|
|
#define SCRA5M ECREG(EC_REG_BASE_ADDR + 0x1082)
|
|
#define SCRA5H ECREG(EC_REG_BASE_ADDR + 0x1083)
|
|
#define SCRA6L ECREG(EC_REG_BASE_ADDR + 0x1084)
|
|
#define SCRA6M ECREG(EC_REG_BASE_ADDR + 0x1085)
|
|
#define SCRA6H ECREG(EC_REG_BASE_ADDR + 0x1086)
|
|
#define SCRA7L ECREG(EC_REG_BASE_ADDR + 0x1087)
|
|
#define SCRA7M ECREG(EC_REG_BASE_ADDR + 0x1088)
|
|
#define SCRA7H ECREG(EC_REG_BASE_ADDR + 0x1089)
|
|
#define SCRA8L ECREG(EC_REG_BASE_ADDR + 0x108A)
|
|
#define SCRA8M ECREG(EC_REG_BASE_ADDR + 0x108B)
|
|
#define SCRA8H ECREG(EC_REG_BASE_ADDR + 0x108C)
|
|
#define SCRA9L ECREG(EC_REG_BASE_ADDR + 0x108D)
|
|
#define SCRA9M ECREG(EC_REG_BASE_ADDR + 0x108E)
|
|
#define SCRA9H ECREG(EC_REG_BASE_ADDR + 0x108F)
|
|
#define SCRA10L ECREG(EC_REG_BASE_ADDR + 0x1090)
|
|
#define SCRA10M ECREG(EC_REG_BASE_ADDR + 0x1091)
|
|
#define SCRA10H ECREG(EC_REG_BASE_ADDR + 0x1092)
|
|
#define SCRA11L ECREG(EC_REG_BASE_ADDR + 0x1093)
|
|
#define SCRA11M ECREG(EC_REG_BASE_ADDR + 0x1094)
|
|
#define SCRA11H ECREG(EC_REG_BASE_ADDR + 0x1095)
|
|
#define SCRA12L ECREG(EC_REG_BASE_ADDR + 0x1096)
|
|
#define SCRA12M ECREG(EC_REG_BASE_ADDR + 0x1097)
|
|
#define SCRA12H ECREG(EC_REG_BASE_ADDR + 0x1098)
|
|
#define ROMARL ECREG(EC_REG_BASE_ADDR + 0x1099)
|
|
#define ROMARM ECREG(EC_REG_BASE_ADDR + 0x109A)
|
|
#define ROMARH ECREG(EC_REG_BASE_ADDR + 0x109B)
|
|
#define SEMBARL ECREG(EC_REG_BASE_ADDR + 0x109C)
|
|
#define SEMBARM ECREG(EC_REG_BASE_ADDR + 0x109D)
|
|
#define SEMBARH ECREG(EC_REG_BASE_ADDR + 0x109E)
|
|
#define SCRATH_SRAM 0x08
|
|
|
|
/* --- General Control (GCTRL) --- */
|
|
#define IT8XXX2_GCTRL_BASE 0x00F02000
|
|
#define IT8XXX2_GCTRL_EIDSR ECREG(IT8XXX2_GCTRL_BASE + 0x31)
|
|
|
|
/**
|
|
*
|
|
* (11xxh) Interrupt controller (INTC)
|
|
*
|
|
*/
|
|
#define ISR0 ECREG(EC_REG_BASE_ADDR + 0x3F00)
|
|
#define ISR1 ECREG(EC_REG_BASE_ADDR + 0x3F01)
|
|
#define ISR2 ECREG(EC_REG_BASE_ADDR + 0x3F02)
|
|
#define ISR3 ECREG(EC_REG_BASE_ADDR + 0x3F03)
|
|
#define ISR4 ECREG(EC_REG_BASE_ADDR + 0x3F14)
|
|
#define ISR5 ECREG(EC_REG_BASE_ADDR + 0x3F18)
|
|
#define ISR6 ECREG(EC_REG_BASE_ADDR + 0x3F1C)
|
|
#define ISR7 ECREG(EC_REG_BASE_ADDR + 0x3F20)
|
|
#define ISR8 ECREG(EC_REG_BASE_ADDR + 0x3F24)
|
|
#define ISR9 ECREG(EC_REG_BASE_ADDR + 0x3F28)
|
|
#define ISR10 ECREG(EC_REG_BASE_ADDR + 0x3F2C)
|
|
#define ISR11 ECREG(EC_REG_BASE_ADDR + 0x3F30)
|
|
#define ISR12 ECREG(EC_REG_BASE_ADDR + 0x3F34)
|
|
#define ISR13 ECREG(EC_REG_BASE_ADDR + 0x3F38)
|
|
#define ISR14 ECREG(EC_REG_BASE_ADDR + 0x3F3C)
|
|
#define ISR15 ECREG(EC_REG_BASE_ADDR + 0x3F40)
|
|
#define ISR16 ECREG(EC_REG_BASE_ADDR + 0x3F44)
|
|
#define ISR17 ECREG(EC_REG_BASE_ADDR + 0x3F48)
|
|
#define ISR18 ECREG(EC_REG_BASE_ADDR + 0x3F4C)
|
|
#define ISR19 ECREG(EC_REG_BASE_ADDR + 0x3F50)
|
|
#define ISR20 ECREG(EC_REG_BASE_ADDR + 0x3F54)
|
|
#define ISR21 ECREG(EC_REG_BASE_ADDR + 0x3F58)
|
|
#define ISR22 ECREG(EC_REG_BASE_ADDR + 0x3F5C)
|
|
#define ISR23 ECREG(EC_REG_BASE_ADDR + 0x3F90)
|
|
|
|
#define IER0 ECREG(EC_REG_BASE_ADDR + 0x3F04)
|
|
#define IER1 ECREG(EC_REG_BASE_ADDR + 0x3F05)
|
|
#define IER2 ECREG(EC_REG_BASE_ADDR + 0x3F06)
|
|
#define IER3 ECREG(EC_REG_BASE_ADDR + 0x3F07)
|
|
#define IER4 ECREG(EC_REG_BASE_ADDR + 0x3F15)
|
|
#define IER5 ECREG(EC_REG_BASE_ADDR + 0x3F19)
|
|
#define IER6 ECREG(EC_REG_BASE_ADDR + 0x3F1D)
|
|
#define IER7 ECREG(EC_REG_BASE_ADDR + 0x3F21)
|
|
#define IER8 ECREG(EC_REG_BASE_ADDR + 0x3F25)
|
|
#define IER9 ECREG(EC_REG_BASE_ADDR + 0x3F29)
|
|
#define IER10 ECREG(EC_REG_BASE_ADDR + 0x3F2D)
|
|
#define IER11 ECREG(EC_REG_BASE_ADDR + 0x3F31)
|
|
#define IER12 ECREG(EC_REG_BASE_ADDR + 0x3F35)
|
|
#define IER13 ECREG(EC_REG_BASE_ADDR + 0x3F39)
|
|
#define IER14 ECREG(EC_REG_BASE_ADDR + 0x3F3D)
|
|
#define IER15 ECREG(EC_REG_BASE_ADDR + 0x3F41)
|
|
#define IER16 ECREG(EC_REG_BASE_ADDR + 0x3F45)
|
|
#define IER17 ECREG(EC_REG_BASE_ADDR + 0x3F49)
|
|
#define IER18 ECREG(EC_REG_BASE_ADDR + 0x3F4D)
|
|
#define IER19 ECREG(EC_REG_BASE_ADDR + 0x3F51)
|
|
#define IER20 ECREG(EC_REG_BASE_ADDR + 0x3F55)
|
|
#define IER21 ECREG(EC_REG_BASE_ADDR + 0x3F59)
|
|
#define IER22 ECREG(EC_REG_BASE_ADDR + 0x3F5D)
|
|
#define IER23 ECREG(EC_REG_BASE_ADDR + 0x3F91)
|
|
|
|
#define IELMR0 ECREG(EC_REG_BASE_ADDR + 0x3F08)
|
|
#define IELMR1 ECREG(EC_REG_BASE_ADDR + 0x3F09)
|
|
#define IELMR2 ECREG(EC_REG_BASE_ADDR + 0x3F0A)
|
|
#define IELMR3 ECREG(EC_REG_BASE_ADDR + 0x3F0B)
|
|
#define IELMR4 ECREG(EC_REG_BASE_ADDR + 0x3F16)
|
|
#define IELMR5 ECREG(EC_REG_BASE_ADDR + 0x3F1A)
|
|
#define IELMR6 ECREG(EC_REG_BASE_ADDR + 0x3F1E)
|
|
#define IELMR7 ECREG(EC_REG_BASE_ADDR + 0x3F22)
|
|
#define IELMR8 ECREG(EC_REG_BASE_ADDR + 0x3F26)
|
|
#define IELMR9 ECREG(EC_REG_BASE_ADDR + 0x3F2A)
|
|
#define IELMR10 ECREG(EC_REG_BASE_ADDR + 0x3F2E)
|
|
#define IELMR11 ECREG(EC_REG_BASE_ADDR + 0x3F32)
|
|
#define IELMR12 ECREG(EC_REG_BASE_ADDR + 0x3F36)
|
|
#define IELMR13 ECREG(EC_REG_BASE_ADDR + 0x3F3A)
|
|
#define IELMR14 ECREG(EC_REG_BASE_ADDR + 0x3F3E)
|
|
#define IELMR15 ECREG(EC_REG_BASE_ADDR + 0x3F42)
|
|
#define IELMR16 ECREG(EC_REG_BASE_ADDR + 0x3F46)
|
|
#define IELMR17 ECREG(EC_REG_BASE_ADDR + 0x3F4A)
|
|
#define IELMR18 ECREG(EC_REG_BASE_ADDR + 0x3F4E)
|
|
#define IELMR19 ECREG(EC_REG_BASE_ADDR + 0x3F52)
|
|
#define IELMR20 ECREG(EC_REG_BASE_ADDR + 0x3F56)
|
|
#define IELMR21 ECREG(EC_REG_BASE_ADDR + 0x3F5A)
|
|
#define IELMR22 ECREG(EC_REG_BASE_ADDR + 0x3F5E)
|
|
#define IELMR23 ECREG(EC_REG_BASE_ADDR + 0x3F92)
|
|
|
|
#define IPOLR0 ECREG(EC_REG_BASE_ADDR + 0x3F0C)
|
|
#define IPOLR1 ECREG(EC_REG_BASE_ADDR + 0x3F0D)
|
|
#define IPOLR2 ECREG(EC_REG_BASE_ADDR + 0x3F0E)
|
|
#define IPOLR3 ECREG(EC_REG_BASE_ADDR + 0x3F0F)
|
|
#define IPOLR4 ECREG(EC_REG_BASE_ADDR + 0x3F17)
|
|
#define IPOLR5 ECREG(EC_REG_BASE_ADDR + 0x3F1B)
|
|
#define IPOLR6 ECREG(EC_REG_BASE_ADDR + 0x3F1F)
|
|
#define IPOLR7 ECREG(EC_REG_BASE_ADDR + 0x3F23)
|
|
#define IPOLR8 ECREG(EC_REG_BASE_ADDR + 0x3F27)
|
|
#define IPOLR9 ECREG(EC_REG_BASE_ADDR + 0x3F2B)
|
|
#define IPOLR10 ECREG(EC_REG_BASE_ADDR + 0x3F2F)
|
|
#define IPOLR11 ECREG(EC_REG_BASE_ADDR + 0x3F33)
|
|
#define IPOLR12 ECREG(EC_REG_BASE_ADDR + 0x3F37)
|
|
#define IPOLR13 ECREG(EC_REG_BASE_ADDR + 0x3F3B)
|
|
#define IPOLR14 ECREG(EC_REG_BASE_ADDR + 0x3F3F)
|
|
#define IPOLR15 ECREG(EC_REG_BASE_ADDR + 0x3F43)
|
|
#define IPOLR16 ECREG(EC_REG_BASE_ADDR + 0x3F47)
|
|
#define IPOLR17 ECREG(EC_REG_BASE_ADDR + 0x3F4B)
|
|
#define IPOLR18 ECREG(EC_REG_BASE_ADDR + 0x3F4F)
|
|
#define IPOLR19 ECREG(EC_REG_BASE_ADDR + 0x3F53)
|
|
#define IPOLR20 ECREG(EC_REG_BASE_ADDR + 0x3F57)
|
|
#define IPOLR21 ECREG(EC_REG_BASE_ADDR + 0x3F5B)
|
|
#define IPOLR22 ECREG(EC_REG_BASE_ADDR + 0x3F5F)
|
|
#define IPOLR23 ECREG(EC_REG_BASE_ADDR + 0x3F93)
|
|
|
|
#define IVECT ECREG(EC_REG_BASE_ADDR + 0x3F10)
|
|
|
|
/**
|
|
*
|
|
* (12xxh) EC Access to ost Controlled Modules (EC2I Bridge)
|
|
*
|
|
*/
|
|
#define IHIOA ECREG(EC_REG_BASE_ADDR + 0x1200)
|
|
#define IHD ECREG(EC_REG_BASE_ADDR + 0x1201)
|
|
#define LSIOHA ECREG(EC_REG_BASE_ADDR + 0x1202)
|
|
#define SIOLV ECREG(EC_REG_BASE_ADDR + 0x1203)
|
|
#define IBMAE ECREG(EC_REG_BASE_ADDR + 0x1204)
|
|
#define IBCTL ECREG(EC_REG_BASE_ADDR + 0x1205)
|
|
|
|
/* Lock Super I/O Host Access Register */
|
|
#define LKCFG BIT(0)
|
|
|
|
/* Super I/O Access Lock Violation Register */
|
|
#define CFGLV BIT(0)
|
|
|
|
/* EC to I-Bus Modules Access Enable Register */
|
|
#define SWUCAE BIT(2)
|
|
#define CFGAE BIT(0)
|
|
|
|
/* I-Bus Control Register */
|
|
#define CWIB BIT(2)
|
|
#define CRIB BIT(1)
|
|
#define CSAE BIT(0)
|
|
|
|
/**
|
|
*
|
|
* (13xxh) Keyboard Controller (KBC)
|
|
*
|
|
*/
|
|
#define KBHICR ECREG(EC_REG_BASE_ADDR + 0x1300)
|
|
#define KBIRQR ECREG(EC_REG_BASE_ADDR + 0x1302)
|
|
#define KBHISR ECREG(EC_REG_BASE_ADDR + 0x1304)
|
|
#define KBHIKDOR ECREG(EC_REG_BASE_ADDR + 0x1306)
|
|
#define KBHIMDOR ECREG(EC_REG_BASE_ADDR + 0x1308)
|
|
#define KBHIDIR ECREG(EC_REG_BASE_ADDR + 0x130A)
|
|
|
|
/* KBC Host Interface Control Register*/
|
|
#define PM1ICIE BIT(6)
|
|
#define PM1OCIE BIT(5)
|
|
#define PM1HIE BIT(4)
|
|
#define IBFCIE BIT(3)
|
|
#define OBECIE BIT(2)
|
|
#define OBFMIE BIT(1)
|
|
#define OBFKIE BIT(0)
|
|
|
|
/* KBC Interrupt Control Register */
|
|
#define IRQNP BIT(6)
|
|
#define IRQ11B BIT(2)
|
|
#define IRQ12B BIT(1)
|
|
#define IRQ1B BIT(0)
|
|
|
|
/* KBC Host Interface Keyboard/Mouse Status Register */
|
|
#define PARE BIT(7)
|
|
#define GTIM BIT(6)
|
|
#define AOBF BIT(5)
|
|
#define KEYL BIT(4)
|
|
#define C_D BIT(3)
|
|
#define SYSF BIT(2)
|
|
#define IBF BIT(1)
|
|
#define OBF BIT(0)
|
|
|
|
/**
|
|
*
|
|
* (14xxh) System Wake-Up Control (SWUC)
|
|
*
|
|
*/
|
|
#define SWCTL1 ECREG(EC_REG_BASE_ADDR + 0x1400)
|
|
#define SWCTL2 ECREG(EC_REG_BASE_ADDR + 0x1402)
|
|
#define SWCTL3 ECREG(EC_REG_BASE_ADDR + 0x1404)
|
|
#define SWCBALR ECREG(EC_REG_BASE_ADDR + 0x1408)
|
|
#define SWCBAHR ECREG(EC_REG_BASE_ADDR + 0x140A)
|
|
#define SWCIER ECREG(EC_REG_BASE_ADDR + 0x140C)
|
|
#define SWCHSTR ECREG(EC_REG_BASE_ADDR + 0x140E)
|
|
#define SWCHIER ECREG(EC_REG_BASE_ADDR + 0x1410)
|
|
|
|
/**
|
|
*
|
|
* (14XXh) ISO14443 PICC Register
|
|
*
|
|
*/
|
|
#define PICC_BASE_ADDR (EC_REG_BASE_ADDR + 0x1400)
|
|
#define PATQA0SR ECREG(EC_REG_BASE_ADDR + 0x1400)
|
|
#define PATQA1SR ECREG(EC_REG_BASE_ADDR + 0x1401)
|
|
#define PSAKSR ECREG(EC_REG_BASE_ADDR + 0x1402)
|
|
#define PTRRR ECREG(EC_REG_BASE_ADDR + 0x1403)
|
|
#define PFDTA1R ECREG(EC_REG_BASE_ADDR + 0x141E)
|
|
#define PFDTA2R ECREG(EC_REG_BASE_ADDR + 0x141F)
|
|
#define PACCR ECREG(EC_REG_BASE_ADDR + 0x1404)
|
|
#define PIR ECREG(EC_REG_BASE_ADDR + 0x1405)
|
|
#define PICC_HF_ENABLE BIT(5)
|
|
#define PICC_HF_DISABLE BIT(4)
|
|
#define PICC_DATA_ERROR BIT(3)
|
|
#define PICC_RX_DONE BIT(2)
|
|
#define PICC_TX_DONE BIT(1)
|
|
#define PICC_ANTI_COLL_DONE BIT(0)
|
|
#define PIMR ECREG(EC_REG_BASE_ADDR + 0x1406)
|
|
#define PMCR ECREG(EC_REG_BASE_ADDR + 0x1407)
|
|
#define PTXCR ECREG(EC_REG_BASE_ADDR + 0x1408)
|
|
#define PRAMBA0R ECREG(EC_REG_BASE_ADDR + 0x140A)
|
|
#define PRAMBA1R ECREG(EC_REG_BASE_ADDR + 0x140B)
|
|
#define PTSR ECREG(EC_REG_BASE_ADDR + 0x140C)
|
|
#define PRTC0R ECREG(EC_REG_BASE_ADDR + 0x140E)
|
|
#define PRTC1R ECREG(EC_REG_BASE_ADDR + 0x140F)
|
|
#define PUID0R ECREG(EC_REG_BASE_ADDR + 0x1410)
|
|
#define PUID0R_ADDR (PICC_BASE_ADDR + 0x10)
|
|
#define PUID1R ECREG(EC_REG_BASE_ADDR + 0x1411)
|
|
#define PUID2R ECREG(EC_REG_BASE_ADDR + 0x1412)
|
|
#define PUID3R ECREG(EC_REG_BASE_ADDR + 0x1413)
|
|
#define PUID4R ECREG(EC_REG_BASE_ADDR + 0x1414)
|
|
#define PUID5R ECREG(EC_REG_BASE_ADDR + 0x1415)
|
|
#define PUID6R ECREG(EC_REG_BASE_ADDR + 0x1416)
|
|
#define PUID7R ECREG(EC_REG_BASE_ADDR + 0x1417)
|
|
#define PUID8R ECREG(EC_REG_BASE_ADDR + 0x1418)
|
|
#define PUID9R ECREG(EC_REG_BASE_ADDR + 0x1419)
|
|
#define PDER ECREG(EC_REG_BASE_ADDR + 0x141A)
|
|
#define PRC0R ECREG(EC_REG_BASE_ADDR + 0x141C)
|
|
#define PRC1R ECREG(EC_REG_BASE_ADDR + 0x141D)
|
|
|
|
/**
|
|
*
|
|
* (15xxh) Power Management Channel (PMC)
|
|
*
|
|
*/
|
|
/* PM1 */
|
|
#define PM1STS ECREG(EC_REG_BASE_ADDR + 0x1500)
|
|
#define PM1DO ECREG(EC_REG_BASE_ADDR + 0x1501)
|
|
#define PM1DOSCI ECREG(EC_REG_BASE_ADDR + 0x1502)
|
|
#define PM1DOSMI ECREG(EC_REG_BASE_ADDR + 0x1503)
|
|
#define PM1DI ECREG(EC_REG_BASE_ADDR + 0x1504)
|
|
#define PM1DISCI ECREG(EC_REG_BASE_ADDR + 0x1505)
|
|
#define PM1CTL ECREG(EC_REG_BASE_ADDR + 0x1506)
|
|
#define PM1IC ECREG(EC_REG_BASE_ADDR + 0x1507)
|
|
#define PM1IE ECREG(EC_REG_BASE_ADDR + 0x1508)
|
|
/* PM2 */
|
|
#define PM2STS ECREG(EC_REG_BASE_ADDR + 0x1510)
|
|
#define PM2DO ECREG(EC_REG_BASE_ADDR + 0x1511)
|
|
#define PM2DOSCI ECREG(EC_REG_BASE_ADDR + 0x1512)
|
|
#define PM2DOSMI ECREG(EC_REG_BASE_ADDR + 0x1513)
|
|
#define PM2DI ECREG(EC_REG_BASE_ADDR + 0x1514)
|
|
#define PM2DISCI ECREG(EC_REG_BASE_ADDR + 0x1515)
|
|
#define PM2CTL ECREG(EC_REG_BASE_ADDR + 0x1516)
|
|
#define PM2IC ECREG(EC_REG_BASE_ADDR + 0x1517)
|
|
#define PM2IE ECREG(EC_REG_BASE_ADDR + 0x1518)
|
|
/* Mailbox */
|
|
#define MBXCTRL ECREG(EC_REG_BASE_ADDR + 0x1519)
|
|
/* 16-byte PMC2EX Mailbox 0 ~ Mailbox 15 */
|
|
#define MBXEC_00 ECREG(EC_REG_BASE_ADDR + 0x15F0)
|
|
#define MBXEC_01 ECREG(EC_REG_BASE_ADDR + 0x15F1)
|
|
#define MBXEC_02 ECREG(EC_REG_BASE_ADDR + 0x15F2)
|
|
#define MBXEC_03 ECREG(EC_REG_BASE_ADDR + 0x15F3)
|
|
#define MBXEC_04 ECREG(EC_REG_BASE_ADDR + 0x15F4)
|
|
#define MBXEC_05 ECREG(EC_REG_BASE_ADDR + 0x15F5)
|
|
#define MBXEC_06 ECREG(EC_REG_BASE_ADDR + 0x15F6)
|
|
#define MBXEC_07 ECREG(EC_REG_BASE_ADDR + 0x15F7)
|
|
#define MBXEC_08 ECREG(EC_REG_BASE_ADDR + 0x15F8)
|
|
#define MBXEC_09 ECREG(EC_REG_BASE_ADDR + 0x15F9)
|
|
#define MBXEC_10 ECREG(EC_REG_BASE_ADDR + 0x15FA)
|
|
#define MBXEC_11 ECREG(EC_REG_BASE_ADDR + 0x15FB)
|
|
#define MBXEC_12 ECREG(EC_REG_BASE_ADDR + 0x15FC)
|
|
#define MBXEC_13 ECREG(EC_REG_BASE_ADDR + 0x15FD)
|
|
#define MBXEC_14 ECREG(EC_REG_BASE_ADDR + 0x15FE)
|
|
#define MBXEC_15 ECREG(EC_REG_BASE_ADDR + 0x15FF)
|
|
#define PM3STS ECREG(EC_REG_BASE_ADDR + 0x1520)
|
|
#define PM3DO ECREG(EC_REG_BASE_ADDR + 0x1521)
|
|
#define PM3DI ECREG(EC_REG_BASE_ADDR + 0x1522)
|
|
#define PM3CTL ECREG(EC_REG_BASE_ADDR + 0x1523)
|
|
#define PM3IC ECREG(EC_REG_BASE_ADDR + 0x1524)
|
|
#define PM3IE ECREG(EC_REG_BASE_ADDR + 0x1525)
|
|
#define PM4STS ECREG(EC_REG_BASE_ADDR + 0x1530)
|
|
#define PM4DO ECREG(EC_REG_BASE_ADDR + 0x1531)
|
|
#define PM4DI ECREG(EC_REG_BASE_ADDR + 0x1532)
|
|
#define PM4CTL ECREG(EC_REG_BASE_ADDR + 0x1533)
|
|
#define PM4IC ECREG(EC_REG_BASE_ADDR + 0x1534)
|
|
#define PM4IE ECREG(EC_REG_BASE_ADDR + 0x1535)
|
|
#define PM5STS ECREG(EC_REG_BASE_ADDR + 0x1540)
|
|
#define PM5DO ECREG(EC_REG_BASE_ADDR + 0x1541)
|
|
#define PM5DI ECREG(EC_REG_BASE_ADDR + 0x1542)
|
|
#define PM5CTL ECREG(EC_REG_BASE_ADDR + 0x1543)
|
|
#define PM5IC ECREG(EC_REG_BASE_ADDR + 0x1544)
|
|
#define PM5IE ECREG(EC_REG_BASE_ADDR + 0x1545)
|
|
|
|
/* PM Status Register */
|
|
#define SMIEVT BIT(6)
|
|
#define SCIEVT BIT(5)
|
|
#define BURST BIT(4)
|
|
#define P_C_D BIT(3)
|
|
#define P_IBF BIT(1)
|
|
#define P_OBF BIT(0)
|
|
|
|
/* PM Control */
|
|
#define APM BIT(7)
|
|
#define SCINP BIT(6)
|
|
#define OBEIE BIT(1)
|
|
#define IBFIE BIT(0)
|
|
|
|
/* PM Interrupt Control */
|
|
#define SMINP BIT(6)
|
|
#define SCIB BIT(2)
|
|
#define SMIB BIT(1)
|
|
#define IRQB BIT(0)
|
|
|
|
/* PM Interrupt Enable */
|
|
#define HWSMIEN BIT(5)
|
|
#define HWSCIEN BIT(4)
|
|
#define HWIRQEN BIT(3)
|
|
#define SMIEN BIT(2)
|
|
#define SCIEN BIT(1)
|
|
#define IRQEN BIT(0)
|
|
|
|
/* PM Interrupt Enable */
|
|
#define MBXEN BIT(7)
|
|
|
|
/**
|
|
*
|
|
* (16XXh) General Purpose I/O Control Register
|
|
*
|
|
*/
|
|
/* GPIO data register */
|
|
#define GCR ECREG(EC_REG_BASE_ADDR + 0x1600)
|
|
#define GFLE BIT(7)
|
|
#define WUI7EN BIT(6)
|
|
#define WUI6EN BIT(5)
|
|
#define LPCRSTEN_GPB7 BIT(2)
|
|
#define LPCRSTEN_GPD2 BIT(1)
|
|
|
|
#define GCR1 ECREG(EC_REG_BASE_ADDR + 0x16F0)
|
|
#define SPICTRL_0 BIT(4)
|
|
#define SPICTRL_1 BIT(5)
|
|
#define SSSPIBP BIT(6)
|
|
#define SPICTRL_2 BIT(7)
|
|
|
|
#define GCR2 ECREG(EC_REG_BASE_ADDR + 0x16F1)
|
|
#define CK32OE BIT(6)
|
|
#define SMB3E BIT(5)
|
|
#define PECIE BIT(4)
|
|
|
|
#define GCR3 ECREG(EC_REG_BASE_ADDR + 0x16F2)
|
|
#define GCR4 ECREG(EC_REG_BASE_ADDR + 0x16F3)
|
|
#define GCR5 ECREG(EC_REG_BASE_ADDR + 0x16F4)
|
|
#define GCR6 ECREG(EC_REG_BASE_ADDR + 0x16F5)
|
|
#define GCR7 ECREG(EC_REG_BASE_ADDR + 0x16F6)
|
|
#define GCR8 ECREG(EC_REG_BASE_ADDR + 0x16F7)
|
|
#define GCR9 ECREG(EC_REG_BASE_ADDR + 0x16F8)
|
|
#define GCR10 ECREG(EC_REG_BASE_ADDR + 0x16F9)
|
|
#define GCR11 ECREG(EC_REG_BASE_ADDR + 0x16FA)
|
|
#define GCR12 ECREG(EC_REG_BASE_ADDR + 0x16FB)
|
|
#define GCR13 ECREG(EC_REG_BASE_ADDR + 0x16FC)
|
|
#define GCR14 ECREG(EC_REG_BASE_ADDR + 0x16FD)
|
|
#define GCR15 ECREG(EC_REG_BASE_ADDR + 0x16FE)
|
|
#define GCR16 ECREG(EC_REG_BASE_ADDR + 0x16E0)
|
|
#define GCR17 ECREG(EC_REG_BASE_ADDR + 0x16E1)
|
|
#define GCR18 ECREG(EC_REG_BASE_ADDR + 0x16E2)
|
|
#define GCR19 ECREG(EC_REG_BASE_ADDR + 0x16E4)
|
|
#define GCR20 ECREG(EC_REG_BASE_ADDR + 0x16E5)
|
|
#define GCR21 ECREG(EC_REG_BASE_ADDR + 0x16E6)
|
|
|
|
/*
|
|
* TODO: use pinmux driver to enable uart function so we can remove these
|
|
* registers' declaration.
|
|
*/
|
|
/* GPIO control register */
|
|
#define GPCRB0 ECREG(EC_REG_BASE_ADDR + 0x1618)
|
|
#define GPCRB1 ECREG(EC_REG_BASE_ADDR + 0x1619)
|
|
#define GPCRD5 ECREG(EC_REG_BASE_ADDR + 0x162D)
|
|
#define GPCRE5 ECREG(EC_REG_BASE_ADDR + 0x1635)
|
|
#define GPCRF3 ECREG(EC_REG_BASE_ADDR + 0x163B)
|
|
#define GPCRF4 ECREG(EC_REG_BASE_ADDR + 0x163C)
|
|
#define GPCRF5 ECREG(EC_REG_BASE_ADDR + 0x163D)
|
|
#define GPCRH1 ECREG(EC_REG_BASE_ADDR + 0x1649)
|
|
#define GPCRH2 ECREG(EC_REG_BASE_ADDR + 0x164A)
|
|
#define GPCRI7 ECREG(EC_REG_BASE_ADDR + 0x1657)
|
|
|
|
/* Port Data Mirror Register */
|
|
#define GPDMRA ECREG(EC_REG_BASE_ADDR + 0x1661)
|
|
#define GPDMRB ECREG(EC_REG_BASE_ADDR + 0x1662)
|
|
#define GPDMRC ECREG(EC_REG_BASE_ADDR + 0x1663)
|
|
#define GPDMRD ECREG(EC_REG_BASE_ADDR + 0x1664)
|
|
#define GPDMRE ECREG(EC_REG_BASE_ADDR + 0x1665)
|
|
#define GPDMRF ECREG(EC_REG_BASE_ADDR + 0x1666)
|
|
#define GPDMRG ECREG(EC_REG_BASE_ADDR + 0x1667)
|
|
#define GPDMRH ECREG(EC_REG_BASE_ADDR + 0x1668)
|
|
#define GPDMRI ECREG(EC_REG_BASE_ADDR + 0x1669)
|
|
#define GPDMRJ ECREG(EC_REG_BASE_ADDR + 0x166A)
|
|
#define GPDMRM ECREG(EC_REG_BASE_ADDR + 0x166D)
|
|
|
|
#define GPCR_PORT_PIN_MODE_INPUT BIT(7)
|
|
#define GPCR_PORT_PIN_MODE_OUTPUT BIT(6)
|
|
#define GPCR_PORT_PIN_MODE_PULLUP BIT(2)
|
|
#define GPCR_PORT_PIN_MODE_PULLDOWN BIT(1)
|
|
|
|
/**
|
|
*
|
|
* (17XXh) PS/2 Interface Register
|
|
*
|
|
*/
|
|
#define PSCTL1 ECREG(EC_REG_BASE_ADDR + 0x1700)
|
|
#define PSCTL2 ECREG(EC_REG_BASE_ADDR + 0x1701)
|
|
#define PSCTL3 ECREG(EC_REG_BASE_ADDR + 0x1702)
|
|
#define PSINT1 ECREG(EC_REG_BASE_ADDR + 0x1704)
|
|
#define PSINT2 ECREG(EC_REG_BASE_ADDR + 0x1705)
|
|
#define PSINT3 ECREG(EC_REG_BASE_ADDR + 0x1706)
|
|
#define PSSTS1 ECREG(EC_REG_BASE_ADDR + 0x1708)
|
|
#define PSSTS2 ECREG(EC_REG_BASE_ADDR + 0x1709)
|
|
#define PSSTS3 ECREG(EC_REG_BASE_ADDR + 0x170A)
|
|
#define PSDAT1 ECREG(EC_REG_BASE_ADDR + 0x170C)
|
|
#define PSDAT2 ECREG(EC_REG_BASE_ADDR + 0x170D)
|
|
#define PSDAT3 ECREG(EC_REG_BASE_ADDR + 0x170E)
|
|
|
|
/* PS/2 Control Register */
|
|
#define DCEN BIT(4)
|
|
#define TRMS BIT(3)
|
|
#define PSHE BIT(2)
|
|
#define CCLK BIT(1)
|
|
#define CDAT BIT(0)
|
|
|
|
/* PS/2 Interrupt Control Register */
|
|
#define TDIE BIT(2)
|
|
#define SIE BIT(1)
|
|
#define SMIE BIT(0)
|
|
|
|
/* PS/2 Status Register */
|
|
#define FER BIT(5)
|
|
#define PER BIT(4)
|
|
#define TDS BIT(3)
|
|
#define SS BIT(2)
|
|
#define CLS BIT(1)
|
|
#define DLS BIT(0)
|
|
|
|
/*
|
|
* IT8XXX2 register structure size/offset checking macro function to mitigate
|
|
* the risk of unexpected compiling results.
|
|
*/
|
|
#define IT8XXX2_REG_SIZE_CHECK(reg_def, size) \
|
|
BUILD_ASSERT(sizeof(struct reg_def) == size, \
|
|
"Failed in size check of register structure!")
|
|
#define IT8XXX2_REG_OFFSET_CHECK(reg_def, member, offset) \
|
|
BUILD_ASSERT(offsetof(struct reg_def, member) == offset, \
|
|
"Failed in offset check of register structure member!")
|
|
|
|
/**
|
|
*
|
|
* (18xxh) PWM & SmartAuto Fan Control (PWM)
|
|
*
|
|
*/
|
|
#ifndef __ASSEMBLER__
|
|
struct pwm_it8xxx2_regs {
|
|
/* 0x000: Channel0 Clock Prescaler */
|
|
volatile uint8_t C0CPRS;
|
|
/* 0x001: Cycle Time0 */
|
|
volatile uint8_t CTR;
|
|
/* 0x002~0x00A: Reserved1 */
|
|
volatile uint8_t Reserved1[9];
|
|
/* 0x00B: Prescaler Clock Frequency Select */
|
|
volatile uint8_t PCFSR;
|
|
/* 0x00C~0x00F: Reserved2 */
|
|
volatile uint8_t Reserved2[4];
|
|
/* 0x010: Cycle Time1 MSB */
|
|
volatile uint8_t CTR1M;
|
|
/* 0x011~0x022: Reserved3 */
|
|
volatile uint8_t Reserved3[18];
|
|
/* 0x023: PWM Clock Control */
|
|
volatile uint8_t ZTIER;
|
|
/* 0x024~0x026: Reserved4 */
|
|
volatile uint8_t Reserved4[3];
|
|
/* 0x027: Channel4 Clock Prescaler */
|
|
volatile uint8_t C4CPRS;
|
|
/* 0x028: Channel4 Clock Prescaler MSB */
|
|
volatile uint8_t C4MCPRS;
|
|
/* 0x029~0x02A: Reserved5 */
|
|
volatile uint8_t Reserved5[2];
|
|
/* 0x02B: Channel6 Clock Prescaler */
|
|
volatile uint8_t C6CPRS;
|
|
/* 0x02C: Channel6 Clock Prescaler MSB */
|
|
volatile uint8_t C6MCPRS;
|
|
/* 0x02D: Channel7 Clock Prescaler */
|
|
volatile uint8_t C7CPRS;
|
|
/* 0x02E: Channel7 Clock Prescaler MSB */
|
|
volatile uint8_t C7MCPRS;
|
|
/* 0x02F~0x040: Reserved6 */
|
|
volatile uint8_t reserved6[18];
|
|
/* 0x041: Cycle Time1 */
|
|
volatile uint8_t CTR1;
|
|
/* 0x042: Cycle Time2 */
|
|
volatile uint8_t CTR2;
|
|
/* 0x043: Cycle Time3 */
|
|
volatile uint8_t CTR3;
|
|
};
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
/* PWM register fields */
|
|
/* 0x023: PWM Clock Control */
|
|
#define IT8XXX2_PWM_PCCE BIT(1)
|
|
|
|
/**
|
|
*
|
|
* (19xxh) Analog to Digital converter (ADC)
|
|
*
|
|
*/
|
|
#define ADCECR ECREG(EC_REG_BASE_ADDR + 0x1901)
|
|
#define ADCCSR ECREG(EC_REG_BASE_ADDR + 0x1902)
|
|
#define ADCGC0R ECREG(EC_REG_BASE_ADDR + 0x1903)
|
|
#define ADCGC1R ECREG(EC_REG_BASE_ADDR + 0x1904)
|
|
#define ADCCXC_BASE (EC_REG_BASE_ADDR + 0x1905)
|
|
#define ADCCXC0R(ch) ECREG(ADCCxC_BASE + ((ch) * 2))
|
|
#define ADCCXC1R(ch) ECREG(ADCCxC_BASE + 1 + ((ch) * 2))
|
|
#define ADCDMALBAR ECREG(EC_REG_BASE_ADDR + 0x190D)
|
|
#define ADCDMAHBAR ECREG(EC_REG_BASE_ADDR + 0x190E)
|
|
#define ADCDMABLR ECREG(EC_REG_BASE_ADDR + 0x190F)
|
|
#define ADCDLR ECREG(EC_REG_BASE_ADDR + 0x1910)
|
|
#define ADCIMR ECREG(EC_REG_BASE_ADDR + 0x1911)
|
|
#define ADCISR ECREG(EC_REG_BASE_ADDR + 0x1912)
|
|
#define ADCCxS_BASE (EC_REG_BASE_ADDR + 0x1950)
|
|
#define ADCCXD0R(ch) ECREG(ADCCxS_BASE0 + ((ch) * 2))
|
|
#define ADCCXD1R(ch) ECREG(ADCCxS_BASE + 1 + ((ch) * 2))
|
|
|
|
/* ADC Status Register */
|
|
#define FIRHIACC BIT(7)
|
|
#define AINITB BIT(3)
|
|
#define ADCPS BIT(2)
|
|
#define DOVE BIT(1)
|
|
#define EOCE BIT(0)
|
|
|
|
/* ADC Configuration Register */
|
|
#define DFILEN BIT(5)
|
|
#define INTECEN BIT(2)
|
|
#define ADCEN BIT(0)
|
|
|
|
/* Voltage Channel Control Register */
|
|
#define DATVAL BIT(7)
|
|
#define INTDVEN BIT(5)
|
|
|
|
/* Calibration Data Control Register */
|
|
#define AHCE BIT(7)
|
|
#define HCDATVAL BIT(5)
|
|
#define GCDATVAL BIT(4)
|
|
#define VHSCKE BIT(1)
|
|
#define GECKE BIT(0)
|
|
|
|
/**
|
|
*
|
|
* (1Axxh) Real Time Clock (RTC)
|
|
*
|
|
*/
|
|
#define SECREG ECREG(EC_REG_BASE_ADDR + 0x1A00)
|
|
#define SECA1REG ECREG(EC_REG_BASE_ADDR + 0x1A01)
|
|
#define MINREG ECREG(EC_REG_BASE_ADDR + 0x1A02)
|
|
#define MINA1REG ECREG(EC_REG_BASE_ADDR + 0x1A03)
|
|
#define HRREG ECREG(EC_REG_BASE_ADDR + 0x1A04)
|
|
#define HRA1REG ECREG(EC_REG_BASE_ADDR + 0x1A05)
|
|
#define DOWREG ECREG(EC_REG_BASE_ADDR + 0x1A06)
|
|
#define DOMREG ECREG(EC_REG_BASE_ADDR + 0x1A07)
|
|
#define MONREG ECREG(EC_REG_BASE_ADDR + 0x1A08)
|
|
#define YRREG ECREG(EC_REG_BASE_ADDR + 0x1A09)
|
|
#define CTLREGA ECREG(EC_REG_BASE_ADDR + 0x1A0A)
|
|
#define CTLREGB ECREG(EC_REG_BASE_ADDR + 0x1A0B)
|
|
#define CTLREGC ECREG(EC_REG_BASE_ADDR + 0x1A0C)
|
|
#define DOMA1REG ECREG(EC_REG_BASE_ADDR + 0x1A0D)
|
|
#define MONA1REG ECREG(EC_REG_BASE_ADDR + 0x1A0E)
|
|
#define SECA2REG ECREG(EC_REG_BASE_ADDR + 0x1A0F)
|
|
#define MINA2REG ECREG(EC_REG_BASE_ADDR + 0x1A10)
|
|
#define HRA2REG ECREG(EC_REG_BASE_ADDR + 0x1A11)
|
|
#define DOMA2REG ECREG(EC_REG_BASE_ADDR + 0x1A12)
|
|
#define MONA2REG ECREG(EC_REG_BASE_ADDR + 0x1A13)
|
|
#define PORSREGA ECREG(EC_REG_BASE_ADDR + 0x1A14)
|
|
#define PORSREGB ECREG(EC_REG_BASE_ADDR + 0x1A15)
|
|
|
|
/* --- Wake-Up Control (WUC) --- */
|
|
#define IT8XXX2_WUC_BASE 0x00F01B00
|
|
|
|
/* TODO: should a defined interface for configuring wake-up interrupts */
|
|
#define IT8XXX2_WUC_WUEMR1 (IT8XXX2_WUC_BASE + 0x00)
|
|
#define IT8XXX2_WUC_WUEMR3 (IT8XXX2_WUC_BASE + 0x02)
|
|
#define IT8XXX2_WUC_WUEMR5 (IT8XXX2_WUC_BASE + 0x0c)
|
|
#define IT8XXX2_WUC_WUESR1 (IT8XXX2_WUC_BASE + 0x04)
|
|
#define IT8XXX2_WUC_WUESR3 (IT8XXX2_WUC_BASE + 0x06)
|
|
#define IT8XXX2_WUC_WUESR5 (IT8XXX2_WUC_BASE + 0x0d)
|
|
#define IT8XXX2_WUC_WUENR3 (IT8XXX2_WUC_BASE + 0x0a)
|
|
#define IT8XXX2_WUC_WUBEMR1 (IT8XXX2_WUC_BASE + 0x3c)
|
|
#define IT8XXX2_WUC_WUBEMR5 (IT8XXX2_WUC_BASE + 0x0f)
|
|
|
|
/**
|
|
*
|
|
* (1Cxxh) SMBus Interface (SMB)
|
|
*
|
|
*/
|
|
#define HOSTA_A ECREG(EC_REG_BASE_ADDR + 0x1C40)
|
|
#define HOSTA_B ECREG(EC_REG_BASE_ADDR + 0x1C80)
|
|
#define HOSTA_C ECREG(EC_REG_BASE_ADDR + 0x1CC0)
|
|
#define HOSTA_BDS BIT(7)
|
|
#define HOSTA_TMOE BIT(6)
|
|
#define HOSTA_NACK BIT(5)
|
|
#define HOSTA_FAIL BIT(4)
|
|
#define HOSTA_BSER BIT(3)
|
|
#define HOSTA_DVER BIT(2)
|
|
#define HOSTA_FINTR BIT(1)
|
|
#define HOSTA_HOBY BIT(0)
|
|
#define HOSTA_ANY_ERROR (HOSTA_DVER | HOSTA_BSER | \
|
|
HOSTA_FAIL | HOSTA_NACK | HOSTA_TMOE)
|
|
#define HOSTA_NEXT_BYTE HOSTA_BDS
|
|
#define HOSTA_ALL_WC_BIT (HOSTA_FINTR | \
|
|
HOSTA_ANY_ERROR | HOSTA_BDS)
|
|
|
|
#define HOCTL_A ECREG(EC_REG_BASE_ADDR + 0x1C41)
|
|
#define HOCTL_B ECREG(EC_REG_BASE_ADDR + 0x1C81)
|
|
#define HOCTL_C ECREG(EC_REG_BASE_ADDR + 0x1CC1)
|
|
#define HOCTL_PEC_EN BIT(7)
|
|
#define HOCTL_SRT BIT(6)
|
|
#define HOCTL_LABY BIT(5)
|
|
#define HOCTL_SMCD2 BIT(4)
|
|
#define HOCTL_SMCD1 BIT(3)
|
|
#define HOCTL_SMCD0 BIT(2)
|
|
#define HOCTL_KILL BIT(1)
|
|
#define HOCTL_INTREN BIT(0)
|
|
|
|
#define HOCMD_A ECREG(EC_REG_BASE_ADDR + 0x1C42)
|
|
#define HOCMD_B ECREG(EC_REG_BASE_ADDR + 0x1C82)
|
|
#define HOCMD_C ECREG(EC_REG_BASE_ADDR + 0x1CC2)
|
|
#define TRASLA_A ECREG(EC_REG_BASE_ADDR + 0x1C43)
|
|
#define TRASLA_B ECREG(EC_REG_BASE_ADDR + 0x1C83)
|
|
#define TRASLA_C ECREG(EC_REG_BASE_ADDR + 0x1CC3)
|
|
#define D0REG_A ECREG(EC_REG_BASE_ADDR + 0x1C44)
|
|
#define D0REG_B ECREG(EC_REG_BASE_ADDR + 0x1C84)
|
|
#define D0REG_C ECREG(EC_REG_BASE_ADDR + 0x1CC4)
|
|
#define D1REG_A ECREG(EC_REG_BASE_ADDR + 0x1C45)
|
|
#define D1REG_B ECREG(EC_REG_BASE_ADDR + 0x1C85)
|
|
#define D1REG_C ECREG(EC_REG_BASE_ADDR + 0x1CC5)
|
|
#define HOBDB_A ECREG(EC_REG_BASE_ADDR + 0x1C46)
|
|
#define HOBDB_B ECREG(EC_REG_BASE_ADDR + 0x1C86)
|
|
#define HOBDB_C ECREG(EC_REG_BASE_ADDR + 0x1CC6)
|
|
#define PECERC_A ECREG(EC_REG_BASE_ADDR + 0x1C47)
|
|
#define PECERC_B ECREG(EC_REG_BASE_ADDR + 0x1C87)
|
|
#define PECERC_C ECREG(EC_REG_BASE_ADDR + 0x1CC7)
|
|
#define RESLADR_A ECREG(EC_REG_BASE_ADDR + 0x1C48)
|
|
#define RESLADR_B ECREG(EC_REG_BASE_ADDR + 0x1C88)
|
|
#define RESLADR_2_A ECREG(EC_REG_BASE_ADDR + 0x1C51)
|
|
#define RESLADR_2_B ECREG(EC_REG_BASE_ADDR + 0x1C91)
|
|
#define SLDA_A ECREG(EC_REG_BASE_ADDR + 0x1C49)
|
|
#define SLDA_B ECREG(EC_REG_BASE_ADDR + 0x1C89)
|
|
#define SMBPCTL_A ECREG(EC_REG_BASE_ADDR + 0x1C4A)
|
|
#define SMBPCTL_B ECREG(EC_REG_BASE_ADDR + 0x1C8A)
|
|
#define SMBPCTL_C ECREG(EC_REG_BASE_ADDR + 0x1CCA)
|
|
#define SLSTA_A ECREG(EC_REG_BASE_ADDR + 0x1C4B)
|
|
#define SLSTA_B ECREG(EC_REG_BASE_ADDR + 0x1C8B)
|
|
#define INT81 BIT(7)
|
|
#define BIS BIT(6)
|
|
#define SPDS BIT(5)
|
|
#define MSLA2 BIT(4)
|
|
#define RCS BIT(3)
|
|
#define STS BIT(2)
|
|
#define SDS BIT(1)
|
|
#define HONOST BIT(0)
|
|
|
|
#define SICR_A ECREG(EC_REG_BASE_ADDR + 0x1C4C)
|
|
#define SICR_B ECREG(EC_REG_BASE_ADDR + 0x1C8C)
|
|
#define NDADR_A ECREG(EC_REG_BASE_ADDR + 0x1C4D)
|
|
#define NDADR_B ECREG(EC_REG_BASE_ADDR + 0x1C8D)
|
|
#define NDLB_A ECREG(EC_REG_BASE_ADDR + 0x1C4E)
|
|
#define NDLB_B ECREG(EC_REG_BASE_ADDR + 0x1C8E)
|
|
#define NDHB_A ECREG(EC_REG_BASE_ADDR + 0x1C4F)
|
|
#define NDHB_B ECREG(EC_REG_BASE_ADDR + 0x1C8F)
|
|
#define HOCTL2_A ECREG(EC_REG_BASE_ADDR + 0x1C50)
|
|
#define HOCTL2_B ECREG(EC_REG_BASE_ADDR + 0x1C90)
|
|
#define HOCTL2_C ECREG(EC_REG_BASE_ADDR + 0x1CD0)
|
|
#define SMB4P7USL ECREG(EC_REG_BASE_ADDR + 0x1C00)
|
|
#define SMB4P0USH ECREG(EC_REG_BASE_ADDR + 0x1C01)
|
|
#define SMB300NS ECREG(EC_REG_BASE_ADDR + 0x1C02)
|
|
#define SMB250NS ECREG(EC_REG_BASE_ADDR + 0x1C03)
|
|
#define SMB25MS ECREG(EC_REG_BASE_ADDR + 0x1C04)
|
|
#define SMB45P3USL ECREG(EC_REG_BASE_ADDR + 0x1C05)
|
|
#define SMB45P3USH ECREG(EC_REG_BASE_ADDR + 0x1C06)
|
|
#define SMB4P7A4P0H ECREG(EC_REG_BASE_ADDR + 0x1C07)
|
|
#define SLVISEL ECREG(EC_REG_BASE_ADDR + 0x1C08)
|
|
#define SCLKTS_A ECREG(EC_REG_BASE_ADDR + 0x1C09)
|
|
#define SCLKTS_B ECREG(EC_REG_BASE_ADDR + 0x1C0A)
|
|
#define SCLKTS_C ECREG(EC_REG_BASE_ADDR + 0x1C0B)
|
|
#define SMBFFCTRL1 ECREG(EC_REG_BASE_ADDR + 0x1C0D)
|
|
#define SMBFFSTS1 ECREG(EC_REG_BASE_ADDR + 0x1C0E)
|
|
#define SMBFFCTRL2 ECREG(EC_REG_BASE_ADDR + 0x1C0F)
|
|
#define SMBFFSTS2 ECREG(EC_REG_BASE_ADDR + 0x1C10)
|
|
#define CHSEF ECREG(EC_REG_BASE_ADDR + 0x1C11)
|
|
#define HOCTL3_A ECREG(EC_REG_BASE_ADDR + 0x1C52)
|
|
#define HOCTL3_B ECREG(EC_REG_BASE_ADDR + 0x1C92)
|
|
#define HOCTL3_C ECREG(EC_REG_BASE_ADDR + 0x1CD2)
|
|
#define MCODE_A ECREG(EC_REG_BASE_ADDR + 0x1C53)
|
|
#define MCODE_B ECREG(EC_REG_BASE_ADDR + 0x1C93)
|
|
#define MCODE_C ECREG(EC_REG_BASE_ADDR + 0x1CD3)
|
|
|
|
/**
|
|
*
|
|
* (1Dxxh) Keyboard Matrix Scan control (KBS)
|
|
*
|
|
*/
|
|
#define KSOL ECREG(EC_REG_BASE_ADDR + 0x1D00)
|
|
#define KSOH1 ECREG(EC_REG_BASE_ADDR + 0x1D01)
|
|
#define KSOCTRL ECREG(EC_REG_BASE_ADDR + 0x1D02)
|
|
#define KSOH2 ECREG(EC_REG_BASE_ADDR + 0x1D03)
|
|
#define KSI ECREG(EC_REG_BASE_ADDR + 0x1D04)
|
|
#define KSICTRL ECREG(EC_REG_BASE_ADDR + 0x1D05)
|
|
#define KSIGCTRL ECREG(EC_REG_BASE_ADDR + 0x1D06)
|
|
#define KSIGOEN ECREG(EC_REG_BASE_ADDR + 0x1D07)
|
|
#define KSIGDAT ECREG(EC_REG_BASE_ADDR + 0x1D08)
|
|
#define KSIGDMRR ECREG(EC_REG_BASE_ADDR + 0x1D09)
|
|
#define KSOHGCTRL ECREG(EC_REG_BASE_ADDR + 0x1D0A)
|
|
#define KSOHGOEN ECREG(EC_REG_BASE_ADDR + 0x1D0B)
|
|
#define KSOHGDMRR ECREG(EC_REG_BASE_ADDR + 0x1D0C)
|
|
#define KSOLGCTRL ECREG(EC_REG_BASE_ADDR + 0x1D0D)
|
|
#define KSOLGOEN ECREG(EC_REG_BASE_ADDR + 0x1D0E)
|
|
#define KSOLGDMRR ECREG(EC_REG_BASE_ADDR + 0x1D0F)
|
|
#define KSO0LSDR ECREG(EC_REG_BASE_ADDR + 0x1D10)
|
|
#define KSO1LSDR ECREG(EC_REG_BASE_ADDR + 0x1D11)
|
|
#define KSO2LSDR ECREG(EC_REG_BASE_ADDR + 0x1D12)
|
|
#define KSO3LSDR ECREG(EC_REG_BASE_ADDR + 0x1D13)
|
|
#define KSO4LSDR ECREG(EC_REG_BASE_ADDR + 0x1D14)
|
|
#define KSO5LSDR ECREG(EC_REG_BASE_ADDR + 0x1D15)
|
|
#define KSO6LSDR ECREG(EC_REG_BASE_ADDR + 0x1D16)
|
|
#define KSO7LSDR ECREG(EC_REG_BASE_ADDR + 0x1D17)
|
|
#define KSO8LSDR ECREG(EC_REG_BASE_ADDR + 0x1D18)
|
|
#define KSO9LSDR ECREG(EC_REG_BASE_ADDR + 0x1D19)
|
|
#define KSO10LSDR ECREG(EC_REG_BASE_ADDR + 0x1D1A)
|
|
#define KSO11LSDR ECREG(EC_REG_BASE_ADDR + 0x1D1B)
|
|
#define KSO12LSDR ECREG(EC_REG_BASE_ADDR + 0x1D1C)
|
|
#define KSO13LSDR ECREG(EC_REG_BASE_ADDR + 0x1D1D)
|
|
#define KSO14LSDR ECREG(EC_REG_BASE_ADDR + 0x1D1E)
|
|
#define KSO15LSDR ECREG(EC_REG_BASE_ADDR + 0x1D1F)
|
|
#define KSO16LSDR ECREG(EC_REG_BASE_ADDR + 0x1D20)
|
|
#define KSO17LSDR ECREG(EC_REG_BASE_ADDR + 0x1D21)
|
|
#define SDC1R ECREG(EC_REG_BASE_ADDR + 0x1D22)
|
|
#define SDEN BIT(7)
|
|
#define INTSDVEN BIT(5)
|
|
|
|
/* BIT2 ~ BIT0 Scan loop select */
|
|
#define SLS_00_ROUND 0x00
|
|
#define SLS_02_ROUND 0x01
|
|
#define SLS_03_ROUND 0x02
|
|
#define SLS_04_ROUND 0x03
|
|
#define SLS_05_ROUND 0x04
|
|
#define SLS_06_ROUND 0x05
|
|
#define SLS_07_ROUND 0x06
|
|
#define SLS_08_ROUND 0x07
|
|
|
|
#define SDC2R ECREG(EC_REG_BASE_ADDR + 0x1D23)
|
|
#define KSOPCS1 BIT(7)
|
|
#define KSOPCS0 BIT(6)
|
|
|
|
/* BIT3 ~ BIT0 Wait KSO high delay */
|
|
#define WKSOHDLY_23US 0x00
|
|
#define WKSOHDLY_31US 0x01
|
|
#define WKSOHDLY_39US 0x02
|
|
#define WKSOHDLY_47US 0x03
|
|
#define WKSOHDLY_55US 0x04
|
|
#define WKSOHDLY_63US 0x05
|
|
#define WKSOHDLY_71US 0x06
|
|
#define WKSOHDLY_79US 0x07
|
|
#define WKSOHDLY_87US 0x08
|
|
#define WKSOHDLY_95US 0x09
|
|
|
|
#define SDC3R ECREG(EC_REG_BASE_ADDR + 0x1D24)
|
|
|
|
/* BIT7 ~ BIT4 Wait KSO low delay */
|
|
#define WKSOLDLY_11US (0x00 << 4)
|
|
#define WKSOLDLY_13US (0x01 << 4)
|
|
#define WKSOLDLY_15US (0x02 << 4)
|
|
#define WKSOLDLY_17US (0x03 << 4)
|
|
#define WKSOLDLY_19US (0x04 << 4)
|
|
#define WKSOLDLY_21US (0x05 << 4)
|
|
#define WKSOLDLY_23US (0x06 << 4)
|
|
#define WKSOLDLY_25US (0x07 << 4)
|
|
#define WKSOLDLY_27US (0x08 << 4)
|
|
#define WKSOLDLY_29US (0x09 << 4)
|
|
|
|
/* BIT3 ~ BIT0 Spacing delay between rounds */
|
|
#define SDLYBR_00MS 0x00
|
|
#define SDLYBR_01MS 0x01
|
|
#define SDLYBR_02MS 0x02
|
|
#define SDLYBR_03MS 0x03
|
|
#define SDLYBR_04MS 0x04
|
|
#define SDLYBR_05MS 0x05
|
|
#define SDLYBR_06MS 0x06
|
|
#define SDLYBR_07MS 0x07
|
|
#define SDLYBR_08MS 0x08
|
|
#define SDLYBR_09MS 0x09
|
|
#define SDLYBR_10MS 0x0A
|
|
#define SDLYBR_11MS 0x0B
|
|
#define SDLYBR_12MS 0x0C
|
|
#define SDLYBR_13MS 0x0D
|
|
#define SDLYBR_14MS 0x0E
|
|
#define SDLYBR_15MS 0x0F
|
|
|
|
#define SDSR ECREG(EC_REG_BASE_ADDR + 0x1D25)
|
|
#define SDV BIT(0)
|
|
|
|
/* Keyboard Scan Out Control Register */
|
|
#define KSOPU BIT(2)
|
|
#define KSOOD BIT(0)
|
|
|
|
/* Keyboard Scan In Control Register */
|
|
#define KSIPU BIT(2)
|
|
|
|
/**
|
|
*
|
|
* (1Exxh) EC Clock and Power Management controller (ECPM)
|
|
*
|
|
*/
|
|
#define CGCTRL1R ECREG(EC_REG_BASE_ADDR + 0x1E01)
|
|
#define CGCTRL2R ECREG(EC_REG_BASE_ADDR + 0x1E02)
|
|
#define CGCTRL3R ECREG(EC_REG_BASE_ADDR + 0x1E05)
|
|
#define PLLCTRL ECREG(EC_REG_BASE_ADDR + 0x1E03)
|
|
#define AUTOCG ECREG(EC_REG_BASE_ADDR + 0x1E04)
|
|
#define PLLFREQR ECREG(EC_REG_BASE_ADDR + 0x1E06)
|
|
#define PLLSSCR ECREG(EC_REG_BASE_ADDR + 0x1E07)
|
|
#define PLLCSS ECREG(EC_REG_BASE_ADDR + 0x1E08)
|
|
#define CGCTRL4R ECREG(EC_REG_BASE_ADDR + 0x1E09)
|
|
#define EC_1E00 ECREG(EC_REG_BASE_ADDR + 0x1E00)
|
|
#define ECPM_PDCTRL1R ECREG(EC_REG_BASE_ADDR + 0x1E01)
|
|
#define EC_1E03 ECREG(EC_REG_BASE_ADDR + 0x1E03)
|
|
#define EC_1E06 ECREG(EC_REG_BASE_ADDR + 0x1E06)
|
|
#define LDOCTR ECREG(EC_REG_BASE_ADDR + 0x1E0A)
|
|
#define PLLSTCR ECREG(EC_REG_BASE_ADDR + 0x1E0B)
|
|
#define SCDCR0 ECREG(EC_REG_BASE_ADDR + 0x1E0C)
|
|
#define SCDCR1 ECREG(EC_REG_BASE_ADDR + 0x1E0D)
|
|
#define SCDCR2 ECREG(EC_REG_BASE_ADDR + 0x1E0E)
|
|
#define SCDCR3 ECREG(EC_REG_BASE_ADDR + 0x1E0F)
|
|
#define CGCTRL5R ECREG(EC_REG_BASE_ADDR + 0x1E13)
|
|
#define LOWFREQ ECREG(EC_REG_BASE_ADDR + 0x1E19)
|
|
|
|
/**
|
|
*
|
|
* (1Fxxh) External Timer & External Watchdog (ETWD)
|
|
*
|
|
*/
|
|
#ifndef __ASSEMBLER__
|
|
struct wdt_it8xxx2_regs {
|
|
/* 0x000: Reserved1 */
|
|
volatile uint8_t reserved1;
|
|
/* 0x001: External Timer1/WDT Configuration */
|
|
volatile uint8_t ETWCFG;
|
|
/* 0x002: External Timer1 Prescaler */
|
|
volatile uint8_t ET1PSR;
|
|
/* 0x003: External Timer1 Counter High Byte */
|
|
volatile uint8_t ET1CNTLHR;
|
|
/* 0x004: External Timer1 Counter Low Byte */
|
|
volatile uint8_t ET1CNTLLR;
|
|
/* 0x005: External Timer1/WDT Control */
|
|
volatile uint8_t ETWCTRL;
|
|
/* 0x006: External WDT Counter Low Byte */
|
|
volatile uint8_t EWDCNTLR;
|
|
/* 0x007: External WDT Key */
|
|
volatile uint8_t EWDKEYR;
|
|
/* 0x008: Reserved2 */
|
|
volatile uint8_t reserved2;
|
|
/* 0x009: External WDT Counter High Byte */
|
|
volatile uint8_t EWDCNTHR;
|
|
/* 0x00A: External Timer2 Prescaler */
|
|
volatile uint8_t ET2PSR;
|
|
/* 0x00B: External Timer2 Counter High Byte */
|
|
volatile uint8_t ET2CNTLHR;
|
|
/* 0x00C: External Timer2 Counter Low Byte */
|
|
volatile uint8_t ET2CNTLLR;
|
|
/* 0x00D: Reserved3 */
|
|
volatile uint8_t reserved3;
|
|
/* 0x00E: External Timer2 Counter High Byte2 */
|
|
volatile uint8_t ET2CNTLH2R;
|
|
/* 0x00F~0x03F: Reserved4 */
|
|
volatile uint8_t reserved4[49];
|
|
/* 0x040: External Timer1 Counter Observation Low Byte */
|
|
volatile uint8_t ET1CNTOLR;
|
|
/* 0x041: External Timer1 Counter Observation High Byte */
|
|
volatile uint8_t ET1CNTOHR;
|
|
/* 0x042~0x043: Reserved5 */
|
|
volatile uint8_t reserved5[2];
|
|
/* 0x044: External Timer1 Counter Observation Low Byte */
|
|
volatile uint8_t ET2CNTOLR;
|
|
/* 0x045: External Timer1 Counter Observation High Byte */
|
|
volatile uint8_t ET2CNTOHR;
|
|
/* 0x046: External Timer1 Counter Observation High Byte2 */
|
|
volatile uint8_t ET2CNTOH2R;
|
|
/* 0x047~0x05F: Reserved6 */
|
|
volatile uint8_t reserved6[25];
|
|
/* 0x060: External WDT Counter Observation Low Byte */
|
|
volatile uint8_t EWDCNTOLR;
|
|
/* 0x061: External WDT Counter Observation High Byte */
|
|
volatile uint8_t EWDCNTOHR;
|
|
};
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
/* WDT register fields */
|
|
/* 0x001: External Timer1/WDT Configuration */
|
|
#define IT8XXX2_WDT_EWDKEYEN BIT(5)
|
|
#define IT8XXX2_WDT_EWDSRC BIT(4)
|
|
#define IT8XXX2_WDT_LEWDCNTL BIT(3)
|
|
#define IT8XXX2_WDT_LET1CNTL BIT(2)
|
|
#define IT8XXX2_WDT_LET1PS BIT(1)
|
|
#define IT8XXX2_WDT_LETWCFG BIT(0)
|
|
/* 0x002: External Timer1 Prescaler */
|
|
#define IT8XXX2_WDT_ETPS_32P768_KHZ 0x00
|
|
#define IT8XXX2_WDT_ETPS_1P024_KHZ 0x01
|
|
#define IT8XXX2_WDT_ETPS_32_HZ 0x02
|
|
/* 0x005: External Timer1/WDT Control */
|
|
#define IT8XXX2_WDT_EWDSCEN BIT(5)
|
|
#define IT8XXX2_WDT_EWDSCMS BIT(4)
|
|
#define IT8XXX2_WDT_ET2TC BIT(3)
|
|
#define IT8XXX2_WDT_ET2RST BIT(2)
|
|
#define IT8XXX2_WDT_ET1TC BIT(1)
|
|
#define IT8XXX2_WDT_ET1RST BIT(0)
|
|
|
|
/* External Timer register fields */
|
|
/* External Timer 3~8 control */
|
|
#define IT8XXX2_EXT_ETXRST BIT(1)
|
|
#define IT8XXX2_EXT_ETXEN BIT(0)
|
|
|
|
/* Control external timer3~8 */
|
|
#define IT8XXX2_EXT_TIMER_BASE DT_REG_ADDR(DT_NODELABEL(timer)) /*0x00F01F10*/
|
|
#define IT8XXX2_EXT_CTRLX(n) ECREG(IT8XXX2_EXT_TIMER_BASE + (n << 3))
|
|
#define IT8XXX2_EXT_PSRX(n) ECREG(IT8XXX2_EXT_TIMER_BASE + 0x01 + (n << 3))
|
|
#define IT8XXX2_EXT_CNTX(n) ECREG_u32(IT8XXX2_EXT_TIMER_BASE + 0x04 + \
|
|
(n << 3))
|
|
#define IT8XXX2_EXT_CNTOX(n) ECREG_u32(IT8XXX2_EXT_TIMER_BASE + 0x38 + \
|
|
(n << 2))
|
|
|
|
/* Free run timer configurations */
|
|
#define FREE_RUN_TIMER EXT_TIMER_4
|
|
#define FREE_RUN_TIMER_IRQ DT_IRQ_BY_IDX(DT_NODELABEL(timer), 1, irq)
|
|
/* Free run timer configurations */
|
|
#define FREE_RUN_TIMER_FLAG DT_IRQ_BY_IDX(DT_NODELABEL(timer), 1, flags)
|
|
/* Free run timer max count is 36.4 hr (base on clock source 32768Hz) */
|
|
#define FREE_RUN_TIMER_MAX_CNT 0xFFFFFFFFUL
|
|
|
|
#ifndef __ASSEMBLER__
|
|
enum ext_clk_src_sel {
|
|
EXT_PSR_32P768K = 0,
|
|
EXT_PSR_1P024K,
|
|
EXT_PSR_32,
|
|
EXT_PSR_8M,
|
|
};
|
|
/*
|
|
* 24-bit timers: external timer 3, 5, and 7
|
|
* 32-bit timers: external timer 4, 6, and 8
|
|
*/
|
|
enum ext_timer_idx {
|
|
EXT_TIMER_3 = 0, /* Event timer */
|
|
EXT_TIMER_4, /* Free run timer */
|
|
EXT_TIMER_5,
|
|
EXT_TIMER_6,
|
|
EXT_TIMER_7,
|
|
EXT_TIMER_8,
|
|
};
|
|
#endif
|
|
|
|
/**
|
|
*
|
|
* Observation external timer
|
|
*
|
|
*/
|
|
#define ET3CNTOLR ECREG(EC_REG_BASE_ADDR + 0x1F48)
|
|
#define ET3CNTOHR ECREG(EC_REG_BASE_ADDR + 0x1F49)
|
|
#define ET3CNTOH2R ECREG(EC_REG_BASE_ADDR + 0x1F4A)
|
|
#define ET4CNTOLR ECREG(EC_REG_BASE_ADDR + 0x1F4C)
|
|
#define ET4CNTOHR ECREG(EC_REG_BASE_ADDR + 0x1F4D)
|
|
#define ET4CNTOH2R ECREG(EC_REG_BASE_ADDR + 0x1F4E)
|
|
#define ET4CNTOH3R ECREG(EC_REG_BASE_ADDR + 0x1F4F)
|
|
#define ET5CNTOLR ECREG(EC_REG_BASE_ADDR + 0x1F50)
|
|
#define ET5CNTOHR ECREG(EC_REG_BASE_ADDR + 0x1F51)
|
|
#define ET5CNTOH2R ECREG(EC_REG_BASE_ADDR + 0x1F52)
|
|
#define ET6CNTOLR ECREG(EC_REG_BASE_ADDR + 0x1F54)
|
|
#define ET6CNTOHR ECREG(EC_REG_BASE_ADDR + 0x1F55)
|
|
#define ET6CNTOH2R ECREG(EC_REG_BASE_ADDR + 0x1F56)
|
|
#define ET6CNTOH3R ECREG(EC_REG_BASE_ADDR + 0x1F57)
|
|
#define ET7CNTOLR ECREG(EC_REG_BASE_ADDR + 0x1F58)
|
|
#define ET7CNTOHR ECREG(EC_REG_BASE_ADDR + 0x1F59)
|
|
#define ET7CNTOH2R ECREG(EC_REG_BASE_ADDR + 0x1F5A)
|
|
#define ET8CNTOLR ECREG(EC_REG_BASE_ADDR + 0x1F5C)
|
|
#define ET8CNTOHR ECREG(EC_REG_BASE_ADDR + 0x1F5D)
|
|
#define ET8CNTOH2R ECREG(EC_REG_BASE_ADDR + 0x1F5E)
|
|
#define ET8CNTOH3R ECREG(EC_REG_BASE_ADDR + 0x1F5F)
|
|
|
|
#define ETXCNTOR(x) (ECREG_u32(EC_REG_BASE_ADDR\
|
|
+ 0x1F40 + (x - 1) * 4))
|
|
|
|
#define ETPS_32_768_KHZ 0x00
|
|
#define ETPS_1_024_KHZ 0x01
|
|
#define ETPS_32_HZ 0x02
|
|
#define ETPS_8_MHZ 0x03
|
|
#define ET_3_8_TC BIT(2)
|
|
#define ET_3_8_RST BIT(1)
|
|
#define ET_3_8_EN BIT(0)
|
|
|
|
/**
|
|
*
|
|
* (20xxh) General Control (GCTRL)
|
|
*
|
|
*/
|
|
#define ECHIPID1 ECREG(EC_REG_BASE_ADDR + 0x2000)
|
|
#define ECHIPID2 ECREG(EC_REG_BASE_ADDR + 0x2001)
|
|
#define ECHIPVER ECREG(EC_REG_BASE_ADDR + 0x2002)
|
|
#define IDR ECREG(EC_REG_BASE_ADDR + 0x2004)
|
|
#define RSTS ECREG(EC_REG_BASE_ADDR + 0x2006)
|
|
#define RSTC1 ECREG(EC_REG_BASE_ADDR + 0x2007)
|
|
#define RSMFI BIT(7)
|
|
#define RINTC BIT(6)
|
|
#define REC2I BIT(5)
|
|
#define RKBC BIT(4)
|
|
#define RSWUC BIT(3)
|
|
#define RPMC BIT(2)
|
|
#define RGPIO BIT(1)
|
|
#define RPWM BIT(0)
|
|
#define RSTC2 ECREG(EC_REG_BASE_ADDR + 0x2008)
|
|
#define RADC BIT(7)
|
|
#define RDAC BIT(6)
|
|
#define RWUC BIT(5)
|
|
#define RKBS BIT(4)
|
|
#define REGPC BIT(2)
|
|
#define RCIR BIT(1)
|
|
#define RSTC3 ECREG(EC_REG_BASE_ADDR + 0x2009)
|
|
#define RPS23 BIT(6)
|
|
#define RPS22 BIT(5)
|
|
#define RPS21 BIT(4)
|
|
#define RSMBD BIT(3)
|
|
#define RSMBC BIT(2)
|
|
#define RSMBB BIT(1)
|
|
#define RSMBA BIT(0)
|
|
/*the same time and writing 0111b is reserved.*/
|
|
#define RSTC4 ECREG(EC_REG_BASE_ADDR + 0x2011)
|
|
#define RPECI BIT(4)
|
|
#define RTMR BIT(3)
|
|
#define RUART2 BIT(2)
|
|
#define RUART1 BIT(1)
|
|
#define RSPI BIT(0)
|
|
|
|
#define BADRSEL ECREG(EC_REG_BASE_ADDR + 0x200A)
|
|
#define WNCKR ECREG(EC_REG_BASE_ADDR + 0x200B)
|
|
#define OSCTRL ECREG(EC_REG_BASE_ADDR + 0x200C)
|
|
#define SPCTRL1 ECREG(EC_REG_BASE_ADDR + 0x200D)
|
|
#define RSTCH ECREG(EC_REG_BASE_ADDR + 0x200E)
|
|
#define GENIRQ ECREG(EC_REG_BASE_ADDR + 0x200F)
|
|
#define RSTDMMC ECREG(EC_REG_BASE_ADDR + 0x2010)
|
|
#define SPECTRL2 ECREG(EC_REG_BASE_ADDR + 0x2012)
|
|
#define SPECTRL3 ECREG(EC_REG_BASE_ADDR + 0x2016)
|
|
#define PI2ECH ECREG(EC_REG_BASE_ADDR + 0x2014)
|
|
#define PI2ECL ECREG(EC_REG_BASE_ADDR + 0x2015)
|
|
#define BINTADDR0R ECREG(EC_REG_BASE_ADDR + 0x2019)
|
|
#define BINTADDR1R ECREG(EC_REG_BASE_ADDR + 0x201A)
|
|
#define BINTCTRLR ECREG(EC_REG_BASE_ADDR + 0x201B)
|
|
#define SPCTRL4 ECREG(EC_REG_BASE_ADDR + 0x201C)
|
|
#define SHA1HASHCTRLR ECREG(EC_REG_BASE_ADDR + 0x202D)
|
|
#define SHA1HBADDR ECREG(EC_REG_BASE_ADDR + 0x202E)
|
|
#define MCCR ECREG(EC_REG_BASE_ADDR + 0x2030)
|
|
#define EIDSR ECREG(EC_REG_BASE_ADDR + 0x2031)
|
|
#define PMER1 ECREG(EC_REG_BASE_ADDR + 0x2032)
|
|
#define PMER2 ECREG(EC_REG_BASE_ADDR + 0x2033)
|
|
#define FRR0 ECREG(EC_REG_BASE_ADDR + 0x2034)
|
|
#define FRR1 ECREG(EC_REG_BASE_ADDR + 0x2035)
|
|
#define FRR2 ECREG(EC_REG_BASE_ADDR + 0x2036)
|
|
#define MCCR1 ECREG(EC_REG_BASE_ADDR + 0x203E)
|
|
#define IVTBAR ECREG(EC_REG_BASE_ADDR + 0x2041)
|
|
#define DMMYR ECREG(EC_REG_BASE_ADDR + 0x2045)
|
|
#define PWMENR ECREG(EC_REG_BASE_ADDR + 0x204A)
|
|
#define PDSCR1 ECREG(EC_REG_BASE_ADDR + 0x204C)
|
|
#define PDSCR2 ECREG(EC_REG_BASE_ADDR + 0x204D)
|
|
#define PDSCR3 ECREG(EC_REG_BASE_ADDR + 0x204E)
|
|
#define PDSCR4 ECREG(EC_REG_BASE_ADDR + 0x204F)
|
|
#define PDSCR5 ECREG(EC_REG_BASE_ADDR + 0x2050)
|
|
#define PDSCR6 ECREG(EC_REG_BASE_ADDR + 0x2051)
|
|
#define PDSCR7 ECREG(EC_REG_BASE_ADDR + 0x2052)
|
|
#define DRI_6_25 (0x00)
|
|
#define DRI_7_50 (0x01)
|
|
#define DRI_8_75 (0x02)
|
|
#define DRI_10_00 (0x03)
|
|
#define DRI_GPIOB0(x) ((x) << 6)
|
|
#define DRI_GPIOA6(x) ((x) << 4)
|
|
#define DRI_GPIOA5(x) ((x) << 2)
|
|
#define DRI_GPIOA4(x) ((x) << 0)
|
|
#define DRI_GPIOB4(x) ((x) << 6)
|
|
#define DRI_GPIOB3(x) ((x) << 4)
|
|
#define DRI_GPIOB2(x) ((x) << 2)
|
|
#define DRI_GPIOB1(x) ((x) << 0)
|
|
#define DRI_GPIOB5(x) ((x) << 0)
|
|
#define DRI_GPIOC3(x) ((x) << 4)
|
|
#define DRI_GPIOC2(x) ((x) << 2)
|
|
#define DRI_GPIOC1(x) ((x) << 0)
|
|
#define DRI_GPIOC7(x) ((x) << 4)
|
|
#define DRI_GPIOC6(x) ((x) << 2)
|
|
#define DRI_GPIOC5(x) ((x) << 0)
|
|
#define DRI_GPIOD5(x) ((x) << 6)
|
|
#define DRI_GPIOD4(x) ((x) << 4)
|
|
#define DRI_GPIOD3(x) ((x) << 2)
|
|
#define DRI_GPIOD2(x) ((x) << 0)
|
|
#define DRI_GPIOD7(x) ((x) << 2)
|
|
#define PMER5 ECREG(EC_REG_BASE_ADDR + 0x2057)
|
|
#define PIECR0 ECREG(EC_REG_BASE_ADDR + 0x205A)
|
|
#define PIECR1 ECREG(EC_REG_BASE_ADDR + 0x205B)
|
|
#define PIECR2 ECREG(EC_REG_BASE_ADDR + 0x205C)
|
|
#define PIECR3 ECREG(EC_REG_BASE_ADDR + 0x205D)
|
|
#define INTOSC ECREG(EC_REG_BASE_ADDR + 0x205E)
|
|
|
|
/**
|
|
*
|
|
* (21xxh) External GPIO Controller (EGPC)
|
|
*
|
|
*/
|
|
#define EADDR ECREG(EC_REG_BASE_ADDR + 0x2100)
|
|
#define EDAT ECREG(EC_REG_BASE_ADDR + 0x2101)
|
|
#define ECNT ECREG(EC_REG_BASE_ADDR + 0x2102)
|
|
#define ESTS ECREG(EC_REG_BASE_ADDR + 0x2103)
|
|
|
|
/**
|
|
*
|
|
* (23xxh) Consumer IR (CIR)
|
|
*
|
|
*/
|
|
#define C0DR ECREG(EC_REG_BASE_ADDR + 0x2300)
|
|
#define C0MSTCR ECREG(EC_REG_BASE_ADDR + 0x2301)
|
|
#define CIR_CTXSEL BIT(7)
|
|
#define CIR_CRXSEL BIT(6)
|
|
#define CIR_ILSEL BIT(5)
|
|
#define CIR_ILE BIT(4)
|
|
#define CIR_FIFOTL1 BIT(3)
|
|
#define CIR_FIFOTL0 BIT(2)
|
|
#define CIR_FIFOCLR BIT(1)
|
|
#define CIR_RESET BIT(0)
|
|
#define C0IER ECREG(EC_REG_BASE_ADDR + 0x2302)
|
|
#define C0IIR ECREG(EC_REG_BASE_ADDR + 0x2303)
|
|
#define C0CFR ECREG(EC_REG_BASE_ADDR + 0x2304)
|
|
#define C0RCR ECREG(EC_REG_BASE_ADDR + 0x2305)
|
|
#define CIR_RXEN BIT(7)
|
|
#define CIR_RDWOS BIT(5)
|
|
#define CIR_RXEND BIT(4)
|
|
#define CIR_RXACT BIT(3)
|
|
#define CIR_RXDCR2 BIT(2)
|
|
#define CIR_RXDCR1 BIT(1)
|
|
#define CIR_RXDCR0 BIT(0)
|
|
#define C0TCR ECREG(EC_REG_BASE_ADDR + 0x2306)
|
|
#define C0SCK ECREG(EC_REG_BASE_ADDR + 0x2307)
|
|
#define DLLOCK BIT(7)
|
|
#define BRCM2 BIT(6)
|
|
#define BRCM1 BIT(5)
|
|
#define BRCM0 BIT(4)
|
|
#define DLLTE BIT(3)
|
|
#define DLL1P8E BIT(2)
|
|
#define TXDCKG BIT(1)
|
|
#define SCKS BIT(0)
|
|
#define C0BDLR ECREG(EC_REG_BASE_ADDR + 0x2308)
|
|
#define C0BDHR ECREG(EC_REG_BASE_ADDR + 0x2309)
|
|
#define C0TFSR ECREG(EC_REG_BASE_ADDR + 0x230A)
|
|
#define C0RFSR ECREG(EC_REG_BASE_ADDR + 0x230B)
|
|
#define C0WCSSR ECREG(EC_REG_BASE_ADDR + 0x230C)
|
|
#define C0WCL ECREG(EC_REG_BASE_ADDR + 0x230D)
|
|
#define C0WCR ECREG(EC_REG_BASE_ADDR + 0x230E)
|
|
#define C0WPS ECREG(EC_REG_BASE_ADDR + 0x230F)
|
|
#define CSCRR ECREG(EC_REG_BASE_ADDR + 0x2310)
|
|
|
|
/**
|
|
*
|
|
* (25xxh) Debugger (DBGR)
|
|
*
|
|
*/
|
|
#define BKA1L ECREG(EC_REG_BASE_ADDR + 0x2510)
|
|
#define BKA1M ECREG(EC_REG_BASE_ADDR + 0x2511)
|
|
#define BKA1H ECREG(EC_REG_BASE_ADDR + 0x2512)
|
|
#define BKA2L ECREG(EC_REG_BASE_ADDR + 0x2513)
|
|
#define BKA2M ECREG(EC_REG_BASE_ADDR + 0x2514)
|
|
#define BKA2H ECREG(EC_REG_BASE_ADDR + 0x2515)
|
|
#define BKA3L ECREG(EC_REG_BASE_ADDR + 0x2516)
|
|
#define BKA3M ECREG(EC_REG_BASE_ADDR + 0x2517)
|
|
#define BKA3H ECREG(EC_REG_BASE_ADDR + 0x2518)
|
|
|
|
/**
|
|
*
|
|
* (26xxh) Serial Peripheral Interface (SSPI)
|
|
*
|
|
*/
|
|
#define SPI_BASE_ADDR (EC_REG_BASE_ADDR + 0x2600)
|
|
#define SPIDATA ECREG(EC_REG_BASE_ADDR + 0x2600)
|
|
#define SPICTRL1 ECREG(EC_REG_BASE_ADDR + 0x2601)
|
|
#define CHPOL BIT(7)
|
|
#define CLPOL BIT(6)
|
|
#define CLPHS BIT(5)
|
|
#define SCKFREQ2 BIT(4)
|
|
#define SCKFREQ1 BIT(3)
|
|
#define SCKFREQ0 BIT(2)
|
|
#define NTREN BIT(1)
|
|
#define WIRECH0 BIT(0)
|
|
#define SPICTRL2 ECREG(EC_REG_BASE_ADDR + 0x2602)
|
|
#define HBANK BIT(7)
|
|
#define DEVBUSYPOL BIT(6)
|
|
#define BYTEWIDTH2 BIT(5)
|
|
#define BYTEWIDTH1 BIT(4)
|
|
#define BYTEWIDTH0 BIT(3)
|
|
#define CHRW BIT(2)
|
|
#define BLKSEL BIT(1)
|
|
#define WIRECH1 BIT(0)
|
|
#define SPISTS ECREG(EC_REG_BASE_ADDR + 0x2603)
|
|
#define WAITBUSYSTART BIT(7)
|
|
#define DEVBUSY BIT(6)
|
|
#define TRANEND BIT(5)
|
|
#define CH0START BIT(4)
|
|
#define CH1START BIT(3)
|
|
#define TRANIP BIT(2)
|
|
#define TRANENDIF BIT(1)
|
|
#define SPIBUSY BIT(0)
|
|
#define SPICTRL3 ECREG(EC_REG_BASE_ADDR + 0x2604)
|
|
#define CMDQAUTOMODE BIT(5)
|
|
#define DEVBUSYMODE BIT(3)
|
|
#define CSPOLSEL BIT(2)
|
|
#define CHPOL1 BIT(1)
|
|
#define BUSYNOCLK BIT(0)
|
|
#define CH0CMDADDRLB ECREG(EC_REG_BASE_ADDR + 0x2605)
|
|
#define CH0CMDADDRHB ECREG(EC_REG_BASE_ADDR + 0x2606)
|
|
#define CH0CMDADDRHB2 ECREG(EC_REG_BASE_ADDR + 0x2621)
|
|
#define DMATCNTLB ECREG(EC_REG_BASE_ADDR + 0x2607)
|
|
#define DMATCNTHB ECREG(EC_REG_BASE_ADDR + 0x2608)
|
|
#define SPIWRCMDL ECREG(EC_REG_BASE_ADDR + 0x2609)
|
|
#define CH0DMARDLB ECREG(EC_REG_BASE_ADDR + 0x260A)
|
|
#define CH0DMARDHB ECREG(EC_REG_BASE_ADDR + 0x260B)
|
|
#define INTSTS ECREG(EC_REG_BASE_ADDR + 0x260C)
|
|
#define CH2CMDQEND (BIT(5) | BIT(6))
|
|
#define CH1CMDQEND BIT(6)
|
|
#define CH0CMDQEND BIT(5)
|
|
#define SPICMDQENDMASK BIT(4)
|
|
#define SPIRING1FI BIT(2)
|
|
#define SPIRING0FI BIT(1)
|
|
#define SPICMDQEND BIT(0)
|
|
#define SPICTRL5 ECREG(EC_REG_BASE_ADDR + 0x260D)
|
|
#define CH2SELCMDQ BIT(6)
|
|
#define CH1SELCMDQ BIT(5)
|
|
#define CH0SELCMDQ BIT(4)
|
|
#define CMDQMODE BIT(0)
|
|
#define CH0WRMEMADDRLB ECREG(EC_REG_BASE_ADDR + 0x260E)
|
|
#define CH0WRMEMADDRHB ECREG(EC_REG_BASE_ADDR + 0x260F)
|
|
#define CH0WRMEMADDRHB2 ECREG(EC_REG_BASE_ADDR + 0x2623)
|
|
#define CMDQINVPR ECREG(EC_REG_BASE_ADDR + 0x2610)
|
|
#define CH0WTSR ECREG(EC_REG_BASE_ADDR + 0x2611)
|
|
#define CH1CMDADDRLB ECREG(EC_REG_BASE_ADDR + 0x2612)
|
|
#define CH1CMDADDRHB ECREG(EC_REG_BASE_ADDR + 0x2613)
|
|
#define CH1WRMEMADDRLB ECREG(EC_REG_BASE_ADDR + 0x2614)
|
|
#define CH1WRMEMADDRHB ECREG(EC_REG_BASE_ADDR + 0x2615)
|
|
#define CH1WTSR ECREG(EC_REG_BASE_ADDR + 0x2616)
|
|
#define CH1DMARDLB ECREG(EC_REG_BASE_ADDR + 0x2617)
|
|
#define CH1DMARDHB ECREG(EC_REG_BASE_ADDR + 0x2618)
|
|
#define CH2CMDADDRLB ECREG(EC_REG_BASE_ADDR + 0x2619)
|
|
#define CH2CMDADDRHB ECREG(EC_REG_BASE_ADDR + 0x261A)
|
|
#define CH2WRMEMADDRLB ECREG(EC_REG_BASE_ADDR + 0x261B)
|
|
#define CH2WRMEMADDRHB ECREG(EC_REG_BASE_ADDR + 0x261C)
|
|
#define CH2WTSR ECREG(EC_REG_BASE_ADDR + 0x261D)
|
|
#define CH2DMARDLB ECREG(EC_REG_BASE_ADDR + 0x261E)
|
|
#define CH2DMARDHB ECREG(EC_REG_BASE_ADDR + 0x261F)
|
|
#define SPICTRL6 ECREG(EC_REG_BASE_ADDR + 0x2620)
|
|
#define CH2START BIT(3)
|
|
#define WIRECH2 BIT(0)
|
|
|
|
/**
|
|
*
|
|
* (27xxh) Extern Serial Port (UART1)
|
|
*
|
|
*/
|
|
#define REG_UART1_BASE (EC_REG_BASE_ADDR + 0x2700)
|
|
#define UART1_RBR ECREG(REG_UART1_BASE + 0x00)
|
|
#define UART1_IER ECREG(REG_UART1_BASE + 0x01)
|
|
#define UART1_IIR ECREG(REG_UART1_BASE + 0x02)
|
|
#define UART1_LCR ECREG(REG_UART1_BASE + 0x03)
|
|
#define UART1_MCR ECREG(REG_UART1_BASE + 0x04)
|
|
#define UART1_LSR ECREG(REG_UART1_BASE + 0x05)
|
|
#define UART1_MSR ECREG(REG_UART1_BASE + 0x06)
|
|
#define UART1_SCR ECREG(REG_UART1_BASE + 0x07)
|
|
#define UART1_ECSPMR ECREG(REG_UART1_BASE + 0x08)
|
|
#define UART1_SPPR ECREG(REG_UART1_BASE + 0x09)
|
|
#define UART1_UTBR ECREG(REG_UART1_BASE + 0x00)
|
|
#define UART1_UFCR ECREG(REG_UART1_BASE + 0x02)
|
|
#define UART1_UMSR ECREG(REG_UART1_BASE + 0x06)
|
|
#define UART1_USCR ECREG(REG_UART1_BASE + 0x07)
|
|
|
|
/**
|
|
*
|
|
* (28xxh) Extern Serial Port (UART2)
|
|
*
|
|
*/
|
|
#define REG_UART2_BASE (EC_REG_BASE_ADDR + 0x2800)
|
|
#define UART2_RBR ECREG(REG_UART2_BASE + 0x00)
|
|
#define UART2_IER ECREG(REG_UART2_BASE + 0x01)
|
|
#define UART2_IIR ECREG(REG_UART2_BASE + 0x02)
|
|
#define UART2_LCR ECREG(REG_UART2_BASE + 0x03)
|
|
#define UART2_MCR ECREG(REG_UART2_BASE + 0x04)
|
|
#define UART2_LSR ECREG(REG_UART2_BASE + 0x05)
|
|
#define UART2_MSR ECREG(REG_UART2_BASE + 0x06)
|
|
#define UART2_SCR ECREG(REG_UART2_BASE + 0x07)
|
|
#define UART2_ECSPMR ECREG(REG_UART2_BASE + 0x08)
|
|
#define UART2_UTBR ECREG(REG_UART2_BASE + 0x00)
|
|
#define UART2_UFCR ECREG(REG_UART2_BASE + 0x02)
|
|
#define UART2_UMSR ECREG(REG_UART2_BASE + 0x06)
|
|
#define UART2_USCR ECREG(REG_UART2_BASE + 0x07)
|
|
|
|
/**
|
|
*
|
|
* (29xxh) 8 Bit Timer (TMR)
|
|
*
|
|
*/
|
|
#define PRSC ECREG(EC_REG_BASE_ADDR + 0x2900)
|
|
#define GCSMS ECREG(EC_REG_BASE_ADDR + 0x2901)
|
|
#define CTR_A0 ECREG(EC_REG_BASE_ADDR + 0x2902)
|
|
#define CTR_A1 ECREG(EC_REG_BASE_ADDR + 0x2903)
|
|
#define CTR_B0 ECREG(EC_REG_BASE_ADDR + 0x2904)
|
|
#define CTR_B1 ECREG(EC_REG_BASE_ADDR + 0x2905)
|
|
#define DCR_A0 ECREG(EC_REG_BASE_ADDR + 0x2906)
|
|
#define DCR_A1 ECREG(EC_REG_BASE_ADDR + 0x2907)
|
|
#define DCR_B0 ECREG(EC_REG_BASE_ADDR + 0x2908)
|
|
#define DCR_B1 ECREG(EC_REG_BASE_ADDR + 0x2909)
|
|
#define CCGSR ECREG(EC_REG_BASE_ADDR + 0x290A)
|
|
#define TMRCE ECREG(EC_REG_BASE_ADDR + 0x290B)
|
|
#define TMEIE ECREG(EC_REG_BASE_ADDR + 0x290C)
|
|
|
|
/**
|
|
*
|
|
* (2Cxxh) Platform Environment Control Interface (PECI)
|
|
*
|
|
*/
|
|
#define HOSTAR ECREG(EC_REG_BASE_ADDR + 0x2C00)
|
|
#define TEMPERR BIT(7)
|
|
#define BUSERR BIT(6)
|
|
#define EXTERR BIT(5)
|
|
#define WR_FCS_ERR BIT(3)
|
|
#define RD_FCS_ERR BIT(2)
|
|
#define FINISH BIT(1)
|
|
#define HOBY BIT(0)
|
|
#define HOCTLR ECREG(EC_REG_BASE_ADDR + 0x2C01)
|
|
#define FIFOCLR BIT(5)
|
|
#define FCSERR_ABT BIT(4)
|
|
#define PECIHEN BIT(3)
|
|
#define CONCTRL BIT(2)
|
|
#define AWFCS_EN BIT(1)
|
|
#define PECISTART BIT(0)
|
|
#define HOCMDR ECREG(EC_REG_BASE_ADDR + 0x2C02)
|
|
#define HOTRADDR ECREG(EC_REG_BASE_ADDR + 0x2C03)
|
|
#define HOWRLR ECREG(EC_REG_BASE_ADDR + 0x2C04)
|
|
#define HORDLR ECREG(EC_REG_BASE_ADDR + 0x2C05)
|
|
#define HOWRDR ECREG(EC_REG_BASE_ADDR + 0x2C06)
|
|
#define HORDDR ECREG(EC_REG_BASE_ADDR + 0x2C07)
|
|
#define HOCTL2R ECREG(EC_REG_BASE_ADDR + 0x2C08)
|
|
#define RWFCSV ECREG(EC_REG_BASE_ADDR + 0x2C09)
|
|
#define RRFCSV ECREG(EC_REG_BASE_ADDR + 0x2C0A)
|
|
#define WFCSV ECREG(EC_REG_BASE_ADDR + 0x2C0B)
|
|
#define RFCSV ECREG(EC_REG_BASE_ADDR + 0x2C0C)
|
|
#define AWFCSV ECREG(EC_REG_BASE_ADDR + 0x2C0D)
|
|
#define PADCTLR ECREG(EC_REG_BASE_ADDR + 0x2C0E)
|
|
|
|
/**
|
|
*
|
|
* (2Dxxh) I2C/JTAG
|
|
*
|
|
*/
|
|
#define CLOCK_CGCTRL5R (REG_BASE_ADDR + 0x1E13)
|
|
#define CLK_C_MEMS_MIC 0x40
|
|
#define CLK_C_ADC 0x20
|
|
#define CLK_C_SPI_SLAVE 0x10
|
|
#define CLK_C_HF 0x08
|
|
#define CLK_C_USB 0x04
|
|
#define CLK_C_UART 0x02
|
|
#define CLK_C_SSPI 0x01
|
|
#define CLK_C_ALL 0x7F
|
|
#define GCTRL_BASE_ADDR (REG_BASE_ADDR + 0x2000)
|
|
#define GCTRL_PMER1 (GCTRL_BASE_ADDR + 0x32)
|
|
#define GCTRL_PMER2 (GCTRL_BASE_ADDR + 0x33)
|
|
#define PADIE0 (GCTRL_BASE_ADDR + 0x5A)
|
|
#define PADIE1 (GCTRL_BASE_ADDR + 0x5B)
|
|
#define PADIE2 (GCTRL_BASE_ADDR + 0x5C)
|
|
#define PADIE3 (GCTRL_BASE_ADDR + 0x5D)
|
|
|
|
/**
|
|
*
|
|
* (2Exxh) Consumer Electronics Control (CEC)
|
|
*
|
|
*/
|
|
#define CECDR ECREG(EC_REG_BASE_ADDR + 0x2E00)
|
|
#define CECFSTS ECREG(EC_REG_BASE_ADDR + 0x2E01)
|
|
#define CECDLA ECREG(EC_REG_BASE_ADDR + 0x2E02)
|
|
#define CECCTRL ECREG(EC_REG_BASE_ADDR + 0x2E03)
|
|
#define CECSTS ECREG(EC_REG_BASE_ADDR + 0x2E04)
|
|
#define CECIE ECREG(EC_REG_BASE_ADDR + 0x2E05)
|
|
#define CECOPSTS ECREG(EC_REG_BASE_ADDR + 0x2E06)
|
|
#define CECCRH ECREG(EC_REG_BASE_ADDR + 0x2E07)
|
|
|
|
/**
|
|
*
|
|
* (3Cxxh) Crypto Engine
|
|
*
|
|
*/
|
|
|
|
#define CE_CTRL_1ST ECREG(EC_REG_BASE_ADDR + 0x3C00)
|
|
#define CE_RNG ECREG(EC_REG_BASE_ADDR + 0x3C20)
|
|
|
|
|
|
/* Shared Memory Flash Interface Bridge (SMFI) registers */
|
|
|
|
#ifndef __ASSEMBLER__
|
|
struct flash_it8xxx2_regs {
|
|
volatile uint8_t reserved1[59];
|
|
/* 0x3B: EC-Indirect memory address 0 */
|
|
volatile uint8_t SMFI_ECINDAR0;
|
|
/* 0x3C: EC-Indirect memory address 1 */
|
|
volatile uint8_t SMFI_ECINDAR1;
|
|
/* 0x3D: EC-Indirect memory address 2 */
|
|
volatile uint8_t SMFI_ECINDAR2;
|
|
/* 0x3E: EC-Indirect memory address 3 */
|
|
volatile uint8_t SMFI_ECINDAR3;
|
|
/* 0x3F: EC-Indirect memory data */
|
|
volatile uint8_t SMFI_ECINDDR;
|
|
/* 0x40: Scratch SRAM 0 address low byte */
|
|
volatile uint8_t SMFI_SCAR0L;
|
|
/* 0x41: Scratch SRAM 0 address middle byte */
|
|
volatile uint8_t SMFI_SCAR0M;
|
|
/* 0x42: Scratch SRAM 0 address high byte */
|
|
volatile uint8_t SMFI_SCAR0H;
|
|
volatile uint8_t reserved2[95];
|
|
/* 0xA2: Flash control 6 */
|
|
volatile uint8_t SMFI_FLHCTRL6R;
|
|
};
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
/* SMFI register fields */
|
|
|
|
/* EC-Indirect read internal flash */
|
|
#define EC_INDIRECT_READ_INTERNAL_FLASH BIT(6)
|
|
/* Enable EC-indirect page program command */
|
|
#define IT8XXX2_SMFI_MASK_ECINDPP BIT(3)
|
|
/* Scratch SRAM 0 address(BIT(19)) */
|
|
#define IT8XXX2_SMFI_SC0A19 BIT(7)
|
|
/* Scratch SRAM enable */
|
|
#define IT8XXX2_SMFI_SCAR0H_ENABLE BIT(3)
|
|
|
|
/* --- GPIO --- */
|
|
#define IT8XXX2_GPIO_BASE 0x00F01600
|
|
#define IT8XXX2_GPIO2_BASE 0x00F03E00
|
|
|
|
#define IT8XXX2_GPIO_GCR ECREG(IT8XXX2_GPIO_BASE + 0x00)
|
|
|
|
#define IT8XXX2_GPIO_GCRX(offset) ECREG(IT8XXX2_GPIO_BASE + (offset))
|
|
#define IT8XXX2_GPIO_GCR25_OFFSET 0xd1
|
|
#define IT8XXX2_GPIO_GCR26_OFFSET 0xd2
|
|
#define IT8XXX2_GPIO_GCR27_OFFSET 0xd3
|
|
#define IT8XXX2_GPIO_GCR28_OFFSET 0xd4
|
|
#define IT8XXX2_GPIO_GCR31_OFFSET 0xd5
|
|
#define IT8XXX2_GPIO_GCR32_OFFSET 0xd6
|
|
#define IT8XXX2_GPIO_GCR33_OFFSET 0xd7
|
|
#define IT8XXX2_GPIO_GCR19_OFFSET 0xe4
|
|
#define IT8XXX2_GPIO_GCR20_OFFSET 0xe5
|
|
#define IT8XXX2_GPIO_GCR21_OFFSET 0xe6
|
|
#define IT8XXX2_GPIO_GCR22_OFFSET 0xe7
|
|
#define IT8XXX2_GPIO_GCR23_OFFSET 0xe8
|
|
#define IT8XXX2_GPIO_GCR24_OFFSET 0xe9
|
|
#define IT8XXX2_GPIO_GCR30_OFFSET 0xed
|
|
#define IT8XXX2_GPIO_GCR29_OFFSET 0xee
|
|
/* TODO: correct GRCx to GCRx */
|
|
#define IT8XXX2_GPIO_GRC1 ECREG(IT8XXX2_GPIO_BASE + 0xF0)
|
|
#define IT8XXX2_GPIO_GRC21 ECREG(IT8XXX2_GPIO_BASE + 0xE6)
|
|
|
|
#define IT8XXX2_GPIO_GPCRP0 ECREG(IT8XXX2_GPIO2_BASE + 0x18)
|
|
#define IT8XXX2_GPIO_GPCRP1 ECREG(IT8XXX2_GPIO2_BASE + 0x19)
|
|
|
|
/* Analog to Digital Converter (ADC) */
|
|
|
|
#ifndef __ASSEMBLER__
|
|
struct adc_it8xxx2_regs {
|
|
volatile uint8_t ADCSTS;
|
|
volatile uint8_t ADCCFG;
|
|
volatile uint8_t ADCCTL;
|
|
volatile uint8_t ADCGCR;
|
|
volatile uint8_t VCH0CTL;
|
|
volatile uint8_t KDCTL;
|
|
volatile uint8_t reserved1[18];
|
|
volatile uint8_t VCH0DATL;
|
|
volatile uint8_t VCH0DATM;
|
|
volatile uint8_t reserved2[42];
|
|
volatile uint8_t ADCDVSTS;
|
|
};
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
/* ADC conversion time select 1 */
|
|
#define IT8XXX2_ADC_ADCCTS1 BIT(7)
|
|
/* Analog accuracy initialization */
|
|
#define IT8XXX2_ADC_AINITB BIT(3)
|
|
/* ADC conversion time select 0 */
|
|
#define IT8XXX2_ADC_ADCCTS0 BIT(5)
|
|
/* ADC module enable */
|
|
#define IT8XXX2_ADC_ADCEN BIT(0)
|
|
/* ADC data buffer keep enable */
|
|
#define IT8XXX2_ADC_DBKEN BIT(7)
|
|
/* W/C data valid flag */
|
|
#define IT8XXX2_ADC_DATVAL BIT(7)
|
|
/* Data valid interrupt of adc */
|
|
#define IT8XXX2_ADC_INTDVEN BIT(5)
|
|
/* Automatic hardware calibration enable */
|
|
#define IT8XXX2_ADC_AHCE BIT(7)
|
|
|
|
/*
|
|
* Clock and Power Management (ECPM)
|
|
*/
|
|
#define IT83XX_ECPM_BASE 0x00F01E00
|
|
|
|
#define IT83XX_ECPM_CGCTRL4R_OFF 0x09
|
|
|
|
#define CGC_OFFSET_SMBF ((IT83XX_ECPM_CGCTRL4R_OFF << 8) | 0x80)
|
|
#define CGC_OFFSET_SMBE ((IT83XX_ECPM_CGCTRL4R_OFF << 8) | 0x40)
|
|
#define CGC_OFFSET_SMBD ((IT83XX_ECPM_CGCTRL4R_OFF << 8) | 0x20)
|
|
#define CGC_OFFSET_SMBC ((IT83XX_ECPM_CGCTRL4R_OFF << 8) | 0x10)
|
|
#define CGC_OFFSET_SMBB ((IT83XX_ECPM_CGCTRL4R_OFF << 8) | 0x08)
|
|
#define CGC_OFFSET_SMBA ((IT83XX_ECPM_CGCTRL4R_OFF << 8) | 0x04)
|
|
|
|
/* TODO: rename IT83XX_ECPM_BASE to IT8XXX2_ECPM_BASE */
|
|
#define IT8XXX2_ECPM_PLLCTRL ECREG(IT83XX_ECPM_BASE + 0x03)
|
|
#ifndef __ASSEMBLER__
|
|
enum chip_pll_mode {
|
|
CHIP_PLL_DOZE = 0,
|
|
CHIP_PLL_SLEEP = 1,
|
|
CHIP_PLL_DEEP_DOZE = 3,
|
|
};
|
|
#endif
|
|
#define IT8XXX2_ECPM_AUTOCG ECREG(IT83XX_ECPM_BASE + 0x04)
|
|
#define IT8XXX2_ECPM_CGCTRL3R ECREG(IT83XX_ECPM_BASE + 0x05)
|
|
#define IT8XXX2_ECPM_PLLFREQR ECREG(IT83XX_ECPM_BASE + 0x06)
|
|
#define IT8XXX2_ECPM_PLLCSS ECREG(IT83XX_ECPM_BASE + 0x08)
|
|
#define IT8XXX2_ECPM_SCDCR0 ECREG(IT83XX_ECPM_BASE + 0x0c)
|
|
#define IT8XXX2_ECPM_SCDCR1 ECREG(IT83XX_ECPM_BASE + 0x0d)
|
|
#define IT8XXX2_ECPM_SCDCR2 ECREG(IT83XX_ECPM_BASE + 0x0e)
|
|
#define IT8XXX2_ECPM_SCDCR3 ECREG(IT83XX_ECPM_BASE + 0x0f)
|
|
#define IT8XXX2_ECPM_SCDCR4 ECREG(IT83XX_ECPM_BASE + 0x10)
|
|
|
|
/*
|
|
* The count number of the counter for 25 ms register.
|
|
* The 25 ms register is calculated by (count number *1.024 kHz).
|
|
*/
|
|
|
|
#define I2C_CLK_LOW_TIMEOUT 255 /* ~=249 ms */
|
|
|
|
/* SMBus/I2C Interface (SMB/I2C) */
|
|
#define IT83XX_SMB_BASE 0x00F01C00
|
|
#define IT83XX_SMB_4P7USL ECREG(IT83XX_SMB_BASE+0x00)
|
|
#define IT83XX_SMB_4P0USL ECREG(IT83XX_SMB_BASE+0x01)
|
|
#define IT83XX_SMB_300NS ECREG(IT83XX_SMB_BASE+0x02)
|
|
#define IT83XX_SMB_250NS ECREG(IT83XX_SMB_BASE+0x03)
|
|
#define IT83XX_SMB_25MS ECREG(IT83XX_SMB_BASE+0x04)
|
|
#define IT83XX_SMB_45P3USL ECREG(IT83XX_SMB_BASE+0x05)
|
|
#define IT83XX_SMB_45P3USH ECREG(IT83XX_SMB_BASE+0x06)
|
|
#define IT83XX_SMB_4P7A4P0H ECREG(IT83XX_SMB_BASE+0x07)
|
|
#define IT83XX_SMB_SLVISELR ECREG(IT83XX_SMB_BASE+0x08)
|
|
#define IT83XX_SMB_SCLKTS(ch) ECREG(IT83XX_SMB_BASE+0x09+ch)
|
|
#define IT83XX_SMB_CHSEF ECREG(IT83XX_SMB_BASE+0x11)
|
|
#define IT83XX_SMB_CHSAB ECREG(IT83XX_SMB_BASE+0x20)
|
|
#define IT83XX_SMB_CHSCD ECREG(IT83XX_SMB_BASE+0x21)
|
|
#define IT83XX_SMB_HOSTA(base) ECREG(base+0x00)
|
|
#define IT83XX_SMB_HOCTL(base) ECREG(base+0x01)
|
|
#define IT83XX_SMB_HOCMD(base) ECREG(base+0x02)
|
|
#define IT83XX_SMB_TRASLA(base) ECREG(base+0x03)
|
|
#define IT83XX_SMB_D0REG(base) ECREG(base+0x04)
|
|
#define IT83XX_SMB_D1REG(base) ECREG(base+0x05)
|
|
#define IT83XX_SMB_HOBDB(base) ECREG(base+0x06)
|
|
#define IT83XX_SMB_PECERC(base) ECREG(base+0x07)
|
|
#define IT83XX_SMB_SMBPCTL(base) ECREG(base+0x0A)
|
|
#define IT83XX_SMB_HOCTL2(base) ECREG(base+0x10)
|
|
|
|
/**
|
|
* Enhanced SMBus/I2C Interface
|
|
* Ch_D: 0x00F03680, Ch_E: 0x00F03500, Ch_F: 0x00F03580
|
|
* Ch_D: ch = 0x03, Ch_E: ch = 0x00, Ch_F: ch = 0x01
|
|
*/
|
|
#define IT83XX_I2C_DRR(base) ECREG(base+0x00)
|
|
#define IT83XX_I2C_PSR(base) ECREG(base+0x01)
|
|
#define IT83XX_I2C_HSPR(base) ECREG(base+0x02)
|
|
#define IT83XX_I2C_STR(base) ECREG(base+0x03)
|
|
#define IT83XX_I2C_DHTR(base) ECREG(base+0x04)
|
|
#define IT83XX_I2C_TOR(base) ECREG(base+0x05)
|
|
#define IT83XX_I2C_DTR(base) ECREG(base+0x08)
|
|
#define IT83XX_I2C_CTR(base) ECREG(base+0x09)
|
|
#define IT83XX_I2C_CTR1(base) ECREG(base+0x0A)
|
|
#define IT83XX_I2C_BYTE_CNT_L(base) ECREG(base+0x0C)
|
|
#define IT83XX_I2C_IRQ_ST(base) ECREG(base+0x0D)
|
|
#define IT83XX_I2C_IDR(base) ECREG(base+0x06)
|
|
#define IT83XX_I2C_TOS(base) ECREG(base+0x07)
|
|
#define IT83XX_I2C_IDR2(base) ECREG(base+0x1F)
|
|
#define IT83XX_I2C_RAMHA(base) ECREG(base+0x23)
|
|
#define IT83XX_I2C_RAMLA(base) ECREG(base+0x24)
|
|
#define IT83XX_I2C_RAMHA2(base) ECREG(base+0x2B)
|
|
#define IT83XX_I2C_RAMLA2(base) ECREG(base+0x2C)
|
|
#define IT83XX_I2C_CMD_ADDH(base) ECREG(base+0x25)
|
|
#define IT83XX_I2C_CMD_ADDL(base) ECREG(base+0x26)
|
|
#define IT83XX_I2C_RAMH2A(base) ECREG(base+0x50)
|
|
#define IT83XX_I2C_CMD_ADDH2(base) ECREG(base+0x52)
|
|
|
|
/* --- General Control (GCTRL) --- */
|
|
#define IT83XX_GCTRL_BASE 0x00F02000
|
|
|
|
#ifdef IT83XX_CHIP_ID_3BYTES
|
|
#define IT83XX_GCTRL_CHIPID1 ECREG(IT83XX_GCTRL_BASE + 0x85)
|
|
#define IT83XX_GCTRL_CHIPID2 ECREG(IT83XX_GCTRL_BASE + 0x86)
|
|
#define IT83XX_GCTRL_CHIPID3 ECREG(IT83XX_GCTRL_BASE + 0x87)
|
|
#else
|
|
#define IT83XX_GCTRL_CHIPID1 ECREG(IT83XX_GCTRL_BASE + 0x00)
|
|
#define IT83XX_GCTRL_CHIPID2 ECREG(IT83XX_GCTRL_BASE + 0x01)
|
|
#endif
|
|
#define IT83XX_GCTRL_CHIPVER ECREG(IT83XX_GCTRL_BASE + 0x02)
|
|
#define IT83XX_GCTRL_DBGROS ECREG(IT83XX_GCTRL_BASE + 0x03)
|
|
#define IT83XX_SMB_DBGR BIT(0)
|
|
|
|
/*
|
|
* Writing 00h to this register and the CPU program counter will be paused
|
|
* until the next low to high transition of the 65.536 clock.
|
|
*/
|
|
#define IT83XX_GCTRL_WNCKR ECREG(IT83XX_GCTRL_BASE + 0x0B)
|
|
#define IT83XX_GCTRL_RSTS ECREG(IT83XX_GCTRL_BASE + 0x06)
|
|
#define IT83XX_GCTRL_BADRSEL ECREG(IT83XX_GCTRL_BASE + 0x0A)
|
|
#define IT83XX_GCTRL_SPCTRL1 ECREG(IT83XX_GCTRL_BASE + 0x0D)
|
|
#define IT83XX_GCTRL_RSTDMMC ECREG(IT83XX_GCTRL_BASE + 0x10)
|
|
#define IT83XX_GCTRL_RSTC4 ECREG(IT83XX_GCTRL_BASE + 0x11)
|
|
#define IT83XX_GCTRL_SPCTRL4 ECREG(IT83XX_GCTRL_BASE + 0x1C)
|
|
#define IT83XX_GCTRL_MCCR3 ECREG(IT83XX_GCTRL_BASE + 0x20)
|
|
#define IT83XX_GCTRL_SPISLVPFE BIT(6)
|
|
#define IT83XX_GCTRL_RSTC5 ECREG(IT83XX_GCTRL_BASE + 0x21)
|
|
#define IT83XX_GCTRL_MCCR ECREG(IT83XX_GCTRL_BASE + 0x30)
|
|
#define IT83XX_GCTRL_ICACHE_RESET BIT(4)
|
|
#define IT83XX_GCTRL_PMER1 ECREG(IT83XX_GCTRL_BASE + 0x32)
|
|
#define IT83XX_GCTRL_PMER2 ECREG(IT83XX_GCTRL_BASE + 0x33)
|
|
#define IT83XX_GCTRL_EPLR ECREG(IT83XX_GCTRL_BASE + 0x37)
|
|
#define IT83XX_GCTRL_EPLR_ENABLE BIT(0)
|
|
#define IT83XX_GCTRL_IVTBAR ECREG(IT83XX_GCTRL_BASE + 0x41)
|
|
#define IT83XX_GCTRL_MCCR2 ECREG(IT83XX_GCTRL_BASE + 0x44)
|
|
#define IT83XX_GCTRL_PIN_MUX0 ECREG(IT83XX_GCTRL_BASE + 0x46)
|
|
#define IT83XX_DLM14_ENABLE BIT(5)
|
|
#define IT83XX_GCTRL_SSCR ECREG(IT83XX_GCTRL_BASE + 0x4A)
|
|
#define IT83XX_GCTRL_ETWDUARTCR ECREG(IT83XX_GCTRL_BASE + 0x4B)
|
|
#define IT83XX_GCTRL_WMCR ECREG(IT83XX_GCTRL_BASE + 0x4C)
|
|
#define IT83XX_GCTRL_H2ROFSR ECREG(IT83XX_GCTRL_BASE + 0x53)
|
|
/* bit[0] = 0 or 1 : disable or enable ETWD hardware reset */
|
|
#define ETWD_HW_RST_EN BIT(0)
|
|
#define IT83XX_GCTRL_RVILMCR0 ECREG(IT83XX_GCTRL_BASE + 0x5D)
|
|
#define ILMCR_ILM0_ENABLE BIT(0)
|
|
#define ILMCR_ILM2_ENABLE BIT(2)
|
|
#define IT83XX_GCTRL_EWPR0PFH(i) ECREG(IT83XX_GCTRL_BASE + 0x60 + i)
|
|
#define IT83XX_GCTRL_EWPR0PFD(i) ECREG(IT83XX_GCTRL_BASE + 0xA0 + i)
|
|
#define IT83XX_GCTRL_EWPR0PFEC(i) ECREG(IT83XX_GCTRL_BASE + 0xC0 + i)
|
|
|
|
/* Serial Peripheral Interface (SPI) */
|
|
#define IT83XX_SPI_BASE 0x00F03A00
|
|
|
|
#define IT83XX_SPI_SPISGCR ECREG(IT83XX_SPI_BASE + 0x00)
|
|
#define IT83XX_SPI_SPISCEN BIT(0)
|
|
#define IT83XX_SPI_TXRXFAR ECREG(IT83XX_SPI_BASE + 0x01)
|
|
#define IT83XX_SPI_CPURXF2A BIT(4)
|
|
#define IT83XX_SPI_CPURXF1A BIT(3)
|
|
#define IT83XX_SPI_CPUTFA BIT(1)
|
|
#define IT83XX_SPI_TXFCR ECREG(IT83XX_SPI_BASE + 0x02)
|
|
#define IT83XX_SPI_TXFCMR BIT(2)
|
|
#define IT83XX_SPI_TXFR BIT(1)
|
|
#define IT83XX_SPI_TXFS BIT(0)
|
|
#define IT83XX_SPI_GCR2 ECREG(IT83XX_SPI_BASE + 0x03)
|
|
#define IT83XX_SPI_RXF2OC BIT(4)
|
|
#define IT83XX_SPI_RXF1OC BIT(3)
|
|
#define IT83XX_SPI_RXFAR BIT(0)
|
|
#define IT83XX_SPI_IMR ECREG(IT83XX_SPI_BASE + 0x04)
|
|
#define IT83XX_SPI_RX_FIFO_FULL BIT(7)
|
|
#define IT83XX_SPI_RX_REACH BIT(5)
|
|
#define IT83XX_SPI_EDIM BIT(2)
|
|
#define IT83XX_SPI_ISR ECREG(IT83XX_SPI_BASE + 0x05)
|
|
#define IT83XX_SPI_TXFSR ECREG(IT83XX_SPI_BASE + 0x06)
|
|
#define IT83XX_SPI_ENDDETECTINT BIT(2)
|
|
#define IT83XX_SPI_RXFSR ECREG(IT83XX_SPI_BASE + 0x07)
|
|
#define IT83XX_SPI_RXFFSM (BIT(4) | BIT(3))
|
|
#define IT83XX_SPI_RXF2FS BIT(2)
|
|
#define IT83XX_SPI_RXF1FS BIT(1)
|
|
#ifdef CHIP_VARIANT_IT83202BX
|
|
#define IT83XX_SPI_SPISRDR ECREG(IT83XX_SPI_BASE + 0x08)
|
|
#else
|
|
#define IT83XX_SPI_SPISRDR ECREG(IT83XX_SPI_BASE + 0x0b)
|
|
#endif
|
|
#define IT83XX_SPI_CPUWTFDB0 ECREG_u32(IT83XX_SPI_BASE + 0x08)
|
|
#define IT83XX_SPI_FCR ECREG(IT83XX_SPI_BASE + 0x09)
|
|
#define IT83XX_SPI_SPISRTXF BIT(2)
|
|
#define IT83XX_SPI_RXFR BIT(1)
|
|
#define IT83XX_SPI_RXFCMR BIT(0)
|
|
#define IT83XX_SPI_RXFRDRB0 ECREG_u32(IT83XX_SPI_BASE + 0x0C)
|
|
#define IT83XX_SPI_FTCB0R ECREG(IT83XX_SPI_BASE + 0x18)
|
|
#define IT83XX_SPI_FTCB1R ECREG(IT83XX_SPI_BASE + 0x19)
|
|
#define IT83XX_SPI_TCCB0 ECREG(IT83XX_SPI_BASE + 0x1A)
|
|
#define IT83XX_SPI_TCCB1 ECREG(IT83XX_SPI_BASE + 0x1B)
|
|
#define IT83XX_SPI_HPR2 ECREG(IT83XX_SPI_BASE + 0x1E)
|
|
#define IT83XX_SPI_EMMCBMR ECREG(IT83XX_SPI_BASE + 0x21)
|
|
#define IT83XX_SPI_EMMCABM BIT(1) /* eMMC Alternative Boot Mode */
|
|
#define IT83XX_SPI_RX_VLISMR ECREG(IT83XX_SPI_BASE + 0x26)
|
|
#define IT83XX_SPI_RVLIM BIT(0)
|
|
#define IT83XX_SPI_RX_VLISR ECREG(IT83XX_SPI_BASE + 0x27)
|
|
#define IT83XX_SPI_RVLI BIT(0)
|
|
|
|
/**
|
|
*
|
|
* (20xxh) General Control (GCTRL) registers
|
|
*
|
|
*/
|
|
#ifndef __ASSEMBLER__
|
|
struct gctrl_it8xxx2_regs {
|
|
/* 0x00-0x01: Reserved1 */
|
|
volatile uint8_t reserved1[2];
|
|
/* 0x02: Chip Version */
|
|
volatile uint8_t GCTRL_ECHIPVER;
|
|
/* 0x03-0x05: Reserved2 */
|
|
volatile uint8_t reserved2[3];
|
|
/* 0x06: Reset Status */
|
|
volatile uint8_t GCTRL_RSTS;
|
|
/* 0x07-0x1B: Reserved3 */
|
|
volatile uint8_t reserved3[21];
|
|
/* 0x1C: Special Control 4 */
|
|
volatile uint8_t GCTRL_SPCTRL4;
|
|
/* 0x1D-0x1F: Reserved4 */
|
|
volatile uint8_t reserved4[3];
|
|
/* 0x20: Memory Controller Configuration 3 */
|
|
volatile uint8_t GCTRL_MCCR3;
|
|
/* 0x21: Reset Control 5 */
|
|
volatile uint8_t GCTRL_RSTC5;
|
|
/* 0x22-0x2F: Reserved5 */
|
|
volatile uint8_t reserved5[14];
|
|
/* 0x30: Memory Controller Configuration */
|
|
volatile uint8_t GCTRL_MCCR;
|
|
/* 0x31: Externel ILM/DLM Size */
|
|
volatile uint8_t GCTRL_EIDSR;
|
|
/* 0x32-0x36: Reserved6 */
|
|
volatile uint8_t reserved6[5];
|
|
/* 0x37: Eflash Protect Lock */
|
|
volatile uint8_t GCTRL_EPLR;
|
|
/* 0x38-0x40: Reserved7 */
|
|
volatile uint8_t reserved7[9];
|
|
/* 0x41: Interrupt Vector Table Base Address */
|
|
volatile uint8_t GCTRL_IVTBAR;
|
|
/* 0x42-0x43: Reserved8 */
|
|
volatile uint8_t reserved8[2];
|
|
/* 0x44: Memory Controller Configuration 2 */
|
|
volatile uint8_t GCTRL_MCCR2;
|
|
/* 0x45: Reserved9 */
|
|
volatile uint8_t reserved9;
|
|
/* 0x46: Pin Multi-function Enable 3 */
|
|
volatile uint8_t GCTRL_PMER3;
|
|
/* 0x47-0x4A: Reserved10 */
|
|
volatile uint8_t reserved10[4];
|
|
/* 0x4B: ETWD and UART Control */
|
|
volatile uint8_t GCTRL_ETWDUARTCR;
|
|
/* 0x4C: Wakeup MCU Control */
|
|
volatile uint8_t GCTRL_WMCR;
|
|
/* 0x4D-0x84: Reserved11 */
|
|
volatile uint8_t reserved11[56];
|
|
/* 0x85: Chip ID Byte 1 */
|
|
volatile uint8_t GCTRL_ECHIPID1;
|
|
/* 0x86: Chip ID Byte 2 */
|
|
volatile uint8_t GCTRL_ECHIPID2;
|
|
/* 0x87: Chip ID Byte 3 */
|
|
volatile uint8_t GCTRL_ECHIPID3;
|
|
};
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
/* GCTRL register fields */
|
|
/* 0x06: Reset Status */
|
|
#define IT8XXX2_GCTRL_LRS (BIT(1) | BIT(0))
|
|
#define IT8XXX2_GCTRL_IWDTR BIT(1)
|
|
/* 0x1C: Special Control 4 */
|
|
#define IT8XXX2_GCTRL_LRSIWR BIT(2)
|
|
#define IT8XXX2_GCTRL_LRSIPWRSWTR BIT(1)
|
|
#define IT8XXX2_GCTRL_LRSIPGWR BIT(0)
|
|
/* 0x4B: ETWD and UART Control */
|
|
#define IT8XXX2_GCTRL_ETWD_HW_RST_EN BIT(0)
|
|
|
|
#endif /* CHIP_CHIPREGS_H */
|