8c6f49c845
Align clock accuracy used in CSL calculations to the value in platform. This is recomended setting for devices working in wide range temperature. Nevertheless it can be profiled in end product to decrease CSL window duration and finally the power consumption. Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
150 lines
3.8 KiB
Text
150 lines
3.8 KiB
Text
# IEEE 802.15.4 driver configuration options
|
|
|
|
# Copyright (c) 2015 Intel Corporation
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
#
|
|
# IEEE 802.15.4 options
|
|
#
|
|
menuconfig IEEE802154
|
|
bool "IEEE 802.15.4 drivers options"
|
|
default y if NET_L2_PHY_IEEE802154
|
|
|
|
if IEEE802154
|
|
|
|
config IEEE802154_NET_IF_NO_AUTO_START
|
|
bool "IEEE 802.15.4 interface without auto-start"
|
|
help
|
|
This option allows user to set any configuration and/or filter before
|
|
the radio becomes operational. For instance, the EUI-64 value can be
|
|
configured using net_if_set_link_addr(iface, mac, 8,
|
|
NET_LINK_IEEE802154).
|
|
When all configurations are done net_if_up() has to be invoked to
|
|
bring the interface up.
|
|
|
|
This option can be useful when using OpenThread or Zigbee. If you
|
|
have any doubt about this option leave it as default value.
|
|
|
|
config IEEE802154_RAW_MODE
|
|
bool "IEEE 802.15.4 driver without the MAC stack"
|
|
select NET_RAW_MODE
|
|
help
|
|
This option enables using the drivers in a so-called "raw" mode,
|
|
i.e. without a MAC stack (the net L2 layer for 802.15.4 will not
|
|
be built). Used only for very specific cases, such as wpan_serial
|
|
and wpanusb samples.
|
|
|
|
config IEEE802154_RDEV
|
|
bool
|
|
help
|
|
PHY is a ranging-capable device (RDEV)
|
|
|
|
config IEEE802154_VENDOR_OUI_ENABLE
|
|
bool "Support setting Vendor Organizationally Unique Identifier"
|
|
help
|
|
This option enables setting custom vendor
|
|
OUI using IEEE802154_VENDOR_OUI. After enabling,
|
|
user is obliged to set IEEE802154_VENDOR_OUI value,
|
|
as this option has no default value.
|
|
|
|
if IEEE802154_VENDOR_OUI_ENABLE
|
|
|
|
config IEEE802154_VENDOR_OUI
|
|
int "Vendor Organizationally Unique Identifier"
|
|
help
|
|
Custom vendor OUI, which makes 24 most-significant
|
|
bits of MAC address
|
|
|
|
endif # IEEE802154_VENDOR_OUI_ENABLE
|
|
|
|
source "drivers/ieee802154/Kconfig.b91"
|
|
|
|
source "drivers/ieee802154/Kconfig.cc2520"
|
|
|
|
source "drivers/ieee802154/Kconfig.kw41z"
|
|
|
|
source "drivers/ieee802154/Kconfig.mcr20a"
|
|
|
|
source "drivers/ieee802154/Kconfig.nrf5"
|
|
|
|
source "drivers/ieee802154/Kconfig.cc1200"
|
|
|
|
source "drivers/ieee802154/Kconfig.cc13xx_cc26xx"
|
|
|
|
source "drivers/ieee802154/Kconfig.rf2xx"
|
|
|
|
source "drivers/ieee802154/Kconfig.dw1000"
|
|
|
|
menuconfig IEEE802154_UPIPE
|
|
bool "UART PIPE fake radio driver support for QEMU"
|
|
depends on (BOARD_QEMU_X86 || BOARD_QEMU_CORTEX_M3) && NETWORKING
|
|
select UART_PIPE
|
|
|
|
if IEEE802154_UPIPE
|
|
|
|
config IEEE802154_UPIPE_DRV_NAME
|
|
string "UART PIPE Driver name"
|
|
default "IEEE802154_UPIPE"
|
|
|
|
config IEEE802154_UPIPE_HW_FILTER
|
|
bool "Hw Filtering"
|
|
default y
|
|
help
|
|
This option assure the driver will process just frames addressed to him.
|
|
|
|
config IEEE802154_UPIPE_RANDOM_MAC
|
|
bool "Random MAC address"
|
|
default y
|
|
help
|
|
Generate a random MAC address dynamically.
|
|
|
|
if ! IEEE802154_UPIPE_RANDOM_MAC
|
|
|
|
config IEEE802154_UPIPE_MAC4
|
|
hex "MAC Address Byte 4"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 4 of the MAC address.
|
|
|
|
config IEEE802154_UPIPE_MAC5
|
|
hex "MAC Address Byte 5"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 5 of the MAC address.
|
|
|
|
config IEEE802154_UPIPE_MAC6
|
|
hex "MAC Address Byte 6"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 6 of the MAC address.
|
|
|
|
config IEEE802154_UPIPE_MAC7
|
|
hex "MAC Address Byte 7"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 7 of the MAC address.
|
|
|
|
endif # IEEE802154_UPIPE_RANDOM_MAC
|
|
|
|
endif # IEEE802154_UPIPE
|
|
|
|
config IEEE802154_2015
|
|
bool "Support for IEEE 802.15.4-2015 frames"
|
|
help
|
|
Enable radio driver support for IEEE 802.15.4-2015 frames, including security handling of frames and ACKs.
|
|
|
|
config IEEE802154_CSL_ENDPOINT
|
|
bool "Support for CSL Endpoint"
|
|
help
|
|
Enable support for CSL Endpoint with delayed reception handling and CSL IE injection.
|
|
|
|
module = IEEE802154_DRIVER
|
|
module-str = IEEE 802.15.4 driver
|
|
module-help = Sets log level for IEEE 802.15.4 Device Drivers.
|
|
source "subsys/logging/Kconfig.template.log_config"
|
|
|
|
endif # IEEE802154
|