michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/drivers/sensor
History
Piotr Mienkowski a922fd1b2f drivers: qdec_sam: disable index signal 
`qdec_sam` driver supports currently only position measurement and does
not support reading of the index signal. Unfortunately, the index
signal was internally enabled in the driver. If the pin to which the
index signal was connected was used by another driver it could lead to
a false detection of the signal change. Detection of the index signal
change resets the position measurement.

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2022-01-28 10:07:06 +01:00
..
adt7420 drivers: sensor: adt7420: check gpio add callback return code 2021-08-26 18:40:08 -04:00
adxl345 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
adxl362 drivers: sensor: adxl362: improve error handling 2021-08-30 17:53:24 -04:00
adxl372 drivers: sensor: adxl372: add missing error handling 2021-08-30 17:53:24 -04:00
ak8975 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
amg88xx drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
ams_iAQcore drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
apds9960 pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
bma280 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
bmc150_magn drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
bme280 drivers: sensor: drop get_dev_data/get_dev_config usage 2022-01-19 18:16:02 +01:00
bme680 drivers: remove redundant data/config casts 2022-01-19 18:16:02 +01:00
bmg160 drivers: sensor: bmg160: check gpio calls return code 2021-08-26 18:40:08 -04:00
bmi160 drivers: sensor: drop get_dev_data/get_dev_config usage 2022-01-19 18:16:02 +01:00
bmi270 drivers: fix double promotion warnings 2021-11-24 17:14:25 -05:00
bmm150 drivers: sensors: fix of sensor channel get for z axis 2021-08-24 09:40:26 -05:00
bmp388 drivers: sensor: drop DEV_DATA/DEV_CFG usage 2022-01-19 18:16:02 +01:00
bq274xx pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
ccs811 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
dht drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
dps310 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
ens210 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
fdc2x1x pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
fxas21002 drivers: sensor: fxas21002: check gpio calls return code 2021-08-26 18:40:08 -04:00
fxos8700 drivers: sensor: fxos8700: Keep current power mode when setting ODR 2021-10-28 10:10:52 -05:00
grove sensor: grove: fix cmake empty library warning 2021-08-18 19:08:41 -05:00
hmc5883l drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
hp206c drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
hts221 drivers/sensors: Enable 3-wire SPI access to HTS221 sensor driver 2021-11-19 11:50:38 +01:00
i3g4250d drivers: sensor: add I3G4250D Gyro driver 2021-09-28 19:44:26 -04:00
icm42605 drivers: sensor: icm42605: convert to spi_dt_spec 2021-12-09 10:20:41 -06:00
iis2dh drivers: Apply SPI API change to relevant places 2021-11-19 11:50:38 +01:00
iis2dlpc drivers/sensor: stmemsc: make use of spi_dt_spec and i2c_dt_spec 2021-10-22 09:06:07 -05:00
iis2iclx drivers/sensor: stmemsc: make use of spi_dt_spec and i2c_dt_spec 2021-10-22 09:06:07 -05:00
iis2mdc drivers: Apply SPI API change to relevant places 2021-11-19 11:50:38 +01:00
iis3dhhc drivers: Apply SPI API change to relevant places 2021-11-19 11:50:38 +01:00
ina23x drivers: sensor: ina23x: add support for INA237 2021-12-14 13:48:54 -06:00
ina219 pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
isl29035 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
ism330dhcx drivers: Apply SPI API change to relevant places 2021-11-19 11:50:38 +01:00
ite_tach_it8xxx2 ITE drivers/sensor: add tachometer driver for it8xxx2_evb 2021-11-29 08:25:19 -05:00
lis2dh drivers: sensor: lis2dh: Allow power-down mode 2021-11-29 18:19:18 -05:00
lis2ds12 drivers/sensor: lis2ds12: Move odr Kconfig property into dts 2021-10-22 09:06:07 -05:00
lis2dw12 drivers/sensor: stmemsc: make use of spi_dt_spec and i2c_dt_spec 2021-10-22 09:06:07 -05:00
lis2mdl pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
lis3mdl drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
lm75 drivers: remove redundant data/config casts 2022-01-19 18:16:02 +01:00
lm77 pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
lps22hb drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
lps22hh drivers/sensor: lps22hh: Move odr Kconfig property into dts 2021-12-14 09:11:15 -06:00
lps25hb drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
lsm6ds0 drivers: fix double promotion warnings 2021-11-24 17:14:25 -05:00
lsm6dsl drivers: fix double promotion warnings 2021-11-24 17:14:25 -05:00
lsm6dso drivers/sensor: lsm6dso: Add power mode properties to DTS 2021-12-18 07:58:50 -05:00
lsm9ds0_gyro drivers: fix double promotion warnings 2021-11-24 17:14:25 -05:00
lsm9ds0_mfd drivers: fix double promotion warnings 2021-11-24 17:14:25 -05:00
lsm303dlhc_magn drivers: sensor: lsm303dlhc_mag: Fix gain factor 2021-10-04 20:40:43 -04:00
max6675 drivers: sensor: max6675: convert to spi_dt_spec 2021-12-09 10:21:13 -06:00
max17055 drivers: avoid i2c_burst_write where possible 2021-12-22 12:14:42 +01:00
max17262 drivers: sensor: max17262: use instance based macros 2021-12-17 17:30:06 +01:00
max30101 dts: fix max30101 compatible 2021-08-17 17:51:57 -04:00
max44009 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
mchp_tach_xec drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
mcp9808 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
mcux_acmp drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
mhz19b drivers: sensor: Add MH-Z19B CO2 sensor driver 2021-12-20 18:47:47 +01:00
mpr drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
mpu6050 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
mpu9250 sensors: Implement MPU9250 driver 2022-01-14 12:33:04 +01:00
ms5607 drivers: Apply SPI API change to relevant places 2021-11-19 11:50:38 +01:00
ms5837 drivers: sensors: build as static libraries 2021-08-17 06:06:03 -04:00
nrf5 drivers: nrf5: kconfig: add missing dependency for TEMP_NRF5 2021-12-01 16:10:59 +01:00
nuvoton_tach_npcx drivers: npcx: Drop DRV_CONFIG/DRV_DATA usage 2022-01-28 10:06:05 +01:00
nxp_kinetis_temp drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
opt3001 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
pms7003 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
qdec_nrfx pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
qdec_sam drivers: qdec_sam: disable index signal 2022-01-28 10:07:06 +01:00
sbs_gauge drivers: remove redundant data/config casts 2022-01-19 18:16:02 +01:00
sgp40 pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
sht3xd drivers: remove redundant data/config casts 2022-01-19 18:16:02 +01:00
sht4x drivers: sensor: SHT4X: convert to i2c_dt_spec 2021-08-17 12:40:17 -05:00
shtcx drivers: sensor: shtcx: fix 2021-11-29 18:18:42 -05:00
si7006 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
si7055 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
si7060 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
si7210 pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
sm351lt drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
stm32_temp sensors: STM32: Add support for L5 die temp sensor 2022-01-13 10:34:10 +01:00
stmemsc drivers/sensor: stmemsc: make use of i2c/spi dt APIs 2021-12-13 10:21:43 -06:00
stts751 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
sx9500 drivers: sensor: sx9500: check gpio calls return code 2021-08-26 18:40:08 -04:00
th02 drivers: sensor: remove usage of device_pm_control_nop 2021-04-28 15:30:03 -04:00
ti_hdc drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
ti_hdc20xx drivers: sensors: ti_hdc20xx: add support for DRDY/INT pin 2021-08-09 11:32:43 -04:00
tmp007 drivers: sensor: clean up zephyr_library calls 2021-06-30 09:36:33 -04:00
tmp108 sample: sensor: tmp108: Add ti tmp108 sample 2021-12-17 21:15:25 +01:00
tmp112 drivers: avoid i2c_burst_write where possible 2021-12-22 12:14:42 +01:00
tmp116 sensor: eeprom: Add TMP116 EEPROM access 2021-12-08 07:51:46 -06:00
vcnl4040 pm: s/PM_DEVICE_(DT_(INST))_REF/PM_DEVICE_(DT_(INST))_GET 2022-01-18 12:14:06 -05:00
vl53l0x drivers: remove redundant data/config casts 2022-01-19 18:16:02 +01:00
wsen_itds drivers: use DT_INST_ENUM_IDX(_OR) macros 2021-11-18 19:12:07 -05:00
CMakeLists.txt sensors: Implement MPU9250 driver 2022-01-14 12:33:04 +01:00
Kconfig sensors: Implement MPU9250 driver 2022-01-14 12:33:04 +01:00
sensor_handlers.c device: Const-ify all device driver instance pointers 2020-09-02 13:48:13 +02:00
sensor_shell.c drivers: sensor_shell: add missing power sensor channel 2021-10-19 07:15:55 -04:00
shell_battery.c sensor: shell: add missing va_ends 2021-01-18 19:08:04 +01:00