zephyr/drivers/adc/adc_renesas_ra.c

/*
 * Copyright (c) 2024 Renesas Electronics Corporation
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#define DT_DRV_COMPAT renesas_ra_adc

#include <zephyr/drivers/adc.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/drivers/reset.h>
#include <zephyr/logging/log.h>
#include <instances/r_adc.h>

#include <zephyr/irq.h>

LOG_MODULE_REGISTER(adc_ra, CONFIG_ADC_LOG_LEVEL);

#define ADC_CONTEXT_USES_KERNEL_TIMER
#include "adc_context.h"

#define ADC_RA_MAX_RESOLUTION 12

void adc_scan_end_isr(void);

/**
 * @brief RA ADC config
 *
 * This structure contains constant data for given instance of RA ADC.
 */
struct adc_ra_config {
	/** Number of supported channels */
	uint8_t num_channels;
	/** pinctrl configs */
	const struct pinctrl_dev_config *pcfg;
	/** function pointer to irq setup */
	void (*irq_configure)(void);
};

/**
 * @brief RA ADC data
 *
 * This structure contains data structures used by a RA ADC.
 */
struct adc_ra_data {
	/** Structure that handle state of ongoing read operation */
	struct adc_context ctx;
	/** Pointer to RA ADC own device structure */
	const struct device *dev;
	/** Structure that handle fsp ADC */
	adc_instance_ctrl_t adc;
	/** Structure that handle fsp ADC config */
	struct st_adc_cfg f_config;
	/** Structure that handle fsp ADC channel config */
	adc_channel_cfg_t f_channel_cfg;
	/** Pointer to memory where next sample will be written */
	uint16_t *buf;
	/** Mask with channels that will be sampled */
	uint32_t channels;
	/** Buffer id */
	uint16_t buf_id;
};

/**
 * @brief Setup channels before starting to scan ADC
 *
 * @param dev RA ADC device
 * @param channel_cfg channel configuration
 *
 * @return 0 on success
 * @return -ENOTSUP if channel id or differential is wrong value
 * @return -EINVAL if channel configuration is invalid
 */
static int adc_ra_channel_setup(const struct device *dev, const struct adc_channel_cfg *channel_cfg)
{
	fsp_err_t fsp_err = FSP_SUCCESS;
	struct adc_ra_data *data = dev->data;

	if (!((channel_cfg->channel_id >= 0 && channel_cfg->channel_id <= 2) ||
	      (channel_cfg->channel_id >= 4 && channel_cfg->channel_id <= 8) ||
	      (channel_cfg->channel_id >= 16 && channel_cfg->channel_id <= 19))) {
		LOG_ERR("unsupported channel id '%d'", channel_cfg->channel_id);
		return -ENOTSUP;
	}

	if (channel_cfg->acquisition_time != ADC_ACQ_TIME_DEFAULT) {
		LOG_ERR("Acquisition time is not valid");
		return -EINVAL;
	}

	if (channel_cfg->differential) {
		LOG_ERR("unsupported differential mode");
		return -ENOTSUP;
	}

	if (channel_cfg->gain != ADC_GAIN_1) {
		LOG_ERR("Gain is not valid");
		return -EINVAL;
	}

	data->f_channel_cfg.scan_mask |= (1U << channel_cfg->channel_id);
	/* Configure ADC channel specific settings */
	fsp_err = R_ADC_ScanCfg(&data->adc, &data->f_channel_cfg);
	if (FSP_SUCCESS != fsp_err) {
		return -ENOTSUP;
	}

	return 0;
}

/**
 * Interrupt handler
 */
static void adc_ra_isr(const struct device *dev)
{
	struct adc_ra_data *data = dev->data;
	fsp_err_t fsp_err = FSP_SUCCESS;
	adc_channel_t channel_id = 0;
	uint32_t channels = 0;
	int16_t *sample_buffer = (int16_t *)data->buf;

	channels = data->channels;
	for (channel_id = 0; channels > 0; channel_id++) {
		/* Check if it is right channel id */
		if ((channels & 0x01) != 0) {
			fsp_err = R_ADC_Read(&data->adc, channel_id, &sample_buffer[data->buf_id]);
			if (FSP_SUCCESS != fsp_err) {
				break;
			}
			data->buf_id = data->buf_id + 1;
		}

		channels = channels >> 1;
	}
	adc_scan_end_isr();
	adc_context_on_sampling_done(&data->ctx, dev);
}

/**
 * @brief Check if buffer in @p sequence is big enough to hold all ADC samples
 *
 * @param dev RA ADC device
 * @param sequence ADC sequence description
 *
 * @return 0 on success
 * @return -ENOMEM if buffer is not big enough
 */
static int adc_ra_check_buffer_size(const struct device *dev, const struct adc_sequence *sequence)
{
	const struct adc_ra_config *config = dev->config;
	uint8_t channels = 0;
	size_t needed;
	uint32_t mask;

	for (mask = BIT(config->num_channels - 1); mask != 0; mask >>= 1) {
		if (mask & sequence->channels) {
			channels++;
		}
	}

	needed = channels * sizeof(uint16_t);
	if (sequence->options) {
		needed *= (1 + sequence->options->extra_samplings);
	}

	if (sequence->buffer_size < needed) {
		return -ENOMEM;
	}

	return 0;
}

/**
 * @brief Start processing read request
 *
 * @param dev RA ADC device
 * @param sequence ADC sequence description
 *
 * @return 0 on success
 * @return -ENOTSUP if requested resolution or channel is out side of supported
 *         range
 * @return -ENOMEM if buffer is not big enough
 *         (see @ref adc_ra_check_buffer_size)
 * @return other error code returned by adc_context_wait_for_completion
 */
static int adc_ra_start_read(const struct device *dev, const struct adc_sequence *sequence)
{
	const struct adc_ra_config *config = dev->config;
	struct adc_ra_data *data = dev->data;
	int err;

	if (sequence->resolution > ADC_RA_MAX_RESOLUTION || sequence->resolution == 0) {
		LOG_ERR("unsupported resolution %d", sequence->resolution);
		return -ENOTSUP;
	}

	if (find_msb_set(sequence->channels) > config->num_channels) {
		LOG_ERR("unsupported channels in mask: 0x%08x", sequence->channels);
		return -ENOTSUP;
	}

	err = adc_ra_check_buffer_size(dev, sequence);
	if (err) {
		LOG_ERR("buffer size too small");
		return err;
	}

	data->buf_id = 0;
	data->buf = sequence->buffer;
	adc_context_start_read(&data->ctx, sequence);

	adc_context_wait_for_completion(&data->ctx);

	return 0;
}

/**
 * @brief Start processing read request asynchronously
 *
 * @param dev RA ADC device
 * @param sequence ADC sequence description
 * @param async async pointer to asynchronous signal
 *
 * @return 0 on success
 * @return -ENOTSUP if requested resolution or channel is out side of supported
 *         range
 * @return -ENOMEM if buffer is not big enough
 *         (see @ref adc_ra_check_buffer_size)
 * @return other error code returned by adc_context_wait_for_completion
 */
static int adc_ra_read_async(const struct device *dev, const struct adc_sequence *sequence,
			     struct k_poll_signal *async)
{
	struct adc_ra_data *data = dev->data;
	int err;

	adc_context_lock(&data->ctx, async ? true : false, async);
	err = adc_ra_start_read(dev, sequence);
	adc_context_release(&data->ctx, err);

	return err;
}

/**
 * @brief Start processing read request synchronously
 *
 * @param dev RA ADC device
 * @param sequence ADC sequence description
 *
 * @return 0 on success
 * @return -ENOTSUP if requested resolution or channel is out side of supported
 *         range
 * @return -ENOMEM if buffer is not big enough
 *         (see @ref adc_ra_check_buffer_size)
 * @return other error code returned by adc_context_wait_for_completion
 */
static int adc_ra_read(const struct device *dev, const struct adc_sequence *sequence)
{
	return adc_ra_read_async(dev, sequence, NULL);
}

static void adc_context_start_sampling(struct adc_context *ctx)
{
	struct adc_ra_data *data = CONTAINER_OF(ctx, struct adc_ra_data, ctx);

	data->channels = ctx->sequence.channels;

	R_ADC_ScanStart(&data->adc);
}

static void adc_context_update_buffer_pointer(struct adc_context *ctx, bool repeat_sampling)
{
	struct adc_ra_data *data = CONTAINER_OF(ctx, struct adc_ra_data, ctx);

	if (repeat_sampling) {
		data->buf_id = 0;
	}
}

/**
 * @brief Function called on init for each RA ADC device. It setups all
 *        channels to return constant 0 mV and create acquisition thread.
 *
 * @param dev RA ADC device
 *
 * @return -EIO if error
 *
 * @return 0 on success
 */
static int adc_ra_init(const struct device *dev)
{
	const struct adc_ra_config *config = dev->config;
	struct adc_ra_data *data = dev->data;
	int ret;
	fsp_err_t fsp_err = FSP_SUCCESS;

	ret = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
	if (ret < 0) {
		return ret;
	}

	/* Open ADC module */
	fsp_err = R_ADC_Open(&data->adc, &data->f_config);
	if (FSP_SUCCESS != fsp_err) {
		return -EIO;
	}

	config->irq_configure();

	adc_context_unlock_unconditionally(&data->ctx);
	return 0;
}

const adc_extended_cfg_t g_adc_cfg_extend = {
	.add_average_count = ADC_ADD_OFF,
	.clearing = ADC_CLEAR_AFTER_READ_ON,
	.trigger_group_b = ADC_START_SOURCE_DISABLED,
	.double_trigger_mode = ADC_DOUBLE_TRIGGER_DISABLED,
	.adc_vref_control = ADC_VREF_CONTROL_VREFH,
	.enable_adbuf = 0,
	.window_a_irq = FSP_INVALID_VECTOR,
	.window_a_ipl = (1),
	.window_b_irq = FSP_INVALID_VECTOR,
	.window_b_ipl = (BSP_IRQ_DISABLED),
	.trigger = ADC_START_SOURCE_DISABLED, /* Use Software trigger */
};

#define IRQ_CONFIGURE_FUNC(idx)                                                                    \
	static void adc_ra_configure_func_##idx(void)                                              \
	{                                                                                          \
		R_ICU->IELSR[DT_INST_IRQ_BY_NAME(idx, scanend, irq)] =                             \
			ELC_EVENT_ADC##idx##_SCAN_END;                                             \
		IRQ_CONNECT(DT_INST_IRQ_BY_NAME(idx, scanend, irq),                                \
			    DT_INST_IRQ_BY_NAME(idx, scanend, priority), adc_ra_isr,               \
			    DEVICE_DT_INST_GET(idx), 0);                                           \
		irq_enable(DT_INST_IRQ_BY_NAME(idx, scanend, irq));                                \
	}

#define IRQ_CONFIGURE_DEFINE(idx) .irq_configure = adc_ra_configure_func_##idx

#define ADC_RA_INIT(idx)                                                                           \
	IRQ_CONFIGURE_FUNC(idx)                                                                    \
	PINCTRL_DT_INST_DEFINE(idx);                                                               \
	static DEVICE_API(adc, adc_ra_api_##idx) = {                                               \
		.channel_setup = adc_ra_channel_setup,                                             \
		.read = adc_ra_read,                                                               \
		.ref_internal = DT_INST_PROP(idx, vref_mv),                                        \
		IF_ENABLED(CONFIG_ADC_ASYNC, (.read_async = adc_ra_read_async))};                  \
	static const struct adc_ra_config adc_ra_config_##idx = {                                  \
		.num_channels = DT_INST_PROP(idx, channel_count),                                  \
		.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(idx),                                       \
		IRQ_CONFIGURE_DEFINE(idx),                                                         \
	};                                                                                         \
	static struct adc_ra_data adc_ra_data_##idx = {                                            \
		ADC_CONTEXT_INIT_TIMER(adc_ra_data_##idx, ctx),                                    \
		ADC_CONTEXT_INIT_LOCK(adc_ra_data_##idx, ctx),                                     \
		ADC_CONTEXT_INIT_SYNC(adc_ra_data_##idx, ctx),                                     \
		.dev = DEVICE_DT_INST_GET(idx),                                                    \
		.f_config =                                                                        \
			{                                                                          \
				.unit = idx,                                                       \
				.mode = ADC_MODE_SINGLE_SCAN,                                      \
				.resolution = ADC_RESOLUTION_12_BIT,                               \
				.alignment = (adc_alignment_t)ADC_ALIGNMENT_RIGHT,                 \
				.trigger = 0,                                                      \
				.p_callback = NULL,                                                \
				.p_context = NULL,                                                 \
				.p_extend = &g_adc_cfg_extend,                                     \
				.scan_end_irq = DT_INST_IRQ_BY_NAME(idx, scanend, irq),            \
				.scan_end_ipl = DT_INST_IRQ_BY_NAME(idx, scanend, priority),       \
				.scan_end_b_irq = FSP_INVALID_VECTOR,                              \
				.scan_end_b_ipl = (BSP_IRQ_DISABLED),                              \
			},                                                                         \
		.f_channel_cfg =                                                                   \
			{                                                                          \
				.scan_mask = 0,                                                    \
				.scan_mask_group_b = 0,                                            \
				.priority_group_a = ADC_GROUP_A_PRIORITY_OFF,                      \
				.add_mask = 0,                                                     \
				.sample_hold_mask = 0,                                             \
				.sample_hold_states = 24,                                          \
				.p_window_cfg = NULL,                                              \
			},                                                                         \
	};                                                                                         \
                                                                                                   \
	DEVICE_DT_INST_DEFINE(idx, adc_ra_init, NULL, &adc_ra_data_##idx, &adc_ra_config_##idx,    \
			      POST_KERNEL, CONFIG_ADC_INIT_PRIORITY, &adc_ra_api_##idx)

DT_INST_FOREACH_STATUS_OKAY(ADC_RA_INIT);