eccf03265f
- New SPI HCI driver for ST BlueNRG modules
- More memory optimizations through TX buffer pool consolidation
- Refactoring to take advantage of new IS_ENABLED() macro
- Fixes to LE L2CAP Credit-based Flow Control
- Various smaller fixes & enhancements here and there
----------------------------------------------------------------
Arkadiusz Lichwa (2):
Bluetooth: UUID: Fix format specifier in 128-UUID
Bluetooth: ATT: Fix redundant sys_slist call
Arun Jagadish (1):
Bluetooth: AVDTP: Added params to AVDTP Request structure
Carles Cufi (1):
bluetooth: hci_core: Fix conn params validity check
Jaganath Kanakkassery (1):
Bluetooth: RFCOMM: Implement Aggregate Flow Control
Johan Hedberg (21):
Bluetooth: Consolidate most outgoing ACL TX buffers into a single pool
Bluetooth: Use the controller bt_rand() whenever possible
Bluetooth: Controller: Rename hci_le_rand to bt_rand
Bluetooth: hci_uart: Remove redundant idle & ISR stack size values
Bluetooth: Remove unused bt_hci_driver_unregister() API
Bluetooth: Add missing documentation to HCI driver APIs
Bluetooth: GATT: Fix missing connection address comparison
Bluetooth: ATT: Add new error code from CSSv7
Bluetooth: Prefer struct bt_le_conn_param over individual values
Bluetooth: Add documentation for connection callbacks
Bluetooth: Remove ACL details from BT_BUF_RX_SIZE
Bluetooth: L2CAP: Remove RECV_RESERVE from BT_L2CAP_RX_MTU
Bluetooth: Introduce a new connection parameter request callback
Bluetooth: Take advantage of IS_ENABLED macro for BT_DBG
Bluetooth: Add __printf_like annotation for bt_log
Bluetooth: drivers/nble: Remove bogus BT_DBG manipulation
Bluetooth: hci_core: Take advantage of IS_ENABLED whenever possible
Bluetooth: conn: Take advantage of IS_ENABLED whenever possible
Bluetooth: L2CAP: Take advantage of IS_ENABLED whenever possible
Bluetooth: SMP: Take advantage of IS_ENABLED whenever possible
Bluetooth: Don't select TinyCrypt RNG for combined builds
Lee Jones (5):
pinmux/stm32l4: Add support for STM32L SPI1 and SPI3
pinmux/nucleo_l476rg: Define pinmuxing for SPI1 and SPI3
Bluetooth: Add HCI SPI driver
Bluetooth: samples/beacon: Print message at start of sample
Bluetooth: Kconfig: Specify stack size for Bluetooth SPI
Luiz Augusto von Dentz (4):
Bluetooth: L2CAP: Fix using CONFIG_BLUETOOTH_RX_BUF_LEN as MTU
Bluetooth: IPSP: Reuse buffer fragments instead of copying
Bluetooth: L2CAP: Make sure state is correctly updated
Bluetooth: L2CAP: Fix always using RX_BUF_COUNT as initial credits
Sathish Narasimman (1):
Bluetooth: AT: Rename enum at_cmd_type elements
drivers/bluetooth/hci/Kconfig | 81 +++
drivers/bluetooth/hci/Makefile | 1 +
drivers/bluetooth/hci/h4.c | 8 +-
drivers/bluetooth/hci/h5.c | 8 +-
drivers/bluetooth/hci/spi.c | 351 ++++++++++++
drivers/bluetooth/nble/conn.c | 8 +-
drivers/bluetooth/nble/gap.c | 13 +-
drivers/bluetooth/nble/gatt.c | 8 +-
drivers/bluetooth/nble/rpc_deserialize.c | 27 +-
drivers/bluetooth/nble/rpc_serialize.c | 5 -
drivers/bluetooth/nble/smp.c | 3 +-
drivers/bluetooth/nble/uart.c | 6 +-
drivers/bluetooth/nrf51_pm.c | 1 +
.../pinmux/stm32/pinmux_board_nucleo_l476rg.c | 12 +
drivers/pinmux/stm32/pinmux_stm32l4x.h | 10 +
include/bluetooth/att.h | 1 +
include/bluetooth/buf.h | 1 -
include/bluetooth/conn.h | 81 ++-
include/bluetooth/l2cap.h | 2 +
include/bluetooth/log.h | 40 +-
include/drivers/bluetooth/hci_driver.h | 106 +++-
samples/bluetooth/beacon/src/main.c | 2 +
samples/bluetooth/hci_uart/nrf5.conf | 2 -
samples/bluetooth/ipsp/src/main.c | 35 +-
subsys/bluetooth/controller/hal/nrf5/rand.c | 2 +-
subsys/bluetooth/controller/hal/rand.h | 2 +-
subsys/bluetooth/controller/hci/hci.c | 4 +-
subsys/bluetooth/controller/hci/hci_driver.c | 18 +-
subsys/bluetooth/controller/hci/hci_internal.h | 1 -
subsys/bluetooth/controller/ll/ctrl.c | 1 +
subsys/bluetooth/host/Kconfig | 63 ++-
subsys/bluetooth/host/a2dp.c | 7 +-
subsys/bluetooth/host/at.c | 38 +-
subsys/bluetooth/host/at.h | 10 +-
subsys/bluetooth/host/att.c | 65 +--
subsys/bluetooth/host/att_internal.h | 6 +
subsys/bluetooth/host/avdtp.c | 24 +-
subsys/bluetooth/host/avdtp_internal.h | 10 +-
subsys/bluetooth/host/conn.c | 157 +++---
subsys/bluetooth/host/conn_internal.h | 4 +-
subsys/bluetooth/host/gatt.c | 12 +-
subsys/bluetooth/host/hci_core.c | 504 +++++++++---------
subsys/bluetooth/host/hci_core.h | 5 +-
subsys/bluetooth/host/hci_ecc.c | 11 +-
subsys/bluetooth/host/hci_raw.c | 8 +-
subsys/bluetooth/host/hfp_hf.c | 6 +-
subsys/bluetooth/host/keys.c | 6 +-
subsys/bluetooth/host/keys.h | 4 -
subsys/bluetooth/host/keys_br.c | 6 +-
subsys/bluetooth/host/l2cap.c | 108 ++--
subsys/bluetooth/host/l2cap_br.c | 32 +-
subsys/bluetooth/host/l2cap_internal.h | 8 +-
subsys/bluetooth/host/log.c | 2 -
subsys/bluetooth/host/monitor.c | 1 -
subsys/bluetooth/host/rfcomm.c | 148 ++++-
subsys/bluetooth/host/rfcomm_internal.h | 15 +
subsys/bluetooth/host/sdp.c | 6 +-
subsys/bluetooth/host/smp.c | 211 ++++----
subsys/bluetooth/host/smp_null.c | 7 +-
subsys/bluetooth/host/storage.c | 1 +
subsys/bluetooth/host/uuid.c | 2 +-
tests/bluetooth/shell/arduino_101.conf | 2 +-
tests/bluetooth/shell/prj.conf | 2 +-
63 files changed, 1479 insertions(+), 852 deletions(-)
create mode 100644 drivers/bluetooth/hci/spi.c
Change-Id: Ic11028e1f02636a48d95cbe03735af37cea94e25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
||
|---|---|---|
| .. | ||
| bluetooth | ||
| booting/stub | ||
| compliance | ||
| crypto | ||
| drivers | ||
| fs/fat_fs | ||
| include | ||
| kernel | ||
| legacy | ||
| net | ||
| power/power_states | ||
| subsys/debug/gdb_server | ||
| unit | ||
| ztest | ||
| defaults.tc | ||
| Kconfig | ||
| Makefile | ||
| Makefile.test | ||