michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/soc/arm/nordic_nrf/validate_base_addresses.c
Andrzej Głąbek 3e93f9f67d modules: hal: nordic: Fix translation of peripheral symbols 
Update the hal_nordic module revision, to apply the following changes:

nrfx_config: Fix translation of symbols for _S or _NS only peripherals

For peripherals with only one type of access available (either secure
or non-secure), the common symbol translation scheme cannot be used
as it leads to mapping to non-existing symbols (e.g. NRF_FICR_NS).
Instead, use fixed translations for these symbols (e.g. NRF_FICR to
NRF_FICR_S, only for secure images).

nrfx_config: Add missing _S/_NS symbol translations for nRF5340/nRF9160

Add translations of names with _S and _NS suffixes for peripheral
access symbols that are available for a given chip but were not used
so far in any nrfx HAL or driver, to make the lists of translations
complete and consistent.

This commit corrects also the translation of NRF_I2S symbol for nRF5340
whose name for this SoC contains also the index 0 (so it needs to be
handled similarly like NRF_PDM0 is).

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2020-03-10 17:21:27 +01:00

284 lines
9.7 KiB
C
Raw Blame History

/*
* Copyright (c) 2019 Nordic Semiconductor ASA
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <kernel.h>
/*
* This inclusion is needed for nRF51 for two reasons:
* - for GPIO peripheral, MDK defines only the legacy NRF_GPIO symbol;
* the GPIO HAL included below maps this symbol to NRF_P0, for consistency
* with all other nRF SoCs
* - currently for nRF51, <soc.h> is not included through <kernel.h>,
* consequently <nrfx.h> is not included as well and MDK definitions
* are missing; the below inclusion fills this gap
*/
#include <hal/nrf_gpio.h>
/*
* Provide translation of symbols for peripherals that for some SoCs got names
* without the index.
*/
#ifndef NRF_I2S0
#define NRF_I2S0 NRF_I2S
#endif
#ifndef NRF_PDM0
#define NRF_PDM0 NRF_PDM
#endif
#ifndef NRF_WDT0
#define NRF_WDT0 NRF_WDT
#endif
#define CHECK_ADDRESS(dts, mdk) BUILD_ASSERT((u32_t)(dts) == (u32_t)(mdk))
#if defined(DT_NORDIC_NRF_ADC_ADC_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_ADC_ADC_0_BASE_ADDRESS, NRF_ADC);
#endif
#if defined(DT_NORDIC_NRF_CC310_CC310_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_CC310_CC310_BASE_ADDRESS, NRF_CRYPTOCELL);
#endif
#if defined(DT_INST_0_NORDIC_NRF_CLOCK_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_CLOCK_BASE_ADDRESS, NRF_CLOCK);
#endif
#if defined(DT_INST_0_NORDIC_NRF_DPPIC_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_DPPIC_BASE_ADDRESS, NRF_DPPIC);
#endif
#if defined(DT_NORDIC_NRF_EGU_EGU_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_EGU_EGU_0_BASE_ADDRESS, NRF_EGU0);
#endif
#if defined(DT_NORDIC_NRF_EGU_EGU_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_EGU_EGU_1_BASE_ADDRESS, NRF_EGU1);
#endif
#if defined(DT_NORDIC_NRF_EGU_EGU_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_EGU_EGU_2_BASE_ADDRESS, NRF_EGU2);
#endif
#if defined(DT_NORDIC_NRF_EGU_EGU_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_EGU_EGU_3_BASE_ADDRESS, NRF_EGU3);
#endif
#if defined(DT_NORDIC_NRF_EGU_EGU_4_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_EGU_EGU_4_BASE_ADDRESS, NRF_EGU4);
#endif
#if defined(DT_NORDIC_NRF_EGU_EGU_5_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_EGU_EGU_5_BASE_ADDRESS, NRF_EGU5);
#endif
#if defined(DT_INST_0_NORDIC_NRF_FICR_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_FICR_BASE_ADDRESS, NRF_FICR);
#endif
#if defined(DT_NORDIC_NRF_GPIO_GPIO_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_GPIO_GPIO_0_BASE_ADDRESS, NRF_P0);
#endif
#if defined(DT_NORDIC_NRF_GPIO_GPIO_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_GPIO_GPIO_1_BASE_ADDRESS, NRF_P1);
#endif
#if defined(DT_NORDIC_NRF_GPIOTE_GPIOTE_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_GPIOTE_GPIOTE_0_BASE_ADDRESS, NRF_GPIOTE);
#endif
#if defined(DT_NORDIC_NRF_I2S_I2S_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_I2S_I2S_0_BASE_ADDRESS, NRF_I2S0);
#endif
#if defined(DT_INST_0_NORDIC_NRF_IPC_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_IPC_BASE_ADDRESS, NRF_IPC);
#endif
#if defined(DT_INST_0_NORDIC_NRF_KMU_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_KMU_BASE_ADDRESS, NRF_KMU);
#endif
#if defined(DT_INST_0_NORDIC_NRF51_FLASH_CONTROLLER_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF51_FLASH_CONTROLLER_BASE_ADDRESS, NRF_NVMC);
#endif
#if defined(DT_INST_0_NORDIC_NRF52_FLASH_CONTROLLER_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF52_FLASH_CONTROLLER_BASE_ADDRESS, NRF_NVMC);
#endif
#if defined(DT_INST_0_NORDIC_NRF91_FLASH_CONTROLLER_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF91_FLASH_CONTROLLER_BASE_ADDRESS, NRF_NVMC);
#endif
#if defined(DT_NORDIC_NRF_PDM_PDM_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_PDM_PDM_0_BASE_ADDRESS, NRF_PDM0);
#endif
#if defined(DT_INST_0_NORDIC_NRF_POWER_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_POWER_BASE_ADDRESS, NRF_POWER);
#endif
#if defined(DT_NORDIC_NRF_PWM_PWM_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_PWM_PWM_0_BASE_ADDRESS, NRF_PWM0);
#endif
#if defined(DT_NORDIC_NRF_PWM_PWM_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_PWM_PWM_1_BASE_ADDRESS, NRF_PWM1);
#endif
#if defined(DT_NORDIC_NRF_PWM_PWM_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_PWM_PWM_2_BASE_ADDRESS, NRF_PWM2);
#endif
#if defined(DT_NORDIC_NRF_PWM_PWM_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_PWM_PWM_3_BASE_ADDRESS, NRF_PWM3);
#endif
#if defined(DT_NORDIC_NRF_QDEC_QDEC_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_QDEC_QDEC_0_BASE_ADDRESS, NRF_QDEC);
#endif
#if defined(DT_INST_0_NORDIC_NRF_REGULATORS_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_REGULATORS_BASE_ADDRESS, NRF_REGULATORS);
#endif
#if defined(DT_INST_0_NORDIC_NRF_RNG_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_RNG_BASE_ADDRESS, NRF_RNG);
#endif
#if defined(DT_NORDIC_NRF_RTC_RTC_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_RTC_RTC_0_BASE_ADDRESS, NRF_RTC0);
#endif
#if defined(DT_NORDIC_NRF_RTC_RTC_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_RTC_RTC_1_BASE_ADDRESS, NRF_RTC1);
#endif
#if defined(DT_NORDIC_NRF_RTC_RTC_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_RTC_RTC_2_BASE_ADDRESS, NRF_RTC2);
#endif
#if defined(DT_NORDIC_NRF_SAADC_ADC_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SAADC_ADC_0_BASE_ADDRESS, NRF_SAADC);
#endif
#if defined(DT_NORDIC_NRF_SPI_SPI_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPI_SPI_0_BASE_ADDRESS, NRF_SPI0);
#endif
#if defined(DT_NORDIC_NRF_SPI_SPI_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPI_SPI_1_BASE_ADDRESS, NRF_SPI1);
#endif
#if defined(DT_NORDIC_NRF_SPI_SPI_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPI_SPI_2_BASE_ADDRESS, NRF_SPI2);
#endif
#if defined(DT_NORDIC_NRF_SPIM_SPI_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIM_SPI_0_BASE_ADDRESS, NRF_SPIM0);
#endif
#if defined(DT_NORDIC_NRF_SPIM_SPI_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIM_SPI_1_BASE_ADDRESS, NRF_SPIM1);
#endif
#if defined(DT_NORDIC_NRF_SPIM_SPI_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIM_SPI_2_BASE_ADDRESS, NRF_SPIM2);
#endif
#if defined(DT_NORDIC_NRF_SPIM_SPI_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIM_SPI_3_BASE_ADDRESS, NRF_SPIM3);
#endif
#if defined(DT_NORDIC_NRF_SPIM_SPI_4_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIM_SPI_4_BASE_ADDRESS, NRF_SPIM4);
#endif
#if defined(DT_NORDIC_NRF_SPIS_SPI_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIS_SPI_0_BASE_ADDRESS, NRF_SPIS0);
#endif
#if defined(DT_NORDIC_NRF_SPIS_SPI_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIS_SPI_1_BASE_ADDRESS, NRF_SPIS1);
#endif
#if defined(DT_NORDIC_NRF_SPIS_SPI_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIS_SPI_2_BASE_ADDRESS, NRF_SPIS2);
#endif
#if defined(DT_NORDIC_NRF_SPIS_SPI_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_SPIS_SPI_3_BASE_ADDRESS, NRF_SPIS3);
#endif
#if defined(DT_INST_0_NORDIC_NRF_SPU_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_SPU_BASE_ADDRESS, NRF_SPU);
#endif
#if defined(DT_INST_0_NORDIC_NRF_TEMP_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_TEMP_BASE_ADDRESS, NRF_TEMP);
#endif
#if defined(DT_NORDIC_NRF_TIMER_TIMER_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TIMER_TIMER_0_BASE_ADDRESS, NRF_TIMER0);
#endif
#if defined(DT_NORDIC_NRF_TIMER_TIMER_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TIMER_TIMER_1_BASE_ADDRESS, NRF_TIMER1);
#endif
#if defined(DT_NORDIC_NRF_TIMER_TIMER_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TIMER_TIMER_2_BASE_ADDRESS, NRF_TIMER2);
#endif
#if defined(DT_NORDIC_NRF_TIMER_TIMER_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TIMER_TIMER_3_BASE_ADDRESS, NRF_TIMER3);
#endif
#if defined(DT_NORDIC_NRF_TIMER_TIMER_4_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TIMER_TIMER_4_BASE_ADDRESS, NRF_TIMER4);
#endif
#if defined(DT_NORDIC_NRF_TWI_I2C_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWI_I2C_0_BASE_ADDRESS, NRF_TWI0);
#endif
#if defined(DT_NORDIC_NRF_TWI_I2C_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWI_I2C_1_BASE_ADDRESS, NRF_TWI1);
#endif
#if defined(DT_NORDIC_NRF_TWIM_I2C_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIM_I2C_0_BASE_ADDRESS, NRF_TWIM0);
#endif
#if defined(DT_NORDIC_NRF_TWIM_I2C_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIM_I2C_1_BASE_ADDRESS, NRF_TWIM1);
#endif
#if defined(DT_NORDIC_NRF_TWIM_I2C_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIM_I2C_2_BASE_ADDRESS, NRF_TWIM2);
#endif
#if defined(DT_NORDIC_NRF_TWIM_I2C_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIM_I2C_3_BASE_ADDRESS, NRF_TWIM3);
#endif
#if defined(DT_NORDIC_NRF_TWIS_I2C_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIS_I2C_0_BASE_ADDRESS, NRF_TWIS0);
#endif
#if defined(DT_NORDIC_NRF_TWIS_I2C_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIS_I2C_1_BASE_ADDRESS, NRF_TWIS1);
#endif
#if defined(DT_NORDIC_NRF_TWIS_I2C_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIS_I2C_2_BASE_ADDRESS, NRF_TWIS2);
#endif
#if defined(DT_NORDIC_NRF_TWIS_I2C_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_TWIS_I2C_3_BASE_ADDRESS, NRF_TWIS3);
#endif
#if defined(DT_NORDIC_NRF_UART_UART_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_UART_UART_0_BASE_ADDRESS, NRF_UART0);
#endif
#if defined(DT_NORDIC_NRF_UARTE_UART_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_UARTE_UART_0_BASE_ADDRESS, NRF_UARTE0);
#endif
#if defined(DT_NORDIC_NRF_UARTE_UART_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_UARTE_UART_1_BASE_ADDRESS, NRF_UARTE1);
#endif
#if defined(DT_NORDIC_NRF_UARTE_UART_2_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_UARTE_UART_2_BASE_ADDRESS, NRF_UARTE2);
#endif
#if defined(DT_NORDIC_NRF_UARTE_UART_3_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_UARTE_UART_3_BASE_ADDRESS, NRF_UARTE3);
#endif
#if defined(DT_INST_0_NORDIC_NRF_UICR_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_UICR_BASE_ADDRESS, NRF_UICR);
#endif
#if defined(DT_NORDIC_NRF_USBD_USBD_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_USBD_USBD_0_BASE_ADDRESS, NRF_USBD);
#endif
#if defined(DT_INST_0_NORDIC_NRF_VMC_BASE_ADDRESS)
CHECK_ADDRESS(DT_INST_0_NORDIC_NRF_VMC_BASE_ADDRESS, NRF_VMC);
#endif
#if defined(DT_NORDIC_NRF_WATCHDOG_WDT_0_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_WATCHDOG_WDT_0_BASE_ADDRESS, NRF_WDT0);
#endif
#if defined(DT_NORDIC_NRF_WATCHDOG_WDT_1_BASE_ADDRESS)
CHECK_ADDRESS(DT_NORDIC_NRF_WATCHDOG_WDT_1_BASE_ADDRESS, NRF_WDT1);
#endif
View git blame Copy permalink