zephyr/include/drivers/bluetooth/hci_driver.h

/** @file
 *  @brief Bluetooth HCI driver API.
 */

/*
 * Copyright (c) 2015-2016 Intel Corporation
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#ifndef ZEPHYR_INCLUDE_DRIVERS_BLUETOOTH_HCI_DRIVER_H_
#define ZEPHYR_INCLUDE_DRIVERS_BLUETOOTH_HCI_DRIVER_H_

/**
 * @brief HCI drivers
 * @defgroup bt_hci_driver HCI drivers
 * @ingroup bluetooth
 * @{
 */

#include <stdbool.h>
#include <net/buf.h>
#include <bluetooth/buf.h>
#include <bluetooth/hci_vs.h>
#include <device.h>

#ifdef __cplusplus
extern "C" {
#endif

enum {
	/* The host should never send HCI_Reset */
	BT_QUIRK_NO_RESET = BIT(0),
};

/* @brief The HCI event shall be given to bt_recv_prio */
#define BT_HCI_EVT_FLAG_RECV_PRIO BIT(0)
/* @brief  The HCI event shall be given to bt_recv. */
#define BT_HCI_EVT_FLAG_RECV      BIT(1)

/** @brief Get HCI event flags.
 *
 * Helper for the HCI driver to get HCI event flags that describes rules that.
 * must be followed.
 *
 * When CONFIG_BT_RECV_IS_RX_THREAD is enabled the flags
 * BT_HCI_EVT_FLAG_RECV and BT_HCI_EVT_FLAG_RECV_PRIO indicates if the event
 * should be given to bt_recv or bt_recv_prio.
 *
 * @param evt HCI event code.
 *
 * @return HCI event flags for the specified event.
 */
static inline uint8_t bt_hci_evt_get_flags(uint8_t evt)
{
	switch (evt) {
	case BT_HCI_EVT_DISCONN_COMPLETE:
		return BT_HCI_EVT_FLAG_RECV | BT_HCI_EVT_FLAG_RECV_PRIO;
		/* fallthrough */
#if defined(CONFIG_BT_CONN)
	case BT_HCI_EVT_NUM_COMPLETED_PACKETS:
	case BT_HCI_EVT_DATA_BUF_OVERFLOW:
		/* fallthrough */
#endif /* defined(CONFIG_BT_CONN) */
	case BT_HCI_EVT_CMD_COMPLETE:
	case BT_HCI_EVT_CMD_STATUS:
		return BT_HCI_EVT_FLAG_RECV_PRIO;
	default:
		return BT_HCI_EVT_FLAG_RECV;
	}
}

/**
 * @brief Receive data from the controller/HCI driver.
 *
 * This is the main function through which the HCI driver provides the
 * host with data from the controller. The buffer needs to have its type
 * set with the help of bt_buf_set_type() before calling this API.
 *
 * When CONFIG_BT_RECV_IS_RX_THREAD is defined then this API should not be used
 * for so-called high priority HCI events, which should instead be delivered to
 * the host stack through bt_recv_prio().
 *
 * @param buf Network buffer containing data from the controller.
 *
 * @return 0 on success or negative error number on failure.
 */
int bt_recv(struct net_buf *buf);

/**
 * @brief Receive high priority data from the controller/HCI driver.
 *
 * This is the same as bt_recv(), except that it should be used for
 * so-called high priority HCI events. There's a separate
 * bt_hci_evt_get_flags() helper that can be used to identify which events
 * have the BT_HCI_EVT_FLAG_RECV_PRIO flag set.
 *
 * As with bt_recv(), the buffer needs to have its type set with the help of
 * bt_buf_set_type() before calling this API. The only exception is so called
 * high priority HCI events which should be delivered to the host stack through
 * bt_recv_prio() instead.
 *
 * @param buf Network buffer containing data from the controller.
 *
 * @return 0 on success or negative error number on failure.
 */
int bt_recv_prio(struct net_buf *buf);

/** @brief Read static addresses from the controller.
 *
 *  @param addrs  Random static address and Identity Root (IR) array.
 *  @param size   Size of array.
 *
 *  @return Number of addresses read.
 */
uint8_t bt_read_static_addr(struct bt_hci_vs_static_addr addrs[], uint8_t size);

/** Possible values for the 'bus' member of the bt_hci_driver struct */
enum bt_hci_driver_bus {
	BT_HCI_DRIVER_BUS_VIRTUAL       = 0,
	BT_HCI_DRIVER_BUS_USB           = 1,
	BT_HCI_DRIVER_BUS_PCCARD        = 2,
	BT_HCI_DRIVER_BUS_UART          = 3,
	BT_HCI_DRIVER_BUS_RS232         = 4,
	BT_HCI_DRIVER_BUS_PCI           = 5,
	BT_HCI_DRIVER_BUS_SDIO          = 6,
	BT_HCI_DRIVER_BUS_SPI           = 7,
	BT_HCI_DRIVER_BUS_I2C           = 8,
	BT_HCI_DRIVER_BUS_IPM           = 9,
};

/**
 * @brief Abstraction which represents the HCI transport to the controller.
 *
 * This struct is used to represent the HCI transport to the Bluetooth
 * controller.
 */
struct bt_hci_driver {
	/** Name of the driver */
	const char *name;

	/** Bus of the transport (BT_HCI_DRIVER_BUS_*) */
	enum bt_hci_driver_bus bus;

	/** Specific controller quirks. These are set by the HCI driver
	 *  and acted upon by the host. They can either be statically
	 *  set at buildtime, or set at runtime before the HCI driver's
	 *  open() callback returns.
	 */
	uint32_t quirks;

	/**
	 * @brief Open the HCI transport.
	 *
	 * Opens the HCI transport for operation. This function must not
	 * return until the transport is ready for operation, meaning it
	 * is safe to start calling the send() handler.
	 *
	 * If the driver uses its own RX thread, i.e.
	 * CONFIG_BT_RECV_IS_RX_THREAD is set, then this
	 * function is expected to start that thread.
	 *
	 * @return 0 on success or negative error number on failure.
	 */
	int (*open)(void);

	/**
	 * @brief Send HCI buffer to controller.
	 *
	 * Send an HCI command or ACL data to the controller. The exact
	 * type of the data can be checked with the help of bt_buf_get_type().
	 *
	 * @note This function must only be called from a cooperative thread.
	 *
	 * @param buf Buffer containing data to be sent to the controller.
	 *
	 * @return 0 on success or negative error number on failure.
	 */
	int (*send)(struct net_buf *buf);
};

/**
 * @brief Register a new HCI driver to the Bluetooth stack.
 *
 * This needs to be called before any application code runs. The bt_enable()
 * API will fail if there is no driver registered.
 *
 * @param drv A bt_hci_driver struct representing the driver.
 *
 * @return 0 on success or negative error number on failure.
 */
int bt_hci_driver_register(const struct bt_hci_driver *drv);

/**
 * @brief Setup the HCI transport, which usually means to reset the
 * Bluetooth IC.
 *
 * @note A weak version of this function is included in the H4 driver, so
 *       defining it is optional per board.
 *
 * @param dev The device structure for the bus connecting to the IC
 *
 * @return 0 on success, negative error value on failure
 */
int bt_hci_transport_setup(struct device *dev);

/** Allocate an HCI event buffer.
 *
 * This function allocates a new buffer for an HCI event. It is given the
 * avent code and the total length of the parameters. Upon successful return
 * the buffer is ready to have the parameters encoded into it.
 *
 * @param evt        Event OpCode.
 * @param len        Length of event parameters.
 *
 * @return Newly allocated buffer.
 */
struct net_buf *bt_hci_evt_create(uint8_t evt, uint8_t len);

/** Allocate an HCI Command Complete event buffer.
 *
 * This function allocates a new buffer for HCI Command Complete event.
 * It is given the OpCode (encoded e.g. using the BT_OP macro) and the total
 * length of the parameters. Upon successful return the buffer is ready to have
 * the parameters encoded into it.
 *
 * @param op         Command OpCode.
 * @param plen       Length of command parameters.
 *
 * @return Newly allocated buffer.
 */
struct net_buf *bt_hci_cmd_complete_create(uint16_t op, uint8_t plen);

/** Allocate an HCI Command Status event buffer.
 *
 * This function allocates a new buffer for HCI Command Status event.
 * It is given the OpCode (encoded e.g. using the BT_OP macro) and the status
 * code. Upon successful return the buffer is ready to have the parameters
 * encoded into it.
 *
 * @param op         Command OpCode.
 * @param status     Status code.
 *
 * @return Newly allocated buffer.
 */
struct net_buf *bt_hci_cmd_status_create(uint16_t op, uint8_t status);

#ifdef __cplusplus
}
#endif

/**
 * @}
 */

#endif /* ZEPHYR_INCLUDE_DRIVERS_BLUETOOTH_HCI_DRIVER_H_ */