zephyr/drivers/sensor
Peter A. Bigot 403a7ab2c5 drivers: sensor: ccs811: support triggers
Add the standard suite of trigger configuration options.  Add driver
support for the DATA_READY and THRESHOLD triggers.  Note cross-module
dependency as configuring the trigger requires a controlled modification
of the sensor registers and the sensor driver API doesn't support this.

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2020-01-14 15:44:09 -06:00
..
adt7420 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
adxl362 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
adxl372 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
ak8975 drivers: sensor: ak8975: remove legacy reference to MPU6050 2020-01-08 16:40:04 +01:00
amg88xx drivers: amg88xx: check i2c write return value 2019-11-21 07:48:35 -06:00
ams_iAQcore kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
apds9960 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
bma280 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
bmc150_magn sensor: bmc150_magn: Convert to DTS 2019-11-08 07:44:54 -06:00
bme280 drivers: sensor: bme280: Add CS control when using SPI 2020-01-14 08:49:19 -06:00
bme680 kconfig: Remove some redundant single-item menus and ifs 2019-12-21 10:26:54 -05:00
bmg160 sensor: bmg160: Convert to DTS 2019-11-08 07:44:54 -06:00
bmi160 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
bmm150 sensor: bmm150: Convert to DTS 2019-11-08 07:44:54 -06:00
ccs811 drivers: sensor: ccs811: support triggers 2020-01-14 15:44:09 -06:00
dht sensor: dht: convert from Kconfig to devicetree 2019-12-19 06:43:37 -06:00
ens210 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
fxas21002 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
fxos8700 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
grove kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
hmc5883l sensor: hmc5883l: convert to device tree 2019-11-08 12:12:38 -06:00
hp206c sensor: hp206c: Convert to DTS 2019-11-08 07:44:54 -06:00
hts221 drivers: sensor: hts221: Return error on not supported channel 2020-01-08 12:59:46 -05:00
iis3dhhc kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
isl29035 sensor: isl29035: Convert to DTS 2019-11-08 07:44:54 -06:00
lis2dh sensors: lis2dh: use proper scale factor for lsm303agr 2019-11-13 14:43:25 -06:00
lis2ds12 global: Remove leading/trailing blank lines in files 2019-12-11 19:17:27 +01:00
lis2dw12 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
lis2mdl driver/sensor: lis2mdl: handle SPI 4-wires mode selection 2019-11-05 15:42:00 -06:00
lis3mdl sensors: lis3mdl: Fix warning when TIGGER_OWN_THREAD is enabled 2019-11-06 17:10:49 +01:00
lps22hb kconfig: Remove some redundant single-item menus and ifs 2019-12-21 10:26:54 -05:00
lps22hh sensors: lps2hh: Fix misspelled GPIOS_CONTROLLER references 2019-12-19 06:41:25 -06:00
lps25hb kconfig: Remove some redundant single-item menus and ifs 2019-12-21 10:26:54 -05:00
lsm6ds0 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
lsm6dsl kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
lsm6dso include: Fix use of <gpio.h> -> <drivers/gpio.h> 2019-12-10 08:39:37 -05:00
lsm9ds0_gyro kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
lsm9ds0_mfd kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
lsm303dlhc_magn kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
max30101 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
max44009 sensor: max44009: Convert to DTS 2019-11-08 07:44:54 -06:00
mcp9808 drivers: sensor: mcp9808: fix various problems and improve test 2020-01-08 20:33:51 -05:00
mpu6050 drivers: sensor: mpu6050: convert to devicetree 2020-01-08 16:40:04 +01:00
ms5607 sensor: add ms5607 sensor 2019-12-09 12:22:25 -06:00
ms5837 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
nrf5 drivers: clock_control: nrf: Switch to single clock device 2019-12-17 14:38:19 +01:00
opt3001 include: Fix use of <misc/FOO.h> -> <sys/FOO.h> 2019-12-10 08:39:37 -05:00
pms7003 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
qdec_nrfx kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
sht3xd kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
si7006 include: Fix use of <i2c.h> -> <drivers/i2c.h> 2019-12-10 08:39:37 -05:00
si7060 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
stts751 include: Fix use of <gpio.h> -> <drivers/gpio.h> 2019-12-10 08:39:37 -05:00
sx9500 sensor: sx9500: Convert to DTS 2019-11-08 07:44:54 -06:00
th02 sensor: th02: Convert to DTS 2019-11-08 07:44:54 -06:00
ti_hdc kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
tmp007 sensor: tmp007: fix read and use i2c_burst_read 2020-01-13 16:09:27 -06:00
tmp112 sensor: tmp112: Convert to DTS 2019-11-08 07:44:54 -06:00
tmp116 sensor: tmp116: Add support for tmp117, fix calculation issues 2019-12-20 20:18:25 -05:00
vl53l0x global: Remove leading/trailing blank lines in files 2019-12-11 19:17:27 +01:00
CMakeLists.txt subsys/shell: Introduce the Sensor Shell Module 2019-12-19 15:54:04 -05:00
Kconfig drivers: sensor: shell: Improved shell support for sensors 2020-01-08 12:59:46 -05:00
sensor_handlers.c kernel: Port remaining syscalls to new API 2019-09-12 11:31:50 +08:00
sensor_shell.c drivers: sensor: shell: Improved shell support for sensors 2020-01-08 12:59:46 -05:00