8a5f0b50eb
Add implementation to limit Extended Scanned data to a configurable maximum length when generating HCI reports. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
813 lines
22 KiB
Text
813 lines
22 KiB
Text
# Bluetooth Controller configuration options
|
|
|
|
# Copyright (c) 2016-2017 Nordic Semiconductor ASA
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
comment "BLE Controller support"
|
|
|
|
# The following symbols are enabled depending if the controller actually
|
|
# supports the respective features.
|
|
|
|
config BT_CTLR_LE_ENC_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_CONN_PARAM_REQ_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_EXT_REJ_IND_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_DATA_LEN_UPDATE_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_PRIVACY_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_EXT_SCAN_FP_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_PHY_UPDATE_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_PHY_2M_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_PHY_CODED_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_ADV_EXT_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_ADV_PERIODIC_SUPPORT
|
|
depends on BT_CTLR_ADV_EXT_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_SYNC_PERIODIC_SUPPORT
|
|
depends on BT_CTLR_ADV_EXT_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_ADV_ISO_SUPPORT
|
|
depends on BT_CTLR_ADV_PERIODIC_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_SYNC_ISO_SUPPORT
|
|
depends on BT_CTLR_SYNC_PERIODIC_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_CENTRAL_ISO_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_PERIPHERAL_ISO_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_CHAN_SEL_2_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_MIN_USED_CHAN_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_DTM_HCI_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_SMI_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_CONN_RSSI_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_ECDH_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR_READ_ISO_LINK_QUALITY_SUPPORT
|
|
depends on BT_CTLR_SYNC_ISO_SUPPORT || \
|
|
BT_CTLR_CENTRAL_ISO_SUPPORT || \
|
|
BT_CTLR_PERIPHERAL_ISO_SUPPORT
|
|
bool
|
|
|
|
config BT_CTLR
|
|
bool "Bluetooth Controller"
|
|
help
|
|
Enables support for SoC native controller implementations.
|
|
|
|
if BT_CTLR
|
|
|
|
choice BT_LL_CHOICE
|
|
prompt "Bluetooth Link Layer Selection"
|
|
help
|
|
Select the Bluetooth Link Layer to compile.
|
|
|
|
config BT_LL_SW_SPLIT
|
|
bool "Software-based BLE Link Layer"
|
|
select BT_RECV_IS_RX_THREAD
|
|
select ENTROPY_GENERATOR
|
|
select NRF_HW_TIMER0_RESERVED
|
|
select NRF_HW_RTC0_RESERVED
|
|
help
|
|
Use Zephyr software BLE Link Layer ULL LLL split implementation.
|
|
|
|
endchoice
|
|
|
|
comment "BLE Controller configuration"
|
|
|
|
config BT_CTLR_CRYPTO
|
|
bool "Enable crypto functions in Controller"
|
|
default y
|
|
select ENTROPY_GENERATOR
|
|
help
|
|
Use random number generation and AES encryption support functions
|
|
provided by the controller.
|
|
|
|
config BT_CTLR_HCI_VS_BUILD_INFO
|
|
string "Zephyr HCI VS Build Info string"
|
|
default ""
|
|
depends on BT_HCI_VS_EXT
|
|
help
|
|
User-defined string that will be returned by the Zephyr VS Read Build
|
|
Information command after the Zephyr version and build time. When
|
|
setting this to a value different from an empty string, a space
|
|
character is required at the beginning to separate it from the
|
|
already included information.
|
|
|
|
config BT_CTLR_AD_DATA_BACKUP
|
|
bool "Enable Legacy AD Data backup"
|
|
depends on BT_PERIPHERAL || BT_CTLR_ADV_EXT
|
|
default y
|
|
help
|
|
Backup Legacy Advertising Data when switching to Legacy Directed or
|
|
to Extended Advertising mode, and restore it when switching back to
|
|
Legacy Non-Directed Advertising mode.
|
|
Application can disable this feature if not using Directed
|
|
Advertising or switch between Legacy and Extended Advertising.
|
|
|
|
config BT_CTLR_HCI_ADV_HANDLE_MAPPING
|
|
bool "Enable advertising set handle mapping between HCI and LL"
|
|
depends on BT_CTLR_ADV_EXT
|
|
default y if BT_HCI_RAW
|
|
help
|
|
Enable mapping of advertising set handles between HCI and LL when
|
|
using external host since it can use arbitrary numbers as set handles
|
|
(as defined by Core specification) as opposed to LL which always uses
|
|
zero-based numbering. When using with Zephyr host this option can be
|
|
disabled to remove extra mapping logic.
|
|
|
|
config BT_CTLR_DUP_FILTER_LEN
|
|
int "Number of addresses in the scan duplicate filter"
|
|
depends on BT_OBSERVER
|
|
default 16
|
|
help
|
|
Set the number of unique BLE addresses that can be filtered as
|
|
duplicates while scanning.
|
|
|
|
config BT_CTLR_DUP_FILTER_ADV_SET_MAX
|
|
int "Number of Extended Advertising Sets in the scan duplicate filter"
|
|
depends on BT_OBSERVER && (BT_CTLR_DUP_FILTER_LEN > 0)
|
|
range 1 16
|
|
default 1
|
|
help
|
|
Set the number of unique Advertising Set ID per Bluetooth Low Energy
|
|
addresses that can be filtered as duplicates while Extended Scanning.
|
|
|
|
config BT_CTLR_MESH_SCAN_FILTERS
|
|
int "Number of Mesh scan filters"
|
|
depends on BT_HCI_MESH_EXT
|
|
default 1
|
|
range 1 15
|
|
help
|
|
Set the number of unique Mesh Scan Filters available as part of
|
|
the Intel Mesh Vendor Specific Extensions.
|
|
|
|
config BT_CTLR_MESH_SF_PATTERNS
|
|
int "Number of Mesh scan filter patterns"
|
|
depends on BT_HCI_MESH_EXT
|
|
default 15
|
|
range 1 15
|
|
help
|
|
Set the number of unique Mesh Scan Filter patterns available per
|
|
Scan Filter as part of the Intel Mesh Vendor Specific Extensions.
|
|
|
|
config BT_CTLR_RX_BUFFERS
|
|
int "Number of Rx buffers"
|
|
default 6 if BT_HCI_RAW
|
|
default 1
|
|
range 1 18
|
|
help
|
|
Set the number of Rx PDUs to be buffered in the controller. In a 7.5ms
|
|
connection interval and 2M PHY, maximum 18 packets with L2CAP payload
|
|
size of 1 byte can be received.
|
|
|
|
config BT_CTLR_ISO_RX_BUFFERS
|
|
int "Number of Isochronous Rx buffers"
|
|
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
|
|
default 8
|
|
range 1 30
|
|
help
|
|
Set the number of Isochronous Rx PDUs to be buffered in the
|
|
controller. Number of required RX buffers would worst-case be
|
|
the number of RX nodes prepared in one ISO event for each
|
|
active ISO group. This depends on the number of bursts in an
|
|
ISO group and number of groups, and may need to be set lower
|
|
that the theoretical maximum. Default of 8 is for supporting
|
|
two groups of 4 payloads, e.g. 2 CIGs with 2 CISes of BN=2.
|
|
|
|
config BT_CTLR_ISO_TX_BUFFERS
|
|
int "Number of Isochronous Tx buffers"
|
|
depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
|
|
range 1 19
|
|
default 3
|
|
help
|
|
Set the number of Isochronous Tx PDUs to be queued for transmission
|
|
in the controller.
|
|
|
|
config BT_CTLR_ISO_TX_BUFFER_SIZE
|
|
int "Isochronous Tx buffer size"
|
|
depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
|
|
range 1 4095
|
|
default 27
|
|
help
|
|
Size of the Isochronous Tx buffers and the value returned in HCI LE
|
|
Read Buffer Size V2 command response.
|
|
|
|
config BT_CTLR_ISO_VENDOR_DATA_PATH
|
|
bool "Enable vendor-specific ISO data path"
|
|
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
|
|
|
|
choice BT_CTLR_TX_PWR
|
|
prompt "Tx Power"
|
|
default BT_CTLR_TX_PWR_0
|
|
help
|
|
Select the supported BLE Radio transmit power level in dBm.
|
|
|
|
config BT_CTLR_TX_PWR_PLUS_8
|
|
bool "+8 dBm"
|
|
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
|
|
|
|
config BT_CTLR_TX_PWR_PLUS_7
|
|
bool "+7 dBm"
|
|
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
|
|
|
|
config BT_CTLR_TX_PWR_PLUS_6
|
|
bool "+6 dBm"
|
|
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
|
|
|
|
config BT_CTLR_TX_PWR_PLUS_5
|
|
bool "+5 dBm"
|
|
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
|
|
|
|
config BT_CTLR_TX_PWR_PLUS_4
|
|
bool "+4 dBm"
|
|
depends on SOC_SERIES_NRF51X || SOC_COMPATIBLE_NRF52X
|
|
|
|
config BT_CTLR_TX_PWR_PLUS_3
|
|
bool "+3 dBm"
|
|
depends on SOC_COMPATIBLE_NRF52X
|
|
|
|
config BT_CTLR_TX_PWR_PLUS_2
|
|
bool "+2 dBm"
|
|
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
|
|
|
|
config BT_CTLR_TX_PWR_0
|
|
bool "0 dBm"
|
|
|
|
config BT_CTLR_TX_PWR_MINUS_4
|
|
bool "-4 dBm"
|
|
|
|
config BT_CTLR_TX_PWR_MINUS_8
|
|
bool "-8 dBm"
|
|
|
|
config BT_CTLR_TX_PWR_MINUS_12
|
|
bool "-12 dBm"
|
|
|
|
config BT_CTLR_TX_PWR_MINUS_16
|
|
bool "-16 dBm"
|
|
|
|
config BT_CTLR_TX_PWR_MINUS_20
|
|
bool "-20 dBm"
|
|
|
|
config BT_CTLR_TX_PWR_MINUS_30
|
|
bool "-30 dBm"
|
|
depends on SOC_SERIES_NRF51X
|
|
|
|
config BT_CTLR_TX_PWR_MINUS_40
|
|
bool "-40 dBm"
|
|
depends on SOC_COMPATIBLE_NRF52X
|
|
|
|
endchoice
|
|
|
|
config BT_CTLR_TX_PWR_DYNAMIC_CONTROL
|
|
bool "Tx Power Dynamic Control"
|
|
depends on BT_HCI_VS_EXT
|
|
help
|
|
Enable dynamic control of Tx power per role/connection.
|
|
Provides HCI VS commands to set and get the current Tx
|
|
power on an individual role/connection basis.
|
|
|
|
comment "BLE Controller features"
|
|
|
|
if BT_CONN
|
|
|
|
config BT_CTLR_LE_ENC
|
|
bool "LE Encryption"
|
|
depends on BT_CTLR_LE_ENC_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetooth v4.0 LE Encryption feature in the
|
|
Controller.
|
|
|
|
config BT_CTLR_ECDH
|
|
bool "Elliptic Curve Diffie-Hellman (ECDH)"
|
|
depends on BT_CTLR_ECDH_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetoooth v4.2 Elliptic Curve Diffie-Hellman
|
|
feature in the controller.
|
|
|
|
config BT_CTLR_CONN_PARAM_REQ
|
|
bool "Connection Parameter Request"
|
|
depends on BT_CTLR_CONN_PARAM_REQ_SUPPORT
|
|
select BT_CTLR_EXT_REJ_IND
|
|
default y
|
|
help
|
|
Enable support for Bluetooth v4.1 Connection Parameter Request feature
|
|
in the Controller.
|
|
|
|
config BT_CTLR_EXT_REJ_IND
|
|
bool "Extended Reject Indication"
|
|
depends on BT_CTLR_EXT_REJ_IND_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetooth v4.1 Extended Reject Indication feature
|
|
in the Controller.
|
|
|
|
config BT_CTLR_PER_INIT_FEAT_XCHG
|
|
bool "Peripheral-initiated Features Exchange"
|
|
depends on BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetooth v4.1 Peripheral-initiated Features Exchange
|
|
feature in the Controller.
|
|
|
|
config BT_CTLR_LE_PING
|
|
bool "LE Ping"
|
|
depends on BT_CTLR_LE_ENC
|
|
default y
|
|
help
|
|
Enable support for Bluetooth v4.1 LE Ping feature in the Controller.
|
|
|
|
config BT_CTLR_DATA_LENGTH
|
|
# Hidden option to enable support for Bluetooth v4.2 LE Data Length
|
|
# Update procedure in the Controller.
|
|
bool
|
|
depends on BT_DATA_LEN_UPDATE && BT_CTLR_DATA_LEN_UPDATE_SUPPORT
|
|
default y
|
|
|
|
config BT_CTLR_DATA_LENGTH_MAX
|
|
int "Maximum data length supported"
|
|
depends on BT_CTLR_DATA_LENGTH
|
|
default 27
|
|
range 27 BT_BUF_ACL_RX_SIZE if BT_BUF_ACL_RX_SIZE < 251
|
|
range 27 251
|
|
help
|
|
Set the maximum data length of PDU supported in the Controller.
|
|
|
|
config BT_CTLR_PHY
|
|
# Hidden option to enable support for Bluetooth 5.0 PHY Update
|
|
# Procedure in the Controller.
|
|
bool
|
|
depends on BT_PHY_UPDATE && BT_CTLR_PHY_UPDATE_SUPPORT
|
|
select BT_CTLR_EXT_REJ_IND
|
|
default y
|
|
|
|
config BT_CTLR_MIN_USED_CHAN
|
|
bool "Minimum Number of Used Channels"
|
|
depends on BT_CTLR_MIN_USED_CHAN_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetooth 5.0 Minimum Number of Used Channels
|
|
Procedure in the Controller.
|
|
|
|
config BT_CTLR_CONN_RSSI
|
|
bool "Connection RSSI"
|
|
depends on BT_CTLR_CONN_RSSI_SUPPORT
|
|
default y if BT_HCI_RAW
|
|
help
|
|
Enable connection RSSI measurement.
|
|
|
|
config BT_CTLR_CHECK_SAME_PEER_CONN
|
|
bool
|
|
default BT_MAX_CONN > 1 && !BT_CTLR_ALLOW_SAME_PEER_CONN
|
|
|
|
endif # BT_CONN
|
|
|
|
config BT_CTLR_FILTER_ACCEPT_LIST
|
|
bool "Filter Accept List Support"
|
|
default y
|
|
help
|
|
Enable support for controller Filter Accept List feature
|
|
|
|
config BT_CTLR_PRIVACY
|
|
bool "LE Controller-based Privacy"
|
|
depends on BT_CTLR_PRIVACY_SUPPORT
|
|
default y
|
|
select BT_CTLR_FILTER_ACCEPT_LIST if BT_LL_SW_SPLIT
|
|
select BT_RPA
|
|
help
|
|
Enable support for Bluetooth v4.2 LE Controller-based Privacy feature
|
|
in the Controller.
|
|
|
|
config BT_CTLR_FAL_SIZE
|
|
int "LE Controller-based Privacy White List size"
|
|
depends on BT_CTLR_FILTER_ACCEPT_LIST
|
|
default 8
|
|
range 1 8 if (SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1_RISCV32)
|
|
range 1 16 if !(SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1_RISCV32)
|
|
help
|
|
Set the size of the Filter Accept List for LE Controller-based Privacy.
|
|
On nRF5x-based controllers, the hardware imposes a limit of 8 devices.
|
|
On OpenISA-based controllers, the hardware imposes a limit of 8 devices.
|
|
|
|
config BT_CTLR_RL_SIZE
|
|
int "LE Controller-based Privacy Resolving List size"
|
|
depends on BT_CTLR_PRIVACY
|
|
default 8
|
|
range 1 8 if SOC_COMPATIBLE_NRF
|
|
range 1 8 if SOC_OPENISA_RV32M1_RISCV32
|
|
help
|
|
Set the size of the Resolving List for LE Controller-based Privacy.
|
|
On nRF5x-based controllers, the hardware imposes a limit of 8 devices.
|
|
On OpenISA-based controllers, the hardware imposes a limit of 8 devices.
|
|
|
|
config BT_CTLR_EXT_SCAN_FP
|
|
bool "LE Extended Scanner Filter Policies"
|
|
depends on BT_OBSERVER && BT_CTLR_EXT_SCAN_FP_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetooth v4.2 LE Extended Scanner Filter Policies
|
|
in the Controller.
|
|
|
|
config BT_CTLR_PHY_2M
|
|
bool "2Mbps PHY Support"
|
|
depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_2M_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetooth 5.0 2Mbps PHY in the Controller.
|
|
|
|
config BT_CTLR_PHY_CODED
|
|
bool "Coded PHY Support"
|
|
depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_CODED_SUPPORT
|
|
default y if BT_HCI_RAW
|
|
help
|
|
Enable support for Bluetooth 5.0 Coded PHY in the Controller.
|
|
|
|
config BT_CTLR_CHAN_SEL_2
|
|
bool "Channel Selection Algorithm #2"
|
|
depends on (BT_CONN || (BT_BROADCASTER && BT_CTLR_ADV_EXT) || BT_CTLR_ADV_PERIODIC || BT_CTLR_SYNC_PERIODIC) && BT_CTLR_CHAN_SEL_2_SUPPORT
|
|
default y
|
|
help
|
|
Enable support for Bluetooth 5.0 LE Channel Selection Algorithm #2 in
|
|
the Controller.
|
|
|
|
config BT_CTLR_ADV_EXT
|
|
bool "LE Advertising Extensions" if !BT_LL_SW_SPLIT
|
|
depends on BT_CTLR_ADV_EXT_SUPPORT
|
|
select BT_CTLR_CHAN_SEL_2 if BT_LL_SW_SPLIT && BT_BROADCASTER
|
|
select BT_CTLR_SCAN_REQ_NOTIFY if BT_LL_SW_SPLIT && BT_BROADCASTER
|
|
# Enable by default for BT_LL_SW_SPLIT when "LE Advertising Set Terminated event" is implemented
|
|
default y if BT_EXT_ADV && !BT_LL_SW_SPLIT
|
|
help
|
|
Enable support for Bluetooth 5.0 LE Advertising Extensions in the
|
|
Controller.
|
|
|
|
config BT_CTLR_ADV_EXT
|
|
prompt "LE Advertising Extensions [EXPERIMENTAL]" if BT_LL_SW_SPLIT
|
|
select EXPERIMENTAL if BT_LL_SW_SPLIT
|
|
|
|
if BT_CTLR_ADV_EXT
|
|
|
|
config BT_CTLR_ADV_SET
|
|
int "LE Advertising Extensions Sets"
|
|
depends on BT_BROADCASTER
|
|
range 1 64
|
|
default BT_EXT_ADV_MAX_ADV_SET if BT_EXT_ADV
|
|
help
|
|
Maximum supported advertising sets.
|
|
|
|
config BT_CTLR_ADV_DATA_LEN_MAX
|
|
int "Maximum Advertising Data Length"
|
|
range 31 1650
|
|
help
|
|
Maximum Extended Advertising Data Length.
|
|
|
|
config BT_CTLR_ADV_EXT_RX_PDU_LEN_MAX
|
|
int "Maximum Advertising Extensions Receive PDU Length"
|
|
range 255 255 if BT_HCI_RAW
|
|
range 31 255
|
|
default 255
|
|
help
|
|
Maximum Advertising Extensions Receive PDU Length.
|
|
|
|
config BT_CTLR_SCAN_DATA_LEN_MAX
|
|
int "Maximum Extended Scanning Data Length"
|
|
depends on BT_OBSERVER
|
|
range 31 1650
|
|
help
|
|
Maximum Extended Scanning Data Length.
|
|
|
|
config BT_CTLR_ADV_PERIODIC
|
|
bool "LE Periodic Advertising in Advertising State" if !BT_LL_SW_SPLIT
|
|
depends on BT_BROADCASTER && BT_CTLR_ADV_PERIODIC_SUPPORT
|
|
select BT_CTLR_CHAN_SEL_2
|
|
default y if BT_PER_ADV
|
|
help
|
|
Enable support for Bluetooth 5.0 LE Periodic Advertising in the
|
|
Controller.
|
|
|
|
config BT_CTLR_ADV_PERIODIC
|
|
bool "LE Periodic Advertising in Advertising State [EXPERIMENTAL]" if BT_LL_SW_SPLIT
|
|
select EXPERIMENTAL if BT_LL_SW_SPLIT
|
|
|
|
config BT_CTLR_ADV_PERIODIC_ADI_SUPPORT
|
|
bool "Periodic Advertising ADI support"
|
|
depends on BT_CTLR_ADV_PERIODIC
|
|
default y
|
|
help
|
|
Enable support for adding AdvDataInfo in Periodic Advertising PDUs.
|
|
|
|
config BT_CTLR_SYNC_PERIODIC
|
|
bool "LE Periodic Advertising in Synchronization State" if !BT_LL_SW_SPLIT
|
|
depends on BT_OBSERVER && BT_CTLR_SYNC_PERIODIC_SUPPORT
|
|
select BT_CTLR_CHAN_SEL_2
|
|
default y if BT_PER_ADV_SYNC
|
|
help
|
|
Enable support for Bluetooth 5.0 LE Periodic Advertising in
|
|
Synchronization state in the Controller.
|
|
|
|
config BT_CTLR_SYNC_PERIODIC
|
|
bool "LE Periodic Advertising in Synchronization State [EXPERIMENTAL]" if BT_LL_SW_SPLIT
|
|
select EXPERIMENTAL if BT_LL_SW_SPLIT
|
|
|
|
config BT_CTLR_SYNC_PERIODIC_ADV_LIST
|
|
bool "LE Periodic Advertiser List support"
|
|
depends on BT_CTLR_SYNC_PERIODIC
|
|
default y
|
|
help
|
|
Enable support for LE Periodic Advertiser List support.
|
|
|
|
config BT_CTLR_SYNC_PERIODIC_ADV_LIST_SIZE
|
|
int "LE Periodic Advertiser List size"
|
|
depends on BT_CTLR_SYNC_PERIODIC_ADV_LIST
|
|
range 1 255
|
|
default 8
|
|
help
|
|
Set Periodic Advertiser List size, this will be return in the HCI LE
|
|
Read Periodic Advertiser List Command.
|
|
|
|
config BT_CTLR_SYNC_PERIODIC_ADI_SUPPORT
|
|
bool "Periodic Advertising Sync with ADI support (duplicate filtering)"
|
|
depends on BT_CTLR_SYNC_PERIODIC
|
|
default y
|
|
help
|
|
Enable support for duplicate filtering using AdvDataInfo present in
|
|
Periodic Advertising PDUs.
|
|
|
|
config BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
|
|
bool "LE Periodic Advertiser filtering by CTE type"
|
|
depends on BT_CTLR_SYNC_PERIODIC
|
|
default y
|
|
help
|
|
Enable filtering of periodic advertisements depending on type of
|
|
Constant Tone Extension.
|
|
|
|
config BT_CTLR_CHECK_SAME_PEER_SYNC
|
|
# Hidden Kconfig to add same peer synchronization check
|
|
bool
|
|
depends on BT_CTLR_SYNC_PERIODIC
|
|
default BT_PER_ADV_SYNC_MAX > 1
|
|
|
|
config BT_CTLR_ADV_ISO
|
|
bool "LE Broadcast Isochronous Channel advertising" if !BT_LL_SW_SPLIT
|
|
depends on BT_BROADCASTER && BT_CTLR_ADV_ISO_SUPPORT
|
|
select BT_CTLR_ADV_PERIODIC
|
|
select BT_CTLR_SET_HOST_FEATURE
|
|
help
|
|
Enable support for Bluetooth 5.2 LE Isochronous Advertising in the
|
|
Controller.
|
|
|
|
config BT_CTLR_ADV_ISO
|
|
bool "LE Broadcast Isochronous Channel advertising [EXPERIMENTAL]" if BT_LL_SW_SPLIT
|
|
select EXPERIMENTAL if BT_LL_SW_SPLIT
|
|
|
|
config BT_CTLR_SYNC_ISO
|
|
bool "LE Broadcast Isochronous Channel advertising sync" if !BT_LL_SW_SPLIT
|
|
depends on BT_OBSERVER && BT_CTLR_SYNC_ISO_SUPPORT
|
|
select BT_CTLR_SYNC_PERIODIC
|
|
select BT_CTLR_SET_HOST_FEATURE
|
|
help
|
|
Enable support for Bluetooth 5.2 LE Isochronous Advertising sync in
|
|
the Controller.
|
|
|
|
config BT_CTLR_SYNC_ISO
|
|
bool "LE Broadcast Isochronous Channel advertising sync [EXPERIMENTAL]" if BT_LL_SW_SPLIT
|
|
select EXPERIMENTAL if BT_LL_SW_SPLIT
|
|
|
|
config BT_CTLR_BROADCAST_ISO
|
|
bool
|
|
default BT_CTLR_ADV_ISO || BT_CTLR_SYNC_ISO
|
|
|
|
config BT_CTLR_ADV_ISO_SET
|
|
int "LE Isochronous Channel advertising sets"
|
|
depends on BT_CTLR_ADV_ISO
|
|
range 1 32
|
|
help
|
|
Maximum supported advertising sets.
|
|
|
|
config BT_CTLR_ADV_ISO_STREAM_MAX
|
|
int "Maximum supported Broadcast ISO Streams per Broadcast ISO group"
|
|
depends on BT_CTLR_ADV_ISO
|
|
range 1 31
|
|
help
|
|
Maximum supported Broadcast ISO Streams per Broadcast ISO group.
|
|
|
|
config BT_CTLR_ADV_ISO_STREAM_COUNT
|
|
int "Maximum Broadcast ISO Streams"
|
|
depends on BT_CTLR_ADV_ISO
|
|
range BT_CTLR_ADV_ISO_STREAM_MAX 64
|
|
help
|
|
Maximum Broadcast ISO Streams supported in the the Controller across
|
|
all Broadcast ISO groups.
|
|
|
|
config BT_CTLR_ADV_ISO_PDU_LEN_MAX
|
|
int "Maximum Broadcast Isochronous Channel PDU Length"
|
|
depends on BT_CTLR_ADV_ISO
|
|
range 27 251
|
|
default 251
|
|
help
|
|
Maximum Broadcast Isochronous Channel PDU Length.
|
|
|
|
config BT_CTLR_SYNC_ISO_STREAM_MAX
|
|
int "Maximum supported ISO Synchronized Receiver Streams per Broadcast ISO group"
|
|
depends on BT_CTLR_SYNC_ISO
|
|
range 1 31
|
|
help
|
|
Maximum supported ISO Synchronized Receiver Streams per Broadcast ISO
|
|
group.
|
|
|
|
config BT_CTLR_SYNC_ISO_STREAM_COUNT
|
|
int "Maximum ISO Synchronized Receiver Streams"
|
|
depends on BT_CTLR_SYNC_ISO
|
|
range BT_CTLR_SYNC_ISO_STREAM_MAX 64
|
|
help
|
|
Maximum ISO Synchronized Receiver Streams supported in the the
|
|
Controller across all Broadcast ISO groups.
|
|
|
|
config BT_CTLR_SYNC_ISO_PDU_LEN_MAX
|
|
int "Maximum Synchronized Isochronous Channel PDU Length"
|
|
depends on BT_CTLR_SYNC_ISO
|
|
range 251 251 if BT_HCI_RAW
|
|
range 27 251
|
|
default 251
|
|
help
|
|
Maximum Synchronized Receiver Isochronous Channel PDU Length.
|
|
|
|
endif # BT_CTLR_ADV_EXT
|
|
|
|
config BT_CTLR_SET_HOST_FEATURE
|
|
bool "LE Set Host Feature Command [EXPERIMENTAL]"
|
|
select EXPERIMENTAL
|
|
help
|
|
Enables optional LE Set Host Feature Command
|
|
|
|
config BT_CTLR_CENTRAL_ISO
|
|
bool "LE Connected Isochronous Stream Central" if !BT_LL_SW_SPLIT
|
|
depends on BT_CTLR_CENTRAL_ISO_SUPPORT && BT_CENTRAL
|
|
help
|
|
Enable support for Bluetooth 5.2 LE Connected Isochronous Stream
|
|
Central role in the Controller.
|
|
|
|
config BT_CTLR_CENTRAL_ISO
|
|
bool "LE Connected Isochronous Stream Central [EXPERIMENTAL]" if BT_LL_SW_SPLIT
|
|
select BT_CTLR_SET_HOST_FEATURE
|
|
select EXPERIMENTAL if BT_LL_SW_SPLIT
|
|
|
|
config BT_CTLR_PERIPHERAL_ISO
|
|
bool "LE Connected Isochronous Stream Peripheral" if !BT_LL_SW_SPLIT
|
|
depends on BT_CTLR_PERIPHERAL_ISO_SUPPORT && BT_PERIPHERAL
|
|
help
|
|
Enable support for Bluetooth 5.2 LE Connected Isochronous Stream
|
|
Peripheral role in the Controller.
|
|
|
|
config BT_CTLR_PERIPHERAL_ISO
|
|
bool "LE Connected Isochronous Stream Peripheral [EXPERIMENTAL]" if BT_LL_SW_SPLIT
|
|
select BT_CTLR_SET_HOST_FEATURE
|
|
select EXPERIMENTAL if BT_LL_SW_SPLIT
|
|
|
|
config BT_CTLR_CONN_ISO
|
|
bool
|
|
default BT_CTLR_CENTRAL_ISO || BT_CTLR_PERIPHERAL_ISO
|
|
|
|
config BT_CTLR_CONN_ISO_STREAMS
|
|
int "LE Connected Isochronous Streams"
|
|
depends on BT_CTLR_CONN_ISO
|
|
range 1 64
|
|
default 2
|
|
help
|
|
Maximum supported total number of CISes.
|
|
|
|
config BT_CTLR_CONN_ISO_GROUPS
|
|
int "LE Connected Isochronous Groups"
|
|
depends on BT_CTLR_CONN_ISO
|
|
range 1 240
|
|
default 1
|
|
help
|
|
Maximum supported CIGs.
|
|
|
|
config BT_CTLR_CONN_ISO_STREAMS_PER_GROUP
|
|
int "LE Connected Isochronous Streams per Group"
|
|
depends on BT_CTLR_CONN_ISO
|
|
range 1 31
|
|
default 2
|
|
help
|
|
Maximum supported CISes per CIG.
|
|
|
|
config BT_CTLR_CONN_ISO_HCI_DATAPATH_SKIP_INVALID_DATA
|
|
bool "Do not pass invalid SDUs on HCI datapath"
|
|
depends on BT_CTLR_CONN_ISO
|
|
help
|
|
This allows for applications to decide whether to
|
|
forward invalid SDUs through HCI upwards.
|
|
|
|
config BT_CTLR_ISO
|
|
bool
|
|
default BT_CTLR_BROADCAST_ISO || BT_CTLR_CONN_ISO
|
|
|
|
config BT_CTLR_READ_ISO_LINK_QUALITY
|
|
bool "LE Read ISO Link Quality"
|
|
depends on BT_CTLR_READ_ISO_LINK_QUALITY_SUPPORT
|
|
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
|
|
help
|
|
Enable support for LE Read ISO Link Quality command.
|
|
|
|
config BT_CTLR_DTM
|
|
bool
|
|
help
|
|
Enable support for Direct Test Mode in the Controller.
|
|
|
|
config BT_CTLR_DTM_HCI
|
|
bool "Direct Test Mode over HCI"
|
|
depends on BT_CTLR_DTM_HCI_SUPPORT
|
|
select BT_CTLR_DTM
|
|
help
|
|
Enable support for Direct Test Mode over the HCI transport.
|
|
|
|
config BT_CTLR_SMI_RX
|
|
bool "Stable modulation index - Receiver"
|
|
depends on BT_CTLR_SMI_SUPPORT
|
|
help
|
|
Enable support for Bluetooth 5.0 SMI RX in the Controller.
|
|
|
|
config BT_CTLR_SMI_TX
|
|
bool "Stable modulation index - Transmitter"
|
|
depends on BT_CTLR_SMI_SUPPORT
|
|
help
|
|
Enable support for Bluetooth 5.0 SMI TX in the Controller.
|
|
|
|
config BT_CTLR_SMI_TX_SETTING
|
|
bool "Stable modulation index - Transmitter as setting"
|
|
depends on BT_CTLR_SMI_TX && BT_CTLR_SETTINGS
|
|
help
|
|
Enable support for Bluetooth 5.0 SMI TX through a system setting.
|
|
|
|
config BT_CTLR_HCI_CODEC_AND_DELAY_INFO
|
|
bool "Codecs and controller delay information commands"
|
|
help
|
|
Enable HCI commands to read information about supported
|
|
codecs, codec capabilities, and controller delay.
|
|
|
|
rsource "Kconfig.df"
|
|
rsource "Kconfig.ll_sw_split"
|
|
|
|
config BT_CTLR_ASSERT_HANDLER
|
|
bool "Application Defined Assertion Handler"
|
|
help
|
|
This option enables an application-defined sink for the
|
|
controller assertion mechanism. This must be defined in
|
|
application code as void \"bt_ctlr_assert_handle(char \*, int)\"
|
|
and will be invoked whenever the controller code encounters
|
|
an unrecoverable error.
|
|
|
|
config BT_CTLR_TEST
|
|
bool "Run in-system unit tests"
|
|
help
|
|
Run in-system unit tests
|
|
|
|
endif # BT_CTLR
|
|
|
|
config BT_CTLR_DEBUG_PINS_CPUAPP
|
|
bool "Bluetooth Controller Debug Pins"
|
|
depends on BOARD_NRF5340DK_NRF5340_CPUAPP
|
|
help
|
|
Route debug GPIO toggling for the BLE Controller. Enable this when
|
|
using Bluetooth Controller Debug Pins in co-processor and the main
|
|
processor needs to setup and/or route the signals.
|