michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/drivers/serial
History
Shlomi Vaknin 1b4f7e5651 drivers: uart: stm32: fix handling interrupt and async api in isr 
When using the uart driver with interrupt and async api
at the same time (instance for interrupt and instance for async),
the transmission complete interrupt was handled in the async
handling section, even when interrupt driven api is used.
This caused transmission to not work properly in interrupt mode.
The fix is to move the interrupt mode handling to the begginning
of the isr. If async mode is used then interrupt mode code
will not be run.

Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
2021-05-19 08:12:55 -05:00
..
CMakeLists.txt drivers: serial: add Renesas R-Car driver 2021-05-07 13:08:48 +02:00
Kconfig drivers: serial: add Renesas R-Car driver 2021-05-07 13:08:48 +02:00
Kconfig.altera_jtag kconfig: Turn pointless/confusing 'menuconfig's into 'config's 2019-10-22 13:53:06 -05:00
Kconfig.apbuart serial: apbuart interrupt support 2020-11-13 14:53:55 -08:00
Kconfig.cc13xx_cc26xx drivers: cc13xx_cc26xx: use DT_INST_FOREACH to reduce code duplication 2020-04-23 17:29:53 -05:00
Kconfig.cc32xx kconfig: Turn pointless/confusing 'menuconfig's into 'config's 2019-10-22 13:53:06 -05:00
Kconfig.cmsdk_apb kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.esp32 kconfig: Turn pointless/confusing 'menuconfig's into 'config's 2019-10-22 13:53:06 -05:00
Kconfig.gecko kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.imx drivers: serial: uart_imx: Convert driver to new DT_INST macros 2020-04-04 09:34:00 -05:00
Kconfig.leuart_gecko kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.litex kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.lpc11u6x drivers: serial: Add support for LPC11U6X UART controllers 2020-07-29 20:12:24 +02:00
Kconfig.mcux drivers: serial: uart_mcux: Convert to DT_INST 2020-04-14 17:52:31 -05:00
Kconfig.mcux_flexcomm drivers: uart: mcux_flexcomm: Convert to DT_INST 2020-04-28 16:54:30 -05:00
Kconfig.mcux_iuart drivers: serial: Add NXP IUART driver 2020-08-14 14:51:50 -05:00
Kconfig.mcux_lpsci drivers: uart: mcux_lpsci: Convert to DT_INST 2020-04-28 16:54:30 -05:00
Kconfig.mcux_lpuart drivers: uart: mcux_lpuart: Convert to DT_INST 2020-04-20 15:50:45 -05:00
Kconfig.miv drivers: serial: uart_miv: Fix build errors 2021-05-10 13:15:50 -05:00
Kconfig.msp432p4xx kconfig: Turn pointless/confusing 'menuconfig's into 'config's 2019-10-22 13:53:06 -05:00
Kconfig.native_posix drivers: serial: native_posix: Convert 2nd UART to be devicetree based 2021-02-18 09:06:21 +01:00
Kconfig.npcx driver: npcx7: fixed typo in Kconfig.npcx files. 2020-12-07 12:11:17 -05:00
Kconfig.nrfx drivers: serial: nrf_uarte: Conditionally call PPI driver 2021-05-07 12:11:32 +02:00
Kconfig.ns16550 drivers: uart_ns16550: Remove CMake-based templating 2021-04-22 15:30:24 -05:00
Kconfig.nuvoton drivers: serial: add support for Nuvoton series UART 2020-07-01 21:09:25 +02:00
Kconfig.pl011 drivers: pl011: add SBSA mode 2021-01-24 13:59:55 -05:00
Kconfig.psoc6 drivers: serial: psoc6: Add interrupts support 2021-04-27 09:27:45 -05:00
Kconfig.rcar drivers: serial: add Renesas R-Car driver 2021-05-07 13:08:48 +02:00
Kconfig.rtt drivers: serial: uart_rtt converted to devicetree 2020-09-03 21:51:28 +02:00
Kconfig.rv32m1_lpuart kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.sam0 kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
Kconfig.sifive drivers: serial: sifive: use interrupt-cell to set IRQ priority 2021-01-16 17:22:08 -05:00
Kconfig.stellaris arm: Removed support for CC2650 2020-01-18 09:27:55 -06:00
Kconfig.stm32 drivers: serial: implement stm32 uart async api 2021-01-18 19:07:29 +01:00
Kconfig.uart_sam drivers: serial: uart_sam: rework device tree support 2020-04-18 17:04:08 -05:00
Kconfig.usart_sam drivers: serial: usart_sam: rework device tree support 2020-04-18 17:04:08 -05:00
Kconfig.xlnx drivers: serial: add driver for the Xilinx UART Lite IP 2020-08-14 13:35:39 -05:00
Kconfig.xmc4xxx drivers: serial: add XMC seris UART support 2020-05-09 14:21:44 +02:00
leuart_gecko.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_altera_jtag_hal.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_apbuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_cc13xx_cc26xx.c pm: device: Align state names with system states 2021-05-07 18:35:12 -04:00
uart_cc32xx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_cmsdk_apb.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_esp32.c driver: uart: esp32: DT fix to allow uart2 2021-05-14 16:41:03 -04:00
uart_gecko.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_handlers.c device: Const-ify all device driver instance pointers 2020-09-02 13:48:13 +02:00
uart_imx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_liteuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_lpc11u6x.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_lpc11u6x.h device: Const-ify all device driver instance pointers 2020-09-02 13:48:13 +02:00
uart_mcux.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_mcux_flexcomm.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_mcux_iuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_mcux_lpsci.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_mcux_lpuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_miv.c drivers: serial: uart_miv: Fix build errors 2021-05-10 13:15:50 -05:00
uart_msp432p4xx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_native_posix.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_npcx.c pm: device: Align state names with system states 2021-05-07 18:35:12 -04:00
uart_nrfx_uart.c pm: device: Align state names with system states 2021-05-07 18:35:12 -04:00
uart_nrfx_uarte.c drivers: serial: nrf_uarte: Fix checkpatch issues 2021-05-17 16:23:11 +02:00
uart_ns16550.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_ns16550.h drivers: serial: ns16550: move header from /include/ 2019-06-25 15:27:00 -04:00
uart_nuvoton.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_pl011.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_psoc6.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_rcar.c drivers: serial: add Renesas R-Car driver 2021-05-07 13:08:48 +02:00
uart_rtt.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_rv32m1_lpuart.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_sam.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_sam0.c drivers: uart_sam0: add support for collision detection error 2021-05-03 19:57:07 -04:00
uart_sifive.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_stellaris.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_stm32.c drivers: uart: stm32: fix handling interrupt and async api in isr 2021-05-19 08:12:55 -05:00
uart_stm32.h drivers: serial: uart_stm32 converted to use the new kwork API. 2021-04-14 18:21:33 +02:00
uart_xlnx_ps.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_xlnx_uartlite.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
uart_xmc4xxx.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00
usart_sam.c drivers: serial: remove usage of device_pm_control_nop 2021-04-28 12:25:39 -04:00