michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/samples/bluetooth/mesh
History
Kumar Gala a1b77fd589 zephyr: replace zephyr integer types with C99 types 
git grep -l 'u\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/u\(8\|16\|32\|64\)_t/uint\1_t/g"
	git grep -l 's\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/s\(8\|16\|32\|64\)_t/int\1_t/g"

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-06-08 08:23:57 -05:00
..
boards samples: bluetooth: mesh: Move dts overlays under boards 2020-04-01 10:44:31 -04:00
src zephyr: replace zephyr integer types with C99 types 2020-06-08 08:23:57 -05:00
CMakeLists.txt samples: make find_package(Zephyr...) REQUIRED 2020-05-29 10:47:25 +02:00
microbit_gatt.conf Bluetooth: Mesh: Slab based segmentation handling 2020-03-19 15:54:26 +02:00
nrf51_qfaa.conf Bluetooth: Mesh: Slab based segmentation handling 2020-03-19 15:54:26 +02:00
prj.conf Bluetooth: Mesh: Clean up sample config 2019-12-09 17:13:41 +02:00
prj_bbc_microbit.conf Bluetooth: Mesh: Slab based segmentation handling 2020-03-19 15:54:26 +02:00
README.rst doc: Bluetooth: Documentation overhaul 2019-03-13 10:40:05 +01:00
sample.yaml samples: add test identifier 2019-03-29 17:44:11 -04:00

README.rst 

.. _ble_mesh:

Bluetooth: Mesh
###############

Overview
********

This sample demonstrates Bluetooth Mesh functionality. It has several
standard Mesh models, and supports provisioning over both the
Advertising and the GATT Provisioning Bearers (i.e. PB-ADV and PB-GATT).
The application also needs a functioning serial console, since that's
used for the Out-of-Band provisioning procedure.

Requirements
************

* A board with Bluetooth LE support, or
* QEMU with BlueZ running on the host

Building and Running
********************

This sample can be found under :zephyr_file:`samples/bluetooth/mesh` in the
Zephyr tree.

See :ref:`bluetooth samples section <bluetooth-samples>` for details on how
to run the sample inside QEMU.

For other boards, build and flash the application as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/bluetooth/mesh
   :board: <board>
   :goals: flash
   :compact:

Refer to your :ref:`board's documentation <boards>` for alternative
flash instructions if your board doesn't support the ``flash`` target.