2115b575a4
Some radio drivers need configuration before start-up. Up to now only the RF2XX drivers allowed this, but other radio drivers need this as well. In particular for setting EUI64 addresses. Signed-off-by: Markus Becker <markus.becker@tridonic.com>
121 lines
2.9 KiB
Plaintext
121 lines
2.9 KiB
Plaintext
# IEEE 802.15.4 driver configuration options
|
|
|
|
# Copyright (c) 2015 Intel Corporation
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
#
|
|
# IEEE 802.15.4 options
|
|
#
|
|
menuconfig IEEE802154
|
|
bool "IEEE 802.15.4 drivers options"
|
|
default y if NET_L2_IEEE802154 || NET_L2_OPENTHREAD
|
|
|
|
if IEEE802154
|
|
|
|
config IEEE802154_NET_IF_NO_AUTO_START
|
|
bool "Disable 802.15.4 interface auto-start"
|
|
help
|
|
This option allows user to set any configuration and/or filter before
|
|
the radio becomes operational. For instance, the EUI-64 value can be
|
|
configured using net_if_set_link_addr(iface, mac, 8,
|
|
NET_LINK_IEEE802154).
|
|
When all configurations are done net_if_up() has to be invoked to
|
|
bring the interface up.
|
|
|
|
This option can be useful when using OpenThread or Zigbee. If you
|
|
have any doubt about this option leave it as default value.
|
|
|
|
config IEEE802154_RAW_MODE
|
|
bool "Use IEEE 802.15.4 driver without the MAC stack"
|
|
select NET_RAW_MODE
|
|
help
|
|
This option enables using the drivers in a so-called "raw" mode,
|
|
i.e. without a MAC stack (the net L2 layer for 802.15.4 will not
|
|
be built). Used only for very specific cases, such as wpan_serial
|
|
and wpanusb samples.
|
|
|
|
config IEEE802154_RDEV
|
|
bool
|
|
help
|
|
PHY is a ranging-capable device (RDEV)
|
|
|
|
source "drivers/ieee802154/Kconfig.cc2520"
|
|
|
|
source "drivers/ieee802154/Kconfig.kw41z"
|
|
|
|
source "drivers/ieee802154/Kconfig.mcr20a"
|
|
|
|
source "drivers/ieee802154/Kconfig.nrf5"
|
|
|
|
source "drivers/ieee802154/Kconfig.cc1200"
|
|
|
|
source "drivers/ieee802154/Kconfig.cc13xx_cc26xx"
|
|
|
|
source "drivers/ieee802154/Kconfig.rf2xx"
|
|
|
|
source "drivers/ieee802154/Kconfig.dw1000"
|
|
|
|
menuconfig IEEE802154_UPIPE
|
|
bool "UART PIPE fake radio driver support for QEMU"
|
|
depends on (BOARD_QEMU_X86 || BOARD_QEMU_CORTEX_M3) && NETWORKING
|
|
select UART_PIPE
|
|
|
|
if IEEE802154_UPIPE
|
|
|
|
config IEEE802154_UPIPE_DRV_NAME
|
|
string "UART PIPE Driver name"
|
|
default "IEEE802154_UPIPE"
|
|
|
|
config IEEE802154_UPIPE_HW_FILTER
|
|
bool "Hw Filtering"
|
|
default y
|
|
help
|
|
This option assure the driver will process just frames addressed to him.
|
|
|
|
config IEEE802154_UPIPE_RANDOM_MAC
|
|
bool "Random MAC address"
|
|
default y
|
|
help
|
|
Generate a random MAC address dynamically.
|
|
|
|
if ! IEEE802154_UPIPE_RANDOM_MAC
|
|
|
|
config IEEE802154_UPIPE_MAC4
|
|
hex "MAC Address Byte 4"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 4 of the MAC address.
|
|
|
|
config IEEE802154_UPIPE_MAC5
|
|
hex "MAC Address Byte 5"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 5 of the MAC address.
|
|
|
|
config IEEE802154_UPIPE_MAC6
|
|
hex "MAC Address Byte 6"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 6 of the MAC address.
|
|
|
|
config IEEE802154_UPIPE_MAC7
|
|
hex "MAC Address Byte 7"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 7 of the MAC address.
|
|
|
|
endif # IEEE802154_UPIPE_RANDOM_MAC
|
|
|
|
endif # IEEE802154_UPIPE
|
|
|
|
module = IEEE802154_DRIVER
|
|
module-str = IEEE 802.15.4 driver
|
|
module-help = Sets log level for IEEE 802.15.4 Device Drivers.
|
|
source "subsys/logging/Kconfig.template.log_config"
|
|
|
|
endif # IEEE802154
|