zephyr/dts/xtensa/nxp/nxp_imx8.dtsi

/*
 * Copyright (c) 2021 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <xtensa/xtensa.dtsi>
#include <mem.h>
#include <zephyr/dt-bindings/clock/imx_ccm.h>
#include <zephyr/dt-bindings/dai/esai.h>

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "cdns,tensilica-xtensa-lx6";
			reg = <0>;

			#address-cells = <1>;
			#size-cells = <0>;

			clic: interrupt-controller@0 {
				compatible = "cdns,xtensa-core-intc";
				reg = <0>;
				interrupt-controller;
				#interrupt-cells = <3>;
			};
		};
	};

	irqsteer: interrupt-controller@510a0000 {
		compatible = "nxp,irqsteer-intc";
		reg = <0x510a0000 DT_SIZE_K(64)>;

		#size-cells = <0>;
		#address-cells = <1>;

		master0: interrupt-controller@0 {
			compatible = "nxp,irqsteer-master";
			reg = <0>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 19 0 0>;
		};

		master1: interrupt-controller@1 {
			compatible = "nxp,irqsteer-master";
			reg = <1>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 20 0 0>;
		};

		master2: interrupt-controller@2 {
			compatible = "nxp,irqsteer-master";
			reg = <2>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 21 0 0>;
		};

		master3: interrupt-controller@3 {
			compatible = "nxp,irqsteer-master";
			reg = <3>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 22 0 0>;
		};

		master4: interrupt-controller@4 {
			compatible = "nxp,irqsteer-master";
			reg = <4>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 23 0 0>;
		};

		master5: interrupt-controller@5 {
			compatible = "nxp,irqsteer-master";
			reg = <5>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 24 0 0>;
		};

		master6: interrupt-controller@6 {
			compatible = "nxp,irqsteer-master";
			reg = <6>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 25 0 0>;
		};

		master7: interrupt-controller@7 {
			compatible = "nxp,irqsteer-master";
			reg = <7>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupts-extended = <&clic 26 0 0>;
		};
	};

	sram0: memory@92400000 {
		device_type = "memory";
		compatible = "mmio-sram";
		reg = <0x92400000 DT_SIZE_K(512)>;
	};

	sram1: memory@92c00000 {
		device_type = "memory";
		compatible = "mmio-sram";
		reg = <0x92c00000 DT_SIZE_K(512)>;
	};

	edma0: dma@591f0000 {
		compatible = "nxp,edma";
		reg = <0x591f0000 (DT_SIZE_K(64) * 33)>;
		valid-channels = <6>, <7>, <14>, <15>;
		interrupts-extended = <&master6 58>, <&master6 58>,
				<&master5 29>, <&master5 29>;
		#dma-cells = <2>;
		status = "disabled";
	};

	sai1: dai@59050000 {
		compatible = "nxp,dai-sai";
		reg = <0x59050000 DT_SIZE_K(64)>;
		interrupt-parent = <&master5>;
		interrupts = <28>;
		dai-index = <1>;
		dmas = <&edma0 15 0>, <&edma0 14 0>;
		dma-names = "tx", "rx";
		status = "disabled";
	};

	esai0: dai@59010000 {
		compatible = "nxp,dai-esai";
		reg = <0x59010000 DT_SIZE_K(64)>;
		dmas = <&edma0 7 0>, <&edma0 6 0>;
		dma-names = "tx", "rx";
		esai-pin-modes = <ESAI_PIN_HCKR ESAI_PIN_DISCONNECTED>,
				<ESAI_PIN_HCKT ESAI_PIN_DISCONNECTED>,
				<ESAI_PIN_SDO4_SDI1 ESAI_PIN_DISCONNECTED>,
				<ESAI_PIN_SDO3_SDI2 ESAI_PIN_DISCONNECTED>,
				<ESAI_PIN_SDO2_SDI3 ESAI_PIN_DISCONNECTED>,
				<ESAI_PIN_SDO1 ESAI_PIN_DISCONNECTED>;
		status = "disabled";
	};

	/* LSIO MU2, used to interact with the SCFW */
	scu_mu: mailbox@5d1d0000 {
		reg = <0x5d1d0000 DT_SIZE_K(64)>;
	};

	scu: system-controller {
		ccm: clock-controller {
			compatible = "nxp,imx-ccm";
			#clock-cells = <3>;
		};

		iomuxc: iomuxc {
			compatible = "nxp,imx-iomuxc-scu";
			pinctrl: pinctrl {
				compatible = "nxp,imx8-pinctrl";
			};
		};
	};

	lpuart2: serial@5a080000 {
		compatible = "nxp,imx-lpuart", "nxp,kinetis-lpuart";
		reg = <0x5a080000 DT_SIZE_K(4)>;
		interrupt-parent = <&master4>;
		interrupts = <3>;
		/* this is actually LPUART2 clock but the macro indexing starts at 1 */
		clocks = <&ccm IMX_CCM_LPUART3_CLK 0x0 0x0>;
		status = "disabled";
	};
};