zephyr/drivers/dma/dma_intel_adsp_hda.c
Serhiy Katsyuba 41b3c71586 drivers: dma: intel_adsp_hda: Fix L1 exit condition
Transition to a low power DMI L1 state should be allowed only after all
pending DMA channels transfers have started.

Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
2024-03-15 08:59:12 +01:00

495 lines
14 KiB
C

/*
* Copyright (c) 2022 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @brief Intel ADSP HDA DMA (Stream) driver
*
* HDA is effectively, from the DSP, a ringbuffer (fifo) where the read
* and write positions are maintained by the hardware and the software may
* commit read/writes by writing to another register (DGFPBI) the length of
* the read or write.
*
* It's important that the software knows the position in the ringbuffer to read
* or write from. It's also important that the buffer be placed in the correct
* memory region and aligned to 128 bytes. Lastly it's important the host and
* dsp coordinate the order in which operations takes place. Doing all that
* HDA streams are a fantastic bit of hardware and do their job well.
*
* There are 4 types of streams, with a set of each available to be used to
* communicate to or from the Host or Link. Each stream set is uni directional.
*/
#include <zephyr/drivers/dma.h>
#include "dma_intel_adsp_hda.h"
#include <intel_adsp_hda.h>
int intel_adsp_hda_dma_host_in_config(const struct device *dev,
uint32_t channel,
struct dma_config *dma_cfg)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
struct dma_block_config *blk_cfg;
uint8_t *buf;
int res;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
__ASSERT(dma_cfg->block_count == 1,
"HDA does not support scatter gather or chained "
"block transfers.");
__ASSERT(dma_cfg->channel_direction == cfg->direction,
"Unexpected channel direction, HDA host in supports "
"MEMORY_TO_HOST");
blk_cfg = dma_cfg->head_block;
buf = (uint8_t *)(uintptr_t)(blk_cfg->source_address);
res = intel_adsp_hda_set_buffer(cfg->base, cfg->regblock_size, channel, buf,
blk_cfg->block_size);
if (res == 0) {
*DGMBS(cfg->base, cfg->regblock_size, channel) =
blk_cfg->block_size & HDA_ALIGN_MASK;
intel_adsp_hda_set_sample_container_size(cfg->base, cfg->regblock_size, channel,
dma_cfg->source_data_size);
}
return res;
}
int intel_adsp_hda_dma_host_out_config(const struct device *dev,
uint32_t channel,
struct dma_config *dma_cfg)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
struct dma_block_config *blk_cfg;
uint8_t *buf;
int res;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
__ASSERT(dma_cfg->block_count == 1,
"HDA does not support scatter gather or chained "
"block transfers.");
__ASSERT(dma_cfg->channel_direction == cfg->direction,
"Unexpected channel direction, HDA host out supports "
"HOST_TO_MEMORY");
blk_cfg = dma_cfg->head_block;
buf = (uint8_t *)(uintptr_t)(blk_cfg->dest_address);
res = intel_adsp_hda_set_buffer(cfg->base, cfg->regblock_size, channel, buf,
blk_cfg->block_size);
if (res == 0) {
*DGMBS(cfg->base, cfg->regblock_size, channel) =
blk_cfg->block_size & HDA_ALIGN_MASK;
intel_adsp_hda_set_sample_container_size(cfg->base, cfg->regblock_size, channel,
dma_cfg->dest_data_size);
}
return res;
}
int intel_adsp_hda_dma_link_in_config(const struct device *dev,
uint32_t channel,
struct dma_config *dma_cfg)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
struct dma_block_config *blk_cfg;
uint8_t *buf;
int res;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
__ASSERT(dma_cfg->block_count == 1,
"HDA does not support scatter gather or chained "
"block transfers.");
__ASSERT(dma_cfg->channel_direction == cfg->direction,
"Unexpected channel direction, HDA link in supports "
"PERIPHERAL_TO_MEMORY");
blk_cfg = dma_cfg->head_block;
buf = (uint8_t *)(uintptr_t)(blk_cfg->dest_address);
res = intel_adsp_hda_set_buffer(cfg->base, cfg->regblock_size, channel, buf,
blk_cfg->block_size);
if (res == 0) {
intel_adsp_hda_set_sample_container_size(cfg->base, cfg->regblock_size, channel,
dma_cfg->dest_data_size);
}
return res;
}
int intel_adsp_hda_dma_link_out_config(const struct device *dev,
uint32_t channel,
struct dma_config *dma_cfg)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
struct dma_block_config *blk_cfg;
uint8_t *buf;
int res;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
__ASSERT(dma_cfg->block_count == 1,
"HDA does not support scatter gather or chained "
"block transfers.");
__ASSERT(dma_cfg->channel_direction == cfg->direction,
"Unexpected channel direction, HDA link out supports "
"MEMORY_TO_PERIPHERAL");
blk_cfg = dma_cfg->head_block;
buf = (uint8_t *)(uintptr_t)(blk_cfg->source_address);
res = intel_adsp_hda_set_buffer(cfg->base, cfg->regblock_size, channel, buf,
blk_cfg->block_size);
if (res == 0) {
intel_adsp_hda_set_sample_container_size(cfg->base, cfg->regblock_size, channel,
dma_cfg->source_data_size);
}
return res;
}
int intel_adsp_hda_dma_link_reload(const struct device *dev, uint32_t channel,
uint32_t src, uint32_t dst, size_t size)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
intel_adsp_hda_link_commit(cfg->base, cfg->regblock_size, channel, size);
return 0;
}
int intel_adsp_hda_dma_host_reload(const struct device *dev, uint32_t channel,
uint32_t src, uint32_t dst, size_t size)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
#if CONFIG_DMA_INTEL_ADSP_HDA_TIMING_L1_EXIT
const size_t buf_size = intel_adsp_hda_get_buffer_size(cfg->base, cfg->regblock_size,
channel);
if (!buf_size) {
return -EIO;
}
intel_adsp_force_dmi_l0_state();
switch (cfg->direction) {
case HOST_TO_MEMORY:
; /* Only statements can be labeled in C, a declaration is not valid */
const uint32_t rp = *DGBRP(cfg->base, cfg->regblock_size, channel);
const uint32_t next_rp = (rp + INTEL_HDA_MIN_FPI_INCREMENT_FOR_INTERRUPT) %
buf_size;
intel_adsp_hda_set_buffer_segment_ptr(cfg->base, cfg->regblock_size,
channel, next_rp);
intel_adsp_hda_enable_buffer_interrupt(cfg->base, cfg->regblock_size, channel);
break;
case MEMORY_TO_HOST:
;
const uint32_t wp = *DGBWP(cfg->base, cfg->regblock_size, channel);
const uint32_t next_wp = (wp + INTEL_HDA_MIN_FPI_INCREMENT_FOR_INTERRUPT) %
buf_size;
intel_adsp_hda_set_buffer_segment_ptr(cfg->base, cfg->regblock_size,
channel, next_wp);
intel_adsp_hda_enable_buffer_interrupt(cfg->base, cfg->regblock_size, channel);
break;
default:
break;
}
#endif
intel_adsp_hda_host_commit(cfg->base, cfg->regblock_size, channel, size);
return 0;
}
int intel_adsp_hda_dma_status(const struct device *dev, uint32_t channel,
struct dma_status *stat)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
bool xrun_det;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
uint32_t unused = intel_adsp_hda_unused(cfg->base, cfg->regblock_size, channel);
uint32_t used = *DGBS(cfg->base, cfg->regblock_size, channel) - unused;
stat->dir = cfg->direction;
stat->busy = *DGCS(cfg->base, cfg->regblock_size, channel) & DGCS_GBUSY;
stat->write_position = *DGBWP(cfg->base, cfg->regblock_size, channel);
stat->read_position = *DGBRP(cfg->base, cfg->regblock_size, channel);
stat->pending_length = used;
stat->free = unused;
switch (cfg->direction) {
case MEMORY_TO_PERIPHERAL:
xrun_det = intel_adsp_hda_is_buffer_underrun(cfg->base, cfg->regblock_size,
channel);
if (xrun_det) {
intel_adsp_hda_underrun_clear(cfg->base, cfg->regblock_size, channel);
return -EPIPE;
}
break;
case PERIPHERAL_TO_MEMORY:
xrun_det = intel_adsp_hda_is_buffer_overrun(cfg->base, cfg->regblock_size,
channel);
if (xrun_det) {
intel_adsp_hda_overrun_clear(cfg->base, cfg->regblock_size, channel);
return -EPIPE;
}
break;
default:
break;
}
return 0;
}
bool intel_adsp_hda_dma_chan_filter(const struct device *dev, int channel, void *filter_param)
{
uint32_t requested_channel;
if (!filter_param) {
return true;
}
requested_channel = *(uint32_t *)filter_param;
if (channel == requested_channel) {
return true;
}
return false;
}
int intel_adsp_hda_dma_start(const struct device *dev, uint32_t channel)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
uint32_t size;
bool set_fifordy;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
#if CONFIG_PM_DEVICE_RUNTIME
bool first_use = false;
enum pm_device_state state;
/* If the device is used for the first time, we need to let the power domain know that
* we want to use it.
*/
if (pm_device_state_get(dev, &state) == 0) {
first_use = state != PM_DEVICE_STATE_ACTIVE;
if (first_use) {
int ret = pm_device_runtime_get(dev);
if (ret < 0) {
return ret;
}
}
}
#endif
if (intel_adsp_hda_is_enabled(cfg->base, cfg->regblock_size, channel)) {
return 0;
}
set_fifordy = (cfg->direction == HOST_TO_MEMORY || cfg->direction == MEMORY_TO_HOST);
intel_adsp_hda_enable(cfg->base, cfg->regblock_size, channel, set_fifordy);
if (cfg->direction == MEMORY_TO_PERIPHERAL) {
size = intel_adsp_hda_get_buffer_size(cfg->base, cfg->regblock_size, channel);
intel_adsp_hda_link_commit(cfg->base, cfg->regblock_size, channel, size);
}
#if CONFIG_PM_DEVICE_RUNTIME
if (!first_use) {
return pm_device_runtime_get(dev);
}
#endif
return 0;
}
int intel_adsp_hda_dma_stop(const struct device *dev, uint32_t channel)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
__ASSERT(channel < cfg->dma_channels, "Channel does not exist");
if (!intel_adsp_hda_is_enabled(cfg->base, cfg->regblock_size, channel)) {
return 0;
}
intel_adsp_hda_disable(cfg->base, cfg->regblock_size, channel);
if (!WAIT_FOR(!intel_adsp_hda_is_enabled(cfg->base, cfg->regblock_size, channel), 1000,
k_busy_wait(1))) {
return -EBUSY;
}
return pm_device_runtime_put(dev);
}
static void intel_adsp_hda_channels_init(const struct device *dev)
{
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
for (uint32_t i = 0; i < cfg->dma_channels; i++) {
intel_adsp_hda_init(cfg->base, cfg->regblock_size, i);
if (intel_adsp_hda_is_enabled(cfg->base, cfg->regblock_size, i)) {
uint32_t size;
size = intel_adsp_hda_get_buffer_size(cfg->base, cfg->regblock_size, i);
intel_adsp_hda_disable(cfg->base, cfg->regblock_size, i);
intel_adsp_hda_link_commit(cfg->base, cfg->regblock_size, i, size);
}
}
#if CONFIG_DMA_INTEL_ADSP_HDA_TIMING_L1_EXIT
/* Configure interrupts */
if (cfg->irq_config) {
cfg->irq_config();
}
#endif
}
int intel_adsp_hda_dma_init(const struct device *dev)
{
struct intel_adsp_hda_dma_data *data = dev->data;
const struct intel_adsp_hda_dma_cfg *const cfg = dev->config;
data->ctx.dma_channels = cfg->dma_channels;
data->ctx.atomic = data->channels_atomic;
data->ctx.magic = DMA_MAGIC;
#ifdef CONFIG_PM_DEVICE_RUNTIME
if (pm_device_on_power_domain(dev)) {
pm_device_init_off(dev);
} else {
intel_adsp_hda_channels_init(dev);
pm_device_init_suspended(dev);
}
return pm_device_runtime_enable(dev);
#else
intel_adsp_hda_channels_init(dev);
return 0;
#endif
}
int intel_adsp_hda_dma_get_attribute(const struct device *dev, uint32_t type, uint32_t *value)
{
switch (type) {
case DMA_ATTR_BUFFER_ADDRESS_ALIGNMENT:
*value = DMA_BUF_ADDR_ALIGNMENT(
DT_COMPAT_GET_ANY_STATUS_OKAY(intel_adsp_hda_link_out));
break;
case DMA_ATTR_BUFFER_SIZE_ALIGNMENT:
*value = DMA_BUF_SIZE_ALIGNMENT(
DT_COMPAT_GET_ANY_STATUS_OKAY(intel_adsp_hda_link_out));
break;
case DMA_ATTR_COPY_ALIGNMENT:
*value = DMA_COPY_ALIGNMENT(DT_COMPAT_GET_ANY_STATUS_OKAY(intel_adsp_hda_link_out));
break;
case DMA_ATTR_MAX_BLOCK_COUNT:
*value = 1;
break;
default:
return -EINVAL;
}
return 0;
}
#ifdef CONFIG_PM_DEVICE
int intel_adsp_hda_dma_pm_action(const struct device *dev, enum pm_device_action action)
{
switch (action) {
case PM_DEVICE_ACTION_RESUME:
intel_adsp_hda_channels_init(dev);
break;
case PM_DEVICE_ACTION_SUSPEND:
case PM_DEVICE_ACTION_TURN_ON:
case PM_DEVICE_ACTION_TURN_OFF:
break;
default:
return -ENOTSUP;
}
return 0;
}
#endif
#define DEVICE_DT_GET_AND_COMMA(node_id) DEVICE_DT_GET(node_id),
void intel_adsp_hda_dma_isr(void)
{
#if CONFIG_DMA_INTEL_ADSP_HDA_TIMING_L1_EXIT
struct dma_context *dma_ctx;
const struct intel_adsp_hda_dma_cfg *cfg;
bool triggered_interrupts = false;
int i, j;
int expected_interrupts = 0;
const struct device *host_dev[] = {
#if CONFIG_DMA_INTEL_ADSP_HDA_HOST_OUT
DT_FOREACH_STATUS_OKAY(intel_adsp_hda_host_out, DEVICE_DT_GET_AND_COMMA)
#endif
#if CONFIG_DMA_INTEL_ADSP_HDA_HOST_IN
DT_FOREACH_STATUS_OKAY(intel_adsp_hda_host_in, DEVICE_DT_GET_AND_COMMA)
#endif
};
/*
* To initiate transfer, DSP must be in L0 state. Once the transfer is started, DSP can go
* to the low power L1 state, and the transfer will be able to continue and finish in L1
* state. Interrupts are configured to trigger after the first 32 bytes of data arrive.
* Once such an interrupt arrives, the transfer has already started. If all expected
* transfers have started, it is safe to allow the low power L1 state.
*/
for (i = 0; i < ARRAY_SIZE(host_dev); i++) {
dma_ctx = (struct dma_context *)host_dev[i]->data;
cfg = host_dev[i]->config;
for (j = 0; j < dma_ctx->dma_channels; j++) {
if (!atomic_test_bit(dma_ctx->atomic, j))
continue;
if (!intel_adsp_hda_is_buffer_interrupt_enabled(cfg->base,
cfg->regblock_size, j))
continue;
if (intel_adsp_hda_check_buffer_interrupt(cfg->base,
cfg->regblock_size, j)) {
triggered_interrupts = true;
intel_adsp_hda_disable_buffer_interrupt(cfg->base,
cfg->regblock_size, j);
intel_adsp_hda_clear_buffer_interrupt(cfg->base,
cfg->regblock_size, j);
} else {
expected_interrupts++;
}
}
}
/*
* Allow entering low power L1 state only after all enabled interrupts arrived, i.e.,
* transfers started on all channels.
*/
if (triggered_interrupts && expected_interrupts == 0) {
intel_adsp_allow_dmi_l1_state();
}
#endif
}