79e6b0e0f6
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>. This patch proposes to then include <zephyr/kernel.h> instead of <zephyr/zephyr.h> since it is more clear that you are including the Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a catch-all header that may be confusing. Most applications need to include a bunch of other things to compile, e.g. driver headers or subsystem headers like BT, logging, etc. The idea of a catch-all header in Zephyr is probably not feasible anyway. Reason is that Zephyr is not a library, like it could be for example `libpython`. Zephyr provides many utilities nowadays: a kernel, drivers, subsystems, etc and things will likely grow. A catch-all header would be massive, difficult to keep up-to-date. It is also likely that an application will only build a small subset. Note that subsystem-level headers may use a catch-all approach to make things easier, though. NOTE: This patch is **NOT** removing the header, just removing its usage in-tree. I'd advocate for its deprecation (add a #warning on it), but I understand many people will have concerns. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
74 lines
2.1 KiB
C
74 lines
2.1 KiB
C
/*
|
|
* Copyright (c) 2019 Marc Reilly
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#ifndef ST7789V_DISPLAY_DRIVER_H__
|
|
#define ST7789V_DISPLAY_DRIVER_H__
|
|
|
|
#include <zephyr/kernel.h>
|
|
|
|
#define ST7789V_CMD_NOP 0x00
|
|
#define ST7789V_CMD_SW_RESET 0x01
|
|
|
|
#define ST7789V_CMD_SLEEP_IN 0x10
|
|
#define ST7789V_CMD_SLEEP_OUT 0x11
|
|
#define ST7789V_CMD_INV_OFF 0x20
|
|
#define ST7789V_CMD_INV_ON 0x21
|
|
#define ST7789V_CMD_GAMSET 0x26
|
|
#define ST7789V_CMD_DISP_OFF 0x28
|
|
#define ST7789V_CMD_DISP_ON 0x29
|
|
|
|
#define ST7789V_CMD_CASET 0x2a
|
|
#define ST7789V_CMD_RASET 0x2b
|
|
#define ST7789V_CMD_RAMWR 0x2c
|
|
|
|
#define ST7789V_CMD_MADCTL 0x36
|
|
#define ST7789V_MADCTL_MY_TOP_TO_BOTTOM 0x00
|
|
#define ST7789V_MADCTL_MY_BOTTOM_TO_TOP 0x80
|
|
#define ST7789V_MADCTL_MX_LEFT_TO_RIGHT 0x00
|
|
#define ST7789V_MADCTL_MX_RIGHT_TO_LEFT 0x40
|
|
#define ST7789V_MADCTL_MV_REVERSE_MODE 0x20
|
|
#define ST7789V_MADCTL_MV_NORMAL_MODE 0x00
|
|
#define ST7789V_MADCTL_ML 0x10
|
|
#define ST7789V_MADCTL_RBG 0x00
|
|
#define ST7789V_MADCTL_BGR 0x08
|
|
#define ST7789V_MADCTL_MH_LEFT_TO_RIGHT 0x00
|
|
#define ST7789V_MADCTL_MH_RIGHT_TO_LEFT 0x04
|
|
|
|
#define ST7789V_CMD_COLMOD 0x3a
|
|
#define ST7789V_COLMOD_RGB_65K (0x5 << 4)
|
|
#define ST7789V_COLMOD_RGB_262K (0x6 << 4)
|
|
#define ST7789V_COLMOD_FMT_12bit (3)
|
|
#define ST7789V_COLMOD_FMT_16bit (5)
|
|
#define ST7789V_COLMOD_FMT_18bit (6)
|
|
|
|
#define ST7789V_CMD_RAMCTRL 0xb0
|
|
#define ST7789V_CMD_RGBCTRL 0xb1
|
|
#define ST7789V_CMD_PORCTRL 0xb2
|
|
#define ST7789V_CMD_CMD2EN 0xdf
|
|
#define ST7789V_CMD_DGMEN 0xba
|
|
#define ST7789V_CMD_GCTRL 0xb7
|
|
#define ST7789V_CMD_VCOMS 0xbb
|
|
|
|
#define ST7789V_CMD_LCMCTRL 0xc0
|
|
#define ST7789V_LCMCTRL_XMY 0x40
|
|
#define ST7789V_LCMCTRL_XBGR 0x20
|
|
#define ST7789V_LCMCTRL_XINV 0x10
|
|
#define ST7789V_LCMCTRL_XMX 0x08
|
|
#define ST7789V_LCMCTRL_XMH 0x04
|
|
#define ST7789V_LCMCTRL_XMV 0x02
|
|
|
|
#define ST7789V_CMD_VDVVRHEN 0xc2
|
|
#define ST7789V_CMD_VRH 0xc3
|
|
#define ST7789V_CMD_VDS 0xc4
|
|
#define ST7789V_CMD_FRCTRL2 0xc6
|
|
#define ST7789V_CMD_PWCTRL1 0xd0
|
|
|
|
#define ST7789V_CMD_PVGAMCTRL 0xe0
|
|
#define ST7789V_CMD_NVGAMCTRL 0xe1
|
|
|
|
#define ST7789V_CMD_NONE 0xff
|
|
|
|
#endif
|