zephyr/boards/arm/nucleo_g431rb/support/openocd.cfg
Francois Ramu 399d22b536 board: arm: nucleo_g431 support openocd
This adds the support of openocd for nucleo board stm32g431rb
It Requires the openocd that supports stm32G4xx
(zephyrproject-rtos/openocd#24)

Signed-off-by: Francois Ramu <francois.ramu@st.com>
2020-04-15 13:00:44 +02:00

7 lines
120 B
INI

source [find interface/stlink.cfg]
transport select hla_swd
source [find target/stm32g4x.cfg]
reset_config srst_only